Near-infrared (NIR) lanthanide molecular probes for bioimaging and biosensing

Structural diversity of photoluminescent lanthanide(III) coordination compounds with an isothiazole derivative

Two different series of europium(III), terbium(III) and gadolinium(III) complexes with 4,5-dichloroisothiazole-3-carboxylic acid (HL) were obtained. According to the data obtained from various analysis methods, the first type of coordination compounds with the general formula of [Ln(H2O)L2(OAc)]n was polymer chains, and the second type with the general formula of [Ln6(H2O)10L18] was hexanuclear complexes, with central atoms arranged similar to octahedrons. DFT calculations were used to determine the location of the electron density in HOMO/LUMO and the value of the triplet state energy of the ligand molecule. The highest luminescence quantum yield was observed in the case of the hexanuclear terbium(III) complex (24%) with a millisecond luminescence lifetime, while the hexanuclear europium(III) compound (96%) exhibited the highest value of color purity.

Design and Evolution of a Phosphorescent Protein via the Proximal Encoding of Lanthanide and the Antenna Chromophore

Genetically encoded phosphorescent proteins with extended luminescence lifetimes provide an orthogonal channel for biological imaging and detection. While conventional fluorescent proteins typically exhibit nanosecond-scale lifetimes, the development of proteins with longer lifetimes enables time-resolved detection and enhanced signal-to-noise ratios. Here, we designed a novel phosphorescent protein system by incorporating photosensitizing unnatural amino acids (UAAs) proximal to the metal center of a lanthanide binding protein (LanM). Through systematic optimization of the incorporation sites, we achieved considerable enhancement in lanthanide phosphorescence compared with that of the wild-type LanM protein. The subsequent directed evolution of LanM and chemical evolution of UAA yielded variants with an additional muti-fold increase in signal intensity. This iterative optimization strategy generated phosphorescent proteins with extended lifetimes of up to 500 μs and significantly increased brightness. Using this phosphorescence protein platform, a europium sensor with a signal-to-noise ratio of more than 100 for 200 nM Eu(III) and a detection limit of less than 10 nM was developed. In addition, a protease sensor was further designed by inserting a cleavage site into a loop of the phosphorescent protein, achieving remarkable signal-to-noise ratios at nanomolar concentrations. Finally, this phosphorescent protein was fused to the affibody and further used for immunofluorescence imaging. These applications demonstrated a novel platform for developing genetically encoded sensors with enhanced detection sensitivity through time-resolved measurements.

Near-Infrared Ytterbium Complexes Based on Polycyclic Aromatic Dicarboxylate Ligands and the Solution-Processed NIR OLED with Irradiance up to 110,284 μW/m2

Since the O-H and N-H oscillators of solvent molecules attached to ytterbium ion (Yb3+) and C-H oscillators existing in the inner coordination sphere of Yb3+ would quench the excited energy of Yb(III), which leads to low quantum yields (QYs) of Yb(III) complexes, we aimed to design a ligand that could block solvent molecules and C-H oscillators out of the first coordination sphere of Yb3+. Herein, a series of novel polycyclic aromatic dicarboxylate ligands are designed and synthesized to effectively protect Yb3+ from solvent molecules and efficiently sensitize Yb3+ luminescence, while the cost and sophistication of the synthesis are satisfactory. Therein, [Yb(MO-DPyPDA)2](DIEA) exhibited a considerable QY of 5.20% and a long luminescent lifetime of 102 μs in CD3OD. The single-crystal structure demonstrates that there are no solvent molecules and C-H oscillators existing in the inner coordination sphere of Yb3+, which is conducive to alleviating the quenching effect. Meanwhile, we also carried out experiments to verify that it was thermodynamically feasible for ligands to sensitize the luminescence of center ion through internal redox processes. Moreover, several groups of near-infrared organic light-emitting diodes based on [Yb(DTFM-DPyPDA)2](DIEA) were fabricated based on the solution-processing method, and the highest irradiance of 110,284 μW/m2 was realized by optimizing the device structure.

Dual emissive ytterbium(III) complexes with π-conjugated BODIPY-bipyridine ligands

Four BODIPY-functionalized bipyridine ligands (B1, B2, B3 and B4) were synthesized for sensitizing the near-infrared emission of Yb(III) ions. In these ligands, a BODIPY moiety was conjugated to 2,2'-bipyridine through an acetylene spacer at its C2 position, whereas its C6 position was substituted by H (B1), iodine (B2), 4-carboxylphenylacetylene (B3) or 4-thiocyanophenylacetylene (B4). The ligands exhibit strong absorption in the visible region and readily form stable complexes with ytterbium(III) trishexafluoroacetylacetonate (hfac-) hydrate in dichloromethane. Single-crystal X-ray diffraction analysis for Yb-B2 showed that the BODIPY unit almost falls into the bipyridine plane with Yb(III) being coordinated by six O from hfac- and two N atoms from bipyridine. All complexes exhibit strong absorption between 530 and 570 nm and can sensitize the ytterbium(III) for its emission at 980 nm under the UV-VIS light illumination. Interestingly, the visible emission from the complex increased when excited at 375 nm, making the complexes dual emissive, which is due to the increased absorption of the complex at 375 nm and inefficient energy transfer from the BODIPY moiety to the Yb(III) ion.

Near Infrared-Circularly Polarized Luminescence/Circular Dichroism Active Yb(III) Complexes Bearing Both Central and Axial Chirality

In this contribution, we present new NIR-CPL/CD active Yb(III) complexes, which are synthesized by combining two ligands characterized by different types of chirality: central and axial chirality. The ligand bearing central chirality is represented by the neutral trans-N,N'-bis(2-pyridylmethylidene)-1,2-(R,R or S,S) cyclohexanediamine (L), whereas the axial ligand is 1,1'-binaphthyl-2,2'-diol (BINOL-H2). A combined 1H NMR, thermodynamic (spectrophotometric titrations), and theoretical (DFT structural calculations) study is presented, revealing the high stability in the methanol solution of the homochiral C2-symmetric anionic [YbL(BINOL)2]- complexes, in which the two labile BINOLate molecules exhibit the same stereochemistry (R or S). The metal ion-related optical and chiroptical properties of the complexes in the near-infrared spectral region are here presented and discussed: while the axial chirality dominates the circularly polarized luminescence features, the NIR-CD signal is affected by both chiral elements.

Near-Infrared Nanothermometer Reveals Temperature Discrepancy between Organs and Body Surface for Heatstroke Prevention

Organ temperatures often vary significantly from body surface temperatures during heatstroke, leading to acute organ failure, although body temperature is continuously controlled. However, the exact temperature discrepancy between them remains unclear due to a lack of noninvasive techniques for real-time monitoring of organ temperature fluctuations. Herein, we developed a near-infrared emissive nanothermometer by codoping Nd3+ and Yb3+ to produce two distinct emissions at 980 and 1330 nm under 808 nm excitation. These emissions demonstrated differential responses to temperature variations, enabling the construction of a ratiometric nanoprobe for accurate temperature detection. Notably, the nanoprobe rapidly accumulated in mouse liver after intravenous injection, revealing that liver showed consistently higher temperature than rectum by approximately 1.5 °C. Moreover, liver injury was found to begin at a rectal temperature of 42 °C, rather than the 43 °C conventionally used in heatstroke models. These findings introduce a robust nanothermometer for accurately understanding the pathological progression of heat-related illnesses.

Exploration of ESIPT in 4,6-O-Ethylidene-N-(2-hydroxybenzylidene)-β-D-glucopyranosylamine and Its Application in Selective Turn-on Response Toward Lu(III) ion

4,6-O-Ethylidene-N-(2-hydroxybenzylidene)-β-D-glucopyranosylamine (PL1) exhibits excited state intramolecular proton transfer (ESIPT) mechanism, which has been established by experimental and theoretical calculations. Further, PL1 selectively interacts with Lu3+ ion yielding a turn-on response in methanol, where the emission intensity of the former enhances (~15 fold) after metal ion interaction. The complexation has been investigated using various analytical tools like UV-visible absorption/emission, nuclear magnetic resonance spectroscopy and lifetime studies. The relative quantum yield of PL1 (0.0043) enhances to 0.1025 upon interaction with the Lu3+ ion. The studies on stoichiometry by Job's plot, ESI mass spectrometry and density functional theory calculations revealed the ligand-to-metal interaction in 2 : 1 ratio.

A Comprehensive Review: Versatile Imaging Probe Based on Chemical Materials for Biomedical Applications

Imaging probe and contrast agents play significant role in combating cancer. Based on special chemical materials, imaging probe can convert cancer symptoms into information-rich images with high sensitivity and signal amplification, accompanying with detection, diagnosis, drug delivery and treatment. In the paper, some inorganic and organic chemical materials as imaging probe, including Ultrasound imaging (US), Optical imaging (OP), Photoacoustic imaging (PA), X-ray Computed Tomography (CT), Magnetic Resonance imaging (MRI), Radionuclide imaging (RNI) probe, as well as multi-modality imaging probe for diagnosis and therapy of tumour were introduced. The sophisticated and comprehensive chemical materials as imaging probe were highlighted in detail. Meanwhile, the advantages and disadvantages of the imaging probe were compared. In order to provide some reference and help researchers for construction imaging probe for tumour diagnosis and treatment, it attempts to exhaustively cover the whole field. Finally, the prospect and challenge for imaging probe were discussed.

π-Spacer Engineering: Driving Near-infrared Aggregation Induced-emission and Mechanofluorochromism in Carbazole-biscyanostilbenes

In this study, we report the design and synthesis of two novel carbazole-based bis-cyanostilbenes incorporating phenyl and thiophene π-spacer units to investigate their distinct impacts on photophysical properties. Notably, the thiophene-based derivative exhibits remarkable far-red/near-infrared (NIR) solid-state emission, with an emission peak at 732 nm, which shifts to 750 nm upon mechanical grinding, demonstrating pronounced mechanochromic fluorescence in the NIR region. Although its quantum yield is moderate, the ability to modulate its emission through mechanical stimuli opens exciting opportunities for stimuli-responsive NIR applications. Conversely, the phenyl-based analogue shows excellent solid-state emission at 596 nm, achieving significantly higher quantum yields, due to suppressing π-π interactions. Both compounds also exhibit strong AIE, with the thiophene system emitting at 730 nm and the phenyl-based analogue at 580 nm in the aggregate state. In addition to their optical properties, both derivatives demonstrate remarkable thermal stability and reversible MFC. These intriguing behaviors highlight the critical role of π-spacer engineering in fine-tuning solid-state emission, enhancing stimuli-responsive capabilities, and ensuring robust thermal performance. Overall, our findings provide valuable insights into the design of next-generation NIR-emissive materials, with promising potential for advancing applications in optoelectronics, bioimaging, and smart sensing technologies.

Rare Earth Complex-Based Functional Materials: From Molecular Design and Performance Regulation to Unique Applications

ConspectusRare earth (RE) elements, due to their unique electronic structures, exhibit excellent optical, electrical, and magnetic properties and thus have found widespread applications in the fields of electronics, optics, and biomedicine. A significant advancement in the use of RE elements is the formation of RE complexes. RE complexes, created by the coordination of RE ions with organic ligands, not only offer high molecular design flexibility but also incorporate features such as a broad absorption band and efficient energy transfer of organic ligands. Through the "antenna effect", organic ligands can transfer energy to RE ions, enhancing their luminescence efficiency. Moreover, the modification of the ligands can influence the local environment of the RE ions, thereby regulating their electronic structures and energy-level distributions. This makes it one of the important avenues for the efficient development and utilization of RE resources.The meticulous design of organic ligands during molecular synthesis enables the precise construction and regulation of RE complex structures, which are essential for probing molecular-level structure-performance relations and developing functional materials in fields such as optoelectronics, sensing, and catalysis/energy. Despite notable advancements, challenges persist in refining synthesis methodologies, innovating RE complex-based materials, enhancing stability, gaining better control over device functionality, and realizing high-value applications. This Account summarizes the recent advancements in molecular design and performance regulation achieved by our research group, particularly focusing on the synthesis and functional regulation of RE complex-based materials. We have employed strategies such as coordination self-assembly, in situ coordination, and microstructural evolution to achieve the precise synthesis and functional modulation of RE complex-based materials. These approaches have allowed us to finely tune properties such as the luminescence, electrical performance, and catalytic performance of various material systems. Consequently, we have made considerable strides in multidimensional optical information storage, the development of intelligent biological probes, the preparation of nanocatalysts, and the enhancement of inorganic-organic hybrid perovskite solar cell devices. Finally, we are committed to conducting an in-depth analysis of the challenges and opportunities that arise from the precise synthesis methods, performance regulation strategies, and innovative applications of RE complex-based functional materials. Additionally, we aim to propose potential solutions to current issues. This Account comprehensively summarizes the developments in RE complex-based materials to stimulate innovative thinking and new research directions and to establish a foundation for function-oriented precise synthesis methods.

Enabling Visible Light Sensitization of YbIII, NdIII and ErIII in Dimeric LnIII/GaIII Metallacrowns through Functionalization with RuII Complexes for NIR-II Multiplex Imaging

Multiplex imaging in the second near-infrared window (NIR-II, 1000-1700 nm) provides exciting opportunities for more precise understanding of biological processes and more accurate diagnosis of diseases by enabling real-time acquisition of images with improved contrast and spatial resolution in deeper tissues. Today, the number of imaging agents suitable for this modality remains very scarce. In this work, we have synthesized and fully characterized, including theoretical calculations, a series of dimeric LnIII/GaIII metallacrowns bearing RuII polypyridyl complexes, LnRu-3 (Ln=YIII, YbIII, NdIII, ErIII). Relaxed structures of YRu-3 in the ground and the excited electronic states have been calculated using dispersion-corrected density functional theory methods. Detailed photophysical studies of LnRu-3 have demonstrated that characteristic emission signals of YbIII, NdIII and ErIII in the NIR-II range can be sensitized upon excitation in the visible range through RuII-centered metal-to-ligand charge transfer (MLCT) states. We have also showed that these NIR-II signals are unambiguously detected in an imaging experiment using capillaries and biological tissue-mimicking phantoms. This work opens unprecedented perspectives for NIR-II multiplex imaging using LnIII-based molecular compounds.

Upconverting Luminescent MOF for Highly Sensitive Dual-Mode Recognition of Synthetic Dyes

Lanthanide-based luminescent materials hold promise in sensing applications due to their distinct optical properties. Though advancements in lanthanide-based metal-organic frameworks (MOFs) have enhanced downshifting luminescence, achieving upconversion remains challenging. In this effort, we prepared upconverting ytterbium-doped europium MOFs (x%Yb3+-EuMOFs; x = 10, 20, and 30) via the solvothermal method using 2,6-naphthalenedicarboxylic acid (NDC) as an organic linker. Upconversion (UC) luminescence studies revealed that 30%Yb3+-EuMOF (MOF-3) rapidly detects malachite green (MG, a textile dye) and brilliant green (BG, a food colorant) with excellent sensitivity (λex = 980 nm). Notably, UC luminescence offers a lower detection limit (MG: 36.33 nM, BG: 287.9 nM) compared to the downconverting sensing approach (λex 270 nm), while the related dual-mode luminescence minimizes the risk of false positives from interfering ultraviolet-visible (UV-vis) light-absorbing substances. Upconversion quenching has been linked to the FRET process, with its luminescence assay accurately detecting MG in fish, water, and soil samples under 980 nm excitation (98-105% recovery).

The Many Facets of RuII(dppe)2 Acetylide Compounds

In this contribution, we describe the various research domains in which RuII alkynyl derivatives are involved. Their peculiar molecular properties stem from a strong and intimate overlap between the metal centered d orbitals and the π system of the acetylide ligands, resulting in plethora of fascinating properties such as strong and tunable visible light absorption with a strong MLCT character essential for sensing, photovoltaics, light-harvesting applications or non-linear optical properties. Likewise, the d/π mixing results in tunable redox properties at low potential due to the raising of the HOMO level, and making those compounds particularly suited to achieve redox switching of various properties associated to the acetylide conjugated ligand, such as photochromism, luminescence or magnetism, for charge transport at the molecular level and in field effect transistor devices, or charge storage for memory devices. Altogether, we show in this review the potential of RuII acetylide compounds, insisting on the molecular design and suggesting further research developments for this class of organometallic dyes, including supramolecular chemistry.

Rapid and sensitive detection of vanillylmandelic acid based on a luminescent fourteen-metal Tb(III) planar nanocluster

A 14-metal Tb(III) nanocluster with four CO32- anions as templates was constructed for the quantitative and qualitative detection of vanillylmandelic acid (VMA) with high sensitivity and selectivity. The luminescence response time to VMA is less than ten seconds, and the limit of detection is as low as 0.32 nM in CH3CN.

Qualitative and Quantitative Luminescence Detection of 2,6-Dipicolinic Acid and Levofloxacin Based on a High-Nuclearity Eu(III) Nanomolecular Sensor

Rapid and accurate testing of 2,6-dipicolinic acid (DPA) and levofloxacin (LFX) has been attracting much attention due to the fact that the former is an important biomarker of anthrax spores and the latter is a third-generation fluoroquinolone drug and has been recognized as an important environmental pollutant. Herein, we report the preparation of a 13-metal Eu(III) nanomolecular sensor (molecular sizes: 2.0 × 2.4 × 3.2 nm) bearing a new flexible Schiff base ligand for luminescence testing of DPA and LFX with high selectivity and sensitivity. The rapid enhancement of the Eu(III) luminescence of 1 caused by DPA and LFX is expressed by fitting equation I615nm = k × [C] + a, which can be used to quantitatively detect DPA and LFX concentrations in CH3CN, fetal calf serum (FCS), and a real drug. The response times of 1 to DPA and LFX are less than ten seconds, with detection limits as low as 3.78 × 10-2 to 2.71 nM. The test strips containing 1, as well as 1@SA films, can be used to qualitatively detect DPA and LFX by the color changes under the irradiation of UV light.

LnIII/CuI Bimetallic Nanoclusters with Enhanced NIR-II Luminescence

Coinage-metal clusters with excellent luminescence properties have attracted considerable interest due to their intriguing structures and potential applications. However, achieving strong near-infrared (NIR) luminescence in these clusters is highly challenging. Here, we have successfully synthesized the first LnIII/CuI bimetallic clusters, formulated as [LnCu54O6Cl3(2-MeO-PhC≡C)36] (ClO4)6 (Ln = Yb for YbCu54, Er for ErCu54, and Gd for GdCu54). Single crystal X-ray diffraction showed that the LnCu54 clusters have a three-layered core-shell structure, consisting of (LnO6)@Cu18Cl3@Cu36 units protected by 36 2-MeO-PhC≡C- ligands. Notably, the YbCu54 cluster exhibits significant NIR-II luminescence at 986 nm with the solid quantum efficiency of 33.3%, the highest among Cu clusters with NIR-II emission. This work not only reports the first category of LnIII/CuI clusters but also presents a method to enhance NIR luminescence in coinage-metal clusters through the incorporation of LnIII ions.

Distortion Engineering: A Strategy to Modulate Molecular Upconversion with Molecular Cluster-Aggregates

The rational engineering of molecules is a powerful chemistry tool of pivotal importance in the fields of molecular magnetism and luminescence. Hence, systems that can be modulated via molecular engineering and composition control are expected to present extra versatility regarding the tunability of their properties. This is the case with molecular cluster aggregates (MCAs), high nuclearity molecular compounds. Herein, we demonstrate how the union of both strategies, namely, composition control and molecular engineering, can be employed to enhance molecular upconversion in MCAs. This was achieved by doping a {Gd8Er2Yb10} MCA with CeIII ions. By replacement of the optically silent GdIII ions with CeIII, the upconversion mechanism is modified due to CeIII-mediated cross-relaxation. In addition to this effect, we could also engineer the degree of metal site distortion due to the larger size of CeIII ions, relaxing the selection rules and impacting the upconversion quantum yield and luminescent thermometry. Opto-structural correlations demonstrate that the presented molecular engineering strategy can be used to enhance the performance of molecular upconverters.

Rapid and reliable ratiometric fluorescence detection of isoquercitrin based on a high-nuclearity Zn(II)-Nd(III) nanomolecular sensor

Rapid and quantitative detection of isoquercitrin (Isq) has been attracting much attention due to its outstanding pharmacological and physiological activities. Herein, an interesting 48-metal Zn(II)-Nd(III) nanocluster (1, molecular sizes 1.3 × 2.8 × 3.1 nm) with salen-type Schiff base ligand was constructed as molecular sensor for the luminescence detection of Isq. 1 exhibits visible ligand-centered emission and NIR luminescence of Nd(III), and shows ratiometric fluorescence response to Isq with high sensitivity even in the presence of other interferences. The fluorescence sensing behavior can be expressed by a second-order equation I1060nm/I480nm = A*[Isq]2 + B*[Isq] + C, which is used to quantitatively analyze the Isq concentrations in DMF and FCS. The LODs to Isq for the ligand-centered and lanthanide emissions of 1 in DMF are 0.21 μM and 0.11 nM, respectively. The quenching of the ligand-centered emission of 1 caused by Isq is attributed to the competitive absorption of light energy and "inner effect", while, the luminescence enhancement is due to the "antenna effect".

Colorless Near-Infrared Absorbing Dyes Based on B-N Fused Donor-Acceptor-Donor π-Conjugated Molecules for Organic Phototransistors

The introduction of a colorless function to organic electronic devices allows responses to light in the near-infrared (NIR) region and is expected to broaden the applications of these devices. However, the development of a colorless NIR dye remains a challenge due to the lack of a rational molecular design for controlling electronic transitions. In this study, to suppress the π-π* transitions in the visible region, polycyclic donor-acceptor-donor π-conjugated molecules with boron bridges (Py-FNTz-B and IP-FNTz-B) are designed and synthesized, which contain pyrrole or indenopyrrole as donor units with fluorinated naphthobisthiadiazole (FNTz) as an acceptor unit. The pyrrole end-capped Py-FNTz-B shows an absorption band in the NIR region without distinct visible-light absorption, which has led to the establishment of colorless characteristics. The indenopyrrole end-capped IP-FNTz-B shows a narrow optical energy gap of 0.87 eV in films. Time-resolved microwave conductance and field-effect transistors demonstrate the semiconducting characteristics of these molecules, and Py-FNTz-B-based devices function as NIR phototransistors. Theoretical analyses indicate that the combination of a polyene-like electronic structure with orbital symmetry is important to obtain NIR wavelength-selective absorption. This study suggests that a molecular design based on electronic structures can be effective in the development of colorless NIR-absorbing dyes for organic electronics.

[Nd(NTA)2·H2O]3- complex with high-efficiency emission in NIR region

The distinctive photophysical characteristics possessed by lanthanides, including europium, neodymium, and ytterbium, render them adaptable molecular tools for studying biological systems. Specifically, their enduring photoluminescence, precise emission spectra, and significant Stokes shifts allow for experiments not achievable with organic fluorophores or fluorescent proteins. Moreover, the capacity of these metal ions for luminescence resonance energy transfer and photon upconversion extends the potential applications of lanthanide probes even further. In this research, a new [Nd(NTA)2·H2O]3- complex was synthesized and its optical properties were assessed using practical characterization techniques such as UV-Vis absorption, photoluminescence, and FTIR. It was discovered that when the sample was excited by a 357 nm wavelength, it emitted a strong line at 1076 nm with a full-width at half maximum (FWHM) of 10 nm, a phenomenon not previously documented. The Judd-Ofelt theory and its intensity parameters were utilized in a theoretical approach to determine the fluorescence branching ratio and the radiative lifetime of the [Nd(NTA)2·H2O]3- complex. The absorption and luminescence spectra were then analyzed accordingly. Experimental findings validated the potential applications of the prepared sample in bioimaging.

Methyl methacrylate-modified polystyrene microspheres: an effective strategy to enhance the fluorescence of Eu-complexes

The in vitro detection applications of europium complex-doped microspheres mainly rely on strong fluorescence intensity and a well-defined morphology. In this work, using methyl methacrylate-modified polystyrene microspheres has been proven an effective strategy to enhance the fluorescence and morphology of Eu-complexes. The experimental results showed that the modification resulted in the formation of a porous structure within the polystyrene microspheres, enhancing the doping uniformity and facilitating a more significant accumulation of fluorescent molecules. Furthermore, because of their encapsulation ability, microspheres efficiently confine the fluorescent molecules within them. In addition, the nano-scale porous structure endowed the microspheres with enhanced properties without compromising solvent swelling capability, thereby significantly boosting the fluorescence performance of porous PSMMA. In lateral flow immunoassays (LFIAs), PSMMA-Eu microspheres were effectively utilized to detect fentanyl with exceptional sensitivity by capitalizing on these benefits, capable of detecting concentrations as low as 0.10 ng mL-1. This technology has significant potential for rapid point-of-care screening and clinical applications.

Two Three-Dimensional LnIII Coordination Polymers Exhibiting Luminescent Sensing and a Magnetocaloric Effect

Two lanthanide 3D coordination polymers [Ln2(L)4Cl2(H2O)4]n (Ln = Eu (1), Gd (2)) with quinoline-2-carboxylic acid (HL) as the ligand were successfully synthesized and characterized. Complex 1 exhibits a highly sensitive and selective luminescent response to 2,6-dipicolinic acid (DPA) in tap water and is virtually unaffected by interferences such as amino acids, aromatic carboxylic acids, and ions. With the addition of DPA, the luminescence intensity of complex 1 decreases rapidly to the naked eye. The detection limit of 1 toward DPA is 3.36 μM, which is much less than the infectious dose (60 μM) of the anthrax spores, indicating the high sensitivity of 1 to DPA. This study offers a basis for employing lanthanide complexes in real sample analysis, enabling direct and efficient detection of DPA with high sensitivity and specificity. Additionally, it is noteworthy that at a magnetic field strength of 7 T and a temperature of 3 K, the maximum entropy change for complex 2 attains a value of 23.56 J kg-1 K-1.

Guest-Responsive Near-Infrared-Luminescent Metal-Organic Cage Organized by Porphyrin Dyes and Yb(III) Complexes

Metal-organic cages (MOCs) with luminophores have significant advantages for the facile detection of specific molecules based on turn-on or turn-off luminescence changes induced by host-guest complexation. One important challenge is the development of turn-on-type near-infrared (NIR)-luminescent MOCs. In this study, we synthesized a novel MOC consisting of two porphyrin dyes linked by four Yb(III) complexes, which exhibit bimodal red and NIR fluorescence signals upon photoexcitation of the porphyrin π system. Single-crystal X-ray structural analysis and computational molecular modeling revealed that planar aromatic perfluorocarbons were intercalated into the MOC. The tight packing between the MOC and guests enhanced the NIR fluorescence of Yb(III) by suppressing energy transfer from the photoexcited porphyrin to oxygen molecules. Guest-responsive turn-on NIR fluorescence changes in an MOC were successfully demonstrated.

A Dual-Mode Near-Infrared Optical and Photoacoustic Imaging Agent Based on a Low Energy Absorbing Ytterbium Complex

Near-infrared (NIR) luminescence and photoacoustic (PA) imaging have attracted increasing attention for the real-time monitoring of biological samples due to high sensitivity, resolution, and pronounced signal detection depth, respectively. For improved contrast, both techniques require imaging agents possessing high absorption in the red-NIR range. Herein, we took advantage of a ternary complex formed with the anionic ytterbium(III) tetrakis(2-thenoyltrifluoroacetonate) ([Yb(tta)4]-) and the cationic NIR-absorbing chromophore, 1,1'-diethyl-2,2'-dicarbocyanine (Cy+), to evaluate its potential to act as a dual-mode NIR luminescence and PA imaging agent. We demonstrated that, upon excitation with red-NIR light, Cy[Yb(tta)4] encapsulated into polystyrene nanoparticles is able to generate both NIR Yb3+ emission and a PA signal in an imaging experiment performed in a tissue-mimicking phantom.

Ratiometric Fluorescence Detection of Levofloxacin Based on a Cube-like Zn(II)-Eu(III) Nanocluster: Functionalized Sodium Alginate Film for the Detection in Serum and Medicine

A cube-like Zn(II)-Eu(III) nanocluster 1 (molecular sizes: 1.8 × 2.0 × 2.0 nm) was constructed by the use of a new long-chain Schiff base ligand. It shows a ratiometric fluorescence response to levofloxacin (LFX) with high sensitivity and selectivity, which can be expressed as I615 nm/I550 nm = A*[LFX]2 + B*[LFX] + C. It is used to quantitatively detect the LFX concentrations in fetal calf serum (FCS) and tablets sold in pharmacy. Filter paper strips bearing 1 can be used to qualitatively detect LFX by a color change to red under a UV lamp. 1 and its hybrid with sodium alginate (SA), 1@SA, display potential applications in the qualitative detection of LFX in FCS and the medicine. The limit of detection of 1 to LFX is as low as 2.1 × 10-2 nM.

Lanthanide complexes with an azo-dye chromophore ligand: syntheses, crystal structures, and near-infrared luminescence by long-wavelength excitation

Near-infrared (NIR) emissive probes are becoming increasingly popular in biological sensing and imaging due to the advantages of non-invasiveness and deep tissue-penetrating ability. Herein, a series of complexes of trivalent lanthanide ions (Ln = Yb, Er, and Gd) with the commercially available azo dye chromophore 2R (Na2H2C2R) as ligand and featuring respectively H2O and dimethylsulfoxide (DMSO) as ancillary ligands have been prepared. Formulated as [Ln2(HC2R)2(H2O)10]·8H2O (1-3, Ln = Yb, Er, Gd) and [Ln2(HC2R)2(DMSO)10]·2DMSO (4-6, Ln = Yb, Er, Gd), their structures have been determined by single-crystal X-ray diffraction studies. Photophysical property studies revealed NIR emissions of the DMSO complexes characteristic of Yb(III) and Er(III), effectively sensitized by the dye ligand arising mainly from the π-π* transition of the chromophore. The long-wavelength excitation of the complexes, covering the whole visible-light range and extending into the NIR region, portends the potential applications of such complexes for flexible bioimaging and sensing.

A 20-Metal Zn(II)-Cd(II)-Eu(III) Nanocluster with Qualitative and Quantitative Luminescence Detection of Meloxicam (an Anti-Inflammatory Drug)

Meloxicam (MLX) is a novel nonsteroidal anti-inflammatory drug, but on the other hand, it has become one of the common microcontaminants in surface waters and sewage. Herein, we report the preparation of a ternary-metal Zn(II)-Cd(II)-Eu(III) nanocluster 1 for the response of MLX through the enhancement of lanthanide luminescence. The luminescence sensing behavior of 1 is expressed by the equation I615nm = 3060 × [MLX] + 46,604, which can be used in the quantitative analysis of MLX concentrations in meloxicam dispersible tablets. Filter paper strips bearing 1 can be used to qualitatively detect MLX by a color change to red under a UV lamp. The luminescence response time is no more than five s, and the detection limit is as low as 2.31 × 10-2 nM.

Luminescent Ln3+-based silsesquioxanes with a β-diketonate antenna ligand: toward the design of efficient temperature sensors

We report the synthesis and single-crystal X-ray diffraction, magnetic, and luminescence measurements of a novel family of luminescent cage-like tetranuclear silsesquioxanes (PhSiO1.5)8(LnO1.5)4(O)(C5H8O2)6(EtOH)2(CH3CN)2⋅2CH3CN (where Ln = Tb, 1; Tb/Eu, 2; and Gd, 3), featuring seven-coordinated lanthanide ions arranged in a one-capped trigonal prism geometry. Compounds 1 and 2 exhibit characteristic Tb3+ and Tb3+/Eu3+-related emissions, respectively, sensitized by the chelating antenna acetylacetonate (acac) ligands upon excitation in the UV and visible spectral regions. Compound 3 is used to assess the energies of the triplet states of the acac ligand. For compound 1, theoretical calculations on the intramolecular energy transfer and multiphonon rates indicate a thermal balance between the 5D4 Stark components, while the mixed Tb3+/Eu3+ analog 2, with a Tb:Eu ratio of 3:1, showcases intra-cluster Tb3+-to-Eu3+ energy transfer, calculated theoretically as a function of temperature. By utilizing the intensity ratio between the 5D4→7F5 (Tb3+) and 5D0→7F2 (Eu3+) transitions in the range 11-373 K, we demonstrate the realization of a ratiometric luminescent thermometer with compound 2, operating in the range 11-373 K with a maximum relative sensitivity of 2.0% K-1 at 373 K. These findings highlight the potential of cage-like silsesquioxanes as versatile materials for optical sensing-enabled applications.

Five near-infrared-emissive graphene quantum dots for multiplex bioimaging

Due to high tissue penetration depth and low autofluorescence backgrounds, near-infrared (NIR) fluorescence imaging has recently become an advantageous diagnostic technique used in a variety of fields. However, most of the NIR fluorophores do not have therapeutic delivery capabilities, exhibit low photostabilities, and raise toxicity concerns. To address these issues, we developed and tested five types of biocompatible graphene quantum dots (GQDs) exhibiting spectrally-separated fluorescence in the NIR range of 928-1053 nm with NIR excitation. Their optical properties in the NIR are attributed to either rare-earth metal dopants (Ho-NGQDs, Yb-NGQDs, Nd-NGQDs) or defect-states (nitrogen doped GQDS (NGQDs), reduced graphene oxides) as verified by Hartree-Fock calculations. Moderate up to 1.34% quantum yields of these GQDs are well-compensated by their remarkable >4 h photostability. At the biocompatible concentrations of up to 0.5-2 mg ml-1 GQDs successfully internalize into HEK-293 cells and enable in vitro imaging in the visible and NIR. Tested all together in HEK-293 cells five GQD types enable simultaneous multiplex imaging in the NIR-I and NIR-II shown for the first time in this work for GQD platforms. Substantial photostability, spectrally-separated NIR emission, and high biocompatibility of five GQD types developed here suggest their promising potential in multianalyte testing and multiwavelength bioimaging of combination therapies.

Nanosized Prussian blue and its analogs for bioimaging and cancer theranostics

Prussian blue (PB) nanoparticles (NPs) and Prussian blue analogs (PBAs) can form metal-organic frameworks through the programmable coordination of ferrous ions with cyanide. PB and PBAs represent a burgeoning class of hybrid functional nano-systems with a wide-ranging application spectrum encompassing biomedicine, cancer diagnosis, and therapy. A comprehensive overview of recent advancements is crucial for gaining insights for future research. In this context, we reviewed the synthesis techniques and surface modification strategies employed to tailor the dimensions, morphology, and attributes of PB NPs. Subsequently, we explored advanced biomedical utilities of PB NPs, encompassing photoacoustic imaging, magnetic resonance imaging, ultrasound (US) imaging, and multimodal imaging. In particular, the application of PB NPs-mediated photothermal therapy, photodynamic therapy, and chemodynamic therapy to cancer treatment was reviewed. Based on the literature, we envision an evolving trajectory wherein the future of Prussian blue-driven biological applications converge into an integrated theranostic platform, seamlessly amalgamating bioimaging and cancer therapy. STATEMENT OF SIGNIFICANCE: Prussian blue, an FDA-approved coordinative pigment with a centuries-long legacy, has paved the way for Prussian blue nanoparticles (PB NPs), renowned for their remarkable biocompatibility and biosafety. These PB NPs have found their niche in biomedicine, playing crucial roles in both diagnostics and therapeutic applications. The comprehensive review goes beyond PB NP-based cancer therapy. Alongside in-depth coverage of PB NP synthesis and surface modifications, the review delves into their cutting-edge applications in the realm of biomedical imaging, encompassing techniques such as photoacoustic imaging, magnetic resonance imaging, ultrasound imaging, and multimodal imaging.

A terbium(III) complex-based time-resolved luminescent probe for selenocysteine as an inhibitor of selenoproteins

A terbium(III) complex-based time-resolved luminescence probe for selenocysteine can inhibit selenoprotein activity via a selenolate-triggered cleavage reaction of sulfonamide bonds in living cells.

Symmetry and Rigidity for Boosting Erbium-Based Molecular Light-Upconversion in Solution

Previously limited to highly symmetrical homoleptic triple-helical complexes [Er(Lk)3 ]3+ , where Lk are polyaromatic tridentate ligands, single-center molecular-based upconversion using linear optics and exploiting the excited-state absorption mechanism (ESA) greatly benefits from the design of stable and low-symmetrical [LkEr(hfa)3 ] heteroleptic adducts (hfa- =hexafluoroacetylacetonate anion). Depending on (i) the extended π-electron delocalization, (ii) the flexibility and (iii) the heavy atom effect brought by the bound ligand Lk, the near-infrared (801 nm) to visible green (542 nm) upconversion quantum yield measured for [LkEr(hfa)3 ] in solution at room temperature can be boosted by up to three orders of magnitude.

Two pairs of chiral YbIII enantiomers presenting distinct NIR luminescence and circularly polarized luminescence performances with giant differences in second-harmonic generation responses

By introducing enantiomerically pure mono-bidentate N-donor ligands (LR/LS) into Yb(btfa)3(H2O)2 and Yb(dbm)3(H2O), respectively, two pairs of chiral YbIII enantiomers, namely Yb(btfa)3LR/Yb(btfa)3LS (D-1/L-1) and [Yb(dbm)3LR]·[Yb(dbm)3(C2H5OH)]/[Yb(dbm)3LS]·[Yb(dbm)3(C2H5OH)] (D-2/L-2) were isolated, where btfa- = 3-benzoyl-1,1,1-trifluoroacetonate, dbm- = dibenzoylmethanate, and LR/LS = (-)/(+)-4,5-pinenepyridyl-2-pyrazine. D-1/L-1 possess mononuclear structures in which the YbIII ions are eight-coordinated, while D-2/L-2 show cocrystal structures containing Yb(dbm)3(LR/LS) and Yb(dbm)3(C2H5OH) moieties in which the two YbIII ions are eight and seven-coordinated, respectively. They not only feature different molecular structures but also present distinct linear and nonlinear optical performances. Chiral mononuclear D-1 has better near infrared photo-luminescence (NIR-PL) and circularly polarized luminescence (CPL) performances than chiral cocrystal D-2. More remarkably, D-1/L-1 show large second-harmonic generation (SHG) responses (up to 1.25/1.28 × KDP) 18/16 times those of D-2/L-2 (0.07/0.08 × KDP). In addition, D-2/L-2 represent the first examples of lanthanide cocrystal complexes with NIR-PL, NIR-CPL and SHG properties.

Recent advances on the construction of long-wavelength emissive supramolecular coordination complexes for photo-diagnosis and therapy

Recently, metal-based drugs have attracted relentless interest in the biomedical field. However, their short excitation/emission wavelengths and unsatisfactory therapeutic efficiency limit their biological applications in vivo. Currently, the second near-infrared window (NIR-II, 1000-1700 nm) provides more accurate imaging and therapeutic options. Thus, there has been a constant focus on developing multifunctional NIR metal agents for imaging and therapy that have deeper tissue penetration. Fortunately, supramolecular coordination complexes (SCCs) formed by the coordination-driven self-assembly of NIR-II emissive ligands can address the above issues. Importantly, metal receptors with chemotherapeutic properties in SCCs can bind to luminescent ligands, thus becoming a versatile therapeutic platform for chemotherapy, imaging and phototherapy. In this context, we systematically summarize the evolution of NIR-II emissive SCCs for biomedical applications and discuss future challenges and prospects.

Site-Selective Solvation-Induced Conformational Switching of Heteroleptic Heteronuclear Tb(III) and Y(III) Trisphthalocyaninates for the Control of Their Magnetic Anisotropy

In the present work, we report the synthesis of isomeric heteronuclear terbium(III) and yttrium(III) triple-decker phthalocyaninates [(BuO)8Pc]M[(BuO)8Pc]M*[(15C5)4Pc] (M = Tb, M* = Y or M = Y, M* = Tb, [(BuO)8Pc]2--octa-n-butoxyphthalocyaninato-ligand, [(15C5)4Pc]2--tetra-15-crown-5-phthalocyaninato-ligand). We show that these complexes undergo solvation-induced switching: the conformers in which both metal centers are in square-antiprismatic environments are stabilized in toluene, whereas in dichloromethane, the metal centers M and M* are in distorted prismatic and antiprismatic environments, respectively. This conclusion follows from the detailed analysis of lanthanide-induced shifts in 1H NMR spectra, which makes it possible to extract the axial component of the magnetic susceptibility tensor χaxTb and to show that this term is particularly sensitive to conformational switching when terbium(III) ion is placed in the switchable "M" site. This result provides a new tool for controlling the magnetic properties of lanthanide complexes with phthalocyanine ligands.

Two Chiral YbIII Enantiomeric Pairs with Distinct Enantiomerically Pure N-Donor Ligands Presenting Significant Differences in Photoluminescence, Circularly Polarized Luminescence, and Second-Harmonic Generation

Using enantiomerically pure bidentate and tridentate N-donor ligands (¹L_R/¹L_S and ²L_R/²L_S) to replace two coordinated H₂O molecules of Yb(tta)₃(H₂O)₂, respectively, two eight- and nine-coordinated Yb^III enantiomeric pairs, namely, Yb(tta)₃¹L_R/Yb(tta)₃¹L_S (Yb-R-1/Yb-S-1) and [Yb(tta)₃²L_R]·CH₃CN/[Yb(tta)₃²L_S]·CH₃CN (Yb-R-2/Yb-S-2), were isolated, in which Htta = 2-thenoyltrifluoroacetone, ¹L_R/¹L_S = (-)/(+)-4,5-pinene-2,2'-bipyridine, and ²L_R/²L_S = (-)/(+)-2,6-bis(4',5'-pinene-2'-pyridyl)pyridine. Interestingly, they not only present distinct degrees of chirality but also show large differences in near-infrared (NIR) photoluminescence (PL), circularly polarized luminescence (CPL), and second-harmonic generation (SHG). Eight-coordinated Yb-R-1 with an asymmetric bidentate ¹L_R ligand has a high NIR-PL quantum yield (1.26%) and a long decay lifetime (20 μs) at room temperature, being more than two times those (0.48%, 8 μs) of nine-coordinated Yb-R-2 with a C₂-symmetric tridentate ²L_R ligand. In addition, Yb-R-1 displays an efficient CPL with a luminescence dissymmetry factor g_lum = 0.077, being 4 × Yb-R-2 (0.018). In particular, Yb-R-1 presents a strong SHG response (0.8 × KDP), which is 8 × Yb-R-2 (0.1 × KDP). More remarkably, the precursor Yb(tta)₃(H₂O)₂ exhibits a strong third-harmonic generation (THG) response (41 × α-SiO₂), while the introduction of chiral N-donors results in the switching of THG to SHG. Our interesting findings provide new insights into both the functional regulation and switching in multifunctional lanthanide molecular materials.

Ln(III) Complexes Embedded in Biocompatible PLGA Nanoparticles as Potential Vis-to-NIR Optical Probes

In this contribution, we present the spectroscopic study of two NIR emitting hydrophobic heteroleptic (R,R)-YbL1(tta) and (R,R)-NdL1(tta) complexes (with tta = 2-thenoyltrifluoroacetonate and L1 = N,N'-bis(2-(8-hydroxyquinolinate)methylidene)-1,2-(R,R or S,S)-cyclohexanediamine), both in methanol solution and embedded in water dispersible and biocompatible poly lactic-co-glycolic acid (PLGA) nanoparticles. Thanks to their absorption properties in a wide range of wavelengths extending from the UV up to the blue and green visible regions, the emission of these complexes can be effectively sensitized using visible radiation, which is much less harmful to tissues and skin than the UV one. The encapsulation of the two Ln(III)-based complexes in PLGA allows us to preserve their nature, making them stable in water and to test their cytotoxicity on two different cell lines, with the aim of using them in the future as potential bioimaging optical probes.

Excited-state intramolecular proton transfer (ESIPT)-based fluorescent probes for biomarker detection: design, mechanism, and application

Biomarkers are essential in biology, physiology, and pharmacology; thus, their detection is of extensive importance. Fluorescent probes provide effective tools for detecting biomarkers exactly. Excited state intramolecular proton transfer (ESIPT), one of the significant photophysical processes that possesses specific photoisomerization between Keto and Enol forms, can effectively avoid annoying interference from the background with a large Stokes shift. Hence, ESIPT is an excellent choice for biomarker monitoring. Based on the ESIPT process, abundant probes were designed and synthesized using three major design methods. In this review, we conclude probes for 14 kinds of biomarkers based on ESIPT explored in the past five years, summarize these general design methods, and highlight their application for biomarker detection in vitro or in vivo.

Construction of a Near-IR-Luminescent Rectangular Yb(III) Complex from a Dodecadentate Schiff Base Ligand for the Excitation-Wavelength-Dependent Detection of Aloe Emodin (a Natural Medicinal Ingredient)

A near-IR-luminescent octanuclear Yb(III) complex 1 was constructed from a new dodecadentate Schiff base ligand, which is used in the rapid and reliable wavelength-dependent detection of aloe emodin (AE) with high sensitivity even in the presence of other interferences.

Multifunctional Helicene-Based Ytterbium Coordination Polymer Displaying Circularly Polarized Luminescence, Slow Magnetic Relaxation and Room Temperature Magneto-Chiral Dichroism

The combination of physical properties sensitive to molecular chirality in a single system allows the observation of fascinating phenomena such as magneto-chiral dichroism (MChD) and circularly polarized luminescence (CPL) having potential applications for optical data readout and display technology. Homochiral monodimensional coordination polymers of YbIII were designed from a 2,15-bis-ethynyl-hexahelicenic scaffold decorated with two terminal 4-pyridyl units. Thanks to the coordination of the chiral organic chromophore to Yb(hfac)3 units (hfac- =1,1,1,5,5,5-hexafluoroacetylaconate), efficient NIR-CPL activity is observed. Moreover, the specific crystal field around the YbIII induces a strong magnetic anisotropy which leads to a single-molecule magnet (SMM) behaviour and a remarkable room temperature MChD. The MChD-structural correlation is supported by computational investigations.

Construction of a Near-Infrared Luminescent 48-Metal Rectangular Zn(II)-Yb(III) Nanocluster with Carbonate Templates for the Dual-Emissive Detection of Rutin as a Medicinal Ingredient

An interesting 48-metal Zn(II)-Yb(III) nanocluster (1) with a size of about 1.3 × 2.8 × 3.1 nm was constructed by carbonate templates from a Schiff base ligand. It exhibits ligand-centered emission and near-infrared (NIR) luminescence of Yb(III), which are used in the dual-emissive detection of rutin (Rut) with high sensitivity even in the presence of other interferences. The response behavior can be expressed by the second-order equation I_980 nm/I_510 nm = A*[Rut]² + B*[Rut] + C, and the limits of detection to Rut for the emissions of 1 are 2.23 μM and 0.20 nM.

Luminescent Properties of Phosphonate Ester-Supported Neodymium(III) Nitrate and Chloride Complexes

This study examines the synthesis of two geminal bisphosphonate ester-supported Ln³⁺ complexes [Ln(L3)₂(NO₃)₃] (Ln = Nd³⁺ (5), La³⁺ (6)) and optical properties of the neodymium(III) complex. These results are compared to known mono-phosphonate ester-based Nd³⁺ complexes [Nd(L1/L2)₃X₃]_n (X = NO₃^-, n = 1; Cl^-, n = 2) (1-4). The optical properties of Nd³⁺ compounds are determined by micro-photoluminescence (µ-PL) spectroscopy which reveals three characteristic metal-centered emission bands in the NIR region related to transitions from ⁴F_3/2 excited state. Additionally, two emission bands from ⁴F_5/2, ²H_9/2 → ⁴I_J (J = 11/2, 13/2) transitions were observed. PL spectroscopy of equimolar complex solutions in dry dichloromethane (DCM) revealed remarkably higher emission intensity of the mono-phosphonate ester-based complexes in comparison to their bisphosphonate ester congener. The temperature-dependent PL measurements enable assignment of the emission lines of the ⁴F_3/2 → ⁴I_9/2 transition. Furthermore, low-temperature polarization-dependent measurements of the transitions from R₁ and R₂ Stark sublevel of ⁴F_3/2 state to the ⁴I_9/2 state for crystals of [Nd(L3)₂(NO₃)₃] (5) are discussed.

Thermosensitive visible-light-excited visible-/NIR-luminescent complexes with lanthanide sensitized by the π-electronic system through intramolecular H-bonding

Visible-luminescent lanthanide (LnL) complexes with a highly planar tetradentate ligand were successfully developed for a visible-light solid-state excitation system. L was designed by using two 2-hydroxy-3-(2-pyridinyl)-benzaldehyde molecules bridged by ethylenediamine, which was then coordinated to a series of Ln ions (Ln = Nd, Sm, Eu, Gd, Tb, Dy, and Yb). From the measurement of single-crystal X-ray analysis of EuL, two phenolic O atoms and two imine N atoms in L were coordinated to the Eu ion, and each π-electronic system took coplanar with the edged-pyridine moiety through an intramolecular hydrogen bond. The enol group on the phenolic skeleton changed to the keto form, and the pyridine was protonated. Thus, intramolecular proton transfer occurred in L after the complexation. Other complexes take isostructure. The space group is P-1, and the c-axis shrinks with decreasing temperature without a phase transition in EuL. The yellow color caused by the planar structure of L can sensitize ff emission by visible light, and the luminescence color of each complex depends on central Ln ions. Furthermore, a phosphorescence band also appeared at rt with ff emission in LnL. Drastic temperature dependence of luminescence was clarified quantitatively.

Switchable Nanozyme Activity of Porphyrins Intercalated in Layered Gadolinium Hydroxide

In this study, organo-inorganic nanohybrids LHGd-MTSPP with enzyme-like activity were prepared by in situ intercalation of anionic 5,10,15,20-tetrakis-(4-sulfonatophenyl)porphyrin and its complexes with Zn(II) and Pd(II) (MTSPP, M = 2H, Zn(II) and Pd(II)) into gadolinium layered hydroxide (LHGd). The combination of powder XRD, CHNS analysis, FT-IR, EDX, and TG confirmed the layered structure of the reaction products. The basal interplanar distances in LHGd-MTSPP samples were 22.3-22.6 Å, corresponding to the size of an intercalated tetrapyrrole molecule. According to SEM data, LHGd-MTSPP hybrids consisted of individual lamellar nanoparticles 20-50 nm in thickness. The enzyme-like activity of individual constituents, LHGd-Cl and sulfoporphyrins TSPP, ZnTSPP and PdTSPP, and hybrid LHGd-MTSPP materials, was studied by chemiluminescence analysis using the ABAP/luminol system in phosphate buffer solution. All the individual porphyrins exhibited dose-dependent antioxidant properties with respect to alkylperoxyl radicals at pH 7.4. The intercalation of free base TSPP porphyrin into the LHGd preserved the radical scavenging properties of the product. Conversely, in LHGd-MTSPP samples containing Zn(II) and Pd(II) complexes, the antioxidant properties of the porphyrins changed to dose-dependent prooxidant activity. Thus, an efficient approach to the design and synthesis of advanced LHGd-MTSPP materials with switchable enzyme-like activity was developed.

Structure Determination of Binuclear Triple-Decker Phthalocyaninato Complexes by NMR via Paramagnetic Shifts Analysis Using Symmetry Peculiarities

The detailed knowledge about the structure of multinuclear paramagnetic lanthanide complexes for the targeted design of these compounds with special magnetic, sensory, optical and electronic properties is a very important task. At the same time, establishing the structure of such multinuclear paramagnetic lanthanide complexes in solution, using NMR is a difficult task, since several paramagnetic centers act simultaneously on the resulting chemical shift of a particular nucleus. In this paper, we have demonstrated the possibility of molecular structure determination in solution on the example of binuclear triple-decker lanthanide(III) complexes with tetra-15-crown-5-phthalocyanine Ln₂[(15C5)₄Pc]₃ {where Ln = Tb (1) and Dy (2)} by quantitative analysis of the pseudo-contact lanthanide-induced shifts (LIS). The symmetry of complexes was used for the simplification of the calculation of pseudo-contact shifts on the base of the expression for the magnetic susceptibility tensor in the arbitrary oriented magnetic axis system. Good agreement between the calculated and experimental shifts in the ¹H NMR spectra indicates the similarity of the structure for the complexes 1 and 2 in solution of CDCl₃ and the structure in the crystalline phase, found from the data of the X-ray structural study of the similar complex Lu₂[(15C5)₄Pc]₃. The described approach can be useful for LIS analysis of other polynuclear symmetric lanthanide complexes.