Carbon dots-peroxyoxalate micelle as a highly luminous chemiluminescence system under physiological conditions

Progress in Signal Amplification and Microstructure Manufacturing for Photoelectrochemical Sensing

Photoelectrochemical (PEC) sensing based on chemical or biological recognition has received a tremendous amount of attention in recent years, providing analytical chemists a plethora of opportunities. However, emerging techniques and unknown processes in this field remain unexplored. We summarize the recently reported PEC sensing methods. First, we briefly describe the basic principles and technical characteristics of PEC sensing. Next, we highlight the application of various materials, nucleic acids, and other strategies for amplifying PEC signals. Finally, we discuss the current state of knowledge regarding the realization of miniaturized equipment during PEC sensor manufacturing. Summarizing the technological advances and research breakthroughs in PEC sensing over time can help increase the quality of follow-up research.

Surface-Defect-Involved Chemiluminescence Boosted by Gold-Silver Bimetallic Nanoclusters for Bioanalysis

Chemiluminescence (CL) as a powerful analytical tool has garnered increasing interest. However, traditional molecular-based CL luminophores suffer from low emission efficiency due to limited total CL photons emitted per luminophore, driving efforts to explore amplified strategies or novel probes to boost the emission. Although metal nanoclusters (NCs) as luminescent nanoprobes have been extensively studied for electrochemiluminescence and photoluminescence (PL) owing to their intriguing luminescent properties, the CL performance using metal NCs as emitters is often ignored. Herein, based on the synergistic effect within the bimetallic NCs, a series of glutathione-coated Au-Ag bimetallic NCs (GSH-AuAg NCs) were optimized by adjusting precursor ratios and achieved the maximum CL response at a Au:Ag molar ratio of 5:1. To our surprise, CL emission with GSH-AuAg NCs as emitters was triggered with oxidant reagents such as KMnO4, and bimetallic NCs display boosted CL emission (ca. 6.2-fold) compared to monometallic NCs owing to the synergistic effect on enhancing the emission efficiency. Surface-defect-involved CL was revealed by collecting the CL spectra with a maximum emission wavelength of around 750 nm and an obvious red shift of 140 nm compared to PL spectra. The mechanism reveals the KMnO4-injected hole into the valence band through redox reactions with GSH ligands, leading to CL emission by efficient radiative charge recombination with pre-existing electron. A sensing platform based on the GSH-AuAg NCs/oxidant system was constructed for sensing H2O2 and glucose, demonstrating the potential of GSH-AuAg NCs as CL emitters in analytical applications.

Impact of NH4+ on the catalytic activity of G-quadruplex/hemin DNAzyme for chemiluminescent sensing

G-quadruplex/hemin DNAzyme, a versatile tool for biosensing, is challenged by its low peroxidase-mimic activities. The addition of NH4+ may offer an efficient approach to improve its activity. However, the detailed impact of NH4+ on its catalytic activity remains unclear, confusing the selection of appropriate DNAzymes for biosensing applications. Here, we conducted a comprehensive examination of the influence of NH4+ on G-quadruplex/hemin DNAzyme. The results revealed that all DNAzymes with different G-quadruplex topologies exhibited increased catalytic activities in the presence of NH4+ relative to K+, followed by the subsequent activity order: parallel > hybrid > antiparallel. Further investigations indicated that the increased catalytic activity can be ascribed to the increased stability of the G-quadruplex/hemin complex, elevated reaction velocity, and improved substrate affinity. Leveraging the significant disparity in enzymatic activity between parallel and antiparallel G-quadruplexes, an allosteric sensor based on the Pb2+-induced topological conformation was developed for sensitive detection of Pb2+ in the NH4+-boosted G-quadruplex/hemin DNAzyme system (LOD, 1.56 nM), indicating potential for practical applications. Our discovery improves the understanding of NH4+-boosted G-quadruplex/hemin DNAzyme and may facilitate the development of biosensors.

The Molecular Basis of Organic Chemiluminescence

Bioluminescence (BL) and chemiluminescence (CL) are interesting and intriguing phenomena that involve the emission of visible light as a consequence of chemical reactions. The mechanistic basis of BL and CL has been investigated in detail since the 1960s, when the synthesis of several models of cyclic peroxides enabled mechanistic studies on the CL transformations, which led to the formulation of general chemiexcitation mechanisms operating in BL and CL. This review describes these general chemiexcitation mechanisms-the unimolecular decomposition of cyclic peroxides and peroxide decomposition catalyzed by electron/charge transfer from an external (intermolecular) or an internal (intramolecular) electron donor-and discusses recent insights from experimental and theoretical investigation. Additionally, some recent representative examples of chemiluminescence assays are given.

Clustered Regularly Interspaced Short Palindromic Repeats-Associated Proteins13a combined with magnetic beads, chemiluminescence and reverse transcription-recombinase aided amplification for detection of avian influenza a (H7N9) virus

Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) and Clustered Regularly Interspaced Short Palindromic Repeats-Associated Proteins (CRISPR-Cas) have promising prospects in the field of nucleic acid molecular diagnostics. However, Clustered Regularly Interspaced Short Palindromic Repeats-based fluorescence detection technology is mainly hindered by proteins with conjugated double bonds and autofluorescence, resulting in high fluorescence background, low sensitivity and incompatible reaction systems, which are not conducive to automatic clinical testing. Chemiluminescence (CL) detection technology has been applied mainly owing to its greatly high sensitivity, as well as low background and rapid response. Therefore, we developed a rapid, ultrasensitive and economical detection system based on Clustered Regularly Interspaced Short Palindromic Repeats-Clustered Regularly Interspaced Short Palindromic Repeats-Associated Proteins 13a combined with magnetic beads (MBs) and chemiluminescence (CL) (Cas13a-MB-CL) to detect Influenza A (H7N9), an acute respiratory tract infectious disease. The carboxyl functionalized magnetic beads (MBs-COOH) were covalently coupled with aminated RNA probe while the other end of the RNA probe was modified with biotin. Alkaline phosphatase labeled streptavidin (SA-ALP) binds with biotin to form magnetic beads composites. In presence of target RNA, the collateral cleavage activity of Cas13a was activated to degrade the RNA probes on MBs and released Alkaline phosphatase from the composites. The composites were then magnetically separated followed by addition of ALP substrate Disodium 2-chloro-5-{4-methoxyspiro [1,2-dioxetane-3,2'-(5'-chloro) tricyclo (3.3.1.13,7) decan]-4-yl}-1-phenyl phosphate (CDP-star), to generate the chemiluminescence signal. The activity of Associated Proteins 13a and presence of target RNA was quantified by measuring the chemiluminescence intensity. The proposed method accomplished the detection of H7N9 within 30 min at 25°C. When combined with Reverse Transcription- Recombinase Aides Amplification (RT-RAA), the low detection limit limit of detection was as low as 19.7 fM (3S/N). Our proposed MB-Associated Proteins 13a-chemiluminescence was further evaluated to test H7N9 clinical samples, showing superior sensitivity and specificity.

An Update on General Chemiexcitation Mechanisms in Cyclic Organic Peroxide Decomposition and the Chemiluminescent Peroxyoxalate Reaction in Aqueous Media

Four-membered ring peroxides are intimately linked to chemiluminescence and bioluminescence transformations, as high-energy intermediates responsible for electronically excited state formation. The synthesis of 1,2-dioxetanes and 1,2-dioxetanones enabled mechanistic studies on their decomposition occurring with the formation of electronically excited carbonyl products in the singlet or triplet state. The third member of this family, 1,2-dioxetanedione, has been postulated as the intermediate in the peroxyoxalate reaction, recently confirmed by kinetic studies on peroxalic acid derivatives. Several general chemiexcitation mechanisms have been proposed as model systems for the chemiexcitation step in efficient bioluminescence and chemiluminescence transformations. In this review article, we discuss the validity and efficiency of the most important chemiexcitation mechanisms, extended to aqueous media, where the efficiency is known to be drastically reduced, specifically in the peroxyoxalate reaction, highly efficient in anhydrous environment, but much less efficient in aqueous media. Mechanistic studies of this reaction will be discussed in diverse aqueous environments, with special attention to the catalysis involved in the thermal reaction leading to the formation of the high-energy intermediate and to the chemiexcitation mechanism, as well as emission quantum yields. Finally, several recent analytical and bioanalytical applications of the peroxyoxalate reaction in aqueous media will be given.

Aggregation-Induced Emission Effect within Peroxyoxalate-Loaded Mesoporous Silica Nanoparticles for Efficient Harvest of Chemiluminescence Energy in Aqueous Solutions

Aggregation-induced emission (AIE) molecules that can avoid the aggregation-caused quenching (ACQ) effect and break the concentration limit have been widely used for biosensing. Similar to fluorescence dyes, AIE molecules can be chemiexcited simply by a peroxyoxalate-based chemiluminescence (CL) reaction, but the hydrolysis of peroxyoxalate is often a problem in an aqueous solution. Herein, we report an AIE effect within peroxyoxalate-loaded silica nanoparticles (PMSNs) for an efficient harvest of CL energy as well as alleviation of bis(2,4,5-trichloro-6-carbopentoxyphenyl) oxalate (CPPO) hydrolysis. Peroxyoxalate (i.e., CPPO) and AIE molecules (i.e., 1,2-benzothiazol-2-triphenylamino acrylonitrile, BTPA) were loaded together within the mesoporous silica nanoparticles (MSNs) to synthesize the BTPA-PMSN nanocomposite. The BTPA-PMSNs not only allowed CPPO to be dispersed well in an aqueous solution but also avoided the hydrolysis of CPPO. Meanwhile, the proximity between BTPA and CPPO molecules in the mesopores of MSNs facilitated the BTPA aggregate to harvest the energy from CL intermediates. Hence, the CL system of BTPA-PMSNs can work efficiently in aqueous solutions at a physiological pH. The CL quantum yield of the BTPA-PMSN system was measured to be 9.91 × 10^-5, about 20 000-fold higher than that obtained in the rhodamine B (RhB, a typical ACQ dye)-PMSN system. Using BTPA-PMSNs for H₂O₂ sensing, a limit of detection (LOD) as low as 5 nM can be achieved, 1000-fold lower than that achieved in the RhB-PMSNs system. Due to the feasibility of working at a physiological pH, this CL system is also quite suitable for the detection of oxidase substrates such as glucose and cholesterol. This BTPA-PMSN CL system with the merits of high CL quantum yield at a physiological pH is appealing for biosensing.