Transition metal carbides in electrocatalytic oxygen evolution reaction

Heterostructure Fe7S8/Mn(OH)2 of incomplete sulfurization induces Mn atoms with high density of states for enhancing oxygen evolution reaction and supercapacitor electrochemical performance

Heterostructures and the introduction of heterogeneous elements have been regarded as effective strategies to promote electrochemical performance. Herein, sulfur species are introduced by a simple hydrothermal vulcanization method, which constructs the open heterostructure Fe7S8/Mn(OH)2 as a bifunctional material. The open cordyceps-like morphology can make the material contact more sufficiently with the electrolyte, exposing a large number of reaction sites. Furthermore, the introduction of the heterogeneous element S successfully constructs a heterogeneous interface, the interface-modulated composite material consists of Mn atoms contributing the main density of states (DOS) near the Fermi energy level from the density functional theory (DFT) calculations, which optimizes the adsorption energy of oxygen-containing intermediates during the oxygen evolution reaction (OER) process and reduces the reaction energy barrier, being conducive to the improvement of the material's electrochemical properties. As predicted, the Fe7S8/Mn(OH)2 material exhibits remarkable electrochemical properties, such as an overpotential of 202 mV at 10 mA cm-2 for the oxygen evolution reaction and even a specific capacitance of 2198 F g-1 at 1 A g-1. This work provides new insights into the role of introducing sulfur species and controlling the structure of the material, and exemplifies novel design ideas for developing bifunctional materials for energy storage and conversion.

Oxygen-bridged Schottky junction in ZnO-Ni3ZnC0.7 promotes photocatalytic reduction of CO2 to CO: Steering charge flow and modulating electron density of active sites

Developing carbon dioxide (CO2) photocatalysts from transition metal carbides (TMCs) with abundant active sites, modulable electron cloud density, as well as low cost and high stability is of great significance for artificial photosynthesis. Building an efficient electron transfer channel between the photo-excitation site and the reaction-active site to extract and steer photo-induced electron flow is necessary but challenging for the highly selective conversion of CO2. In this study, we achieved an oxygen-bridged Schottky junction between ZnO and Ni3ZnC0.7 (denoted as Znoxide-O-ZnTMC) through a ligand-vacancy strategy of MOF. The ZnO-Ni3ZnC0.7 heterostructure integrates the photo-exciter (ZnO), high-speed electron transport channel (Znoxide-O-ZnTMC), and reaction-active species (Ni3ZnC0.7), where Znoxide-O-ZnTMC facilitates the transfer of excited electrons in ZnO to Ni3ZnC0.7. The Zn atoms in Ni3ZnC0.7 serve as electron-rich active sites, regulating the CO2 adsorption energy, promoting the transformation of *COOH to CO, and inhibiting H2 production. The ZnO-Ni3ZnC0.7 shows a high CO yield of 2674.80 μmol g-1h-1 with a selectivity of 93.40 % and an apparent quantum yield of 18.30 % (λ = 420 nm) with triethanolamine as a sacrificial agent. The CO production rate remains at 96.40 % after 18 h. Notably, ZnO-Ni3ZnC0.7 exhibits a high CO yield of 873.60 μmol g-1h-1 with a selectivity of 90.20 % in seawater.

Incorporation of Ag in Co9S8-Ni3S2 for Predominantly Enhanced Electrocatalytic Activities for Oxygen Evolution Reaction: A Combined Experimental and DFT Study

Electrodeposition of abundant metals to fabricate efficient and durable electrodes indicate a viable role in advancing renewable electrochemical energy tools. Herein, we deposit Co9S8-Ag-Ni3S2@NF on nickel foam (NF) to produce Co9S8-Ag-Ni3S2@NF as a exceedingly proficient electrode for oxygen evolution reaction (OER). The electrochemical investigation verifies that the Co9S8-Ag-Ni3S2@NF electrode reveals better electrocatalytic activity to OER because of its nanoflowers' open-pore morphology, reduced overpotential (η10=125 mV), smaller charge transfer resistance, long-term stability, and a synergistic effect between various components, which allows the reactants to be more easily absorbed and subsequently converted into gaseous products during the water electrolysis route. Density functional theory (DFT) calculation as well reveals the introduction of Ag (222) surface into the Co9S8 (440)-Ni3S2 (120) structure increases the electronic density of states (DOS) per unit cell of a system and increases the electrocatalytic activity of OER by considerably lowering the energy barriers of its intermediates. This study provides the innovation of employing trimetallic nanomaterials immobilized on a conductive, continuous porous three-dimensional network formed on a nickel foam (NF) substrate as a highly proficient catalyst for OER.

Tungsten doped FeCoP2 nanoparticles embedded into carbon for highly efficient oxygen evolution reaction

Designing active and stable electrocatalysts with economic efficiency for oxygen evolution reaction (OER) is essential for developing water splitting process at an industrial scale. Herein, we rationally designed a tungsten doped iron cobalt phosphide incorporated with carbon (Wx-FeCoP2/C), prepared by a mechanochemical approach. X-ray photoelectron spectroscopy (XPS) revealed that the doping of W led to an increasing of Co3+/Co2+ and Fe3+/Fe2+ molar ratios, which contributed to the enhanced OER performance. As a result, a current density of 10 mA cm-2 was achieved in 1 M KOH at an overpotential of 264 mV on the optimized W0.1-FeCoP2/C. Moreover, at high current density of 100 mA cm-2, the overpotential value was 310 mV, and the corresponding Tafel slope was measured to be 48.5 mV dec-1, placing it among the best phosphide-based catalysts for OER. This work is expected to enlighten the design strategy of highly efficient phosphide-based OER catalysts.

Transition metal-based electrocatalysts for alkaline overall water splitting: advancements, challenges, and perspectives

Water electrolysis is a promising method for efficiently producing hydrogen and oxygen, crucial for renewable energy conversion and fuel cell technologies. The hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are two key electrocatalytic reactions occurring during water splitting, necessitating the development of active, stable, and low-cost electrocatalysts. Transition metal (TM)-based electrocatalysts, spanning noble metals and TM oxides, phosphides, nitrides, carbides, borides, chalcogenides, and dichalcogenides, have garnered significant attention due to their outstanding characteristics, including high electronic conductivity, tunable valence electron configuration, high stability, and cost-effectiveness. This timely review discusses developments in TM-based electrocatalysts for the HER and OER in alkaline media in the last 10 years, revealing that the exposure of more accessible surface-active sites, specific electronic effects, and string effects are essential for the development of efficient electrocatalysts towards electrochemical water splitting application. This comprehensive review serves as a guide for designing and constructing state-of-the-art, high-performance bifunctional electrocatalysts based on TMs, particularly for applications in water splitting.

Hierarchically porous aggregates of Co-N-C nanoparticles for oxygen electrocatalysis

Herein, a novel assembled Co-N-C (A-Co-N-C) material was reported for the first time by pyrolyzing zeolitic imidazolate framework-67 (ZIF-67) nanoparticle aggregates caused by the introduction of surfactant polystyrene sulfonic acid (PSS). The A-Co-N-C has a large surface area of 455 m2 g-1 with micropores (101 m2 g-1) and mesopores (354 m2 g-1). The A-Co-N-C exhibits good bifunctional catalytic oxygen reduction/evolution reaction (ORR/OER) and Zn-air battery activity. This work provides a simple but efficient strategy for constructing hierarchically porous aggregates of Co-N-C nanoparticles.

Recent Progress on Nickel- and Iron-Based Metallic Organic Frameworks for Oxygen Evolution Reaction: A Review

Developing sustainable energy solutions to safeguard the environment is a critical ongoing demand. Electrochemical water splitting (EWS) is a green approach to create effective and long-lasting electrocatalysts for the water oxidation process. Metal organic frameworks (MOFs) have become commonly utilized materials in recent years because of their distinguishing pore architectures, metal nodes easy accessibility, large specific surface areas, shape, and adaptable function. This review outlines the most significant developments in current work on developing improved MOFs for enhancing EWS. The benefits and drawbacks of MOFs are first discussed in this review. Then, some cutting-edge methods for successfully modifying MOFs are also highlighted. Recent progress on nickel (Ni) and iron (Fe) based MOFs have been critically discussed. Finally, a comprehensive analysis of the existing challenges and prospects for Ni- and Fe-based MOFs are summarized.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Carbon Quantum Dots-Doped Ni3Se4/Co9Se8/Fe3O4 Multilayer Nanosheets Prepared Using the One-Step Solvothermal Method to Boost Electrocatalytic Oxygen Evolution

Oxygen evolution reaction is a momentous part of electrochemical energy storage and conversion devices such as rechargeable metal-air batteries. It is particularly urgent to develop low-cost and efficient electrocatalysts for oxygen evolution reactions. As a potential substitute for noble metal electrocatalysts, transition metal selenides still prove challenging in improving the activity of oxygen evolution reaction and research into reaction intermediates. In this study, a simple one-step solvothermal method was used to prepare a polymetallic compound carbon matrix composite (Co₉Se₈/Ni₃Se₄/Fe₃O₄@C) with a multilayered nanosheets structure. It exhibited good OER activity in an alkaline electrolyte solution, with an overpotential of 268 mV at 10 mA/cm². In addition, this catalyst also showed excellent performance in the 24 h stability test. The composite presents a multi-layer sheet structure, which effectively improves the contact between the active site and the electrolyte. The selenide formed by Ni and Co has a synergistic effect, and Fe₃O₄ and Co₉Se₈ form a heterojunction structure which can effectively improve the reaction activity by initiating the electronic coupling effect through the interface modification. In addition, carbon quantum dots have rich heteroatoms and electron transferability, which improves the electrochemical properties of the composites. This work provides a new strategy for the preparation of highly efficient OER electrocatalysts utilizing the multi-metal synergistic effect.

Cr3C2 nanoparticles decorated carbon nanofibers for efficient nitrate reduction to ammonia at ambient conditions

Electrochemical nitrate (NO₃^-) reduction is a promising approach to relieve nitrate pollution and produce value-added ammonia (NH₃), but efficient and durable catalysts are required due to the large bond dissociation energy of nitrate and low selectivity. Herein, we propose chromium carbide (Cr₃C₂) nanoparticles loaded carbon nanofibers (Cr₃C₂@CNFs) as electrocatalysts to convert nitrate to ammonia. In phosphate buffer saline containing 0.1 mol L^-1 NaNO₃, such catalyst achieves a large NH₃ yield of 25.64 mg h^-1 mg^-1_cat. and a high faradaic efficiency of 90.08% at -1.1 V vs the reversible hydrogen electrode, which also shows excellent electrochemical durability and structural stability. Theoretical calculations reveal the adsorption energy for nitrate at Cr₃C₂ surfaces reaches -1.92 eV and the potential determining step (*NO→*N) for Cr₃C₂ hits a low energy increase of 0.38 eV.

Selenium-transition metal supported on a mixture of reduced graphene oxide and silica template for water splitting

Exploration of economical, highly efficient, and environment friendly non-noble-metal-based electrocatalysts is necessary for hydrogen and oxygen evolution reactions (HER and OER) but challenging for cost-effective water splitting. Herein, metal selenium nanoparticles (M = Ni, Co & Fe) are anchored on the surface of reduced graphene oxide and a silica template (rGO-ST) through a simple one-pot solvothermal method. The resulting electrocatalyst composite can enhance mass/charge transfer and promote interaction between water molecules and electrocatalyst reactive sites. NiSe2/rGO-ST shows a remarkable overpotential (52.5 mV) at 10 mA cm-2 for the HER compared to the benchmark Pt/C E-TEK (29 mV), while the overpotential values of CoSeO3/rGO-ST and FeSe2/rGO-ST are 246 and 347 mV, respectively. The FeSe2/rGO-ST/NF shows a low overpotential (297 mV) at 50 mA cm-2 for the OER compared to RuO2/NF (325 mV), while the overpotentials of CoSeO3-rGO-ST/NF and NiSe2-rGO-ST/NF are 400 and 475 mV, respectively. Furthermore, all catalysts indicate negligible deterioration, indicating better stability during the process of HER and OER after a stability test of 60 h. The water splitting system composed of NiSe2-rGO-ST/NF||FeSe2-rGO-ST/NF electrodes requires only ∼1.75 V at 10 mA cm-2. Its performance is nearly close to that of a noble metal-based Pt/C/NF||RuO2/NF water splitting system.

Nano bowl-like cobalt-cobalt molybdenum carbide coated by N,P co-doped carbon as an advanced bifunctional oxygen electrocatalyst for rechargeable Zn-air batteries

Nano bowl-like Co-Co₆Mo₆C₂ coated by N,P co-doped carbon (Co-Co₆Mo₆C₂@NPC) is reported as an electrocatalyst for Zn-air batteries. Co-Co₆Mo₆C₂@NPC only needs an overpotential of 210 mV at 10 mA cm^-2 for the OER, and the half-wave potential for the ORR is 0.81 V. In addition, the Co-Co₆Mo₆C₂@NPC based battery shows a large open-circuit voltage of 1.335 V and a maximum power density of 160.5 mW cm^-2, as well as good stability. The improved catalytic performance can be ascribed to the co-existence of Co₆Mo₆C₂ and Co species to improve the intrinsic catalytic activity, and the bowl-like nanostructure to facilitate the mass transfer.

Computational screening toward transition metal doped vanadium carbides in different crystal planes for efficient hydrogen evolution: a first-principles study

In the present work, we evaluated the hydrogen evolution reaction (HER) performance of transition metal (Co, Fe, Ni, Mn, and Mo) doped vanadium carbides (VC). In addition, the doping atoms were screened separately on the (100), (110) and (111) crystal planes to analyze the differences in HER activities. Among all the calculated models, Mn-VC(100) exhibited the best catalytic hydrogen evolution performance with a Gibbs free energy for hydrogen adsorption (ΔG_H*) of 0.0012 eV. Doping Mn greatly improved the HER performance of VC(100) by enhancing the adsorption of hydrogen on the catalyst surface. The analysis of the electronic density of states and charge transfer confirmed that doping transition metal atoms into the surfaces of the VC model successfully optimized the electronic structure and promoted catalytic reaction kinetics. Besides, the relationship between the catalytic activity and pH value of different models was considered, and doping Co atoms on the (100) crystal plane could effectively modify the pH value range applicable for the efficient HER. Interestingly, even if the same metal atoms were doped, various active sites of VC models exhibited different catalytic performances due to disparate exposed crystal planes and pH values. This indicates that the main exposed crystal surfaces and the pH range of application need to be considered when selecting the appropriate doping element for the catalyst.

A comprehensive review on the electrochemical parameters and recent material development of electrochemical water splitting electrocatalysts

Electrochemical splitting of water is an appealing solution for energy storage and conversion to overcome the reliance on depleting fossil fuel reserves and prevent severe deterioration of the global climate. Though there are several fuel cells, hydrogen (H2) and oxygen (O2) fuel cells have zero carbon emissions, and water is the only by-product. Countless researchers worldwide are working on the fundamentals, i.e. the parameters affecting the electrocatalysis of water splitting and electrocatalysts that could improve the performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) and overall simplify the water electrolysis process. Noble metals like platinum for HER and ruthenium and iridium for OER were used earlier; however, being expensive, there are more feasible options than employing these metals for all commercialization. The review discusses the recent developments in metal and metalloid HER and OER electrocatalysts from the s, p and d block elements. The evaluation perspectives for electrocatalysts of electrochemical water splitting are also highlighted.

Recent advances in epitaxial heterostructures for electrochemical applications

Construction of epitaxial heterostructures is crucial for boosting the electrochemical properties of various materials, however a review dedicated to this attractive topic is still lacking. In this Minireview, a timely summary on the achievements of epitaxial heterostructure design for electrochemical applications is provided. We first introduce the synthesis strategies to provide fundamental understanding on how to create epitaxial interfaces between different components. Secondly, the superiorities of epitaxial heterostructures in electrocatalysis, supercapacitors and batteries are highlighted with the underlying structure-property relationship elucidated. Finally, a discussion on the challenges and future prospects of this field is presented.

Cobalt-based co-ordination complex-derived nanostructure for efficient oxygen evolution reaction in acidic and alkaline medium

Electrochemical water splitting is one of the most important method for energy conversion and storage. For this, the design and development of a low-cost robust electrocatalyst are highly desirable. In this study, Cobalt-based electrocatalyst for Oxygen Evolution Reaction was synthesized by thermal treatment of Cobalt-dehydroacetic acid (Co-DHA). The as-synthesized Co nanostructures and Co-DHA crystals were characterized with powder X-ray diffraction, X-ray photoelectron spectroscopy thermo-gravimetric analysis, and field emission scanning electron microscopy. The electrochemical O₂ evolution study shows the overpotential (at 10 mV/cm⁻²) correspond to 294 mV vs reference hydrogen electrode (RHE) for K-300 (Co₃O₄@300), whereas K-500 (Co₃O₄@500) shows 170 mV vs RHE values in 1 M KOH solution, respectively. Similar trends have been observed for electrochemical O₂ evolution studies in 0.5 M H₂SO₄, where K-300 and K-500 shows the overpotential (at 10mV/cm⁻²) of 234 mV vs RHE, and 199 mV vs RHE, respectively. The outcomes show better catalytic efficiency of K-500 as compared to K-300.

•

Simple one pot synthesis for precursor of Co₃O₄.

•

Enhanced activity for oxygen evolution reaction.

•

Efficient performance and stability in both acidic and alkaline medium.

Sol-Gel Synthesized High Entropy Metal Oxides as High-Performance Catalysts for Electrochemical Water Oxidation

Hexanary high-entropy oxides (HEOs) were synthesized through the mechanochemical sol-gel method for electrocatalytic water oxidation reaction (WOR). As-synthesized catalysts were subjected to characterization, including X-ray diffraction (XRD), Fourier transforms infrared (FTIR) analysis, and scanning electron microscopy (SEM). All the oxide systems exhibited sharp diffraction peaks in XRD patterns indicating the defined crystal structure. Strong absorption between 400–700 cm−1 in FTIR indicated the formation of metal-oxide bonds in all HEO systems. WOR was investigated via cyclic voltammetry using HEOs as electrode platforms, 1M KOH as the basic medium, and 1M methanol (CH3OH) as the facilitator. Voltammetric profiles for both equiatomic (EHEOs) and non-equiatomic (NEHEOs) were investigated, and NEHEOs exhibited the maximum current output for WOR. Moreover, methanol addition improved the current profiles, thus leading to the electrode utility in direct methanol fuel cells as a sequential increase in methanol concentration from 1M to 2M enhanced the OER current density from 61.4 to 94.3 mA cm−2 using NEHEO. The NEHEOs comprising a greater percentage of Al, ([Al0.35(Mg, Fe, Cu, Ni, Co)0.65]3O4) displayed high WOR catalytic performance with the maximum diffusion coefficient, D° (10.90 cm2 s−1) and heterogeneous rate constant, k° (7.98 cm s−1) values. These primary findings from the EC processes for WOR provide the foundation for their applications in high-energy devices. Conclusively, HEOs are proven as novel and efficient catalytic platforms for electrochemical water oxidation.

Djurleite Copper Sulfide-Coupled Cobalt Sulfide Interface for a Stable and Efficient Electrocatalyst

Transition metal sulfides (TMS) exhibit proliferated edge sites, facile electrode kinetics, and improved intrinsic electrical conductivity, which demand low potential requirements for total water splitting application. Here, we have propounded copper sulfide-coupled cobalt sulfide nanosheets grown on 3D nickel as an electrocatalyst for hydrogen (HER) and oxygen evolution (OER) reactions. The formation of djurleite copper sulfide with a Cu vacancy enables faster H⁺ ion transport and shows improved HER activity with a remarkably lower overpotential of 164 mV at 10 mA/cm², whereas cobalt-incorporated copper sulfide undergoes cation exchange during synthesis and shows elevated OER activity with a lower overpotential of 240 mV at 10 mA/cm² for the OER. Moreover, Cu_2-xS/Co is said to have a hybrid CoS-CoS₂ interface and provide Co²⁺ active sites on the surface and enable the fast adsorption of intermediate species (OH*, O*, and OOH*), which lowers the potential requirement. The copper vacancy and cation exchange with a hybrid CoS-CoS₂ structure are helpful in supplying more surface reactive species and faster ion transport for the HER and OER, respectively. The full-cell electrolyzer requires a very low potential of 1.58 V to attain a current density of 10 mA/cm², and it shows excellent stability for 50 h at 100 mA/cm² as confirmed by the chronopotentiometry test.

Corrosion-Engineered Morphology and Crystal Structure Regulation toward Fe-Based Efficient Oxygen Evolution Electrodes

The rational regulation of catalysts with a well-controlled morphology and crystal structure has been demonstrated effective for optimizing the electrochemical performance. Herein, corrosion engineering was employed for the straightforward preparation of FeAl layered double hydroxide (LDH) nanosheets and Fe₃O₄ nanooctahedrons via the feasible modification of dealloying conditions. The FeAl-LDH nanosheets display an excellent catalytic performance for oxygen evolution reactions in 1 M KOH solution, such as low overpotentials (333 mV on glass carbon electrode and 284 mV on Ni foam at 10 mA cm⁻²), a small Tafel slope (36 mV dec⁻¹), and excellent durability (24 h endurance without deactivation). The distinguished catalytic features of the FeAl-LDH nanosheets comes from the Al and Fe synergies, oxygen vacancies, and well-defined two-dimensional (2D) layered LDH structure.

Efficient oxygen evolution reaction on RuO2nanoparticles decorated onion-like carbon (OLC)

Oxygen evolution reaction (OER) is an important half-cell reaction of the electrical water splitting, for its high overpotential associated with sluggish OER kinetics. Therefore, it is critical to develop highly active and durable electrocatalysts to reduce the overpotential. Herein, ultra-small RuO₂nanoparticles (NPs) supported on onion-like carbon (OLC) and carbon nanotube (CNT) are successfully synthesized by means of wet impregnation combined with annealing treatment, respectively. The microstructure characterization results showed OLC perfect graphitic carbon layer structure, and the RuO₂NPs supported on the OLC possess larger particle size compared with the RuO₂NPs supported on the CNT. Moreover, the electronic structure of Ru in RuO₂/OLC was also optimized by the OLC support to be beneficial for the OER. The OER performance of the catalysts were investigated in 1 M KOH solution. The results show RuO₂/OLC has a comparable OER activity to the commercial RuO₂, but a significantly higher mass activity than the commercial RuO₂. When compared with the RuO₂/CNT, RuO₂/OLC not only exhibits lower overpotential and Tafel slop, but also owns more active sites and higher TOF value, indicating the OLC support improved the OER activity of RuO₂/OLC. Moreover, RuO₂/OLC showed a superior stability compared with RuO₂/CNT, which can be attributed to the excellent electrochemical oxidation-resistance of the OLC.

A Fe-doped Co-oxide Electrocatalyst Synthesized Through Post-Modification Method Toward Advanced Water Oxidation

In the context of the ever-increasing energy crisis, electrocatalytic water splitting has attracted widespread attention as an effective means to provide clean energy. However, the oxygen evolution reaction (OER), which...

Mesoporous Mn-Fe oxyhydroxides for oxygen evolution

Development of high-performance and earth-abundant catalysts is imperative for the oxygen evolution reaction (OER), and mesoporous oxyhydroxides show huge potential as advanced catalysts toward OER due to large specific surface...

Constructing RuCoOx /NC Nanosheets with Low Crystallinity within ZIF-9 as Bifunctional Catalysts for Highly Efficient Overall Water Splitting

Electrocatalysts play a pivotal role in accelerating the sluggish electrochemical water splitting reaction. Herein, a Ru-Co oxides and carbon nitrides hybrid (RuCoO_x /NC) electrocatalyst was constructed by employing ZIF-9 to disperse Ru precursor and deliberately regulating the calcination temperature. The moderate calcination temperature results in the RuCoO_x nanocomposites with small particle size and low crystallinity as well as the co-existence of multi-valence metal compounds, thus boosting the amount and species of active sites. Moreover, the strong interactions between Co and Ru species induce the electron transfer from Co to Ru, thus enhancing the adsorption of anion intermediates on the electron-deficient Co species and the proton capturing capacity of electron-sufficient Ru species. As a result, the optimized RuCoO_x /NC-350 catalyst behaved good electrocatalytic activities with 73 and 210 mV overpotential to achieve 10 mA cm^-2 for HER and OER, respectively. Remarkably, it showed good durability by holding at 100 mA cm^-2 for 100 h in HER and 50 mA cm^-2 for 24 h in OER with small activity decline. This study may shed new light on the rational construction of highly efficient Ru-based catalysts for electrochemical water splitting.

MOF-Derived Fe-Doped Ni@NC Hierarchical Hollow Microspheres as an Efficient Electrocatalyst for Alkaline Oxygen Evolution Reaction

The development of low-cost and efficient electrocatalysts for oxygen evolution reaction (OER) is of great importance for producing hydrogen via water splitting. Metal-organic frameworks (MOFs) provide an opportunity for the facile preparation of high-efficiency OER electrocatalysts. In this work, we prepared iron-doped nickel nanoparticles encapsulated in nitrogen-doped carbon microspheres (Fe-Ni@NC) with a unique hierarchical porous structure by directly pyrolyzing the MOF precursor for effectively boosting OER. The Fe doping has a significant enhancement effect on the catalytic performance. The optimized Fe (5%)-Ni@NC catalyst represents a remarkable activity with an overpotential of 257 mV at 10 mA cm-2 and superior stability toward OER in 1.0 M KOH.

Recent Advances in Transition Metal Carbide Electrocatalysts for Oxygen Evolution Reaction

The electrolysis of water is considered to be a primary method for the mass production of hydrogen on a large scale, as a substitute for unsustainable fossil fuels in the future. However, it is highly restricted by the sluggish kinetics of the four-electron process of the oxygen evolution reaction (OER). Therefore, there is quite an urgent need to develop efficient, abundant, and economical electrocatalysts. Transition metal carbides (TMCs) have recently been recognized as promising electrocatalysts for OER due to their excellent activity, conductivity, and stability. In this review, widely-accepted evaluation parameters and measurement criteria for different electrocatalysts are discussed. Moreover, five sorts of TMC electrocatalysts—including NiC, tungsten carbide (WC), Fe3C, MoC, and MXene—as well as their hybrids, are researched in terms of their morphology and compounds. Additionally, the synthetic methods are summarized. Based on the existing materials, strategies for improving the catalytic ability and new designs of electrocatalysts are put forward. Finally, the future development of TMC materials is discussed both experimentally and theoretically, and feasible modification approaches and prospects of a reliable mechanism are referred to, which would be instructive for designing other effective noble-free electrocatalysts for OER.