Determination of diffusion coefficients of biocides on their passage through organic resin-based renders

Application, release, ecotoxicological assessment of biocide in building materials and its soil microbial response

Biocides are used in building materials to protect the building against microbial colonization and biodeterioration. However, these biocides are introduced by gradual leaching into soils in proximity of the buildings. This review discusses the aspects and characteristics of biocides from building materials in terms of (i) in-situ leaching and simulation thereof in-vitro and in-field tests, (ii) persistence, as well as photolytic and biodegradation, and its influence on toxicological evaluation, and (iii) evaluation of terrestrial toxicity by conventional ecotoxicological tests and novel holistic testing approaches. These aspects are influenced by multiple parameters, out of which water availability, physicochemical properties of microhabitats, combination of biocidal building materials, soil parameters, and composition of the soil microbiome are of utmost relevance. Deeper understanding of this multiparametric system and development of comprehensive characterization methodologies remains crucial, as to facilitate realistic assessment of the environmental impact of biocides used in construction materials and the corresponding degradation byproducts.

Environmental risk assessment of priority biocidal substances on Polish surface water sample

The EU directive 2013/39/EU has incorporated four biocidal compounds as priority substances: diuron, isoproturon, cybutryne, and terbutryn. The research was undertaken to determine the concentration of biocides in surface waters in three locations in southern Poland: the Wisła River in Kraków, the Wisłoka River in Mielec, and the drainage ditch draining water from arable fields located near Mielec. Environmental samples were taken in two series: winter (February) and spring (May and June). The analyses were carried out using gas chromatography with mass spectrometry. The seasonality of biocides in surface waters was observed. In winter samples, the concentrations were below MQL, while in spring, they ranged from a few to several dozen nanograms per liter. The highest concentrations of all analyzed compounds were recorded in water taken from the Wisła River. According to directive 2013/39/EU, the maximum allowable concentration was exceeded only in the case of cybutryne in water from the Wisła, both in May and in June. The assessment of the toxicity with the tested compounds was defined based on the Environmental Risk Assessment method. Low risk was estimated for diuron and isoproturon, while moderate risk for terbutryn and cybutryne.

Influence of façade orientation on the leaching of biocides from building façades covered with mortars and plasters

Biocides used in building façades to prevent potential growth of algae, fungi and bacteria are of major concern regarding the quality of stormwater runoff. The aim of the study was to analyze the influence of the façade orientation on the biocide release under real weather conditions to gain information for the development of on-site treatment systems. Field tests with model houses containing two different plaster compositions were carried out over a period of 18 months. The results of the analyzed rain events demonstrate that façade orientation plays an important role in the leaching loads of biocides. Biocide loads in the runoff decreased corresponding to the wind direction. High cumulated active substance discharges of diuron (149 mg/m²), carbendazim (43.5 mg/m²), terbutryn (9.3 mg/m²) and octylisothiazolinone (OIT) (31.9 mg/m²) were found in the runoff of the façades facing the predominant weather orientation. Meanwhile, the highest concentrations of diuron (2.8 mg/L) and OIT (0.7 mg/L) were observed in the runoff from façades with smaller runoff volumes. The obtained results demonstrate that treatment facilities have to be installed at all building sides. The hydraulic and the substance load is highest at the weather side, which has a strong influence on the dimension and the lifetime of the treatment system.

A mathematical approach for the analysis of data obtained from the monitoring of biocides leached from treated materials exposed to outdoor conditions

Leaching processes are responsible for the release of biocides from treated materials into the environment. Adequate modeling of emission processes is required in order to predict emission values in the framework of the risk assessment of biocidal products intended for long-term service life. Regression approaches have been applied to data obtained from the long-term monitoring of biocide emissions in experiments involving semi-field conditions. Due to the complex interaction of different underlying mechanisms such as water and biocide diffusion and desorption, however, these attempts have proven to be of limited usefulness - at least, for the available biocide emission data. It seems that the behavior of the biocide emission curve depends to a considerable extent on whichever underlying mechanism is slowest at a given point in time, thus limiting the amount of biocide available for release. Building on results obtained in the past few years, the authors propose a criterion for determining which mechanism controls the leaching process at a given point in time based on the slope of the log-log emission curve. In addition, a first-order approximation of this slope value is presented which displays advantages both in terms of computability and interpretability. Finally, an algorithm for the determination of breakpoints in the slope of the log-log emission curve is presented for the demarcation of phases within which one mechanism acts as a limiting factor.