Super-faradaic charge yields for aluminium dissolution in neutral aqueous solutions

Electrochemical-based approaches for the treatment of forever chemicals: Removal of perfluoroalkyl and polyfluoroalkyl substances (PFAS) from wastewater

Electrochemical based approaches for the treatment of recalcitrant water borne pollutants are known to exhibit superior function in terms of efficiency and rate of treatment. Considering the stability of Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are designated as forever chemicals, which generating from various industrial activities. PFAS are contaminating the environment in small concentrations, yet exhibit severe environmental and health impacts. Electro-oxidation (EO) is a recent development that treats PFAS, in which different reactive species generates at anode due to oxidative reaction and reductive reactions at the cathode. Compared to water and wastewater treatment methods those being implemented, electrochemical approaches demonstrate superior function against PFAS. EO completely mineralizes (almost 100 %) non-biodegradable organic matter and eliminate some of the inorganic species, which proven as a robust and versatile technology. Electrode materials, electrolyte concentration pH and the current density applying for electrochemical processes determine the treatment efficiency. EO along with electrocoagulation (EC) treats PFAS along with other pollutants from variety of industries showed highest degradation of 7.69 mmol/g of PFAS. Integrated approach with other processes was found to exhibit improved efficiency in treating PFAS using several electrodes boron-doped diamond (BDD), zinc, titanium and lead based with efficiency the range of 64 to 97 %.

Mitigating Electrode Fouling in Electrocoagulation by Means of Polarity Reversal: The Effects of Electrode Type, Current Density, and Polarity Reversal Frequency

One of the biggest issues in electrocoagulation (EC) water treatment processes is electrode fouling, which can cause decreased coagulant production, increased ohmic resistance and energy consumption, and reduced contaminant removal efficiency, among other operational problems. While it has been suggested that switching the current direction intermittently (i.e., polarity reversal, PR) can help mitigate electrode fouling, conflicting results about the utility of this approach have been reported in the literature. The objective of this study was to systematically investigate the effects of PR frequency and current density on the performance of Fe-EC and Al-EC. It was found that operating Fe-EC under the PR mode reduced neither electrode fouling nor energy consumption. Notably, the Faradaic efficiency (ϕ) in Fe-EC decreased with increasing PR frequency; ϕ was as low as 10% when a PR frequency of 0.5 minutes was employed. Unlike Fe-EC, operating Al-EC under the PR mode resulted in high coagulant production efficiencies, reduced energy consumption, and diminished electrode fouling. In addition to comparing PR-EC and DC-EC, a novel strategy to minimize electrode fouling was investigated. This strategy involved operating Fe DC-EC and Al DC-EC with a Ti-IrO₂ cathode, whose fouling by Ca- and Mg-containing minerals could be readily avoided by periodically switching the current direction.

Electrode passivation, faradaic efficiency, and performance enhancement strategies in electrocoagulation-a review

Treating water and wastewater is energy-intensive, and traditional methods that require large amounts of chemicals are often still used. Electrocoagulation (EC), an electrochemical treatment technology, has been proposed as a more economically and environmentally sustainable alternative. In EC, sacrificial metal electrodes are used to produce coagulant in-situ, which offers many benefits over conventional chemical coagulation. However, material precipitation on the electrodes during long term operation induces a passivating effect that decreases treatment performance and increases power requirements. Overcoming this problem is considered to be the greatest challenge facing the development of EC. In this critical review, the studies that have examined the nature of electrode passivation, and its effect on treatment performance are considered. A fundamental approach is used to examine the association between passivation and faradaic efficiency, a surrogate for EC performance. In addition, the strategies that have been proposed to remove or avoid passivation are reviewed, including aggressive ion addition, AC current operation, polarity reversal, ultrasonication, and mechanical cleaning of the electrodes. It is concluded that the success of implementing each method is dependent on critical operating parameters, and careful consideration should be taken when designing an EC system based on the phenomena discussed in this article. In conclusion, this review provides insight into passivation mechanisms, delivers guidelines for sustaining high treatment performance, and offers an outlook for the future development of EC.

Electrocoagulation of colloidal biogenic selenium

Colloidal elemental selenium (Se(0)) adversely affects membrane separation processes and aquatic ecosystems. As a solution to this problem, we investigated for the first time the removal potential of Se(0) by electrocoagulation process. Colloidal Se(0) was produced by a strain of Pseudomonas fluorescens and showed limited gravitational settling. Therefore, iron (Fe) and aluminum (Al) sacrificial electrodes were used in a batch reactor under galvanostatic conditions. The best Se(0) turbidity removal (97 %) was achieved using iron electrodes at 200 mA. Aluminum electrodes removed 96 % of colloidal Se(0) only at a higher current intensity (300 mA). At the best Se(0) removal efficiency, electrocoagulation using Fe electrode removed 93 % of the Se concentration, whereas with Al electrodes the Se removal efficiency reached only 54 %. Due to the less compact nature of the Al flocs, the Se-Al sediment was three times more voluminous than the Se-Fe sediment. The toxicity characteristic leaching procedure (TCLP) test showed that the Fe-Se sediment released Se below the regulatory level (1 mg L(-1)), whereas the Se concentration leached from the Al-Se sediment exceeded the limit by about 20 times. This might be related to the mineralogical nature of the sediments. Electron scanning micrographs showed Fe-Se sediments with a reticular structure, whereas the Al-Se sediments lacked an organized structure. Overall, the results obtained showed that the use of Fe electrodes as soluble anode in electrocoagulation constitutes a better option than Al electrodes for the electrochemical sedimentation of colloidal Se(0).