Transition metal-catalyzed cross-coupling methodologies for the engineering of small molecules with applications in organic electronics and photovoltaics

Recent developments in polymer chemistry, medicinal chemistry and electro-optics using Ni and Pd-based catalytic systems

Catalysis is the fastest and continuously growing field in chemistry. A key component of this process is catalytic systems, which result in increased reaction rates and yields, as well as the ability to tailor the properties of products to the final application. With the development of catalysis, the requirements for catalysts used in these processes have also grown rapidly. Modern catalytic materials should overcome the challenges posed by the modern world of chemistry. They should be durable, and stable, have good catalytic properties, and allow catalytic processes to be carried out under mild and environmentally friendly conditions. In this article, we provide an overview of recent reports on the use of catalytic systems based on nickel and palladium ions in catalytic reactions, leading to functional materials used in the fields of medicinal chemistry, polymer chemistry and electro-optical materials chemistry. Research on the optimization and modification of existing synthetic methods, reports on the synthesis of new functional materials, and articles on new, more efficient catalytic systems that overcome the drawbacks of existing catalysts are described. The presented article reviews current knowledge, providing the newest information from the world of catalysis and synthesis of advanced functional materials, presenting potential directions for further development in these fields.

Pd-Catalyzed Miyaura Borylation and Telescopic Borylation/Suzuki-Miyaura Cross-Coupling Processes in Deep-Eutectic Solvents

We report an efficient procedure to carry out palladium-catalyzed Miyaura borylation reactions of (hetero)aromatic halides and triflates in choline chloride (ChCl)-based deep eutectic solvents (DESs). The procedure employs bis(pinacolato)diboron as a boron source and a catalyst prepared in situ from readily available Pd2(dba)3 and the phosphine ligand XPhos. Reactions proceed well in different ChCl-based DESs, among which the best results were provided by environmentally friendly and biodegradable mixtures with glycerol and glucose. The reaction tolerates both EDG and EWG substituents on the substrates and can be run on different halides (chloride, bromide, iodide) and pseudohalides (triflate). Furthermore, for several substrates, the catalyst loading can be reduced to 1 mol % Pd (0.5% mol Pd2(dba)3) without compromising the reaction yield. Moreover, we show that the Miyaura borylation protocol in DES can be combined with a subsequent Suzuki-Miyaura cross-coupling reaction in a one-pot procedure, allowing access to various biaryl products and demonstrating its synthetic utility by preparing the precursors of two compounds with reported applications in the photovoltaics sector. Finally, two green metrics (E-factor and EcoScale) of the new one-pot procedure in DES were calculated and compared with literature values to assess the potential advantages in terms of waste reduction, safety, and energy consumption.

Data-Driven Discovery of Organic Electronic Materials Enabled by Hybrid Top-Down/Bottom-Up Design

The high-throughput exploration and screening of molecules for organic electronics involves either a 'top-down' curation and mining of existing repositories, or a 'bottom-up' assembly of user-defined fragments based on known synthetic templates. Both are time-consuming approaches requiring significant resources to compute electronic properties accurately. Here, 'top-down' is combined with 'bottom-up' through automatic assembly and statistical models, thus providing a platform for the fragment-based discovery of organic electronic materials. This study generates a top-down set of 117K synthesized molecules containing structures, electronic and topological properties and chemical composition, and uses them as building blocks for bottom-up design. A tool is developed to automate the coupling of these building blocks at their C(sp2/sp)-H bonds, providing a fundamental link between the two dataset construction philosophies. Statistical models are trained on this dataset and a subset of resulting top-down/bottom-up compounds, enabling on-the-fly prediction of ground and excited state properties with high accuracy across organic compound space. With access to ab initio-quality optical properties, this bottom-up pipeline may be applied to any materials design campaign using existing compounds as building blocks. To illustrate this, over a million molecules are screened for singlet fission. tThe leading candidates provide insight into the features promoting this multiexciton-generating process.

Orange/Red Benzo[1,2-b:4,5-b']dithiophene 1,1,5,5-Tetraoxide-Based Emitters for Luminescent Solar Concentrators: Effect of Structures on Fluorescence Properties and Device Performances

Luminescent solar concentrators (LSCs) are a class of optical devices able to harvest, downshift, and concentrate sunlight, thanks to the presence of emitting materials embedded in a polymer matrix. Use of LSCs in combination with silicon-based photovoltaic (PV) devices has been proposed as a viable strategy to enhance their ability to harvest diffuse light and facilitate their integration in the built environment. LSC performances can be improved by employing organic fluorophores with strong light absorption in the center of the solar spectrum and intense, red-shifted emission. In this work, we present the design, synthesis, characterization, and application in LSCs of a series of orange/red organic emitters featuring a benzo[1,2-b:4,5-b']dithiophene 1,1,5,5-tetraoxide central core as an acceptor (A) unit. The latter was connected to different donor (D) and acceptor (A') moieties by means of Pd-catalyzed direct arylation reactions, yielding compounds with either symmetric (D-A-D) or non-symmetric (D-A-A') structures. We found that upon light absorption, the compounds attained excited states with a strong intramolecular charge-transfer character, whose evolution was greatly influenced by the nature of the substituents. In general, symmetric structures showed better photophysical properties for the application in LSCs than their non-symmetric counterparts, and using a donor group of moderate strength such as triphenylamine was found preferable. The best LSC built with these compounds presented photonic (external quantum efficiency of 8.4 ± 0.1%) and PV (device efficiency of 0.94 ± 0.06%) performances close to the state-of-the-art, coupled with a sufficient stability in accelerated aging tests.

Potassium Trimethylsilanolate-Promoted, Anhydrous Suzuki-Miyaura Cross-Coupling Reaction Proceeds via the "Boronate Mechanism": Evidence for the Alternative Fork in the Trail

Previous studies have shown that the critical transmetalation step in the Suzuki-Miyaura cross-coupling proceeds through a mechanism wherein an arylpalladium hydroxide complex reacts with an aryl boronic acid, termed the oxo-palladium pathway. Moreover, these same studies have established that the reaction between an aryl boronate and an arylpalladium halide complex (the boronate pathway) is prohibitively slow. Herein, studies on isolated intermediates, along with kinetic analysis, have demonstrated that the Suzuki-Miyaura reaction promoted by potassium trimethylsilanolate (TMSOK) proceeds through the boronate pathway, in contrast with other, established systems. Furthermore, an unprecedented, binuclear palladium(I) complex containing a μ-phenyl bridging ligand was characterized by NMR spectroscopy, mass spectrometry, and computational methods. Density functional theory (DFT) calculations suggest that the binuclear complex exhibits an open-shell ground electronic state, and reaction kinetics implicate the complex in the catalytic cycle. These results expand the breadth of potential mechanisms by which the Suzuki-Miyaura reaction can occur, and the novel binuclear palladium complex discovered has broad implications for palladium-mediated cross-coupling reactions of aryl halides.

An indole-amide-based phosphine ligand enabling a general palladium-catalyzed sterically hindered Suzuki-Miyaura cross-coupling reaction

A novel family of indole-amide-based phosphine ligands was designed and synthesized. The Pd/InAm-phos (L1) catalytic system exhibited excellent efficiency in the Suzuki-Miyaura cross-coupling of sterically hindered (hetero)aryl chlorides to synthesize tri-ortho-substituted biaryls. Excellent product yields were obtained in a short reaction time (e.g., 10 min), and a Pd catalyst loading down to 50 ppm was also achieved. The oxidative addition adduct of Pd-L1 with 2-chlorotoluene was also well-characterized by single-crystal X-ray crystallography and showed a κ²-P,O-coordination of L1 with palladium.

Accurate predictions of the electronic excited states of BODIPY based dye sensitizers using spin-component-scaled double-hybrid functionals: a TD-DFT benchmark study

The vertical excitation energies of 13 BODIPY based dye sensitizers are benchmarked by means of TD-DFT, using 36 functionals from different DFT rungs. Most TD-DFT results were found to overestimate the excitation energies, and show mean absolute error (MAE) values in the range 0.2-0.5 eV. The dispersion-corrected, spin-component-scaled, double-hybrid (DSD) functionals DSD-BLYP and DSD-PBEP86 were found to have the smallest MAE values of 0.083 eV and 0.106 eV, respectively, which is close to the range of average errors found in the more expensive coupled-cluster methods. Moreover, DSD-BLYP and DSD-PBEP86 functionals show excellent consistency and quality of results (standard deviation = 0.048 eV and 0.069 eV respectively). However, the range separated hybrid (RSH) and the range separated double hybrid (RSDH) functionals were found to provide the best predictability (linear determination coefficient R 2 > 0.97 eV).

Assessment of time-dependent density functionals for the electronic excitation energies of organic dyes used in DSSCs

The absorption spectra modeled as the vertical excitation energies of 13 dye sensitizers used in dye-sensitized solar cells (DSSCs) are benchmarked by means of time-dependent (TD)-DFT, using 36 functionals from different DFT rungs.

New Unsymmetrically Substituted Benzothiadiazole-Based Luminophores: Synthesis, Optical, Electrochemical Studies, Charge Transport, and Electroluminescent Characteristics

Three new benzothiadiazole (BTD)-containing luminophores with different configurations of aryl linkers have been prepared via Pd-catalyzed cross-coupling Suzuki and Buchwald–Hartwig reactions. Photophysical and electroluminescent properties of the compounds were investigated to estimate their potential for optoelectronic applications. All synthesized structures have sufficiently high quantum yields in film. The BTD with aryl bridged carbazole unit demonstrated the highest electrons and holes mobility in a series. OLED with light-emitting layer (EML) based on this compound exhibited the highest brightness, as well as current and luminous efficiency. The synthesized compounds are not only luminophores with a high photoluminescence quantum yield, but also active transport centers for charge carriers in EML of OLED devices.

Direct Arylation in the Presence of Palladium Pincer Complexes

Direct arylation is an atom-economical alternative to more established procedures such as Stille, Suzuki or Negishi arylation reactions. In comparison with other palladium sources and ligands, the use of palladium pincer complexes as catalysts or pre-catalysts for direct arylation has resulted in improved efficiency, higher reaction yields, and advantageous reaction conditions. In addition to a revision of the literature concerning intra- and intermolecular direct arylation reactions performed in the presence of palladium pincer complexes, the role of these remarkably active catalysts will also be discussed.

Direct Iodination of Electron-Deficient Benzothiazoles: Rapid Access to Two-Photon Absorbing Fluorophores with Quadrupolar D-π-A-π-D Architecture and Tunable Heteroaromatic Core

Direct iodination of benzothiazoles under strong oxidative/acidic conditions leads to a mixture of iodinated heteroarenes with 1-2 major components, which are easily separable and which structures depend on the I₂ equivalents used. Among the unexpected but dominant products were identified 4,7-diiodobenzothiazoles with a rare substitution pattern for S_EAr reactions of this scaffold. These were employed in the synthesis of 4,7-bis(triarylamine-ethynyl)benzothiazoles - a new class of highly efficient quasi-quadrupolar fluorophores displaying large two-photon absorption cross sections (540-1374 GM) in the near-infrared region.

Polymer Beads Decorated with Dendritic Systems as Supports for A3 Coupling Catalysts

Abstract

The gel type microscopic polymer beads bearing epoxy functionalities were modified using the two-stage procedures in order to decorate their surface with the moieties of the zeroth order PAMAM type dendrimer and different heterocyclic aldehydes (2-pyridinecarboxaldehyde, 2-pyrrolidinecarboxaldehyde, furfural or 2-thiophenecarboxaldehyde). The polymeric supports provided in this manner were then used for the immobilization of copper(II) ions. The resulting materials were characterized using different instrumental techniques (optical microscopy, SEM, FTIR microscopy, DR UV–Vis, ICP-OES, and thermal analysis). They were also used as catalysts in the model A3 coupling reaction of benzaldehyde, morpholine and phenylacetylene. The best catalytic activity was found for the polymeric catalyst bearing 2-pyridinecarboxaldehyde moieties. It turned out to be effective in the A3 coupling reactions included different benzaldehyde, alkyne, and secondary amine derivatives, as well. It could also be recycled several times without a significant decrease in its activity in the model A3 coupling reaction.

Graphic Abstract

Comparative study of aryl halides in Pd-mediated reactions: key factors beyond the oxidative addition step

The comparative experimental study of Ar–X (X = Cl, Br, I) reactivity and analysis reported herein suggest that oxidative addition cannot be considered the sole reason of the observed low reactivity of aryl chlorides.

An easily fabricated palladium nanocatalyst on magnetic biochar for Suzuki–Miyaura and aryl halide cyanation reactions

A sustainable biochar material for the synthesis of a novel heterogeneous catalyst for organic reactions is reported.

Photocyclization of diarylethylenes with a boronate moiety: a useful synthetic tool to soluble PAH building blocksf

The synthesis of ten ortho-fused PAHs bearing boronic pinacol ester groups (BPin) is reported. The products are obtained via modification of Mallory photocyclization in 45-99% yields. Among them are examples of highly strained molecules such as [4]helicene derivatives with BPin substituents in the cavity. The method allows double C-C coupling and tolerates more than one BPin functionality.

Combined LCA and Green Metrics Approach for the Sustainability Assessment of an Organic Dye Synthesis on Lab Scale

New generation photovoltaic devices have attracted much attention in the last decades since they can be efficiently manufactured employing abundant raw materials and with less-energy intensive processes. In this context, the use of powerful environmental assessment is pivotal to support the fine-tuning of solar cells fabrication and hit the target of manufacturing effective sustainable technological devices. In this work, a mass-based green metrics and life cycle assessment combined approach is applied to analyze the environmental performances of an innovative synthetic protocol for the preparation of organic dye TTZ5, which has been successfully proposed as sensitizer for manufacturing dye sensitized solar cells. The new synthetic strategy, which is based on the C-H activation process, has been compared with the previously reported synthesis employing classic Suzuki-Miyaura cross-coupling chemistry. Results highlight the contribution of direct energy consumption and purification operations in organic syntheses at lab scale. Furthermore, they demonstrate the usefulness of the environmental multifaceted analytic tool and the power of life cycle assessment to overcome the intrinsic less comprehensive nature of green metrics for the evaluation of organic synthetic protocols.