Organotrifluoroborates as prosthetic groups for Single-Step F18-Labeling of Complex Molecules

Validation of a radiosynthesis method and a novel quality control system for [68 Ga]Ga-MAA: is TLC enough to assess radiopharmaceutical quality?

BACKGROUND

Technetium-99 m-labelled macroaggregated human serum albumin ([99mTc]Tc-MAA) is commonly used for lung perfusion scintigraphy. The European Pharmacopoeia (Eu.Ph.) specifies thin-layer chromatography (TLC) as the only method to assess its radiochemical purity (RCP). Similarly, TLC is the sole method reported in the literature to evaluate the RCP of Gallium-68-labelled MAA [68 Ga]Ga-MAA, recently introduced for lung perfusion PET/CT imaging. Since [68 Ga]Ga-MAA is prepared from commercial kits originally designed for the preparation of [99mTc]Tc-MAA, it is essential to optimize and validate the preparation methods for [68 Ga]Ga-MAA.

RESULTS

We tested a novel, simplified method for the preparation of [68 Ga]Ga-MAA that does not require organic solvents, prewash or final purification steps to remove radioactive impurities. We assessed the final product using radio-TLC, radio-UV-HPLC, and radio SDS-PAGE. Overall, our quality control (QC) method successfully detected [68 Ga]Ga-MAA along with all potential impurities, including free Ga-68, [68 Ga]Ga-HSA, unlabeled HSA, which may occur during labelling process and HEPES residual, a non-toxic but non-human-approved contaminant, used as buffer solution. We then applied our QC system to [68 Ga]Ga-MAA prepared under different conditions (25°-40°-75°-95 °C), thus defining the optimal temperature for labelling. Scanning Electron Microscopy (SEM) analysis of the products obtained through our novel method confirmed that most [68 Ga]Ga-MAA particles preserved the morphological structure and size distribution of unlabeled MAA, with a particle diameter range of 25-50 μm, assuring diagnostic efficacy.

CONCLUSIONS

We optimized a novel method to prepare [68 Ga]Ga-MAA through a QC system capable of monitoring all impurities of the final products.

Anion-Dependent Reactivity of Mono- and Dinuclear Boron Cations

The dinuclear bis(N-heterocyclic carbene) borane adduct 2 rapidly reacts with tritylium salts at room temperature but the outcome is strongly impacted by the respective counter-ion. Using tritylium tetrakis(perfluoro-tert-butoxy)aluminate affords - depending on the solvent - either the bis(boronium) ion 4 or the hydride-bridged dication 5. In case of tritylium hexafluorophosphate, however, H/F exchange occurs between boron and phosphorus yielding the dinuclear BF3 adduct 3 along with phosphorus dihydride trifluoride. H/F exchange also takes place when using the mononuclear N-heterocyclic carbene BH3 adduct 6 and hence provides a facile route to PH2 F3 , which is usually synthesized in more complex reaction sequences regularly involving toxic hydrogen fluoride. DFT calculations shed light on the H/F exchange between the borenium ion and the [PF6 ]- counter-ion and the computed mechanism features only small barriers in line with the experimental observations.

PET Imaging of Self-Assembled 18 F-Labelled Pd2 L4 Metallacages for Anticancer Drug Delivery

To advance the design of self-assembled metallosupramolecular architectures as new generation theranostic agents, the synthesis of ¹⁸ F-labelled [Pd₂ L₄ ]⁴⁺ metallacages is reported. Different spectroscopic and bio-analytical methods support the formation of the host-guest cage-cisplatin complex. The biodistribution profiles of one of the cages, alone or encapsulating cisplatin have been studied by PET/CT imaging in healthy mice in vivo, in combination to ICP-MS ex vivo.

Translating a radiolabeled imaging agent to the clinic

Molecular Imaging is entering the most fruitful, exciting period in its history with many new agents under development, and several reaching the clinic in recent years. While it is unusual for just one laboratory to take an agent from initial discovery through to full clinical approval the steps along the way are important to understand for all interested participants even if one is not involved in the entire process. Here, we provide an overview of these processes beginning at discovery and preclinical validation of a new molecular imaging agent and using as an exemplar a low molecular weight disease-specific targeted positron emission tomography (PET) agent. Compared to standard drug development requirements, molecular imaging agents may benefit from a regulatory standpoint from their low mass administered doses, they nonetheless still need to go through a series of well-defined steps before they can be considered for Phase 1 human testing. After outlining the discovery and preclinical validation approaches, we will also discuss the nuances of Phase 1, Phase 2 and Phase 3 studies that may culminate in an FDA general use approval. Finally, some post-approval aspects of novel molecular imaging agents are considered.

The Radiolabeled HER3 Targeting Molecules for Tumor Imaging

The human epidermal growth factor receptor (HER) family plays pivotal roles in physiologic and pathologic conditions (such as tumor growth, proliferation, and progression in multiple epithelial malignancies). All the family members are considered tyrosine kinase, while HER3 as a member of this family shows no intrinsic tyrosine kinase. HER3 is called ‘pseudokinase’ because it undergoes heterodimerization and forms dimers such as HER2-HER3 and HER1 (EGFR)-HER3. The exact role of HER3 in cancer is still unclear; however, the overexpression of this receptor is involved in the poor prognosis of malignancies. To that end, different studies investigated the development of radiotracers for imaging of HER3. The main focus of this review is to gather all the studies on developing new radiotracers for imaging of HER3.

High-Contrast CXCR4-Targeted 18F-PET Imaging Using a Potent and Selective Antagonist

C-X-C chemokine receptor 4 (CXCR4) is highly expressed in cancers, contributing to proliferation, metastasis, and a poor prognosis. The noninvasive imaging of CXCR4 can enable the detection and characterization of aggressive cancers with poor outcomes. Currently, no ¹⁸F-labeled CXCR4 positron emission tomography (PET) radiotracer has demonstrated imaging contrast comparable to [⁶⁸Ga]Ga-Pentixafor, a CXCR4-targeting radioligand. We, therefore, aimed to develop a high-contrast CXCR4-targeting radiotracer by incorporating a hydrophilic linker and trifluoroborate radioprosthesis to LY2510924, a known CXCR4 antagonist. A carboxy-ammoniomethyl-trifluoroborate (PepBF₃) moiety was conjugated to the LY2510924-derived peptide possessing a triglutamate linker via amide bond formation to obtain BL08, whereas an alkyne ammoniomethyl-trifluoroborate (AMBF₃) moiety was conjugated using the copper-catalyzed [3+2] cycloaddition click reaction to obtain BL09. BL08 and BL09 were radiolabeled with [¹⁸F]fluoride ion using ¹⁸F-¹⁹F isotope exchange. Pentixafor was radiolabeled with [⁶⁸Ga]GaCl₃. Side-by-side PET imaging and biodistribution studies were performed on immunocompromised mice bearing Daudi Burkitt lymphoma xenografts. The biodistribution of [¹⁸F]BL08 and [¹⁸F]BL09 showed tumor uptake at 2 h postinjection (p.i.) (5.67 ± 1.25%ID/g and 5.83 ± 0.92%ID/g, respectively), which were concordant with the results of PET imaging. [¹⁸F]BL08 had low background activity, providing tumor-to-blood, -muscle, and -liver ratios of 72 ± 20, 339 ± 81, and 14 ± 3 (2 h p.i.), respectively. [¹⁸F]BL09 behaved similarly, with ratios of 64 ± 20, 239 ± 72, and 17 ± 3 (2 h p.i.), respectively. This resulted in high-contrast visualization of tumors on PET imaging for both radiotracers. [¹⁸F]BL08 exhibited lower kidney uptake (2.2 ± 0.5%ID/g) compared to [¹⁸F]BL09 (7.6 ± 1.0%ID/g) at 2 h p.i. [¹⁸F]BL08 and [¹⁸F]BL09 demonstrated higher tumor-to-blood, -muscle, and -liver ratios compared to [⁶⁸Ga]Ga-Pentixafor (18.9 ± 2.7, 95.4 ± 36.7, and 5.9 ± 0.7 at 2 h p.i., respectively). In conclusion, [¹⁸F]BL08 and [¹⁸F]BL09 enable high-contrast visualization of CXCR4 expression in Daudi xenografts. Based on high tumor-to-organ ratios, [¹⁸F]BL08 may prove a valuable new tool for CXCR4-targeted PET imaging with potential for translation. The use of a PepBF₃ moiety is a new approach for the orthogonal conjugation of organotrifluoroborates for ¹⁸F-labeling of peptides.

Recent advances in development of dendritic polymer-based nanomedicines for cancer diagnosis

Dendritic polymers have highly branched three-dimensional architectures, the fourth type apart from linear, cross-linked, and branched one. They possess not only a large number of terminal functional units and interior cavities, but also a low viscosity with weak or no entanglement. These features endow them with great potential in various biomedicine applications, including drug delivery, gene therapy, tissue engineering, immunoassay and bioimaging. Most review articles related to bio-related applications of dendritic polymers focus on their drug or gene delivery, while very few of them are devoted to their function as cancer diagnosis agents, which are essential for cancer treatment. In this review, we will provide comprehensive insights into various dendritic polymer-based cancer diagnosis agents. Their classification and preparation are presented for readers to have a precise understanding of dendritic polymers. On account of physical/chemical properties of dendritic polymers and biological properties of cancer, we will suggest a few design strategies for constructing dendritic polymer-based diagnosis agents, such as active or passive targeting strategies, imaging reporters-incorporating strategies, and/or internal stimuli-responsive degradable/enhanced imaging strategies. Their recent applications in in vitro diagnosis of cancer cells or exosomes and in vivo diagnosis of primary and metastasis tumor sites with the aid of single/multiple imaging modalities will be discussed in great detail. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Diagnostic Tools > in vivo Nanodiagnostics and Imaging Diagnostic Tools > in vitro Nanoparticle-Based Sensing.

3-18F-fluoropropane-1-thiol and 18F-PEG4-1-thiol: Versatile prosthetic groups for radiolabeling maleimide functionalized peptides

The efficient radiosynthesis of biomolecules utilizing minute quantities of maleimide substrate is important for availability of novel peptide molecular imaging agents. We evaluated both 3-¹⁸F-fluoropropane-1-thiol and 2-(2-(2-(2-¹⁸F-fluoroethoxy)ethoxy)ethoxy)ethane-1-thiol (¹⁸F-fluoro-PEG₄ thiol) as prosthetic groups for radiolabeling under physiological conditions. The precursor employed a benzoate for protection of the thiol and an arylsulfonate leaving group. The radiofluorination was fully automated on an Eckert & Ziegler synthesis system using standard Kryptofix₂₂₂/K₂CO₃ conditions. In order to minimize the amount of biological molecule required for subsequent conjugation, the intermediates, S-(3-¹⁸F-fluoropropyl) benzothioate and ¹⁸F-fluoro-PEG₄ benzothioate, were purified by HPLC. The intermediates were isolated from the HPLC in yields of 37-47% and 28-35%, respectively, and retrieved from eluate using solid phase extraction. Treatment of the benzothioates with sodium methoxide followed by acetic acid provided the free thiols. The desired maleimide substrate in acetonitrile or phosphate buffer was then added and incubated at room temperature for 15 min. The final radiolabeled bioconjugate was purified on a separate HPLC or NAP-5 column. Maleimides utilized for the coupling reaction included phenyl maleimide, an Evans Blue maleimide derivative, a dimeric RGDfK maleimide (E[c(RGDfK)]₂), two aptamer maleimides, and PSMA maleimide derivative. Isolated radiochemical yields (non-decay corrected) of maleimide addition products based on starting ¹⁸F-fluoride ranged from 6 to 22% in a synthesis time of about 90 min. ¹⁸F-thiol prosthetic groups were further tested in vivo by conjugation to E[c(RGDfK)]₂ maleimide in a U87MG xenograft model. PET studies demonstrated similar tumor accumulation of both prosthetic groups. ¹⁸F-fluoro-PEG₄-S-E[c(RGDfK)]₂ displayed a somewhat favorable pharmacokinetics compared to ¹⁸F-fluoropropyl-S-E[c(RGDfK)]₂. Bone uptake was low for both indicating in vivo stability.

A Comprehensive Review of Non-Covalent Radiofluorination Approaches Using Aluminum [18F]fluoride: Will [18F]AlF Replace 68Ga for Metal Chelate Labeling?

Due to its ideal physical properties, fluorine-18 turns out to be a key radionuclide for positron emission tomography (PET) imaging, for both preclinical and clinical applications. However, usual biomolecules radiofluorination procedures require the formation of covalent bonds with fluorinated prosthetic groups. This drawback makes radiofluorination impractical for routine radiolabeling, gallium-68 appearing to be much more convenient for the labeling of chelator-bearing PET probes. In response to this limitation, a recent expansion of the 18F chemical toolbox gave aluminum [18F]fluoride chemistry a real prominence since the late 2000s. This approach is based on the formation of an [18F][AlF]2+ cation, complexed with a 9-membered cyclic chelator such as NOTA, NODA or their analogs. Allowing a one-step radiofluorination in an aqueous medium, this technique combines fluorine-18 and non-covalent radiolabeling with the advantage of being very easy to implement. Since its first reports, [18F]AlF radiolabeling approach has been applied to a wide variety of potential PET imaging vectors, whether of peptidic, proteic, or small molecule structure. Most of these [18F]AlF-labeled tracers showed promising preclinical results and have reached the clinical evaluation stage for some of them. The aim of this report is to provide a comprehensive overview of [18F]AlF labeling applications through a description of the various [18F]AlF-labeled conjugates, from their radiosynthesis to their evaluation as PET imaging agents.

Mapping aldehydic load in vivo by positron emission tomography with [18F]NA3BF3

A new radiotracer, [¹⁸F]NA₃BF₃, capable of rapid, stable, and catalyst-free complexation of aldehydes in vivo is reported. [¹⁸F]NA₃BF₃ was shown to bind aldehydes in live subjects using locally administered aldehyde-presenting microparticles, and was then applied to mapping aldehydic load in a mouse model of sepsis. [¹⁸F]NA₃BF₃ may enable the direct investigation of the chemical biology of aldehydes in living subjects, and may open avenues for the adoption of endogenous aldehydic load as an imaging biomarker of inflammatory pathology.

Fluorination of organoboron compounds

This review presents the methods available for the fluorination and radiofluorination of aromatic and aliphatic organoboron compounds.

Basic and practical concepts of radiopharmaceutical purification methods

The presence of radiochemical impurities in a radiopharmaceutical contributes to an unnecessary radiation burden for the patients or to an undesirable high radioactivity background, which reduces the imaging contrast or therapeutic efficacy. Therefore, if the radiolabeling process results in unsatisfactory radiochemical purity, a purification step is unavoidable. A successful purification process requires a profound knowledge about the radiopharmaceuticals of interest ranging from structural features to susceptibility to different conditions. Most radiopharmaceutical purification methods are based on solid-phase extraction (SPE), high-performance liquid chromatography (HPLC), size exclusion chromatography (SEC), ion-exchange chromatography (IEC), and liquid-liquid extraction (LLE). Here, we discuss the basic and applied concepts of these purifications methods as well as their advantages and limitations.