A highly selective magnetic sensor with functionalized Fe/Fe 3 O 4 nanoparticles for detection of Pb 2+

A novel magnetic resonance tuning-magnetic relaxation switching sensor based on Gd-MOF/USPIO assembly for sensitive and convenient aflatoxin B1 detection

Aflatoxin B1 (AFB1) can accumulate in different organs or tissues and seriously harm humans. Traditional magnetic relaxation switching (MRS) sensors have relatively low sensitivity, but are complex to use. Rapid small-trace molecule analysis in complex samples is challenging. In this study, we used a gadolinium-based metal-organic framework (Gd-MOF) and ultra-small superparamagnetic iron oxide (USPIO) assembly to develop a magnetic resonance tuning-magnetic relaxation switching (MRET-MRS) sensor to improve conventional MRS sensor sensitivity and simplify operational steps in complex samples. Importantly, the local magnetic field generated by USPIO interfered with Gd-MOF electron spin fluctuation and directly affected dipole-dipole interactions between Gd electrons and water molecules, thus rendering relaxation signal changes more sensitive. The sensitivity (0.54 pg mL-1) was 833 times more sensitive than that of a conventional MRS sensor (0.45 ng mL-1). Finally, a convenient one-step detection approach can be achieved by mixing antigen/antibody functionalized Gd-MOF/USPIO and target samples.

Magnetic relaxation switching assay based on three-dimensional assembly of Fe3O4@ZIF-8 for detection of cadmium ions

The design and construction of a novel magnetic resonance switch (MRS) sensor for cadmium ion (Cd²⁺) detection is described. Fe₃O₄@ZIF-8 was synthesized through seed-mediated growth of dimercaptosuccinic acid-coated Fe₃O₄. Fe₃O₄@ZIF-8 with high relaxation value (163.086 mM⁻¹ s⁻¹) and large negative zeta potential (−20.69 mV) exhibited good magnetic relaxation performance and water solubility. The successfully synthesized Fe₃O₄@ZIF-8 was used to develop an immune recognition-based MOFs-MRS sensor for highly sensitive detection of Cd²⁺. The proposed MRS detected a wide linear range of Cd²⁺ concentration from 2 to 200 ng mL⁻¹ with a low limit of detection of 0.65 ng mL⁻¹ (S/N = 3), and displayed high selectivity towards matrix interference. The robust sensing system was effective even in a complex sample matrix, enabling the quantitative analysis of Cd²⁺ content in rice samples and drinking water samples with good reliability. Recoveries of Cd²⁺ ranged from 91.50 to 112.05% for spiked drinking water and from 95.86 to 110.45% for spiked rice samples. The versatility of Fe₃O₄@ZIF-8 with customized relaxation responses could allow the adaptation of magnetic resonance platforms for food safety purposes.

A sensitive immune recognition-based MOF-MRS sensor for the detection of Cd²⁺.

Synthesis and applications of surface-modified magnetic nanoparticles: progress and future prospects

The growing use of magnetic nanoparticles (MNPs) demands cost-effective methods for their synthesis that allow proper control of particle size and size distribution. The unique properties of MNPs include high specific surface area, ease of functionalization, chemical stability and superparamagnetic behavior, with applications in catalysis, data and energy storage, environmental remediation and biomedicine. This review highlights breakthroughs in the use of MNPs since their initial introduction in biomedicine to the latest challenging applications; special attention is paid to the importance of proper coating and functionalization of the particle surface, which dictates the specific properties for each application. Starting from the first report following LaMer’s theory in 1950, this review discusses and analyzes methods of synthesizing MNPs, with an emphasis on functionality and applications. However, several hurdles, such as the design of reactors with suitable geometries, appropriate control of operating conditions and, in particular, reproducibility and scalability, continue to prevent many applications from reaching the market. The most recent strategy, the use of microfluidics to achieve continuous and controlled synthesis of MNPs, is therefore thoroughly analyzed. This review is the first to survey continuous microfluidic coating or functionalization of particles, including challenging properties and applications.

Ultrasmall Fe@Fe3O4 nanoparticles as T1-T2 dual-mode MRI contrast agents for targeted tumor imaging

Targeted T₁-T₂ MRI contrast agents, which can eliminate the difficulty of image matching across multiple imaging instruments and permit specific localization of lesions, are promising candidates for more accurate diagnosis of tumors. In this study, ultrasmall Fe@Fe₃O₄ nanoparticles were designed and synthesized as T₁-T₂ dual-mode MRI contrast agents for accurate tumor imaging. First, to investigate the influence of nanoparticle size, Fe@Fe₃O₄ nanoparticles with diameters of 4, 8, and 12 nm were prepared, among which the 8 nm 3-(3,4-dihydroxyphenyl)propionic acid (DHCA)-modified nanoparticles exhibited the optimal T₁-T₂ dual-mode MRI performance. Next, to develop a tumor-targeted contrast agent, the DHCA-Fe@Fe₃O₄ nanoparticles were conjugated with the F56 peptide, which targets the vascular endothelial growth factor receptor, and the resulting F56-DHCA-Fe@Fe₃O₄ nanoparticles were found to exhibit good T₁-T₂ dual-mode imaging and tumor-targeting performance both in vitro and in vivo, indicating the nanoparticles represent a new research tool for accurate tumor diagnosis.

A magnetic relaxation switching and visual dual-mode sensor for selective detection of Hg2+ based on aptamers modified Au@Fe3O4 nanoparticles

The solvated mercuric ion (Hg²⁺) from industrial pollutants are highly toxic to the ecological environment and human health. Driven by urgent need for the selective and sensitive detection of Hg²⁺, a magnetic relaxation switching (MRS) based on Fe₃O₄ nanoparticles (NPs) was designed. Practically, the concentrations of Hg²⁺ in industrial pollutant is usually much higher than the detection range. Thus, gold nanoparticles (AuNPs) were synthesized on the surface of Fe₃O₄ NPs to enable the visual detection of Au@Fe₃O₄ NPs. The presence of Hg²⁺ in sample can specifically cause the aggregation of Au@Fe₃O₄-aptamers NPs through T-Hg²⁺-T base pairs, leading to the change in transverse relaxation time T₂ value of detection solution. The MRS sensor showed excellent response for Hg²⁺ ions in the range of 10 nM-100 nM and 100 nM to 5 μM. A highly sensitive and selective measurement of Hg²⁺ was obtained with a limit of detection of 2.7 nM. Noticeably, the visual detection can qualitatively analyze the Hg²⁺ beyond 5 μM by naked eye without advanced instrumentation and skilled operators.

Magnetic nanoparticles in nanomedicine: a review of recent advances

Nanomaterials, in addition to their small size, possess unique physicochemical properties that differ from bulk materials, making them ideal for a host of novel applications. Magnetic nanoparticles (MNPs) are one important class of nanomaterials that have been widely studied for their potential applications in nanomedicine. Due to the fact that MNPs can be detected and manipulated by remote magnetic fields, it opens a wide opportunity for them to be used in vivo. Nowadays, MNPs have been used for diverse applications including magnetic biosensing (diagnostics), magnetic imaging, magnetic separation, drug and gene delivery, and hyperthermia therapy, etc. Specifically, we reviewed some emerging techniques in magnetic diagnostics such as magnetoresistive (MR) and micro-Hall (μHall) biosensors, as well as the magnetic particle spectroscopy, magnetic relaxation switching and surface enhanced Raman spectroscopy (SERS)-based bioassays. Recent advances in applying MNPs as contrast agents in magnetic resonance imaging and as tracer materials in magnetic particle imaging are reviewed. In addition, the development of high magnetic moment MNPs with proper surface functionalization has progressed exponentially over the past decade. To this end, different MNP synthesis approaches and surface coating strategies are reviewed and the biocompatibility and toxicity of surface functionalized MNP nanocomposites are also discussed. Herein, we are aiming to provide a comprehensive assessment of the state-of-the-art biological and biomedical applications of MNPs. This review is not only to provide in-depth insights into the different synthesis, biofunctionalization, biosensing, imaging, and therapy methods but also to give an overview of limitations and possibilities of each technology.

Development of Potentiometric Phenol Sensors by Nata de Coco Membrane on Screen-Printed Carbon Electrode

Nata de coco, a bacterial cellulose as a result of coconut water fermentation, is a conductive polymer with a electrical conductivity of 553 μS/cm and has high mechanical stability. In this study, nata de coco was used as a supporting membrane for the development of phenol sensors in potentiometry. Nata de coco membrane containing phenol is coated on the surface of the printed carbon electrode (screen-printed carbon electrode). The cross-sectional area of the carbon electrode coated with the membrane is 1.5 × 3 mm², while the reference electrode is Ag/AgCl. The thickness of the electrode membrane affects the Nernstian factor. The optimum Nernstian factor is produced by 100 μm membrane thickness containing 117.5 μg of phenol. Measurement of phenol solution was carried out at pH 11, in the concentration range of 10^-8 to 10^-2 mol/L, resulting in a Nernstian factor of 41.8 ± 1.3 mV/decade. The Nernstian factor increased to 55.7 ± 0.4 mV/decade if the membrane of the electrode contained 0.1% Fe₃O₄ nanoparticles. This sensor has been applied in the real sample of river water, resulting in good accuracy and precision.

Recent Advances on Magnetic Relaxation Switching Assay-Based Nanosensors

Magnetic relaxation switching assay (MRSw)-based nanosensors respond to the changes of transverse relaxation time (T₂) of water molecules resulted from the analyte-induced aggregation and disaggregation of magnetic nanoparticles (MNPs). This strategy has been widely applied to the detections of various substrates from heavy metal ions to organic pollutants, proteins, nucleic acids, bacteria and viruses, and specific cells. Compared with other nanosensors, MRSw-based nanosensors not only are free from the background interferences, signal bleaching, and quenching but also overcome light scattering from samples without pretreatments. Therefore, MRSw-based nanosensors have been developed as real-time and on-site detection platforms for environmental protection, food safety, and risk assessment. This review summarizes the latest developments of the principles, the applicable magnetic nanoparticles, and the exploited environmental and biological applications of MRSw-based nanosensors.