CO2 sorption behavior of imidazole, benzimidazole and benzoic acid based coordination polymers

Coordination Polymer Based on a Triangular Carboxylate Core {Fe(μ3-O)(μ-O2CR)6} and an Aliphatic Diamine

Interaction of the pre-organized complex of iron(II) trimethylacetate and 1,10-phenanthroline (phen) [Fe2(piv)4(phen)2] (1) (piv = (Me)3CCO2-)) with 1,6-diaminohexane (dahx) in anhydrous acetonitrile yielded a 1D coordination polymer [Fe3O(piv)6(dahx)1.5]n (2) and an organic salt of pivalic acid (H2dahx)(piv)2 (3). The structure of the obtained compounds was determined by single-crystal X-ray diffraction analysis. The phase purity of the complexes was determined by powder X-ray diffraction analysis. According to the single-crystal X-ray analysis, coordination polymer 2 is formed due to the binding of a triangular carboxylate core {Fe3(μ3-O)(μ-piv)6} with an aliphatic diamine ligand. Thermal behavior was investigated for compounds 1 and 2 in an argon atmosphere.

In Situ Conversion of Ligand to a Coordination Polymer via a Core@Shell Crystal: A Multi-Step Phase-Dependent Structural Transformation

Two pseudopolymorphic 1D coordination polymers of the formulas [Cd(3,3'-pytz)(CH3OH)2(ClO4)2]n (1) and [Cd(3,3'-pytz)(CH3CN)2(ClO4)2]n (2) have been prepared using the electron-deficient 3,6-bis(pyridin-3-yl)-1,2,4,5-tetrazine (3,3'-pytz) ligand and cadmium perchlorate in the chloroform/methanol and chloroform/acetonitrile solvent system, respectively. It was observed that compounds 1 and 2 experienced one-step (CPreagent → CPproduct) single-crystal-to-powder structural transformation to the pure water-coordinated compound [Cd(3,3'-pytz)(H2O)2(ClO4)2]n (3) by absorbing water vapor from air (solid-gas phase transformation). Interestingly, compounds 1, 2, and 3 undergo a different transformation path and show an in situ unique three-step (CPreagent → CPproduct → Ligandintermediate → CPproduct) single-crystal-to-single-crystal (SCSC) structural transformation process through soaking in deionized water (solid-liquid phase transformation). In this fascinating transformation, we report for the first time the direct conversion of a ligand into a coordination polymer by a rare core-shell pathway in a solid-liquid phase transformation. In this process, we obtained compound {[Cd(3,3'-pytz)(H2O)4](3,3'-pytz)2(ClO4)2(H2O)6}n (4) (single-crystal = S, crystal = C, or microcrystal = P) as mixed compounds of core-shell L@4C and 4S or core-shell L@4P and 4P for compounds (1 and 2) and 3, respectively.

Molecular docking with SARS-CoV-2 and potential drug property of a bioactive novel Zn(II) polymer: A combined experimental and theoretical study

A new Zn(II) coordination polymer based on o-phthalato (Phth) and 2-aminopyridine (2-Ampy) viz. {[Zn(2-Ampy)2(Phth)]∙(H2O)]}n (1) has been synthesized at room temperature and characterized by elemental analyses, electronic spectroscopy, FT-IR spectroscopy, thermal analysis (TGA/DSC), powder X-ray diffraction (PXRD) and single crystal X-ray diffraction. The basic trimeric units of 1 form a polymeric chain by N-H⋯O and π⋯π interactions. These polymeric chains interconnect through various non-covalent interactions in two perpendicular directions to ultimately give rise to a 3D architecture of 1. The interesting non-covalent interactions in 1, contributing to its stability in the solid state are studied by Hirshfeld surface analysis and other different theoretical tools. Molecular docking study of 1 is performed against six different proteins of SARS-CoV-2. The drug potential of the synthesized compound is evaluated by ADMET calculations.

Synthesis, characterization and biocompatibility of guar gum-benzoic acid

A novel chemical functionalization of guar gum (GG) by benzoic acid (BA) via nucleophilic substitution reaction in aqueous solution has been reported. BA moieties are chosen due to coordination chemistry of carboxylic acid moieties, hydrophobicity and intermolecular interaction of aromatic rings. The presence of conjugated BA on guar gum-benzoic acid (GG-BA) with grafting density of 5.5% is confirmed by ¹H NMR. Amorphous GG-BA with irregular morphology has been studied by UV-Vis, FTIR, XRD, SEM, TEM, TGA, computational chemistry and contact angle measurement. GG-BA in a concentration range from 0 to 4000 μg mL^-1 has good biocompatibility to mouse embryonic fibroblasts (MEF), human mammary epithelial cells (MCF-10A) after 48 and 72 h of treatment using WST-1 assay. GG-BA shows great potential for the development of biomaterials such as bioadhesives, hydrogels, and coacervates.

High performance CO2 capture at elevated temperatures by using cenospheres prepared from solid waste, fly ash

Cenospheres (CS) are spherical shaped inorganic frameworks present in with fly ash which is generated from coal-fired thermal power plants. These spherical structures were functionalized with imidazole and amine moieties to capture CO₂ selectively from flue gases at elevated temperature. The functionalized CS have shown a high selectivity for CO₂ adsorption (4.68 mmol g^-1) over N₂ (0.46 mmol g^-1) at 333 K/1 bar from a simulated flue gas (0.15 CO₂ and 0.85 N₂, v%) composition of thermal power plants. When the moisture content reached to 30 vol% the adsorption capacity of CS materials was reduced to 20 vol% as compared to dry flue gas. The functionalized CS can be used repeatedly for 50 cycles without losing its adsorption capacity. The cost estimate for CO₂ capture by using the proposed adsorption system would be $12.01/ton of CO₂ which is lower as compared to amine absorption system and zeolite-based adsorption system reported in the literature. The CS materials are prepared from solid wastes reduce the cost of production and their large scale manufacturing is technically feasible to capture CO₂ from industrial flue gases efficiently in near future.

Intrinsic Effect of Pyridine-N-Position on Structural Properties of Cu-Based Low-Dimensional Coordination Frameworks

Metal-organic assemblies have received significant attention for catalytic and other applications, including gas and energy storage, due to their porosity and thermal/chemical stability. Here, we report the synthesis and physicochemical characterization of three metallosupramolecular assemblies consisting of isomeric ambidentate pyridyl-β-diketonate ligands L1–L3 and Cu(II) metal ions. It has been demonstrated that the topology and dimensionality of generated supramolecular aggregates depend on the location of the pyridine nitrogen donor atom in L1–L3. This is seen in characterization of two distinct 2D polymeric assemblies, i.e., [Cu(L1)₂]_n and [Cu(L2)₂]_n, in which both β-diketonate and pyridine groups are coordinated to the Cu(II) center, as well as in characterization of the mononuclear 1D complex Cu(L3)₂, in which the central atom is bound only by two β-diketonate units.

Novel and effective strategy of dual bis(trifluoromethylsulfonyl)imide imidazolium ionic liquid immobilized on periodic mesoporous organosilica for greener cycloaddition of carbon dioxide to epoxides

Novel periodic mesoporous organosilica supported ionic liquids were prepared, characterized and evaluated as catalysts for cycloaddition of CO₂ to epoxides.

Light-harvesting, 3rd generation RuII/CoII MOF with a large, tubular channel aperture

A photoactive, hetero-metallic CoII/RuII-based metal-organic framework (MOF) with a large channel aperture, ca. 21 Å, is reported. The photophysical properties of the MOF are derived from the RuII nodes giving rise to emission centred at ca. 620 nm and relatively long triplet 3MLCT lifetimes. In addition to the optical attributes, the 1H-imidazo [4,5-f][1,10]-phenanthroline ligand imparts structural functionality to the MOF which is composed of alternating CoII- and RuII-based nodes of Δ and Λ helicity. The framework maintains its integrity upon activation and shows gas sorption behaviour that is characteristic of mesoporous materials promoting high CO2 sorption capacities and selectivities over N2.

Tuning Expanded Pores in Metal-Organic Frameworks for Selective Capture and Catalytic Conversion of Carbon Dioxide

Three Co-based isostructural MOF-74-III materials with expanded pores are synthesized, with varied extent of fused benzene rings onto sidechain of same-length ligands to finely tune the pore sizes to 2.6, 2.4, and 2.2 nm. Gas sorption results for these highly mesoporous materials show that alternately arranged fused benzene rings on one side of the ligand could serve as extra anchoring sites for CO₂ molecules with π-π interactions, conspicuously enhancing CO₂ uptake and CO₂ /CH₄ and CO₂ /N₂ selectivity; while more steric hindrance effect towards open Co^II sites were imposed by ligands flanked with fused benzene rings on both sides, compromising such extra-sites enhancement. In the catalytic conversion of CO₂ with propylene oxide to form propylene carbonate, the as-synthesized MOF-74-III(Co) with desired properties of highly exposed and accessible open Co^II centers, large mesopore apertures and multi-interactive sites, demonstrated higher catalytic activity compared with other two MOFs, with benzene rings fused to ligands hampering the functionality of Co^II centers as Lewis acid sites. Our results highlight the viability of finely tuning the expanded pores of MOF-74 isostructure and the effect of fused benzene rings as functional groups onto selective CO₂ capture and conversion.

A fluorine-functionalized microporous In-MOF with high physicochemical stability for light hydrocarbon storage and separation

An ultra-stable fluoro-functional microporous In-MOF with high acetylene and propene/propane adsorption capability and efficient potential for light hydrocarbon separation.

Functionalization of MOFs via a mixed-ligand strategy: enhanced CO2 uptake by pore surface modification

Two isostructural MOFs based on rare quaternary SBUs with a new (3,3,4,6)-connected topology have been assembled, which possess high porosity with highly polar pore systems, and also exhibit high uptake for CO₂ and significant selectivity for CO₂ over CH₄.