In situ bioelectrokinetic remediation of phenol-contaminated soil by use of an electrode matrix and a rotational operation mode

Soil electrokinetic remediation to restore mercury-polluted soils: A critical review

Mercury (Hg) is one of the top chemicals of concern to the World Health Organization and a potentially hazardous trace element in the environment. Hg pollution is a serious issue, and due to its metallic nature or poor soluble mineral properties (such as some sulfides), Hg pollution demands chemical additives to increase its solubility before removal. Different viewpoints were used to illustrate how electrokinetic remediation technology could be used to remove Hg from polluted soil, including 1) cathode approaching, 2) pulsed electric field, 3) chemical additives, 4) coupling with phytoremediation and bioremediation, 5) integration of adsorption and a permeable reactive barrier, and 6) electrodialytic design, operation factors, and electrode materials. To collect the relevant publications during the last 32 years (1993-2024), search words such as "Soil electrokinetic & Hg" were entered into six search engines. Only a few articles have been published concerning electrokinetic remediation of Hg. The effectiveness of iodide in removing Hg was recently demonstrated by testing several chelating compounds. Iodide added to the soil solution migrated Hg toward the anode, demonstrating the presence of Hg iodide anionic complexes. By contrast, anionic Hg chloride complexes did not dominate, as evidenced by Hg migration toward the cathode when chloride was introduced to the soil. Although electrokinetic design remediation has advanced significantly, most studies have focused on Hg remediation using the soil electrokinetic approach, which is a conventional design. One study used the electrodialytic design, and one electrode arrangement (rectangular and hexagonal). For the readers' advantage, further developments for the electrokinetic remediation of Hg from soil were also suggested.

Exploring the role of microbes for the management of persistent organic pollutants

Persistent organic pollutants (POPs) are chemicals which have been persisting in the environment for many years due to their longer half-lives. POPs have gained attention over the last few decades due to the unsustainable management of chemicals which led to their widespread and massive contamination of biota from different strata and environments. Due to the widespread distribution, bio-accumulation and toxic behavior, POPs have become a risk for organisms and environment. Therefore, a focus is required to eliminate these chemicals from the environment or transform into non-toxic forms. Among the available techniques for the removal of POPs, most of them are inefficient or incur high operational costs. As an alternative to this, microbial bioremediation of POPs such as pesticides, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, pharmaceuticals and personal care products is much more efficient and cost-effective. Additionally, bacteria play a vital role in the biotransformation and solubilization of POPs, which reduces their toxicity. This review specifies the Stockholm Convention that evaluates the risk profile for the management of existing as well as emerging POPs. The sources, types and persistence of POPs along with the comparison of conventional elimination and bioremediation methods of POPs are discussed comprehensively. This study demonstrates the existing bioremediation techniques of POPs and summaries the potential of microbes which serve as enhanced, cost-effective, and eco-friendly approach for POPs elimination.

An overview of bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils

The global problem of petroleum contamination in soils seriously threatens environmental safety and human health. Current studies have successfully demonstrated the feasibility of bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils due to their easy implementation, environmental benignity, and enhanced removal efficiency compared to bioremediation. This paper reviewed recent progress and development associated with bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils. The working principles, removal efficiencies, affecting factors, and constraints of the two technologies were thoroughly summarized and discussed. The potentials, challenges, and future perspectives were also deliberated to shed light on how to overcome the barriers and realize widespread implementation on large scales of these two technologies.

A comprehensive study on microbial-surfactants from bioproduction scale-up toward electrokinetics remediation of environmental pollutants: Challenges and perspectives

Currently, researchers have focused on electrokinetic (EK) bioremediation due to its potential to remove a wide-range of pollutants. Further, to improve their performance, synthetic surfactants are employed as effective additives because of their excellent solubility and mobility. Synthetic surfactants have an excessive position in industries since they are well-established, cheap, and easily available. Nevertheless, these surfactants have adverse environmental effects and could be detrimental to aquatic and terrestrial life. Owing to social and environmental awareness, there is a rising demand for bio-based surfactants in the global market, from environmental sustainability to public health, because of their excellent surface and interfacial activity, higher and stable emulsifying property, biodegradability, non- or low toxicity, better selectivity and specificity at extreme environmental conditions. Unfortunately, challenges to biosurfactants, like expensive raw materials, low yields, and purification processes, hinder their applicability to large-scale. To date, extensive research has already been conducted for production scale-up using multidisciplinary approaches. However, it is still essential to research and develop high-yielding bacteria for bioproduction through traditional and biotechnological advances to reduce production costs. Herein, this review evaluates the recent progress made on microbial-surfactants for bioproduction scale-up and provides detailed information on traditional and advanced genetic engineering approaches for cost-effective bioproduction. Furthermore, this study emphasized the role of electrokinetic (EK) bioremediation and discussed the application of BioS-mediated EK for various pollutants remediation.

Mechanism of bio-electrokinetic remediation of pyrene contaminated soil: Effects of an electric field on the degradation pathway and microbial metabolic processes

In this study, the mechanism of bio-electrokinetic (BIO-EK) remediation to improve the degradation of pyrene was evaluated based on an analysis of the intermediate products and the microbial community. The results show that BIO-EK remediation has a higher pyrene degradation efficiency on pyrene and its intermediate products than the bioremediation and electrokinetic (EK) remediation processes. A series of intermediate products were detected. According to the type of the intermediate products, two degradation pathways, biological metabolism and electrochemical oxidation, are proposed in the BIO-EK remediation of pyrene. Furthermore, the primary microbial taxa involved in the pollutant degradation changed, which led to variations in the functional gene components. The abundant and functional genes related to metabolism were specifically analyzed. The results indicate that the electric field promotes the expression of metabolisms associated with 14 carbohydrates, 13 lipids, 13 amino acids, five energies, and in particular, 11 xenobiotics. These results suggest that in addition to the promotion effect on the microbial metabolism caused by the electric field, BIO-EK remediation can promote the degradation of pollutants due to the coexistence of a microbial metabolic pathway and an electrochemical oxidation pathway.

Bioremediation of polycyclic aromatic hydrocarbons contaminated soil under the superimposed electric field condition

An innovative superimposed electric field (SEF) was designed with the aim to achieve uniform removal of polycyclic aromatic hydrocarbons (PAHs) in soil. Also the influence of SEF on the bioremediation efficiency of PAHs was investigated in compared with the common electric field (CEF). Five experiments were conducted in this study, namely EK-CEF (applied CEF), EKB-CEF (CEF enhanced bioremediation), EK-SEF (applied SEF), EKB-SEF (SEF enhanced bioremediation), and Bio (bioremediation). The results indicated that electric field with periodically reversed polarity could effectively prevent the occurrence of large changes in soil pH, temperature, and electric current. The electric field intensity of SEF was concentrated in the range of 0.5-1.5 V/cm, and the difference between the maximum and minimum PAHs removal percentage in EK-SEF was just 5.4%, in comparison to 14.8% in EK-CEF. The bioremediation promoting effect did not show significant difference between SEF and CEF. Compared to Bio, the removal percentages of the 5-ring and 6-ring PAHs attributed to the degrading bacteria were much higher in EKB-SEF and EKB-CEF. Moreover, the microbial number increased with the distance away from electrodes, and the microbial community changed correspondingly. All these would be resulted in differences removal efficiencies among different PAHs components. Despite its intrinsic advantages, the influence of SEF on soil physicochemical and biological properties needs further study.

Change in soil ion content and soil water-holding capacity during electro-bioremediation of petroleum contaminated saline soil

This study investigated changes in soil ion content and soil water-holding capacity during electro-bioremediation (EK-Bio) of petroleum contaminated saline soil (ion content of 3.92 g/kg). The results indicated that the soil ions surrounded the electrodes with increasing time, thus changing the soil water-holding capacity. According to the Van Genuchten model fitting results, the soil residual water content (θr) increased with the soil ion content, which represented a capacity decrease of the soil water supply. At the end of the EK-Bio experiment, the θr values in the soil near (site A) and far from (site B) the electrodes were 19.1 % and 12.1 %, where the soil ion content was 7.92 g/kg and 0.55 g/kg, respectively. The ion aggregation process significantly impacted the growth of soil microbial. The bacteria numbers decreased when the soil ion content was high (7.41 g/kg, site A) and low (0.84 g/kg, site B) after 70 days of treatment. The applied electric field significantly enhanced the bioremediation efficiency. However, the biodegradation promotion effect was the weakest at site A. The synergistic effect between the applied electric field and degrading bacteria was delayed.

A review of electrokinetically enhanced bioremediation technologies for PHs

Since the early 1980's there have been several different strategies designed and applied to the remediation of subsurface environment including physical, chemical and biological approaches. They have had varying degrees of success in remediating contaminants from subsurface soils and groundwater. The objective of this review is to examine the range of technologies for the remediation of contaminants, particularly petroleum hydrocarbons, in subsurfaces with a specific focus on bioremediation and electrokinetic remediation. Further, this review examines the efficiency of remediation carried out by combining bioremediation and electrokinetic remediation. Surfactants, which are slowly becoming the selected chemicals for mobilizing contaminants, are also considered in this review. The current knowledge gaps of these technologies and techniques identified which could lead to development of more efficient ways of utilizing these technologies or development of a completely new technology.

Novel Bacillus cereus strain from electrokinetically remediated saline soil towards the remediation of crude oil

A new strain SWH-15 was successfully isolated after initial electrokinetic remediation experiment using the same saline soil sampled from Shengli Oilfield, China. Four methods (morphological and biochemical characteristics, whole-cell fatty acid methyl esters (FAMEs) analysis, 16S rRNA sequence analysis and DNA G + C content and DNA-DNA hybridization analysis) were used to identify the taxonomic status of SWH-15 and confirmed that SWH-15 was a novel species of the Bacillus (B.) cereus group. Then, we assessed the degrading ability of the novel strain SWH-15 to crude oil through a microcosm experiment with four treatments, including control (CK), bioremediation using SWH-15 (Bio), electrokinetic remediation (EK), and combined bioremediation and electrokinetic remediation (Bio + EK). The results showed that the Bio + EK combined remediation treatment was more effective than the CK, Bio, and EK treatments in degrading crude oil contaminants. Bioaugmentation, by addition of the strain SWH-15 had synergistic effect with EK in Bio + EK treatment. Bacterial community analysis showed that electrokinetic remediation alone significantly altered the bacterial community of the saline soil. The addition of the strain SWH-15 alone had a weak effect on the bacterial community. However, the strain SWH-15 boosted the growth of other bacterial species in the metabolic network and weakened the impact of electrical field on the whole bacterial community structure in the Bio + EK treatment.

An overview of electrokinetic soil flushing and its effect on bioremediation of hydrocarbon contaminated soil

Combination of electrokinetic soil flushing and bioremediation (EKSF-Bio) technology has attracted many researchers attention in the last few decades. Electrokinetic is used to increase biodegradation rate of microorganisms in soil pores. Therefore, it is necessary to use solubilizing agents such as surfactants that can improve biodegradation process. This paper describes the basic understanding and recent development associated with electrokinetic soil flushing, bioremediation, and its combination as innovative hybrid solution for treating hydrocarbon contaminated soil. Surfactant has been widely used in many studies and practical applications in remediation of hydrocarbon contaminant, but specific review about those combination technology cannot be found. Surfactants and other flushing/solubilizing agents have significant effects to increase hydrocarbon remediation efficiency. Thus, this paper is expected to provide clear information about fundamental interaction between electrokinetic, flushing agents and bioremediation, principal factors, and an inspiration for ongoing and future research benefit.

Distribution of ion contents and microorganisms during the electro-bioremediation of petroleum-contaminated saline soil

This study investigated the distribution of ion contents and microorganisms during the electro-bioremediation (EK-Bio) of petroleum-contaminated saline soil. The results showed that soil ions tend to accumulate around the electrodes, and the concentration was correlated with the distance from the electrodes. The average soil ion content was 7.92 g/kg around the electrodes (site A) and 0.55 g/kg at the furthest distance from the electrodes (site B) after 112 days of treatment, while the initial average content was 3.92 g/kg. Smooth linear (R² = 0.98) loss of soil ions was observed at site C, which was closer to the electrodes than site B, and had a final average soil ion content of 1.96 g/kg. The dehydrogenase activity was much higher in EK-Bio test soil than in the Bio test soil after 28 days of treatment, and followed the order: site C > site B > site A. However, the soil dehydrogenase activity dropped continuously when the soil ion reached very high and low concentrations at sites A and B. The soil microbial community varied in sample sites that had different ion contents, and the soil microbial diversity followed the order: site C > site B > site A. The applied electric field clearly enhanced the biodegradation efficiency for soil petroleum contaminants. However, the biodegradation promotion effects were weakening in soils where the ion contents were extremely high and low (sites A and B). These results can provide useful information for EK-Bioremediation of organic-contaminated saline soil.

Environmental Electrokinetics for a sustainable subsurface

Soil and groundwater are key components in the sustainable management of the subsurface environment. Source contamination is one of its main threats and is commonly addressed using established remediation techniques such as in-situ chemical oxidation (ISCO), in-situ chemical reduction (ISCR; most notably using zero-valent iron [ZVI]), enhanced in-situ bioremediation (EISB), phytoremediation, soil-washing, pump-and-treat, soil vapour extraction (SVE), thermal treatment, and excavation and disposal. Decades of field applications have shown that these techniques can successfully treat or control contaminants in higher permeability subsurface materials such as sands, but achieve only limited success at sites where low permeability soils, such as silts and clays, prevail. Electrokinetics (EK), a soil remediation technique mostly recognized in in-situ treatment of low permeability soils, has, for the last decade, been combined with more conventional techniques and can significantly enhance the performance of several of these remediation technologies, including ISCO, ISCR, EISB and phytoremediation. Herein, we discuss the use of emerging EK techniques in tandem with conventional remediation techniques, to achieve improved remediation performance. Furthermore, we highlight new EK applications that may come to play a role in the sustainable treatment of the contaminated subsurface.

Coupling electrokinetics with microbial biodegradation enhances the removal of cycloparaffinic hydrocarbons in soils

An innovative approach that couples electrokinetics with microbial degradation to breakdown cycloparaffinic hydrocarbons in soils is described. Soils were spiked with cyclododecane, used as a model pollutant, at approximately 1000mgkg^-1. A mixture of petroleum-utilizing bacteria was added to achieve about 10⁶-10⁷ CFUg^-1. Then, three treatments were applied for 25 days: (1) no electric field, control; (2) a constant voltage gradient of 1.3Vcm^-1 in one direction; and (3) the same electric field, but with periodical switching of polarity. The degradation pathway of cyclododecane was not changed by the electric field, but the dynamic processes were remarkably enhanced, especially when the electric field was periodically switched. After 25 days, 79.9% and 87.0% of the cyclododecane was degraded in tests 2 and 3, respectively; both much higher than the 61.5% degraded in test 1. Analysis of the intermediate products strongly indicated that the competitive advantage of the electric field was the increase in ring-breaking of cyclododecane, resulting in greater concentrations of linear substances that were more susceptible to microbial attack, that is, β-oxidation. The conditions near the cathode were more favorable for the growth and metabolism of microorganisms, which also enhanced β-oxidation of the linear alkanoic acids. Therefore, when the electric field polarity was periodically switched, the functions of both the anode and cathode electrodes were applied across the whole soil cell, further increasing the degradation efficiency.

Effect of electric field on the performance of soil electro-bioremediation with a periodic polarity reversal strategy

In this work, it is studied the effect of the electric fields (within the range 0.0-1.5 V cm(-1)) on the performance of electrobioremediation with polarity reversal, using a bench scale plant with diesel-spiked kaolinite with 14-d long tests. Results obtained show that the periodic changes in the polarity of the electric field results in a more efficient treatment as compared with the single electro-bioremediation process, and it does not require the addition of a buffer to keep the pH within a suitable range. The soil heating was not very important and it did not cause a change in the temperature of the soil up to values incompatible with the life of microorganisms. Low values of water transported by the electro-osmosis process were attained with this strategy. After only 14 d of treatment, by using the highest electric field studied in this work (1.5 V cm(-1)), up to 35.40% of the diesel added at the beginning of the test was removed, value much higher than the 10.5% obtained by the single bioremediation technology in the same period.

In-Situ Remediation Approaches for the Management of Contaminated Sites: A Comprehensive Overview

Though several in-situ treatment methods exist to remediate polluted sites, selecting an appropriate site-specific remediation technology is challenging and is critical for successful clean up of polluted sites. Hence, a comprehensive overview of all the available remediation technologies to date is necessary to choose the right technology for an anticipated pollutant. This review has critically evaluated the (i) technological profile of existing in-situ remediation approaches for priority and emerging pollutants, (ii) recent innovative technologies for on-site pollutant remediation, and (iii) current challenges as well as future prospects for developing innovative approaches to enhance the efficacy of remediation at contaminated sites.

Synergistic effects of bioremediation and electrokinetics in the remediation of petroleum-contaminated soil

The present study evaluated the coupling interactions between bioremediation (BIO) and electrokinetics (EK) in the remediation of total petroleum hydrocarbons (TPH) by using bio-electrokinetics (BIO-EK) with a rotatory 2-D electric field. The results demonstrated an obvious positive correlation between the degradation extents of TPH and electric intensity both in the EK and BIO-EK tests. The use of BIO-EK showed a significant improvement in degradation of TPH as compared to BIO or EK alone. The actual degradation curve in BIO-EK tests fitted well with the simulated curve obtained by combining the degradation curves in BIO- and EK-only tests during the first 60 d, indicating a superimposed effect of biological degradation and electrochemical stimulation. The synergistic effect was particularly expressed during the later phase of the experiment, concurrent with changes in the microbial community structure. The community composition changed mainly according to the duration of the electric field, leading to a reduction in diversity. No significant spatial shifts in microbial community composition and bacterial numbers were detected among different sampling positions. Soil pH was uniform during the experimental process, soil temperature showed no variations between the soil chambers with and without an electric field.

Electrokinetic-enhanced bioremediation of organic contaminants: a review of processes and environmental applications

There is current interest in finding sustainable remediation technologies for the removal of contaminants from soil and groundwater. This review focuses on the combination of electrokinetics, the use of an electric potential to move organic and inorganic compounds, or charged particles/organisms in the subsurface independent of hydraulic conductivity; and bioremediation, the destruction of organic contaminants or attenuation of inorganic compounds by the activity of microorganisms in situ or ex situ. The objective of the review is to examine the state of knowledge on electrokinetic bioremediation and critically evaluate factors which affect the up-scaling of laboratory and bench-scale research to field-scale application. It discusses the mechanisms of electrokinetic bioremediation in the subsurface environment at different micro and macroscales, the influence of environmental processes on electrokinetic phenomena and the design options available for application to the field scale. The review also presents results from a modelling exercise to illustrate the effectiveness of electrokinetics on the supply electron acceptors to a plume scale scenario where these are limiting. Current research needs include analysis of electrokinetic bioremediation in more representative environmental settings, such as those in physically heterogeneous systems in order to gain a greater understanding of the controlling mechanisms on both electrokinetics and bioremediation in those scenarios.

Electrokinetic remediation of organochlorines in soil: enhancement techniques and integration with other remediation technologies

Electrokinetic remediation has been increasingly used in soils and other matrices for numerous contaminants such as inorganic, organic, radionuclides, explosives and their mixtures. Several strategies were tested to improve this technology effectiveness, namely techniques to solubilize contaminants, control soil pH and also couple electrokinetics with other remediation technologies. This review focus in the experimental work carried out in organochlorines soil electroremediation, aiming to systemize useful information to researchers in this field. It is not possible to clearly state what technique is the best, since experimental approaches and targeted contaminants are different. Further research is needed in the application of some of the reviewed techniques. Also a number of technical and environmental issues will require evaluation for full-scale application. Removal efficiencies reported in real contaminated soils are much lower than the ones obtained with spiked kaolinite, showing the influence of other factors like aging of the contamination and adsorption to soil particles, resulting in important challenges when transferring technologies into the field.

In situ degradation of phenol and promotion of plant growth in contaminated environments by a single Pseudomonas aeruginosa strain

For bioremediation of contaminated environments, a bacterial strain, SZH16, was isolated and found to reduce phenol concentration in a selective medium. Using the reaction vessel containing the soil mixed with phenol and bacteria, we found that the single strain degraded efficiently the phenol level in soil samples. The strain was identified as Pseudomonas aeruginosa on the basis of biochemical tests and by comparison of 16S rDNA sequences, and phosphate solubilization and IAA production were not observed in the strain. Simultaneous examination of the role of strain SZH16 in the plant growth and phenol biodegradation was performed. Results showed that inoculation of the single strain in the phenol-spiked soil resulted in corn growth promotion and in situ phenol degradation and the increase in plant biomass correlated with the decrease in phenol content. Colonization experiments showed that the population of the SZH16 strain remained relatively constant. All these findings indicated that the corn growth promotion might be due to reduction in phytotoxicity, a result of phenol biodegradation by the single strain SZH16. Furthermore, the strain was found to stimulate corn growth and reduce phenol concentration simultaneously in phenol-containing water, and even historically contaminated field soils. It is attractive for environment remediation and agronomic applications.

Activity and viability of polycyclic aromatic hydrocarbon-degrading Sphingomonas sp. LB126 in a DC-electrical field typical for electrobioremediation measures

There has been growing interest in employing electro‐bioremediation, a hybrid technology of bioremediation and electrokinetics for the treatment of contaminated soil. Knowledge however on the effect of weak electrokinetic conditions on the activity and viability of pollutant‐degrading microorganisms is scarce. Here we present data about the influence of direct current (DC) on the membrane integrity, adenosine triphosphate (ATP) pools, physico‐chemical cell surface properties, degradation kinetics and culturability of fluorene‐degrading Sphingomonas sp. LB126. Flow cytometry was applied to quantify the uptake of propidium iodide (PI) and the membrane potential‐related fluorescence intensities (MPRFI) of individual cells within a population. Adenosine tri‐phosphate contents and fluorene biodegradation rates of bulk cultures were determined and expressed on a per cell basis. The cells' surface hydrophobicity and electric charge were assessed by contact angle and zeta potential measurements respectively. Relative to the control, DC‐exposed cells exhibited up to 60% elevated intracellular ATP levels and yet remained unaffected on all other levels of cellular integrity and functionality tested. Our data suggest that direct current (X = 1 V cm⁻¹; J = 10.2 mA cm⁻²) as typically used for electrobioremediation measures has no negative effect on the activity of the polycyclic aromatic hydrocarbon (PAH)‐degrading soil microorganism, thereby filling a serious gap of the current knowledge of the electrobioremediation methodology.

Treatment of phenol-contaminated soil by Corynebacterium glutamicum and toxicity removal evaluation

Biodegradation of phenol-contaminated soils using Corynebacterium glutamicum, was optimized in this study. Phenol degradation by C. glutamicum was observed in soil supplemented with 1% yeast extract as a substrate. We determined the optimal inoculation size of C. glutamicum (7.4 log(10) CFU mL(-1)) for the degradation of phenol-contaminated soil. Under optimal conditions (1% yeast extract and 7.4 log(10) CFU mL(-1) of C. glutamicum), the efficiency of phenol degradation in soil was greater than 94% at three days after treatment. The degradation of phenol-contaminated soil by C. glutamicum was evaluated using acute toxicity assays with Daphnia magna. Based on the acute toxicity assays, we found that the residual toxicity of contaminated soil was removed completely after three days of C. glutamicum treatment.

Effect of electric intensity on the microbial degradation of petroleum pollutants in soil

Electro-bioremediation is an innovative method to remedy organic-polluted soil. However, the principle of electrokinetic technology enhancing the function of microbes, especially the relationship of electric intensity and biodegradation efficiency, is poorly investigated. Petroleum was employed as a target organic pollutant at a level of 50 g/kg (mass of petroleum/mass of dry soil). A direct current power supply was used for tests with a constant direct current electric voltage (1.0 V/cm). The petroleum concentrations were measured at 3275-3285 nm after extraction using hexane, the group composition of crude oil was analyzed by column chromatography. The water content of soil was kept 25% (m/m). The results indicated the degradation process was divided into two periods: from day 1 to day 40, from day 41 to day 100. The treatment of soil with an appropriate electric field led the bacteria to have a persistent effect in the whole period of 100 days. The highest biodegradation efficiency of 45.5% was obtained after treatment with electric current and bacteria. The electric-bioremediation had a positive effect on alkane degradation. The degradation rate of alkane was 1.6 times higher in the soil exposed to electric current than that treated with bacteria for 100 days. A proper direct current could stimulate the microbial activities and accelerate the biodegradation of petroleum. There was a positive correlation between the electric intensities and the petroleum bioremediation efficiencies with a coefficient of 0.9599.

Enhanced biodegradation of pentachlorophenol in unsaturated soil using reversed field electrokinetics

This study investigated the use of electrokinetics in unsaturated soil to promote biodegradation of pentachlorophenol through increased contact between bacteria and contaminant. Soil microcosms, contaminated with approximately 100 mg kg(-1) pentachlorophenol (containing [(14)C]-PCP as a tracer), and inoculated with a specific pentachlorophenol-degrading bacterium (Sphingobium sp. UG30-1 x 10(8) cfu g(-1)) were subjected to constant and regularly reversed electric currents (10 mA). The former caused large pH and moisture content changes due to water electrolysis and electroosmotic effects, with subsequent negative impacts on biodegradation parameters including enzyme activity and contaminant mineralisation (as measured by (14)CO(2) evolution rate). The reversed field caused little change in pH and moisture content and led to more rapid contaminant mineralisation, lower soil contaminant concentration in the majority of the microcosms and increased soil enzyme activity (with the exception of soil immediately adjacent to the anode). The presence of an electric field, if suitably applied, may therefore enhance contaminant biodegradation in unsaturated soil.

The use of 2D non-uniform electric field to enhance in situ bioremediation of 2,4-dichlorophenol-contaminated soil

In situ bioremediation is a safe and cost-effective technology for the cleanup of organic-contaminated soil, but its remediation rate is usually very slow, which results primarily from limited mass transfer of pollutants to the degrading bacteria in soil media. This study investigated the feasibility of adopting 2D non-uniform electric field to enhance in situ bioremediation process by promoting the mass transfer of organics to degrading bacteria under in situ conditions. For this purpose, a 2D non-uniform electrokinetic system was designed and tested at bench-scale with a sandy loam as the model soil and 2,4-dichlorophenol (2,4-DCP) as the model organic pollutant at two common operation modes (bidirectional and rotational). Periodically, the electric field reverses its direction at bidirectional mode and revolves a given angle at rotational mode. The results demonstrated that the non-uniform electric field could effectively stimulate the desorption and the movement of 2,4-DCP in the soil. The 2,4-DCP was mobilized through soil media towards the anode at a rate of about 1.0 cmd(-1)V(-1). The results also showed that in situ biodegradation of 2,4-DCP in the soil was greatly enhanced by the applied 2D electric field upon operational mode. At the bidirectional mode, an average 2,4-DCP removal of 73.4% was achieved in 15 days, and the in situ biodegradation of 2,4-DCP was increased by about three times as compared with that uncoupled with electric field, whereas, 34.8% of 2,4-DCP was removed on average in the same time period at the rotational mode. In terms of maintaining remediation uniformity in soil, the rotational operation remarkably excelled the bidirectional operation. In the hexagonal treatment area, the 2,4-DCP removal efficiency adversely increase with the distance to the central electrode at the bidirectional mode, while the rotational mode generated almost uniform removal in soil bed.