Chalcogen-bond driven molecular recognition at work

Neighboring Effects of Sulfur Oxidation State on Dynamic Covalent Bonds and Assemblies

The impact of a varied sulfur oxidation state (sulfide, sulfoxide, and sulfone) on imine dynamic covalent chemistry is presented. The role of noncovalent interactions, including chalcogen bonds and CH hydrogen bonds, on aldehyde/imine structures and imine exchange reactions was elucidated through experimental and computational evidence. The change in the sulfur oxidation state and diamine linkage further allowed the regulation of imine macrocycles, providing a platform for controlling molecular assemblies.

Chalcogen- and Halogen-Bond-Donating Cyanoborohydrides Provide Imine Hydrogenation

Sulfonium, selenonium, telluronium, and iodonium cyanoborohydrides have been synthesized, isolated, and fully characterized by various methods, including single-crystal X-ray diffraction (XRD) analysis. The quantum theory of atoms in molecules' analysis based on the XRD data indicated that the hydride···σ-hole short contacts observed in the crystal structures of each compound have a purely noncovalent nature. The telluronium and iodonium cyanoborohydrides provide a significantly higher rate of the model reaction of imine hydrogenation compared with sodium and tetrabutylammonium cyanoborohydrides. Based on the NMR and high-resolution electrospray ionization mass spectrometry data indicating that the reaction progress is accompanied by the cation reduction, a mechanism involving intermediate formation of elusive onium hydrides has been proposed as an alternative to conventional electrophilic activation of the imine moiety by its ligation to the cation's σ-hole.

The Missing Chalcogen Bonding Donor: Strongly Polarized Oxygen of Water

A biscyclen molecular cabin, synthesized by connecting two cyclen macrocycles with four linkages, entraps a Li+···H2O···Li+ trimer with a water molecule clamped by two Li+ ions. This configuration results in strongly polarized water, characterized by a water proton resonance shift of up to 10.00 ppm. The arrangement facilitates unprecedented O-centered chalcogen bonds between the lone pairs of pyridinyl nitrogen atoms and polarized water oxygen, as confirmed by X-ray crystallography, NMR spectroscopy, and theoretical calculations. Further observation of O-centered chalcogen bonding in a H2O·(LiCl)2 cluster suggests its widespread presence in hydrated salt systems.

Affinity of Telluronium Chalcogen Bond Donors for Lewis Bases in Solution: A Critical Experimental-Theoretical Joint Study

Telluronium salts [Ar2 MeTe]X were synthesized, and their Lewis acidic properties towards a number of Lewis bases were addressed in solution by physical and theoretical means. Structural X-ray diffraction analysis of 21 different salts revealed the electrophilicity of the Te centers in their interactions with anions. Telluroniums' propensity to form Lewis pairs was investigated with OPPh3 . Diffusion-ordered NMR spectroscopy suggested that telluroniums can bind up to three OPPh3 molecules. Isotherm titration calorimetry showed that the related heats of association in 1,2-dichloroethane depend on the electronic properties of the substituents of the aryl moiety and on the nature of the counterion. The enthalpies of first association of OPPh3 span -0.5 to -5 kcal mol-1 . Study of the affinity of telluroniums for OPPh3 by state-of-the-art DFT and ab-initio methods revealed the dominant Coulombic and dispersion interactions as well as an entropic effect favoring association in solution. Intermolecular orbital interactions between [Ar2 MeTe]+ cations and OPPh3 are deemed insufficient on their own to ensure the cohesion of [Ar2 MeTe ⋅ Bn ]+ complexes in solution (B=Lewis base). Comparison of Grimme's and Tkatchenko's DFT-D4/MBD-vdW thermodynamics of formation of higher [Ar2 MeTe ⋅ Bn ]+ complexes revealed significant molecular size-dependent divergence of the two methodologies, with MBD yielding better agreement with experiment.

Carbon-based Biradicals: Structural and Magnetic Switching

Sterically hindered C═C double bonds often deform into a bent or twisted geometry. Thus, many overcrowded ethylenes or anthraquinodimethanes can adopt multiple conformations, such as a folded form or a twisted form, which are interconvertible under the application of external stimuli. A perpendicular form with biradical character can also be adopted when designed to incorporate a stable carbon-based radical unit, which is involved in stimuli-responsive magnetic switching accompanied by a structural change. This review focuses on recent advances in the development of such strained π-electron systems and reveals the factors that affect the mutual interconversion and switching behavior. The energy barrier for the interconversion of conformational isomers is affected by the tricyclic skeleton or bulky substituents on the C═C double bonds, whereas the relative stability of the perpendicular biradical form increases with the additional insertion of 9,10-anthrylene units into the C═C double bonds.

Electrocatalytic hydrogen evolution mediated by an organotelluroxane macrocycle stabilized through secondary interactions

A discrete liphophilic organotelluroxane macrocycle has been found to catalyse the hydrogen evolution reaction (HER) by proton reduction efficiently. The macrocycle is synthesized via chloride abstraction from bis(p-methoxyphenyl) tellurium dichloride (p-MeOC6H5)2TeCl2 (1) by silver salts AgMX4 (MX4 = BF4-, and ClO4-) resulting in in situ generated di-cationic tetraorganoditelluroxane units; two such units are held together by two weak anions μ2-MX4, bridging to form 12-membered di-cationic macrocycles [((p-MeO-C6H4)2Te)2(μ-O)(μ2-F2BF2)2]2+ (2) and [((p-MeO-C6H4)2Te)2(μ-O)(μ2-O2ClO2)2]2+ (3) stabilized via Te-(μ2-BF4/ClO4), with secondary interactions. The charge is balanced by the presence of two more anions, one above and another below the plane of the macrocycle. Similar reaction at higher temperatures leads to the formation of telluronium salts R3TeX [X = BF4- (4), ClO4- (5)] as a major product. The BF4- anion containing macrocycle and telluronium salt were monitored using 19F NMR. HRMS confirmed the structural stability of all the compounds in the solution state. The organotelluroxane macrocycle 2 has been found to act as an efficient electrocatalyst for proton reduction in an organic medium in the presence of p-toluene sulfonic acid as a protic source.

Computational Insight into the Nature and Strength of the π-Hole Type Chalcogen∙∙∙Chalcogen Interactions in the XO2∙∙∙CH3YCH3 Complexes (X = S, Se, Te; Y = O, S, Se, Te)

In recent years, the non-covalent interactions between chalcogen centers have aroused substantial research interest because of their potential applications in organocatalysis, materials science, drug design, biological systems, crystal engineering, and molecular recognition. However, studies on π-hole-type chalcogen∙∙∙chalcogen interactions are scarcely reported in the literature. Herein, the π-hole-type intermolecular chalcogen∙∙∙chalcogen interactions in the model complexes formed between XO2 (X = S, Se, Te) and CH3YCH3 (Y = O, S, Se, Te) were systematically studied by using quantum chemical computations. The model complexes are stabilized via one primary X∙∙∙Y chalcogen bond (ChB) and the secondary C-H∙∙∙O hydrogen bonds. The binding energies of the studied complexes are in the range of -21.6~-60.4 kJ/mol. The X∙∙∙Y distances are significantly smaller than the sum of the van der Waals radii of the corresponding two atoms. The X∙∙∙Y ChBs in all the studied complexes except for the SO2∙∙∙CH3OCH3 complex are strong in strength and display a partial covalent character revealed by conducting the quantum theory of atoms in molecules (QTAIM), a non-covalent interaction plot (NCIplot), and natural bond orbital (NBO) analyses. The symmetry-adapted perturbation theory (SAPT) analysis discloses that the X∙∙∙Y ChBs are primarily dominated by the electrostatic component.

Selection of isomerization pathways of multistep photoswitches by chalcogen bonding

Multistep photoswitches are able to engage in different photoisomerization pathways and are challenging to control. Here we demonstrate a multistep sequence of E/Z isomerization and photocyclization/cycloreversion of photoswitches via manipulating the strength and mechanism of noncovalent chalcogen bonding interactions. The incorporation of chalcogens and the formyl group on open ethene bridged dithienylethenes offers a versatile skeleton for single photochromic molecules. While bidirectional E/Z photoswitching is dominated by neutral tellurium arising from enhanced resonance-assisted chalcogen bonding, the creation of cationic telluronium enables the realization of photocyclization/cycloreversion. The reversible nucleophilic substitution reactions further allow interconversion between neutral tellurium and cationic telluronium and selection of photoisomerization mechanisms on purpose. By leveraging unique photoswitching patterns and dynamic covalent reactivity, light and pH stimuli-responsive multistate rewritable materials were constructed, triggered by an activating reagent for additional control. The results should provide ample opportunities to molecular recognition, intelligent switches, information encryption, and smart materials.

Halide Complexes of 5,6-Dicyano-2,1,3-Benzoselenadiazole with 1 : 4 Stoichiometry: Cooperativity between Chalcogen and Hydrogen Bonding

The [M4 -Hal]- (M=the title compound; Hal=Cl, Br, and I) complexes were isolated in the form of salts of [Et4 N]+ cation and characterized by XRD, NMR, UV-Vis, DFT, QTAIM, EDD, and EDA. Their stoichiometry is caused by a cooperative interplay of σ-hole-driven chalcogen (ChB) and hydrogen (HB) bondings. In the crystal, [M4 -Hal]- are connected by the π-hole-driven ChB; overall, each [Hal]- is six-coordinated. In the ChB, the electrostatic interaction dominates over orbital and dispersion interactions. In UV-Vis spectra of the M+[Hal]- solutions, ChB-typical and [Hal]- -dependent charge-transfer bands are present; they reflect orbital interactions and allow identification of the individual [Hal]- . However, the structural situation in the solutions is not entirely clear. Particularly, the UV-Vis spectra of the solutions are different from the solid-state spectra of the [Et4 N]+ [M4 -Hal]- ; very tentatively, species in the solutions are assigned [M-Hal]- . It is supposed that the formation of the [M4 -Hal]- proceeds during the crystallization of the [Et4 N]+ [M4 -Hal]- . Overall, M can be considered as a chromogenic receptor and prototype sensor of [Hal]- . The findings are also useful for crystal engineering and supramolecular chemistry.

Gold(III) derivatives as the noncovalent interaction donors: theoretical study of the π-hole regium bonds

Except for the well-known σ-hole regium bonds formed by metal nanoparticles and M(I) (M = Cu, Ag, and Au) derivatives, the existence of π-hole regions located above and below the Au atom in gold(III) derivatives suggests that gold(III) also functions as an efficient electrophilic site. In this study, a comprehensive analysis was conducted on the electrophilicity of trichloro-(p-toluonitrilo-N)-gold(III) derivatives AuL3(NCC6H4X) (L = Cl, Br, CN; X = NH2, CH3, CF3, NC, and CN) and the nature of π-hole regium bonds in the AuL3(NCC6H4X)⋯LB (LB = NH3, N(NH3)3, CH2O, C2H2, C2H4, C6H6) and (AuCl3(NCC6H4Y))n (Y = Cl, CN, NC, NO2; n = 2, 3)) complexes. The characteristics of the π-hole regium bonds were studied with respect to the influence of ligands and substituents, the strength of intermolecular interactions between Au(III) derivatives and Lewis bases, and those in the polymers. In the case of the AuL3(NCC6H4X)⋯NH3 complexes, the strength of the regium bonds increases gradually in the order of L = Cl < Br < CN and X = NH2 < CH3 < CF3 ≈ NC < CN. The ligands (L) attached to the Au atom exert a significant effect on the strength of the π-hole regium bonds in comparison to the substituents (X) on the benzene ring. The regium bonds are primarily dominated by electrostatic interaction, accompanied by moderate contribution from polarization. Linear relationships were identified between the electrostatic energies and the local most positive potentials over the Au atom, as well as between the polarization energies and the amount of charge transfer. Most of the π-hole regium bonds in the AuL3(NCC6H4X)⋯LB complexes exhibit the characters of closed shell noncovalent interactions. In the polymers (AuCl3(NCC6H4Y))n, weak face-to-face π-π stacking interactions are also present, in addition to regium bonds. The trimers displayed a slightly negative cooperativity in comparison to the dimers.

Supramolecular catalysis with ethers enabled by dual chalcogen bonding activation

The activation of ethers by weak interactions is a long-standing objective in supramolecular catalysis, but yet it remains an underdeveloped topic. The obstacles towards solving this problem are prominent since it is difficult for a weak interaction to cleave a relatively strong C-O σ-bond and moreover, the ionic intermediate composing of an alkoxide ion and an electrophilic carbocation would deactivate weak interaction donors. Herein, we describe a distinctive activation mode, dual Se···π and Se···O bonding, that could activate benzylic as well as allylic ether C-O σ-bonds to achieve cyclization, coupling and elimination reactions. This dual Se···π and Se···O bonding catalysis approach could tolerate various alkoxide leaving groups, while the other representative weak interaction donors showed no catalytic activity.

Chalcogen Bonding Catalysis: Tellurium, the Last Frontier?

Chalcogen bonding (ChB) is the non-covalent interaction occurring between chalcogen atoms as Lewis acid sites and atoms or groups of atoms able to behave as Lewis bases through their lone pair or π electrons. Analogously to its sister halogen bonding, the high directionality of this interaction was implemented for precise structural organizations in the solid state and in solution. Regarding catalysis, ChB is now accepted as a new mode of activation as demonstrated by the increased number of examples in the last five years. In the family of ChB catalysts, those based on tellurium rapidly appeared to overcome their lighter sulfur and selenium counterparts. In this review, we highlight the Lewis acid properties of tellurium-based derivatives in solution and summarize the start-of-the-art of their applications in catalysis.

Fluorogenic In Situ Thioacetalization: Expanding the Chemical Space of Fluorescent Probes, Including Unorthodox, Bifurcated, and Mechanosensitive Chalcogen Bonds

Progress with fluorescent flippers, small-molecule probes to image membrane tension in living systems, has been limited by the effort needed to synthesize the twisted push-pull mechanophore. Here, we move to a higher oxidation level to introduce a new design paradigm that allows the screening of flipper probes rapidly, at best in situ. Late-stage clicking of thioacetals and acetals allows simultaneous attachment of targeting units and interfacers and exploration of the critical chalcogen-bonding donor at the same time. Initial studies focus on plasma membrane targeting and develop the chemical space of acetals and thioacetals, from acyclic amino acids to cyclic 1,3-heterocycles covering dioxanes as well as dithiolanes, dithianes, and dithiepanes, derived also from classics in biology like cysteine, lipoic acid, asparagusic acid, DTT, and epidithiodiketopiperazines. From the functional point of view, the sensitivity of membrane tension imaging in living cells could be doubled, with lifetime differences in FLIM images increasing from 0.55 to 1.11 ns. From a theoretical point of view, the complexity of mechanically coupled chalcogen bonding is explored, revealing, among others, intriguing bifurcated chalcogen bonds.

Chalcogen bonding in copper(II)-mediated synthesis

The chalcogen bond (ChB) is a noncovalent attraction between an electrophilic chalcogen atom and a nucleophilic (Nu) region in the same (intramolecular) or another (intermolecular) molecular entity: R-Ch⋯Nu (Ch = O, S, Se or Te; R = substituents; Nu = nucleophile). ChB is comparable to the hydrogen and halogen bonds both in terms of strengths and directionality. However, in contrast to the monovalent halogen atoms, usually the divalent or tetravalent chalcogen atoms are able to display more than one electrophilic centre (on account of the existence of two or three species bonded to the chalcogen atom), which provides an additional opportunity in the use of this type of noncovalent binding in synthetic operations. In this work, the role of ChB at the secondary coordination sphere of metal complexes through copper(II)-mediated activation of dioxygen or of one nitrile group of a 1,2,5-selenadiazole-3,4-dicarbonitrile ligand to form a carbimidate or an imino-carboxylic acid is demonstrated. DFT calculations allowed evaluation of the strength of the ChBs and proved their relevant structure directing role in the solid state architectures. The effect of metal-coordination on the σ-hole opposite to the coordinated SeO bond has been analysed using molecular electrostatic potential (MEP) surfaces and explains the greater ability of the coordinated selenoxide derivatives to form strong ChBs.

Evidence for and evaluation of fluorine-tellurium chalcogen bonding

In the field of noncovalent interactions, chalcogen bonding (ChB) involving the tellurium atom is currently attracting much attention in supramolecular chemistry and in catalysis. However, as a prerequisite for its application, the ChB should be studied in solution to assess its formation and, if possible, to evaluate its strength. In this context, new tellurium derivatives bearing CH2F and CF3 groups were designed to exhibit Te⋯F ChB and were synthesized in good to high yields. In both types of compounds, Te⋯F interactions were characterized in solution by combining 19F, 125Te and HOESY NMR techniques. These Te⋯F ChBs were shown to contribute to the overall JTe-F coupling constants (94-170 Hz) measured in the CH2F- and CF3-based tellurium derivatives. Finally, a variable temperature NMR study allowed us to approximate the energy of the Te⋯F ChB, from 3 kJ mol-1 for the compounds with weak Te σ-holes to 11 kJ mol-1 for Te σ-holes activated by the presence of strong electron withdrawing substituents.

Macrocyclic chemosensors with anthraquinone signaling unit built into ionophore. Experimental and computational studies (part I) - synthesis and effect of proton binding on spectrophotometric and electrochemical properties

Two macrocyclic chemosensors with anthraquinone signaling unit incorporated into ionophore system (via positions 1 and 8) have been synthesized and subsequently their physicochemical properties became the subject of our extensive research. First ligand, labeled in the paper as AQ-Ncrown is characterized by a cyclic structure of a crown ether, while second one AQ-Ncrypt includes an additional ethoxy bridge, which ensures the bicyclic character of a cryptand. The studied macrocycles possess both oxygen and nitrogen heteroatoms in the ionophore cavity. Dualistic (chromophore and electrophore) signaling nature of described compounds, makes them potentially attractive molecular recognition systems. The aim of our research was to synthesize and analyze the spectroscopic, acid-base and redox properties of aforesaid macrocycles. Furthermore, we have combined experimental approach together with theoretical investigations. The equilibrium structures of AQ-Ncrown and AQ-Ncrypt were determined with the use of DFT calculations. The sensitivity of studied macrocycles towards interactions with protons was scrutinized. The complete pH-spectrophotometric characteristic of studied ligands together with their protolytic forms and corresponding pK_a values were determined. The influence of medium (aprotic and protic solvent) on spectral effects was described. Furthermore, the molecular electrostatic potential maps for ligands and differential electron densities for their mono and dianions were calculated. The redox reactions was investigated at different pHs by cyclic voltammetry. Electrochemical results have presented intriguing phenomenon: the specific stabilization of the reduced form of the protonated molecules. The calculations have revealed that this is a consequence of barrierless intramolecular proton transfer (from the macrocycle cavity onto the anthraquinone moiety) that might occur during the reduction process in acidic medium.

Strategies for the Design of PEDOT Analogues Unraveled: the Use of Chalcogen Bonds and σ-Holes

In this theoretical study, we set out to demonstrate the substitution effect of PEDOT analogues on planarity as an intrinsic indicator for electronic performance. We perform a quantum mechanical (DFT) study of PEDOT and analogous model systems and demonstrate the usefulness of the ωB97X-V functional to simulate chalcogen bonds and other noncovalent interactions. We confirm that the chalcogen bond stabilizes the planar conformation and further visualize its presence via the electrostatic potential surface. In comparison to the prevalent B3LYP, we gain 4-fold savings in computational time and simulate model systems of up to a dodecamer. Implications for design of conductive polymers can be drawn from the results, and an example for self-doped polymers is presented where modulation of the strength of the chalcogen bond plays a significant role.

A Structural Approach to the Strength Evaluation of Linear Chalcogen Bonds

The experimental structural features of chalcogen bonding (ChB) interactions in over 34,000 linear fragments R–Ch⋯A (Ch = S, Se, Te; R = C, N, O, S, Se, Te; A = N, O, S, Se, Te, F, Cl, Br, I) were analyzed. The bond distances dR–Ch and the interaction distances dCh⋯A were investigated, and the functions δR–Ch and δCh⋯A were introduced to compare the structural data of R–Ch⋯A fragments involving different Ch atoms. The functions δR−Ch and δCh⋯A were calculated by normalizing the differences between the relevant bond dR–Ch and ChB interaction dCh⋯A distances with respect to the sum of the relevant covalent (rcovR + rcovCh) and the van der Waals (vdW) radii (rvdWCh + rvdWA), respectively. A systematic comparison is presented, highlighting the role of the chalcogen involved, the role of the R atoms covalently bonded to the Ch, and the role of the A species playing the role of chalcogen bond acceptor. Based on the results obtained, an innovative approach is proposed for the evaluation and categorization of the ChB strength based on structural data.

Chalcogen-Bond Catalysis: Telluronium-Catalyzed [4+2]-Cyclocondensation of (in situ Generated) Aryl Imines with Alkenes

In the chalcogen series, tellurium species exhibit the strongest chalcogen bonding (ChB) interaction with electron-rich atom. This property explains the renewed interested toward tellurium-based derivatives and their use in different applications, such as organocatalysis. In this context, the catalytic activity of telluronium salts in the Povarov reaction is presented herein. Different dienophiles, as well as imines of variable electronic nature, efficiently react in the presence of catalytic amount of either diarylmethyltelluronium or triaryltelluronium salts. Both catalysts could also readily perform the three-component Povarov reaction starting from aldehyde, aniline and dihydrofuran. The reactivity of telluroniums towards imines and aldehydes was confirmed in the solid state by the ability of Te atom to interact through ChB with the oxygen carbonyl of acetone, and in solution with significant shift variations of the imine proton and of the tellurium atom in ¹ H and ¹²⁵ Te NMR spectroscopy. For the most active telluronium catalysts bearing CF₃ groups, association constants (K) with N-phenyl phenylmethanimine in the range 22-38 M^-1 were measured in dichloromethane.

Chalcogen Bonding Catalysis with Phosphonium Chalcogenide (PCH)

ConspectusThe exploration of new catalysis concepts and strategies to drive chemical reactions is of vital importance for the sustainable development of organic synthesis. Recently, chalcogen bonding catalysis has emerged as a new concept for organic synthesis and has been demonstrated to be an important synthetic tool capable of addressing elusive reactivity and selectivity issues. This Account describes our progress in the research field of chalcogen bonding catalysis, including (1) the discovery of phosphonium chalcogenide (PCH) as highly efficient chalcogen bonding catalyst; (2) the development of "chalcogen-chalcogen bonding catalysis" and "chalcogen···π bonding catalysis" modes; (3) the demonstration that chalcogen bonding catalysis with PCH can activate hydrocarbons to achieve cyclization and coupling reactions of alkenes; (4) the discovery of unusual results that chalcogen bonding catalysis with PCH can solve elusive reactivity and selectivity issues that are inaccessible by classic catalysis approaches; and (5) the elucidation of chalcogen bonding mechanisms.With PCH catalysts, we systematically studied their chalcogen bonding properties, the relationship between structure and catalysis, and their application in facilitating a diverse array of reactions. Enabled by chalcogen-chalcogen bonding catalysis, an efficient assembly reaction of three molecules of β-ketoaldehyde and one indole derivative in a single operation was realized, delivering heterocycles with a newly constructed seven-membered ring. In addition, a Se···O bonding catalysis approach achieved an efficient synthesis of calix[4]pyrroles. We developed a "dual chalcogen bonding catalysis" strategy to solve reactivity and selectivity issues in the Rauhut-Currier-type reactions and related cascade cyclizations, thus shifting conventionally covalent Lewis base catalysis to a cooperative Se···O bonding catalysis approach. This strategy enables the cyanosilylation of ketones to take place in the presence of a ppm-level amount of PCH catalyst loading. Furthermore, we established chalcogen···π bonding catalysis for catalytic transformation of alkenes. In the research field of supramolecular catalysis, the activation of hydrocarbons such as alkenes by weak interactions is a highly interesting unresolved topic. We showed that the Se···π bonding catalysis approach could efficiently activate alkenes to achieve both coupling and cyclization reactions. Chalcogen···π bonding catalysis with PCH catalysts is particularly highlighted by the capability of facilitating strong Lewis-acid inaccessible transformations, such as the controlled cross coupling of triple alkenes. Overall, this Account presents a panoramic view of our research on chalcogen bonding catalysis with PCH catalysts. The works described in this Account provide a significant platform to solve synthetic problems.

Advanced supramolecular design for direct ink writing of soft materials

The exciting advancements in 3D-printing of soft materials are changing the landscape of materials development and fabrication. Among various 3D-printers that are designed for soft materials fabrication, the direct ink writing (DIW) system is particularly attractive for chemists and materials scientists due to the mild fabrication conditions, compatibility with a wide range of organic and inorganic materials, and the ease of multi-materials 3D-printing. Inks for DIW need to possess suitable viscoelastic properties to allow for smooth extrusion and be self-supportive after printing, but molecularly facilitating 3D printability to functional materials remains nontrivial. While supramolecular binding motifs have been increasingly used for 3D-printing, these inks are largely optimized empirically for DIW. Hence, this review aims to establish a clear connection between the molecular understanding of the supramolecularly bound motifs and their viscoelastic properties at bulk. Herein, extrudable (but not self-supportive) and 3D-printable (self-supportive) polymeric materials that utilize noncovalent interactions, including hydrogen bonding, host-guest inclusion, metal-ligand coordination, micro-crystallization, and van der Waals interaction, have been discussed in detail. In particular, the rheological distinctions between extrudable and 3D-printable inks have been discussed from a supramolecular design perspective. Examples shown in this review also highlight the exciting macroscale functions amplified from the molecular design. Challenges associated with the hierarchical control and characterization of supramolecularly designed DIW inks are also outlined. The perspective of utilizing supramolecular binding motifs in soft materials DIW printing has been discussed. This review serves to connect researchers across disciplines to develop innovative solutions that connect top-down 3D-printing and bottom-up supramolecular design to accelerate the development of 3D-print soft materials for a sustainable future.

Xenon Derivatives as Aerogen Bond-Donating Catalysts for Organic Transformations: A Theoretical Study on the Metaphorical "Spherical Cow in a Vacuum" Provides Insights into Noncovalent Organocatalysis

Computations indicate that cationic and noncharged xenon derivatives should exhibit higher catalytic activity than their iodine-based noncovalent organocatalytic congeners. Perfluorophenyl xenonium(II) is expected to demonstrate the best balance between catalytic activity and chemical stability for use in organocatalysis. Comparing its catalytic activity with that of isoelectronic perfluoroiodobenzene indicates that the high catalytic activity of cationic noncovalent organocatalysts is predominantly attributed to the electrostatic interactions with the reaction substrates, which cause the polarization of ligated species during the reaction progress. In contrast, the electron transfer and covalent contributions to the bonding between the catalyst and substrate have negligible effects. The dominant effect of electrostatic interactions results in a strong negative correlation between the calculated Gibbs free energies of activation for the modeled reactions and the highest potentials of the σ-holes on the central atoms of the catalysts. No such correlation is observed for noncharged catalysts.

Square Planar Pt(II) Ion as Electron Donor in Pnictogen Bonding Interactions

It has been proposed that late transition metals with low coordination numbers (square planar or linear) can act as nucleophiles and participate in σ-hole interactions as electron donors. This is due to the existence, in this type of metal complexes, of a pair of electrons located at high energy d-orbitals (dz2 or dx2-y2), which are adequate for interacting with antibonding σ-orbitals [σ*(X–Y)] where Y is usually an electron withdrawing element and X an element of the p-block. This type of d[M]→σ*(X–Y) interaction has been reported for metals of groups 9–11 in oxidation states +1 and +2 (d8 and d10) as electron donors and σ-holes located in halogen and chalcogen atoms as electron acceptors. To our knowledge, it has not been described for σ-holes located in pnictogen atoms. In this manuscript, evidence for the existence of pnictogen bonding involving the square planar Pt(II) metal as the electron donor and Sb as the electron acceptor is provided by using an X-ray structure retrieved from the Cambridge Structural Database (CSD) and theoretical calculations. In particular, the quantum theory of atoms in molecules (QTAIM), the noncovalent interaction plot (NCIPlot) and molecular electrostatic potential (MEP) methods were used. Moreover, to further confirm the nature of the Sb···Pt(II) contact, a recently developed method was used where the electron density (ED) and electrostatic potential (ESP) distribution were compared along the Sb···Pt(II) bond path.

Chalcogen Bonds: How to Characterize Them in Solution?

Chalcogen bonds (ChBs) occur between molecules containing Lewis acidic chalcogen substituents and Lewis bases. Recently, ChB emerged as a pivotal interaction in solution-based applications such as anion recognition, anion transport and catalysis. However, before moving to applications, the involvement of ChB must be established in solution. In this Concept article, we provide a brief review of the currently available experimental investigations of ChB in solution.

Competition Between the Two σ-Holes in the Formation of a Chalcogen Bond

A chalcogen atom Y contains two separate σ-holes when in a R₁ YR₂ molecular bonding pattern. Quantum chemical calculations consider competition between these two σ-holes to engage in a chalcogen bond (ChB) with a NH₃ base. R groups considered include F, Br, I, and tert-butyl (tBu). Also examined is the situation where the Y lies within a chalcogenazole ring, where its neighbors are C and N. Both electron-withdrawing substituents R₁ and R₂ act cooperatively to deepen the two σ-holes, but the deeper of the two holes consistently lies opposite to the more electron-withdrawing group, and is also favored to form a stronger ChB. The formation of two simultaneous ChBs in a triad requires the Y atom to act as double electron acceptor, and so anti-cooperativity weakens each bond relative to the simple dyad. This effect is such that some of the shallower σ-holes are unable to form a ChB at all when a base occupies the other site.

Visible-Light-Switchable Tellurium-Based Chalcogen Bonding: Photocontrolled Anion Binding and Anion Abstraction Catalysis

Exploring new noncovalent bonding motifs with reversibly tunable binding affinity is of fundamental importance in manipulating the properties and functions of supramolecular self-assembly systems and materials. Herein, for the first time, we demonstrate a unique visible-light-switchable telluro-triazole/triazolium-based chalcogen bonding (ChB) system in which the Te moieties are connected by azobenzene cores. The binding strengths between these azo-derived ChB receptors and the halide anions (Cl^- , Br^- ) could be reversibly regulated upon irradiation by visible light of different wavelengths. The cis-bidentate ChB receptors exhibit enhanced halide anion binding ability compared to the trans-monodentate receptors. In particular, the telluro-triazolium-based ChB receptor can achieve both high and significantly photoswitchable binding affinities for halide anions, which enable it to serve as an efficient photocontrolled organocatalyst for ChB-assisted halide abstraction in a Friedel-Crafts alkylation benchmark reaction.

Synthetic application of chalcogenonium salts: beyond sulfonium

The application of chalcogenonium salts in organic synthesis has grown enormously in the past decades since the discovery of the methyltransferase enzyme cofactor S-adenosyl-L-methionine (SAM), featuring a sulfonium center as the reactive functional group. Chalcogenonium salts can be employed as alkylating agents, sources of ylides and carbon-centered radicals, partners for metal-catalyzed cross-coupling reactions and organocatalysts. Herein, we will focus the discussion on heavier chalcogenonium salts (selenonium and telluronium), presenting their utility in synthetic organic transformations and, whenever possible, drawing comparisons in terms of reactivity and selectivity with the respective sulfonium analogues.

Selenoxides as Excellent Chalcogen Bond Donors: Effect of Metal Coordination

The chalcogen bond has been recently defined by the IUPAC as the attractive noncovalent interaction between any element of group 16 acting as an electrophile and any atom (or group of atoms) acting as a nucleophile. Commonly used chalcogen bond donor molecules are divalent selenium and tellurium derivatives that exhibit two σ-holes. In fact, the presence of two σ-hole confers to the chalcogen bonding additional possibilities with respect to the halogen bond, the most abundant σ-hole interaction. In this manuscript, we demonstrate that selenoxides are good candidates to be used as σ-hole donor molecules. Such molecules have not been analyzed before as chalcogen bond donors, as far as our knowledge extends. The σ-hole opposite to the Se=O bond is adequate for establishing strong and directional ChBs, as demonstrated herein using the Cambridge structural database (CSD) and density functional theory (DFT) calculations. Moreover, the effect of the metal coordination of the selenoxide to transition metals on the strength of the ChB interaction has been analyzed theoretically. The existence of the ChBs has been further supported by the quantum theory of atoms in molecules (QTAIM) and the noncovalent interaction plot (NCIPlot).

Adjusting the balance between hydrogen and chalcogen bonds

A complex is assembled which pairs a carboxyl group of X₁COOH with a 1,2,5-chalcogenadiazole ring containing substituents on its C atoms. The OH of the carboxyl group donates a proton to a N atom of the ring to form a OH⋯N H-bond (HB), while its carbonyl O engages in a Y⋯O chalcogen bond (ChB) with the ring in which Y = S, Se, Te. The ChB is strengthened by enlarging the size of the Y atom from S to Se to Te. Placement of an electron-withdrawing group (EWG) X₁ on the acid strengthens the HB while weakening the ChB; the reverse occurs when EWGs are placed on the ring. By selection of the proper substituents on the two units, it is possible to achieve a near perfect balance between the strengths of these two bonds. These bond strengths are also reflected in the NMR spectroscopic properties of the chemical shielding of the various atoms and the coupling between the nuclei directly involved in each bond.

Description of non-covalent interactions in benzyl chalcocyanate crystals from smoothed Cromer-Mann electron density distribution functions

A well-known method to characterize non-covalent interactions consists in the topological analysis of electron density distribution (EDD) functions, complemented by the search for minima in the reduced density gradient (RDG) distributions. Here, we characterize intermolecular interactions occurring in crystals of benzyl chalcocyanate compounds through bond critical points (BCP) of the promolecular electron density (ED) built from the crystallographic Cromer-Mann parameters, at several smoothing levelst. The trajectories formed by thet-dependent BCP locations are interpreted in terms of the intermolecular interactions occurring within the crystal arrangements. Chalcogen…nitro BCPs are clearly present in the unsmoothed EDDs but are annihilated astincreases, while chalcogen…chalcogen BCPs appear and are among the only BCPs left at the highest smoothing level. The chalcogen bonds are differentiated from the other chalcogen interactions through the linear chalcogen…BCP…nitro geometry at low smoothing level and their more negative Laplacian values. The annihilation of CPs can be followed by the apparition of a RDG minimum, associated with a very weak interaction. Along the BCP trajectories, the Laplacian shows a progressive concentration of the ED in the intermolecular space within the crystals and adopts the most negative values at the shortest atom…atom separations. At the termination point of a BCP trajectory, the drastic increase of the ellipticity value illustrates the flattening of the EDD.

Fast relaxing red and near-IR switchable azobenzenes with chalcogen and halogen substituents: periodic trends, tuneable thermal half-lives and chalcogen bonding

Molecular photoswitches operating in the red to near-IR region with controllable thermal relaxation rates are attractive components for photo-regulating biological processes. Herein, we report the synthesis of red-shifted azobenzenes functionalised with the heavier chalcogens and halogens that meet these requirements for biological application; namely fatigue-resistant photo-switching with red and near IR light and functional handles for further functionalisation for application. We report robust periodic trends for the chalcogen and halogen azobenzene series, and exploit intramolecular chalcogen bonding to tune and redshift the absorption maxima, supported by photo-physical measurements and solid-state structural analysis. Remarkably, the rate of the Z → E thermal isomerisation can be tuned over timescales spanning 107 s by judicious choice of chalcogen and halogen substituents.

Supramolecular Chalcogen‐Bonded Semiconducting Nanoribbons at Work in Lighting Devices

This work describes the design and synthesis of a π‐conjugated telluro[3,2‐β][1]‐tellurophene‐based synthon that, embodying pyridyl and haloaryl chalcogen‐bonding acceptors, self‐assembles into nanoribbons through chalcogen bonds. The ribbons π‐stack in a multi‐layered architecture both in single crystals and thin films. Theoretical studies of the electronic states of chalcogen‐bonded material showed the presence of a local charge density between Te and N atoms. OTFT‐based charge transport measurements showed hole‐transport properties for this material. Its integration as a p‐type semiconductor in multi‐layered Cu^I‐based light‐emitting electrochemical cells (LECs) led to a 10‐fold increase in stability (38 h vs. 3 h) compared to single‐layered devices. Finally, using the reference tellurotellurophene congener bearing a C−H group instead of the pyridyl N atom, a herringbone solid‐state assembly is formed without charge transport features, resulting in LECs with poor stabilities (<1 h).

Halonium, chalconium, and pnictonium salts as noncovalent organocatalysts: a computational study on relative catalytic activity

This theoretical study sheds light on the relative catalytic activity of pnictonium, chalconium, and halonium salts in reactions involving elimination of chloride and electrophilic activation of a carbonyl group. DFT calculations indicate that for cationic aromatic onium salts, values of the electrostatic potential on heteroatom σ-holes gradually increase from pnictogen- to halogen-containing species. The higher values of the potential on the halogen atoms of halonium salts result in the overall higher catalytic activity of these species, but in the case of pnictonium and chalconium cations, weak interactions from the side groups provide an additional stabilization effect on the reaction transition states. Based upon quantum-chemical calculations, the catalytic activity of phosphonium(V) and arsenonium(V) salts is expected to be too low to obtain effective noncovalent organocatalytic compounds, whereas stibonium(V), telluronium(IV) and iodonium(III) salts exhibit higher potential in application as noncovalent organocatalysts.

Crystallographic and Theoretical Study of Osme Bonds in Nitrido-Osmium(VI) Complexes

Osme bonds have been recently defined as the attractive interaction between an element of group 8 acting as an electrophile and any atom or group of atoms acting as a nucleophile. To date, the known examples of osme bonds in X-ray structures involve mostly the highly reactive OsO4 and amines and amine oxides. In this work, evidence supporting the existence of osme bonds in osmium(VI) derivatives is reported. In particular, nitrido-osmium(VI) complexes that present square-pyramidal geometries are well disposed to participate in osme bonds opposite to the Os≡N bond. By using a combination of experimental and theoretical results, the existence and importance of this new class of σ-hole interactions is demonstrated in the solid state of several nitrido-osmium(VI) derivatives.

Noncovalent interactions between benzochalcogenadiazoles and nitrogen bases

A theoretical study has been carried out on the intermolecular interactions between tetrafluoro-benzochalcogenadiazoles (chalcogen = S, Se, Te) and a series of nitrogen bases (FCN, ClCN, NP, trans-N₂H₂, pyridine, pyrazole, imidazole) at the B97-D3/def2-TZVP level, to obtain a better insight into the nature and strength of Ch···N chalcogen bond and secondary interaction in the binary and 1:2 ternary complexes. The dispersion force plays a prominent role on the stability of the sulfur complexes, and the electrostatic effect enhanced for the heavier chalcogen complexes. Most of intermolecular bonds display the characters of closed-shell and noncovalent interaction. For the complexes involving pyridine and imidazole, chalcogen bond is stronger than hydrogen bond, while the strength of chalcogen bond is equivalent to the secondary interaction for other complexes. With the addition of nitrogen base in the 1:2 complexes, chalcogen bond is weakened, while the secondary interaction remains unchanged. In the 1:2 complexes formed by pyridine and imidazole, stronger chalcogen bond results in larger negative cooperativity than that of other complexes.

Selective Potassium Chloride Recognition, Sensing, Extraction, and Transport Using a Chalcogen-Bonding Heteroditopic Receptor

Chalcogen bonding (ChB) is rapidly rising to prominence in supramolecular chemistry as a powerful sigma (σ)-hole-based noncovalent interaction, especially for applications in the field of molecular recognition. Recent studies have demonstrated ChB donor strength and potency to be remarkably sensitive to local electronic environments, including redox-switchable on/off anion binding and sensing capability. Influencing the unique electronic and geometric environment sensitivity of ChB interactions through simultaneous cobound metal cation recognition, herein, we present the first potassium chloride-selective heteroditopic ion-pair receptor. The direct conjugation of benzo-15-crown-5 ether (B15C5) appendages to Te centers in a bis-tellurotriazole framework facilitates alkali metal halide (MX) ion-pair binding through the formation of a cofacial intramolecular bis-B15C5 M⁺ (M⁺ = K⁺, Rb⁺, Cs⁺) sandwich complex and bidentate ChB···X^– formation. Extensive quantitative ¹H NMR ion-pair affinity titration experiments, solid–liquid and liquid–liquid extraction, and U-tube transport studies all demonstrate unprecedented KCl selectivity over all other group 1 metal chlorides. It is demonstrated that the origin of the receptor’s ion-pair binding cooperativity and KCl selectivity arises from an electronic polarization of the ChB donors induced by the cobound alkali metal cation. Importantly, the magnitude of this switch on Te-centered electrophilicity, and therefore anion-binding affinity, is shown to correlate with the inherent Lewis acidity of the alkali metal cation. Extensive computational DFT investigations corroborated the experimental alkali metal cation–anion ion-pair binding observations for halides and oxoanions.

Recognition in the Domain of Molecular Chirality: From Noncovalent Interactions to Separation of Enantiomers

It is not a coincidence that both chirality and noncovalent interactions are ubiquitous in nature and synthetic molecular systems. Noncovalent interactivity between chiral molecules underlies enantioselective recognition as a fundamental phenomenon regulating life and human activities. Thus, noncovalent interactions represent the narrative thread of a fascinating story which goes across several disciplines of medical, chemical, physical, biological, and other natural sciences. This review has been conceived with the awareness that a modern attitude toward molecular chirality and its consequences needs to be founded on multidisciplinary approaches to disclose the molecular basis of essential enantioselective phenomena in the domain of chemical, physical, and life sciences. With the primary aim of discussing this topic in an integrated way, a comprehensive pool of rational and systematic multidisciplinary information is provided, which concerns the fundamentals of chirality, a description of noncovalent interactions, and their implications in enantioselective processes occurring in different contexts. A specific focus is devoted to enantioselection in chromatography and electromigration techniques because of their unique feature as "multistep" processes. A second motivation for writing this review is to make a clear statement about the state of the art, the tools we have at our disposal, and what is still missing to fully understand the mechanisms underlying enantioselective recognition.

Stereoselective Processes Based on σ-Hole Interactions

The σ-hole interaction represents a noncovalent interaction between atoms with σ-hole(s) on their surface (such as halogens and chalcogens) and negative sites. Over the last decade, significant developments have emerged in applications where the σ-hole interaction was demonstrated to play a key role in the control over chirality. The aim of this review is to give a comprehensive overview of the current advancements in the use of σ-hole interactions in stereoselective processes, such as formation of chiral supramolecular assemblies, separation of enantiomers, enantioselective complexation and asymmetric catalysis.

Sulfonium and Selenonium Salts as Noncovalent Organocatalysts for the Multicomponent Groebke-Blackburn-Bienaymé Reaction

Sulfonium and selenonium salts, represented by S-aryl dibenzothiophenium and Se-aryl dibenzoselenophenium triflates, were found to exhibit remarkable catalytic activity in the model Groebke-Blackburn-Bienaymé reaction. Kinetic analysis and density functional theory (DFT) calculations indicated that their catalytic effect is induced by the ligation of the reaction substrates to the σ-holes on the S or Se atom of the cations. The experimental data indicated that although 10-fold excess of the chloride totally inhibits the catalytic activity of the sulfonium salts, the selenonium salt remains catalytically active, which can be explained by the experimentally found lower binding constant of the selenonium derivative to chloride in comparison with the sulfonium analogue. Both types of salts exhibit lower catalytic activity in the model reaction than dibenziodolium species.

Halogen bonding and chalcogen bonding mediated sensing

Sigma-hole interactions, in particular halogen bonding (XB) and chalcogen bonding (ChB), have become indispensable tools in supramolecular chemistry, with wide-ranging applications in crystal engineering, catalysis and materials chemistry as well as anion recognition, transport and sensing. The latter has very rapidly developed in recent years and is becoming a mature research area in its own right. This can be attributed to the numerous advantages sigma-hole interactions imbue in sensor design, in particular high degrees of selectivity, sensitivity and the capability for sensing in aqueous media. Herein, we provide the first detailed overview of all developments in the field of XB and ChB mediated sensing, in particular the detection of anions but also neutral (gaseous) Lewis bases. This includes a wide range of optical colorimetric and luminescent sensors as well as an array of electrochemical sensors, most notably redox-active host systems. In addition, we discuss a range of other sensor designs, including capacitive sensors and chemiresistors, and provide a detailed overview and outlook for future fundamental developments in the field. Importantly the sensing concepts and methodologies described herein for the XB and ChB mediated sensing of anions, are generically applicable for the development of supramolecular receptors and sensors in general, including those for cations and neutral molecules employing a wide array of non-covalent interactions. As such we believe this review to be a useful guide to both the supramolecular and general chemistry community with interests in the fields of host-guest recognition and small molecule sensing. Moreover, we also highlight the need for a broader integration of supramolecular chemistry, analytical chemistry, synthetic chemistry and materials science in the development of the next generation of potent sensors.

Noncovalent Interactions Involving Group 6 in Biological Systems: The Case of Molybdopterin and Tungstopterin Cofactors

In this study we propose to coin the term Wolfium bond (WfB) to refer to a net attractive force (noncovalent interaction) between any element of group 6 and electron donor atoms (neutral molecules or anions) and to differentiate it from a coordination bond (metal‐ligand interaction). We provide evidence of the existence of this interaction by inspecting the X‐ray crystal structure of proteins containing Molybdopterin and Tungstopterin cofactors from the Protein Data Bank (PDB). The plausible biological role of the interaction as well as its physical nature (antibonding Wf‐Ligand orbital involved) are also analyzed by means of ab initio calculations (RI‐MP2/def2‐TZVP level of theory), Atoms in Molecules (AIM), Natural Bond Orbital (NBO) and Noncovalent Interactions plot (NCIplot) analyses.

Pnictogen-Centered Cascade Exchangers for Thiol-Mediated Uptake: As(III)-, Sb(III)-, and Bi(III)-Expanded Cyclic Disulfides as Inhibitors of Cytosolic Delivery and Viral Entry

Dynamic covalent exchange cascades with cellular thiols are of interest to deliver substrates to the cytosol and to inhibit the entry of viruses. The best transporters and inhibitors known today are cyclic cascade exchangers (CAXs), producing a new exchanger with every exchange, mostly cyclic oligochalcogenides, particularly disulfides. The objective of this study was to expand the dynamic covalent chalcogen exchange cascades in thiol-mediated uptake by inserting pnictogen relays. A family of pnictogen-expanded cyclic disulfides covering As(III), Sb(III), and Bi(III) is introduced. Their ability to inhibit thiol-mediated cytosolic delivery is explored with fluorescently labeled CAXs as transporters. The promise of inhibiting viral entry is assessed with SARS-CoV-2 lentiviral vectors. Oxygen-bridged seven-membered 1,3,2-dithiabismepane rings are identified as privileged scaffolds. The same holds for six-membered 1,3,2-dithiarsinane rings made from asparagusic acid and para-aminophenylarsine oxide, which are inactive or toxic when used alone. These chemically complementary Bi(III) and As(III) cascade exchangers inhibit both thiol-mediated cytosolic delivery and SARS-CoV-2 lentivector uptake at concentrations of 10 μM or lower. Crystal structures, computational models, and exchange kinetics support that lentivector entry inhibition of the contracted dithiarsinane and the expanded dithiabismepane rings coincides with exchange cascades that occur without the release of the pnictogen relay and benefit from noncovalent pnictogen bonds. The identified leads open perspectives regarding drug delivery as well as unorthodox approaches toward dynamic covalent inhibition of cellular entry.

Cyclic Thiosulfonates for Thiol-Mediated Uptake: Cascade Exchangers, Transporters, Inhibitors

Thiol-mediated uptake is emerging as a powerful method to penetrate cells. Cyclic oligochalcogenides (COCs) have been identified as privileged scaffolds to enable and inhibit thiol-mediated uptake because they can act as dynamic covalent cascade exchangers, i.e., every exchange produces a new, covalently tethered exchanger. In this study, our focus is on the essentially unexplored COCs of higher oxidation levels. Quantitative characterization of the underlying dynamic covalent exchange cascades reveals that the initial ring opening of cyclic thiosulfonates (CTOs) proceeds at a high speed even at a low pH. The released sulfinates exchange with disulfides in aprotic but much less in protic environments. Hydrophobic domains were thus introduced to direct CTOs into hydrophobic pockets to enhance their reactivity. Equipped with such directing groups, fluorescently labeled CTOs entered the cytosol of living cells more efficiently than the popular asparagusic acid. Added as competitive agents, CTOs inhibit the uptake of various COC transporters and SARS-CoV-2 lentivectors. Orthogonal trends found with different transporters support the existence of multiple cellular partners to account for the diverse expressions of thiol-mediated uptake. Dominant self-inhibition and high activity of dimers imply selective and synergistic exchange in hydrophobic pockets as distinguishing characteristics of thiol-mediated uptake with CTOs. The best CTO dimers with hydrophobic directing groups inhibit the cellular entry of SARS-CoV-2 lentivectors with an IC₅₀ significantly lower than the previous best CTO, below the 10 μM threshold and better than ebselen. Taken together, these results identify CTOs as an intriguing motif for use in cytosolic delivery, as inhibitors of lentivector entry, and for the evolution of dynamic covalent networks in the broadest sense, with reactivity-based selectivity of cascade exchange emerging as a distinguishing characteristic that deserves further attention.

Metal Coordination Enhances Chalcogen Bonds: CSD Survey and Theoretical Calculations

In this study the ability of metal coordinated Chalcogen (Ch) atoms to undergo Chalcogen bonding (ChB) interactions has been evaluated at the PBE0-D3/def2-TZVP level of theory. An initial CSD (Cambridge Structural Database) inspection revealed the presence of square planar Pd/Pt coordination complexes where divalent Ch atoms (Se/Te) were used as ligands. Interestingly, the coordination to the metal center enhanced the σ-hole donor ability of the Ch atom, which participates in ChBs with neighboring units present in the X-ray crystal structure, therefore dictating the solid state architecture. The X-ray analyses were complemented with a computational study (PBE0-D3/def2-TZVP level of theory), which shed light into the strength and directionality of the ChBs studied herein. Owing to the new possibilities that metal coordination offers to enhance or modulate the σ-hole donor ability of Chs, we believe that the findings presented herein are of remarkable importance for supramolecular chemists as well as for those scientists working in the field of solid state chemistry.