Gold nanoparticles-enhanced bisphenol A electrochemical biosensor based on tyrosinase immobilized onto self-assembled monolayers-modified gold electrode

Organic conjugated polymer nanoparticles enhanced tyrosinase electrochemical biosensor for selective, sensitive and rapid detection of bisphenol A

Bisphenol A (BPA) has been widely used in the production of polycarbonate (PC) plastics, flame retardants and epoxy resins, which is one of the most important endocrine disrupting chemicals and can cause damage to the estrogen system of human. In this work, organic conjugated polymer nanoparticles (CPNPs) were synthesized through nanoprecipitation method using liposome 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy (polyethylene glycol)-2000] (DSPE-mPEG2000) coated poly[(4,4'-bis(2-ethylhexyl)-dithieno[3,2-b:2',3'-d]silole)-2,6-diyl-alt-4,7-di(4-hexyl-2-thienyl)-5,6-difluoro-2,1,3-benzothiadiazole] (PDTS-hDTBT) and poly[(4,4'-bis(2-ethylhexyl)-dithieno[3,2-b:2',3'-d]silole)-2,6-diyl-alt-4,7-di(4-(2-ethylhexyl)-2-thienyl)-5,6-difluoro-2,1,3-benzothiadiazole] (PDTS-ehDTBT). These two polymers have different side chains, which can affect the configuration of the polymers, thereby affecting the π-π interaction between BPA and CPNPs. The resultant two CPNPs were explored as extremely attractive matrix for tyrosinase immobilization to construct electrochemical biosensing platforms for sensitive and rapid detection of BPA in water environments. The electrochemical performance of these two biosensors was significantly enhanced, benefiting from the large specific surface area and excellent biocompatibility of CPNPs, as well as the strong π-π interaction between CPNPs and BPA. The current response of PDTS-ehDTBT-Tyr-Chi/GCE exhibited a good linear relationship with BPA concentration ranging from 0.02 to 3.0 μM with a low detection limit of 11.83 nM and a high sensitivity of 0.9724 μA μM-1 cm-2. The fabricated biosensor was further used for BPA detection in actual samples with a recovery rate of 92.0 %-99.4 %. With the remarkable advantages, CPNPs-based biosensor provides a highly sensitive detection tool for rapid detection of BPA in actual samples, which has broad application prospects.

Electrochemical (bio)sensors based on carbon quantum dots, ionic liquid and gold nanoparticles for bisphenol A

Electrochemical (bio)sensors were developed for bisphenol A (BPA) determination. Screen printed carbon electrode (SPCE) was modified with ionic liquid 1- butyl-3-methylimidazolium tetrafluoroborate (IL), carbon quantum dots (CQD) and gold nanoparticles (AuNP) for the fabrication of the BPA sensor. Electrode surface composition was optimized for the deposition time of AuNP, amount of CQD and percentage of IL using the central composite design (CCD) method. The results of the CCD study indicated that maximum amperometric response was recorded when 9.8 μg CQD, 3% IL and 284 s AuNP deposition time were used in modification. Tyrosinase (Ty) was further modified on the AuNP/CQD-IL/SPCE to fabricate the biosensor. Analytical performance characteristics of the BPA sensor were investigated by differential pulse anodic adsorptive stripping voltammetry and the AuNP/CQD-IL/SPCE sensor exhibited a linear response to BPA in the range of 2.0 × 10^-8 - 3.6 × 10^-6 M with a detection limit of 1.1 × 10^-8 M. Amperometric measurements showed that the linear dynamic range and detection limit of the Ty/AuNP/CQD-IL/SPCE were 2.0 × 10^-8 - 4.0 × 10^-6 M and 6.2 × 10^-9 M, respectively. Analytical performance characteristics such as sensitivity, reproducibility and selectivity were investigated for the presented (bio)sensors. The analytical applicability of the (bio)sensors to the analysis of BPA in mineral water samples was also tested.

Polyphenol oxidase-based electrochemical biosensors: A review

The detection of phenolic compounds is relevant not only for their possible benefits to human health but also for their role as chemical pollutants, including as endocrine disruptors. The required monitoring of such compounds on-site or in field analysis can be performed with electrochemical biosensors made with polyphenol oxidases (PPO). In this review, we describe biosensors containing the oxidases tyrosinase and laccase, in addition to crude extracts and tissues from plants as enzyme sources. From the survey in the literature, we found that significant advances to obtain sensitive, robust biosensors arise from the synergy reached with a diversity of nanomaterials employed in the matrix. These nanomaterials are mostly metallic nanoparticles and carbon nanostructures, which offer a suitable environment to preserve the activity of the enzymes and enhance electron transport. Besides presenting a summary of contributions to electrochemical biosensors containing PPOs in the last five years, we discuss the trends and challenges to take these biosensors to the market, especially for biomedical applications.

Detection of Bisphenol A Using DNA-Functionalized Graphene Field Effect Transistors Integrated in Microfluidic Systems

Bisphenol A (BPA) detection has attracted much attention recently for its importance to food safety and environment. The DNA-functionalized solution-gated graphene transistors are integrated in microfluidic systems and used for recycling detections of BPA for the first time. In the presence of BPA, both single- and double-stranded DNA molecules are detached and released from the graphene surface in aqueous solutions, leading to the change of device electrical performance. The channel currents of the devices change monotonically with the concentration of BPA. Moreover, the devices modified with double-stranded DNA are more sensitive to BPA and show the detection limit down to 10 ng/mL. The highly sensitive label-free BPA sensors are expected to be used for convenient BPA detections in many applications.

Advances in sensing and biosensing of bisphenols: A review

Bisphenols (BPs) are well known endocrine disrupting chemicals (EDCs) that cause adverse effects on the environment, biotic life and human health. BPs have been studied extensively because of an increasing concern for the safety of the environment and for human health. They are major raw materials for manufacturing polycarbonates, thermal papers and epoxy resins and are considered hazardous environmental contaminants. A vast array of sensors and biosensors have been developed for the sensitive screening of BPs based on carbon nanomaterials (carbon nanotubes, fullerenes, graphene and graphene oxide), quantum dots, metal and metal oxide nanocomposites, polymer nanocomposites, metal organic frameworks, ionic liquids and molecularly imprinted polymers. This review is devoted mainly to a variety of sensitive, selective and reliable sensing and biosensing methods for the detection of BPs using electrochemistry, fluorescence, colorimetry, surface plasmon resonance, luminescence, ELISAs, circular dichroism, resonance Rayleigh scattering and adsorption techniques in plastic products, food samples, food packaging, industrial wastes, pharmaceutical products, human body fluids and many other matrices. It summarizes the advances in sensing and biosensing methods for the detection of BPs since 2010. Furthermore, the article discusses challenges and future perspectives in the development of novel sensing methods for the detection of BP analogs.

Response Characteristics of Bisphenols on a Metal-Organic Framework-Based Tyrosinase Nanosensor

Bisphenols (BPs), which have more than ten kinds of structural analogues, are emerging as the most important endocrine disrupting chemicals that adversely affect human health and aquatic life. A tyrosinase nanosensor based on metal-organic frameworks (MOFs) and chitosan was developed to investigate the electrochemical response characteristics and mechanisms of nine kinds of BPs for the first time. The developed tyrosinase nanosensor showed a sensitive response to bisphenol A, bisphenol F, bisphenol E, bisphenol B, and bisphenol Z, and the responsive sensitivities were highly dependent on their respective log Kow values. However, the nanosensor showed no response to bisphenol S (BPS), bisphenol AP (BPAP), bisphenol AF (BPAF), or tetrabromobisphenol A, although BPS, BPAP, and BPAF have structures similar to those of the responsive BPs. The obtained results reveal that the electrochemical response of different BPs is affected not only by the molecular structure, especially the available ortho positions of phenolic hydroxyl groups, but also by the substituent group properties (electron acceptor or electron donor) on the bisphenol framework. The electronic cloud distribution of the phenolic hydroxyl groups, which is affected by the substituent group, determines whether the available ortho positions of phenolic hydroxyl groups can be oxidized by the tyrosinase biosensor. These response mechanisms are very significant as they can be used for predicting the response characteristics of many BPs and their various derivatives and metabolites on biosensors. The unexpected anti-interference ability of the biosensor to nine heavy metal ions was also discovered and discussed. The MOF-chitosan nanocomposite proves to be a promising sensing platform for the construction of diverse biosensors for selective detection of targets even in the presence of a high concentration of heavy metal ions.

Tyrosinase-based biosensor for determination of bisphenol A in a flow-batch system

A tyrosinase-based amperometric biosensor is proposed for determination of bisphenol A (BPA) in a flow-batch monosegmented sequential injection system. The enzyme was entrapped in a sol-gel TiO2 matrix modified with multi-walled carbon nanotubes (MWCNTs), polycationic polymer poly(diallyldimethylammonium chloride), (PDDA) and Nafion. Morphology of TYR/TiO2/MWCNTs/PDDA/Nafion matrix composite was studied via scanning electron microscopy (SEM). Electrochemical behavior of the developed biosensor towards bisphenol A was examined and analytical characteristics were assessed with respect to linear range, biosensor sensitivity, limit of detection, long term stability, repeatability and reproducibility. Linear range of biosensor response was found between 0.28 and 45.05 µM with high sensitivity of 3263 µA mM(-1) cm(-2) and detection limit 0.066 µM. The approach was successfully employed for determination of BPA in natural samples.

Construction of a nanostructure-based electrochemical sensor for voltammetric determination of bisphenol A

A novel carbon paste electrode modified with graphene oxide nanosheets and an ionic liquid (n-hexyl-3-methylimidazolium hexafluoro phosphate) was fabricated. The electrochemical study of the modified electrode, as well as its efficiency for voltammetric oxidation of bisphenol A, is described. The electrode was also employed to study the electrochemical oxidation of bisphenol A, using cyclic voltammetry, chronoamperometry, square wave voltammetry and electrochemical impedance spectroscopy as diagnostic techniques. Square wave voltammetry exhibits a linear dynamic range from 9.0 × 10(-8) to 2.5 × 10(-4) M and a detection limit of 55.0 nM for bisphenol A. Finally, this new sensor was used for determination of bisphenol A in water samples using the standard addition method.

A nitrogen and sulfur co-doped graphene-supported nickel tetrapyridyloxyphthalocyanine hybrid fabricated by a solvothermal method and its application for the detection of bisphenol A

A novel hybrid consisting of nickel tetrapyridyloxyphthalocyanine (NiTPPc) and nitrogen and sulfur co-doped graphene (N-S-G) was obtained via a solvothermal method and applied for the determination of BPA.