1
|
Arab N, Derakhshani R, Sayadi MH. Approaches for the Efficient Removal of Fluoride from Groundwater: A Comprehensive Review. TOXICS 2024; 12:306. [PMID: 38787085 PMCID: PMC11126082 DOI: 10.3390/toxics12050306] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/10/2024] [Revised: 03/28/2024] [Accepted: 04/01/2024] [Indexed: 05/25/2024]
Abstract
Contamination of groundwater with fluoride represents a significant global issue, with high concentrations posing serious public health threats. While fluoride is a critical element in water, excessive levels can be detrimental to human health and potentially life-threatening. Addressing the challenge of removing fluoride from underground water sources via nanotechnological approaches is a pressing concern in environmental science. To collate relevant information, extensive literature searches were conducted across multiple databases, including Google Scholar, PubMed, Scopus, Web of Science, the American Chemical Society, Elsevier, Springer, and the Royal Society of Chemistry. VOS Viewer software version 1.6.20 was employed for a systematic review. This article delivers an exhaustive evaluation of various groundwater fluoride removal techniques, such as adsorption, membrane filtration, electrocoagulation, photocatalysis, and ion exchange. Among these, the application of nanoparticles emerges as a notable method. The article delves into nano-compounds, optimizing conditions for the fluoride removal process and benchmarking their efficacy against other techniques. Studies demonstrate that advanced nanotechnologies-owing to their rapid reaction times and potent oxidation capabilities-can remove fluoride effectively. The implementation of nanotechnologies in fluoride removal not only enhances water quality but also contributes to the safeguarding of human health.
Collapse
Affiliation(s)
- Negar Arab
- Department of Environmental Engineering, Faculty of Natural Resources and Environment, University of Birjand, Birjand 9717434765, Iran;
| | - Reza Derakhshani
- Department of Geology, Shahid Bahonar University of Kerman, Kerman 7616913439, Iran
- Department of Earth Sciences, Utrecht University, 3584 CB Utrecht, The Netherlands
| | - Mohammad Hossein Sayadi
- Faculty of Natural Resources and Environment, Shahid Bahonar University of Kerman, Kerman 7616913439, Iran;
| |
Collapse
|
2
|
Sinharoy A, Lee GY, Chung CM. Optimization of Calcium Fluoride Crystallization Process for Treatment of High-Concentration Fluoride-Containing Semiconductor Industry Wastewater. Int J Mol Sci 2024; 25:3960. [PMID: 38612770 PMCID: PMC11011877 DOI: 10.3390/ijms25073960] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/19/2024] [Revised: 03/30/2024] [Accepted: 04/01/2024] [Indexed: 04/14/2024] Open
Abstract
This study utilized a fluidized bed reactor (FBR) for fluoride removal from high-concentration fluoride-ion-containing simulated semiconductor industry wastewater and recovered high-purity CaF2 crystals. The effects of hydraulic retention time (HRT), pH, Ca2+ to F- ratio, upflow velocity, seed size and seed bed height were investigated by performing lab-scale batch experiments. Considering fluoride removal and CaF2 crystallization efficiency, 5 h HRT, pH 6, seed height of 50 cm and [Ca2+]/[F-] ratio of 0.55 (mol/mol) were found to be optimum. The effect of the interaction between the important process parameters on fluoride removal was further analyzed using response surface methodology (RSM) experimental design. The results showed that all the individual parameters have a significant impact (p = 0.0001) on fluoride removal. SEM-EDX and FTIR analysis showed the composition of the crystals formed inside FBR. HR-XRD analysis confirmed that the crystalline structure of samples was mainly CaF2. The results clearly demonstrated the feasibility of silica seed material containing FBR for efficient removal and recovery of fluoride as high-purity calcium fluoride crystals.
Collapse
Affiliation(s)
| | | | - Chong-Min Chung
- Department of Environmental Science & Biotechnology, Jeonju University, Jeonju 55069, Republic of Korea; (A.S.); (G.-Y.L.)
| |
Collapse
|
3
|
Li R, Ren L, Chen L, Liu H, Qiang T. New materials-based on gelatin coordinated with zirconium or aluminum for ecological retanning. Int J Biol Macromol 2024; 261:129922. [PMID: 38309403 DOI: 10.1016/j.ijbiomac.2024.129922] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2023] [Revised: 01/24/2024] [Accepted: 01/31/2024] [Indexed: 02/05/2024]
Abstract
Ecological retanning agent is an effective way to solve the pollution source of leather manufacturing industry. In this study, the gelatin from chrome-containing leather shavings in the leather industry was used to realize sustainable leather post-tanning. The gelatin hydrolysate (GH) coordinated with Zr4+ or Al3+ to prepare eco-friendly retanning agents GH-Zr and GH-Al. The successful coordination between GH and metal ions was characterized by FTIR and XPS. The retanning agents were characterized by FTIR curve-fitting and circular dichroism spectroscopy. The results showed that the conformation of the secondary structure of the polypeptide became ordered and stable after coordinating with the metal ions. The particle size and weight average molecular weight of the retanning agents were ~1700 nm and ~2100, respectively, measured by nanoparticle size analyzer and gel permeation chromatography (GPC). The retanning agents were applied to retanning of chrome tanned leather and glutaraldehyde tanned leather. The abundant free amino from retanning agents can consume the free formaldehyde. Meanwhile, retanning agents can effectively improve the multiple binding sites, resulting in favorable thickening rate (>110 %) and excellent dye and fatliquor absorption rate with ~99.91 % and ~93.18 %. Thus, this strategy can provide a viable choice for solid leather waste and sustainable development of the leather industry.
Collapse
Affiliation(s)
- Ruilong Li
- National Demonstration Center for Experimental Light Chemistry Engineering Education, College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China
| | - Longfang Ren
- National Demonstration Center for Experimental Light Chemistry Engineering Education, College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China.
| | - Liang Chen
- State Key Laboratory of Environment-friendly Energy Materials, Engineering Research Center of Biomass Materials (Ministry of Education), School of Materials and Chemistry, Southwest University of Science and Technology, Mianyang 621010, China
| | - Huaqing Liu
- National Demonstration Center for Experimental Light Chemistry Engineering Education, College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China
| | - Taotao Qiang
- National Demonstration Center for Experimental Light Chemistry Engineering Education, College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China.
| |
Collapse
|
4
|
Chen C, Xu W, Li G, Qu H, Ma C, Zhang H, Bahojb Noruzi E, Cai M, Wang M, Hou X, Li H. Selectively transport and removal of fluoride ion by pillar[5]arene polymer-filled nanochannel membrane. Chemistry 2024:e202303742. [PMID: 38214487 DOI: 10.1002/chem.202303742] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/25/2023] [Revised: 01/05/2024] [Accepted: 01/11/2024] [Indexed: 01/13/2024]
Abstract
Excess fluoride ions in groundwater accumulate through the roots of crops, affecting photosynthesis and inhibiting their growth. Long-term bioaccumulation also threatens human health because it is poorly degradable and toxic. Currently, one of the biggest challenges is developing a unique material that can efficiently remove fluoride ions from the environment. The excellent properties of functionalized pillar[5]arene polymer-filled nanochannel membranes were explored to address this challenge. Constructing a multistage porous nanochannel membrane, consisting of microscale etched nanochannels and nanoscale pillar[5]arene cross-linked polymer voids. A fluoride removal rate of 0.0088 mmol ⋅ L-1 ⋅ min-1 was achieved. Notably, this rate surpassed the rates observed with other control ions by a factor of 6 to 8.8. Our research provides a new direction for developing water fluoride ion removal materials.
Collapse
Affiliation(s)
- Chunxiu Chen
- National Key Laboratory of Green Pesticide, College of Chemistry, Central China Normal University, Wuhan, 430079, P.R. China
| | - Weiwei Xu
- National Key Laboratory of Green Pesticide, College of Chemistry, Central China Normal University, Wuhan, 430079, P.R. China
| | - Guang Li
- National Key Laboratory of Green Pesticide, College of Chemistry, Central China Normal University, Wuhan, 430079, P.R. China
| | - Haonan Qu
- National Key Laboratory of Green Pesticide, College of Chemistry, Central China Normal University, Wuhan, 430079, P.R. China
| | - Cuiguang Ma
- National Key Laboratory of Green Pesticide, College of Chemistry, Central China Normal University, Wuhan, 430079, P.R. China
| | - Haifan Zhang
- National Key Laboratory of Green Pesticide, College of Chemistry, Central China Normal University, Wuhan, 430079, P.R. China
| | - Ehsan Bahojb Noruzi
- National Key Laboratory of Green Pesticide, College of Chemistry, Central China Normal University, Wuhan, 430079, P.R. China
| | - Meng Cai
- National Key Laboratory of Green Pesticide, College of Chemistry, Central China Normal University, Wuhan, 430079, P.R. China
| | - Miao Wang
- College of Materials, Xiamen University, Xiamen, 361005, China
| | - Xu Hou
- State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, 361005, China
| | - Haibing Li
- National Key Laboratory of Green Pesticide, College of Chemistry, Central China Normal University, Wuhan, 430079, P.R. China
- State Key Laboratory of Featured MetaMaterials and Life-cycle Safety for Composite Structures, Guangxi University, Nanning, 530004, P. R. China
| |
Collapse
|
5
|
Jiang W, Xiang W, Lu W, Yuan D, Gao Z, Hu B, Li Y, Wu Y, Feng Z. Emulsifying performance of the hexadecyltrimethylammonium bromide (CTAB) complexed alginate microgels: Effects from their deformability on oil-water interface. Int J Biol Macromol 2023; 253:127509. [PMID: 37865370 DOI: 10.1016/j.ijbiomac.2023.127509] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/28/2023] [Revised: 09/25/2023] [Accepted: 10/11/2023] [Indexed: 10/23/2023]
Abstract
Hexadecyltrimethylammonium bromide complexed alginate-Ca2+ microgels (C/AMGs) were developed as emulsifiers, which shown remarkably improved emulsifying performance than non-complexed alginate-Ca2+ microgels (AMGs) in previous study. This work focus on the impact of deformability on the emulsifying performance of C/AMGs. By regulating alginate concentration (1.0-4.0 wt%), microgels with different deformability were prepared. Deformability was proved to have great influence on the emulsifying performance of C/AMGs, which was evaluated by Langmuir trough measurements, emulsion appearance, centrifugation stability, digestive behavior, and oxidative stability. Particle size and SEM images indicated microgels prepared with lower alginate concentration are more deformable. C/AMGs (2.0 wt%) exhibits the best emulsifying performance, which could be ascribed to the appreciated deformability and mechanical strength. Digestive behavior and oxidative stability of alginate-Ca2+ microgel (2.0 wt%) stabilized emulsions were further investigated. Compared with alginate-Ca2+ microgel (2.0 wt%) stabilized emulsions, C/AMGs (2.0 wt%) stabilized emulsions shown delayed lipid digestion and lower POV. Results of this work supporting that Mickering mechanism have potential in fabricating functional emulsions based on natural polysaccharides.
Collapse
Affiliation(s)
- Wenxin Jiang
- Cooperative Innovation Center of Industrial Fermentation (Ministry of Education & Hubei Province), Hubei University of Technology, Nanli Road, Wuhan 430068, PR China; Glyn O. Phillips Hydrocolloid Research Centre, School of Food and Biological Engineering, Hubei University of Technology, Nanli Road, Wuhan 430068, PR China
| | - Wei Xiang
- Cooperative Innovation Center of Industrial Fermentation (Ministry of Education & Hubei Province), Hubei University of Technology, Nanli Road, Wuhan 430068, PR China; Glyn O. Phillips Hydrocolloid Research Centre, School of Food and Biological Engineering, Hubei University of Technology, Nanli Road, Wuhan 430068, PR China
| | - Wei Lu
- Glyn O. Phillips Hydrocolloid Research Centre, School of Food and Biological Engineering, Hubei University of Technology, Nanli Road, Wuhan 430068, PR China
| | - Dan Yuan
- Cooperative Innovation Center of Industrial Fermentation (Ministry of Education & Hubei Province), Hubei University of Technology, Nanli Road, Wuhan 430068, PR China; Glyn O. Phillips Hydrocolloid Research Centre, School of Food and Biological Engineering, Hubei University of Technology, Nanli Road, Wuhan 430068, PR China
| | - Zhiming Gao
- Cooperative Innovation Center of Industrial Fermentation (Ministry of Education & Hubei Province), Hubei University of Technology, Nanli Road, Wuhan 430068, PR China; Glyn O. Phillips Hydrocolloid Research Centre, School of Food and Biological Engineering, Hubei University of Technology, Nanli Road, Wuhan 430068, PR China.
| | - Bing Hu
- Key Laboratory of Biotechnology and Bioresources Utilization of Ministry of Education, School of Life Sciences, Dalian Minzu University, Dalian 116600, PR China
| | - Yanlei Li
- Cooperative Innovation Center of Industrial Fermentation (Ministry of Education & Hubei Province), Hubei University of Technology, Nanli Road, Wuhan 430068, PR China; Glyn O. Phillips Hydrocolloid Research Centre, School of Food and Biological Engineering, Hubei University of Technology, Nanli Road, Wuhan 430068, PR China
| | - Yuehan Wu
- Cooperative Innovation Center of Industrial Fermentation (Ministry of Education & Hubei Province), Hubei University of Technology, Nanli Road, Wuhan 430068, PR China; Glyn O. Phillips Hydrocolloid Research Centre, School of Food and Biological Engineering, Hubei University of Technology, Nanli Road, Wuhan 430068, PR China
| | - Zhengpeng Feng
- Pro-Health (China), West Ring South Road BDA, Beijing 100176, PR China
| |
Collapse
|
6
|
Geng Z, Bo T, Zhou W, Tan X, Ye J, Yu T. Deciphering the Superior Electronic Transmission Induced by the Li-N Ligand Pairs Boosted Photocatalytic Hydrogen Evolution. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2206673. [PMID: 36703518 DOI: 10.1002/smll.202206673] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/29/2022] [Revised: 12/25/2022] [Indexed: 06/18/2023]
Abstract
Atomic level decoration route is designated as one of the attractive methods to regulate both the charge density and band structure of photocatalysts. Moreover, to enable more efficient separation and transport of photocarriers, the construction of novel active sites can enhance both the reactivity and electrical conductivity of the crystal. Herein, an Li-N ligand is constructed via co-doping lithium and nitrogen atoms into ZnIn2 S4 lattice, which achieves a promoted photocatalytic H2 evolution at 9737 µmol g-1 h-1 . The existence of Li-N ligand pairs and the behaviors of photocarriers on L40 N5 ZIS are determined systematically, which also provides a unique insight into the mechanism of the improved photocarrier migration rate. With the introduction of Li-N dual sites, the vacancy form of ZnIn2 S4 has changed and the photocatalytic stability is significantly improved. Interestingly, the change of charge density around Li-N ligand in ZnIn2 S4 is determined by theoretical simulations, as well as the regulated energy barrier of photocatalytic water splitting caused by Li-N dual sites, which act as both adsorption site for H2 O and stronger reactive sites. This work helps to extend the understanding of ZnIn2 S4 and offers a fresh perspective for the creation of a Li-N co-doped photocatalyst.
Collapse
Affiliation(s)
- Zikang Geng
- School of Chemical Engineering and Technology, Tianjin University, No.135, Yaguan Road, Tianjin, 300350, P. R. China
| | - Tingting Bo
- School of Science, Tianjin University, No.135, Yaguan Road, Tianjin, 300350, P. R. China
| | - Wei Zhou
- School of Science, Tianjin University, No.135, Yaguan Road, Tianjin, 300350, P. R. China
| | - Xin Tan
- School of Environmental Science and Engineering, Tianjin University, No.135, Yaguan Road, Tianjin, 300350, P. R. China
- School of Science, Tibet University, No. 36, Jiangsu Road, Lhasa, 850000, P. R. China
| | - Jinhua Ye
- International Center for Materials Nano architectonics (WPI-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, 305-0047, Japan
| | - Tao Yu
- School of Chemical Engineering and Technology, Tianjin University, No.135, Yaguan Road, Tianjin, 300350, P. R. China
| |
Collapse
|
7
|
Hu J, Song J, Han X, Wen Q, Yang W, Pan W, Jian S, Jiang S. Fabrication of Ce-La-MOFs for defluoridation in aquatic systems: A kinetics, thermodynamics and mechanisms study. Sep Purif Technol 2023. [DOI: 10.1016/j.seppur.2023.123562] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/11/2023]
|
8
|
Ashraf I, Li R, Chen B, Al-Ansari N, Rizwan Aslam M, Altaf AR, Elbeltagi A. Nanoarchitectonics and Kinetics Insights into Fluoride Removal from Drinking Water Using Magnetic Tea Biochar. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 2022; 19:13092. [PMID: 36293670 PMCID: PMC9603494 DOI: 10.3390/ijerph192013092] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/24/2022] [Revised: 10/01/2022] [Accepted: 10/03/2022] [Indexed: 06/16/2023]
Abstract
Fluoride contamination in water is a key problem facing the world, leading to health problems such as dental and skeletal fluorosis. So, we used low-cost multifunctional tea biochar (TBC) and magnetic tea biochar (MTBC) prepared by facile one-step pyrolysis of waste tea leaves. The TBC and MTBC were characterized by XRD, SEM, FTIR, and VSM. Both TBC and MTBC contain high carbon contents of 63.45 and 63.75%, respectively. The surface area of MTBC (115.65 m2/g) was higher than TBC (81.64 m2/g). The modified biochar MTBC was further used to remediate the fluoride-contaminated water. The fluoride adsorption testing was conducted using the batch method at 298, 308, and 318 K. The maximum fluoride removal efficiency (E%) using MTBC was 98% when the adsorbent dosage was 0.5 g/L and the fluoride concentration was 50 mg/L. The experiment data for fluoride adsorption on MTBC best fit the pseudo 2nd order, rather than the pseudo 1st order. In addition, the intraparticle diffusion model predicts the boundary diffusion. Langmuir, Freundlich, Temkin, and Dubnin-Radushkevich isotherm models were fitted to explain the fluoride adsorption on MTBC. The Langmuir adsorption capacity of MTBC = 18.78 mg/g was recorded at 298 K and decreased as the temperature increased. The MTBC biochar was reused in ten cycles, and the E% was still 85%. The obtained biochar with a large pore size and high removal efficiency may be an effective and low-cost adsorbent for treating fluoride-containing water.
Collapse
Affiliation(s)
- Imtiaz Ashraf
- School of Chemical Engineering, Northwest University, Xi’an 710069, China
| | - Rong Li
- School of Chemical Engineering, Northwest University, Xi’an 710069, China
| | - Bin Chen
- School of Chemical Engineering, Northwest University, Xi’an 710069, China
| | - Nadhir Al-Ansari
- Department of Civil, Environmental and Natural Resources Engineering, Luleå University of Technology, 97187 Luleå, Sweden
| | - Muhammad Rizwan Aslam
- College of Environmental and Resource Sciences, Zhejiang University, Hangzhou 310027, China
| | - Adnan Raza Altaf
- College of Engineering, Huazhong Agricultural University, Wuhan 430070, China
| | - Ahmed Elbeltagi
- Agricultural Engineering Department, Faculty of Agriculture, Mansoura University, Mansoura 35516, Egypt
| |
Collapse
|
9
|
zhuoga C, Nie Y, Li Y, Hu H, Huang X, Tan X, Yu T. Fe doped g-C3N4 composited ZnIn2S4 promoting Cr(VI) photoreduction. CHINESE CHEM LETT 2022. [DOI: 10.1016/j.cclet.2022.08.006] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
10
|
Zhang Q, Tan X, Yu T. Effectively arsenic(V) and fluoride removal in geothermal water using magnetic Fe3O4@MgO nanoparticles. CHINESE CHEM LETT 2022. [DOI: 10.1016/j.cclet.2022.107748] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
11
|
Chen L, Qiang T, Chen X, Ren W, Zhang HJ. Gelatin from leather waste to tough biodegradable packaging film: One valuable recycling solution for waste gelatin from leather industry. WASTE MANAGEMENT (NEW YORK, N.Y.) 2022; 145:10-19. [PMID: 35490538 DOI: 10.1016/j.wasman.2022.04.023] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/08/2022] [Revised: 03/18/2022] [Accepted: 04/15/2022] [Indexed: 06/14/2023]
Abstract
Large amount of gelatin can be extracted from the solid waste in leather industry. The advanced application of such gelatin is always desired by the leather industry, but remains challenging. Considering the urgent requirement of biodegradable plastic film, in this study, the gelatin extracted from waste skin scrap in the leather industry was used to fabricate a waste gelatin-based film with a high gelatin content, excellent mechanical performance, and autonomous biodegradability in natural soil. The film was prepared by introducing covalent bonds and metal-ligand bonds to the gelatin matrix. These covalent bonds, metal-ligand bonds, and inherent hydrogen bonds in the gelatin matrix serve as multiple sacrificial bonds for effective energy dissipation giving the waste gelatin-based film excellent mechanical parameters with the highest fracture stress of ≈ 32 MPa, maximum fracture strain of ≈1.25 mm/mm, and a high Young's modulus of ≈ 471 MPa, which are significantly higher than those of the original gelatin film (fracture stress ≈ 4 MPa, fracture strain ≈ 0.70 mm/mm, and Young's modulus ≈ 22 MPa). Owing to the water resistance of covalent bonds and metal-ligand bonds existed in gelatin matrix, the gelatin film possesses good water resistance. Additionally, after use, the fabricated film can completely biodegrade in natural soil in approximately 7 weeks. This strategy not only provides a valuable recycling solution for the gelatin from the unwelcome solid waste of the leather industry, but it also broadens the range of ecofriendly and cost effective biodegradable films available.
Collapse
Affiliation(s)
- Liang Chen
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China; National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Taotao Qiang
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China; National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an 710021, China.
| | - Xuejun Chen
- Glorious Sun Guangdong School of Fashion, Huizhou University, Huizhou 516007, China
| | - Wenqi Ren
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China; National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Hui Jie Zhang
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China; National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an 710021, China.
| |
Collapse
|
12
|
Ghosh S, Malloum A, Igwegbe CA, Ighalo JO, Ahmadi S, Dehghani MH, Othmani A, Gökkuş Ö, Mubarak NM. New generation adsorbents for the removal of fluoride from water and wastewater: A review. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2021.118257] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/08/2023]
|