Transformation, products, and pathways of chlorophenols via electro-enzymatic catalysis: How to control toxic intermediate products

Treatment of contaminants by a cathode/FeIII/peroxydisulfate process: Formation of suspended solid organic-polymers

Treatment of highly contaminated wastewaters containing refractory or toxic organic contaminants (e.g. industrial wastewaters) is becoming a global challenge. Most technologies focus on efficient degradation of organic contaminants. Here we improve the cathode/Fe^III/peroxydisulfate (PDS) technology by turning down the current density and develop an innovative mechanism for organic contaminants abatement, namely polymerization rather than degradation, which allows simultaneous contaminants removal and resource recovery from wastewater. This polymerization leads to organic-particles (suspended solid organic-polymers) formation in bulk solution, which is demonstrated by eight kinds of representative organic contaminants. Taking phenol as a representative, 83% of PDS is saved compared to degradation process, with 87.2% of DOC removal. The formed suspended solid organic-polymers occupy 59.2% of COD of the original organics in solution, and can be easily separated from aqueous solution by sedimentation or filtration. The separated organic-polymers are a series of polymers coupled by phenolic monomers, as confirmed by FTIR and ESI-MS analyzes. The energy contained in the recovered organic polymers (4.76 × 10^-5 kWh for 100 mL of 1 mM phenol solution in this study) can fully compensate the consumed electrical energy (2.8 × 10^-5 kWh) in the treatment process. A representative polymerization model for this process is established, in which the SO₄^•- and HO^• generated from PDS activation initiate the polymerization and improve the polymerization degree by the production of oligomer intermediates. A practical coking wastewater treatment is carried out to verify the research results and get positive feedback, with 56.0% of DOC abatement and the suspended solid organic-polymers accounts for 42.5% of the total COD in the raw wastewater. The energy consumption (47 kWh/kg COD, including electricity and PDS cost) is lower than the values in previous reports. This study provides a novel method for industrial wastewater treatment based on polymerization mechanism, which is expected to recover resources while removing pollutants with low consumption.

Hydrogen atom abstraction mechanism for organic compound oxidation by acetylperoxyl radical in Co(II)/peracetic acid activation system

Peracetic acid (PAA) has been widely used as an alternative disinfectant in wastewater treatment, and PAA-based advanced oxidation processes (AOPs) have drawn increasing attention recently. Among the generated reactive species after PAA activation, acetylperoxyl radical (CH₃CO₃•) plays an important role in organic compounds degradation. However, little is known about the reaction mechanism on CH₃CO₃• attack due to the challenging of experimental analysis. In this study, a homogeneous PAA activation system was built up using Co(II) as an activator at neutral pH to generate CH₃CO₃• for phenol degradation. More importantly, reaction mechanism on CH₃CO₃•-driven oxidation of phenol is elucidated at the molecular level. CH₃CO₃• with lower electrophilicity index but much larger Waals molecular volume holds different phenol oxidation route compared with the conventional •OH. Direct evidences on CH₃CO₃• formation and attack mechanism are provided through integrated experimental and theoretical results, indicating that hydrogen atom abstraction (HAA) is the most favorable route in the initial step of CH₃CO₃•-driven phenol oxidation. HAA reaction step is found to produce phenoxy radicals with a low energy barrier of 4.78 kcal mol^-1 and free energy change of -12.21 kcal mol^-1. The generated phenoxy radicals will undergo further dimerization to form 4-phenoxyphenol and corresponding hydroxylated products, or react with CH₃CO₃• to generate catechol and hydroquinone. These results significantly promote the understanding of CH₃CO₃•-driven organic pollutant degradation and are useful for further development of PAA-based AOPs in environmental applications.

Effects of combined 4-chlorophenol and Cu2+ on functional genes for nitrogen and phosphorus removal and heavy metal resistance genes in sequencing batch bioreactors

The effects of combined 4-chlorophenol (4-CP) and Cu²⁺ on microbial community structures, functional genes for nitrogen and phosphorus removal, and heavy metal resistance genes (HMRGs) were explored in wastewater treatment using sequencing batch bioreactors (SBRs). Compared to influent 4-CP (2.3-4.5 mg/L), the removal of pollutants including chemical oxygen demands (COD), NH₄⁺-N, PO₄^3--P, and 4-CP was inhibited under Cu²⁺ stress (5 mg/L). The effects of Cu²⁺ on microbial community structures were more significant than those of 4-CP with respect to operational time, while the dominant function from gene information was not affected with or without influent 4-CP and Cu²⁺ via sequencing analysis. The influent 4-CP and Cu²⁺ largely influenced the dynamic changes of functional genes and HMRGs, and the abundance of partial HMRGs was correlated to the functional genes and dominant genera. This study provides insights into the treatment of combined chlorophenols and Cu²⁺ in wastewater.

Characterization and application of biochar-immobilized crude horseradish peroxidase for removal of phenol from water

Biochar (BC) has attracted much attention as an environmentally friendly material for application in wastewater treatment. In this study, a suitability of wood-derived BC as a support for covalent immobilization of horseradish peroxidase (HRP) across glutaraldehide as crosslinker, known for the capability to remove phenol from water, was investigated. The efficiency of the immobilized HRP in removal of phenol (2 mM) from water at different reaction conditions (varying dosages of polyethylene glycol (PEG300) 0-750 mg/L; H₂O₂ 1.5-3.5 mM, as well as reaction time 5-120 min) and the general toxicity of bio-treated water (Allium cepa test) were measured. All analyzes were performed for free enzyme as well. The immobilized enzyme showed the highest activity at temperature 30 °C and pH 7.0. The greatest efficiency of immobilized enzyme in phenol removing (90 %) was obtained by applying 2.5 mM H₂O₂ and 1.5 mg/L of PEG300 at pH 7.0 after 2 h of reaction period. After 4 washings, immobilized HRP retained more than 79 % activity with phenol removal of 64 %. Utilizing immobilized enzyme significantly reduces the toxicity of the tested water (80 %), which further suggested that it might be considered as an environmentally acceptable process for wastewater treatment. Possible degradation products remained in treated water were analyzed in water samples by liquid and gas chromatography with mass spectrometry, including also analysis of volatiles by solid phase microextraction technique; different phenol-base compounds were detected.

Kinetic modelling for concentration and toxicity changes during the oxidation of 4-chlorophenol by UV/H2O2

This work develops a kinetic model that allow to predict the water toxicity and the main degradation products concentration of aqueous solutions containing 4-chlorophenol oxidised by UV/H₂O₂. The kinetic model was developed grouping degradation products of similar toxicological nature: aromatics (hydroquinone, benzoquinone, 4-chlorocatechol and catechol), aliphatics (succinic, fumaric, maleic and malonic acids) and mineralised compounds (oxalic, acetic and formic acids). The degradation of each group versus time was described as a mathematical function of the rate constant of a second-order reaction involving the hydroxyl radical, the quantum yield of lump, the concentration of the hydroxyl radicals and the intensity of the emitted UV radiation. The photolytic and kinetic parameters characterising each lump were adjusted by experimental assays. The kinetic, mass balance and toxicity equations were solved using the Berkeley Madonna numerical calculation tool. Results showed that 4-chlorophenol would be completely removed during the first hour of the reaction, operating with oxidant molar ratios higher than R = 200 at pH  6.0 and UV = 24 W. Under these conditions, a decrease in the rate of total organic carbon (TOC) removal close to 50% from the initial value was observed. The solution colour, attributed to the presence of oxidation products as p-benzoquinone and hydroquinone, were oxidised to colourless species, that resulted in a decrease in the toxicity of the solutions (9.95 TU) and the aromaticity lost.

Risk assessment of cardiotoxicity to zebrafish (Danio rerio) by environmental exposure to triclosan and its derivatives

Triclosan (TCS) and its two derivatives (2,4-dichlorophenol and 2,4,6-trichlorophenol) are priority pollutants that coexist in aquatic environments. Joint exposure of TCS, 2,4-dichlorophenol and 2,4,6-trichlorophenol, hereafter referred to as TCS-DT, contributes severe toxicity to aquatic organisms. There is currently a paucity of data regarding TCS-DT molecular toxicity, especially on cardiac diseases. We used zebrafish (Danio rerio) as a model organism, and evaluated the molecular-level cardiotoxicity induced by TCS-DT from embryonic to adult stages. TCS-DT exposure prominently led to phenotypic malformations, such as pericardial cysts, cardiac bleeding, increased SV-BA distance, decreased heart rate and reduced ejection fraction, as well as abnormal swimming behavior. Analyses of the GO and KEGG pathways revealed enrichment pathways related to cardiac development and screened for significantly down-regulated adrenaline signaling in cardiomyocytes. The cardiac marker genes (amhc, cmlc2, vmhc, and nkx2.5) were obtained through protein-protein interaction (PPI) networks, and expressed as down-regulation by WISH. After chronic exposure to TCS-DT from 30 to 90-dpf, both body mass and heart indexes prominently increased, showing myocardial hypertrophy, abnormal heart rate and histopathological injury. Heart tissue damage included disordered and ruptured myocardial fibers, broken and dissolved myofilaments, nuclear pyknosis, mitochondrial injury and inflammatory cell infiltration. Further, abnormal changes in a series of cardiac functions-related biomarkers, including superoxide dismutase, triglyceride, lactate dehydrogenase and creatinine kinase MB, provided evidence for cardiac pathological responses. These results highlight the molecular mechanisms involving TCS-DT induced cardiac toxicity, and provide theoretical data to guide prevention and treatment of pollutant-induced cardiac diseases.

A novel condition of mild electrical stimulation exerts immunosuppression via hydrogen peroxide production that controls multiple signaling pathway

Different modes of exogenous electrical stimulation at physiological strength has been applied to various diseases. Previously, we extensively demonstrated the usability of mild electrical stimulation (MES) with low frequency pulse current at 55 pulses per second (MES₅₅) for several disease conditions. Here we found that MES with high frequency pulse-current (5500 pulse per second; MES₅₅₀₀) suppressed the overproduction of pro-inflammatory cytokines induced by phorbol myristate acetate/ionomycin in Jurkat T cells and primary splenocytes. MES₅₅₀₀ also suppressed the overproduction of inflammatory cytokines, improved liver damage and reduced mouse spleen enlargement in concanavalin-A-treated BALB/c mice. The molecular mechanism underlying these effects included the ability of MES₅₅₀₀ to induce modest amount of hydrogen peroxide and control multiple signaling pathways important for immune regulation, such as NF-κB, NFAT and NRF2. In the treatment of various inflammatory and immune-related diseases, suppression of excessive inflammatory cytokines is key, but because immunosuppressive drugs used in the clinical setting have serious side effects, development of safer methods of inhibiting cytokines is required. Our finding provides evidence that physical medicine in the form of MES₅₅₀₀ may be considered as a novel therapeutic tool or as adjunctive therapy for inflammatory and immune-related diseases.

Polymerization of micropollutants in natural aquatic environments: A review

Micropollutants with high ecotoxicological risks are frequently detected in aquatic environments, which has aroused great concern in recent years. Humification is one of the most important natural detoxification processes of aquatic micropollutants, and the core reactions of this process are polymerization and coupling. During humification, micropollutants are incorporated into the macrostructures of humic substances and precipitated from aqueous systems into sediments. However, the similarities and differences among the polymerization/coupling pathways of micropollutants in different oxidative systems have not been systematically summarized in a review. This article reviews the current knowledge on the weak oxidation-induced spontaneous polymerization/coupling transformation of micropollutants. First, four typical weak oxidative conditions for the initiation of micropollutant polymerization reactions in aquatic environments are compared: enzymatic catalysis, biomimetic catalysis, metal oxide oxidation, and photo-initiated oxidation. Second, three major subsequent spontaneous transformation pathways of micropollutants are elucidated: radical polymerization, nucleophilic addition/substitution and cyclization. Different solution conditions are also summarized. Furthermore, the importance of toxicity evolution during the weak oxidation-induced coupling/polymerization of micropollutants is particularly emphasized. This review provides a new perspective for the transformation mechanism and pathways of micropollutants from aquatic systems into sediments and the atmosphere and offers theoretical support for developing micropollutant control technologies.

Transformation of halobenzoquinones with the presence of amino acids in water: Products, pathways and toxicity

The transformation and detoxification of halobenzoquinones (HBQs), a class of emerging disinfection byproducts (DBPs), was studied in the presence of amino acids (AAs). The reaction activity of three HBQs with AAs generally ranked as 2-chlorobenzoquinone (CBQ) < 2,6-dichlorobezoquinone (DCBQ) < tetrachloroquinone (TCBQ), consistent with their halogenation degree and the calculated electron affinity (EA) results. According to mass spectrometry and density functional theory (DFT) calculations, AAs can easily covalently incorporate into HBQs via nucleophilic addition (CBQ and DCBQ) or substitution (TCBQ) through CNC or CSC linkages. Hydroxylation, nucleophilic reaction and decarboxylation were proposed to be the three major reaction pathways for HBQs transformation with AAs. HBQs firstly underwent the spontaneous hydrolysis, resulting in OH-HBQs formation. Then, nucleophilic addition/substitution of AAs occurred on HBQs and OH-HBQs to produce AA-HBQs/AA-HBQs-OH adducts. These adducts were subsequently oxidized into their corresponding decarboxylated forms. Based on the results of Luminous bacterium Q67 acute toxicity test, the toxicity of HBQs solution greatly decreased with AAs presented. The toxicity change was well explained by the lowest unoccupied molecular orbital energy (E_LUMO) of formed products. Notably, the step that AAs nucleophilic bonded with HBQs led to the highest rise of E_LUMO, which should be the most effective pathway for HBQs detoxification. This study shows that binding with amino nitrogen compounds should be an important process for HBQs transformation and detoxification, which helps to better understand the fate of this typical DBP in surface water.

Transformation and products of captopril with humic constituents during laccase-catalyzed oxidation: Role of reactive intermediates

The transformation of captopril (CAP), a widely-used thiol drug, was studied with the presence of dissolved model humic constituents (HCs) in a laccase-catalyzed system. Reaction products were analyzed by ultra-performance liquid chromatography coupled to time-of-flight mass spectrometry and condensed fukui function computation. CAP reacted with different model HCs in the enzymatic system for 1 h, ranging from 75% (syringic acid) to 96% (p-coumaric acid). In the absence of HCs, only 15% of CAP was removed through self-coupling. The presence of HCs apparently changed the transformation of CAP in aqueous environment, and the HC reactive intermediates played an important role. First, during laccase catalysis, HCs with different structures were oxidized to produce reactive intermediates, including phenoxyl radical cation, ortho-, and para-quinone intermediates. Second, these intermediates were readily attacked by CAP via nucleophilic reactions, forming C-S-C covalent conjugates. More importantly, the standard reduction potential of these intermediates is a critical parameter, as PCA showed the highest reactivity to the nucleophilic addition reaction with CAP by forming phenoxy radical cations. While SYR showed the least reactivity due to the formation of para-quinone intermediates. Therefore, the functional groups on HCs could greatly influence the cross-coupling with CAP, as well as the type and stability of the coupling products. This work clearly demonstrated the transformation of CAP and other thiol drugs with the presence of HCs in aqueous environment, which is similar to the natural humification process.