The role of methanogens in acetic acid production under different salinity conditions

Effects of salinity on anaerobic digestion: Performance, microbial physiology, and community dynamics

Anaerobic digestion (AD) is widely applied to treatment and energy recovery from organic wastewater/wastes, while the efficiency of AD can be limited by salinity stress. This paper reviews the effects of salinity on AD. First of all, the effects of salinity on AD performance were compared, revealing that methane production is more susceptible to salinity stress. Secondly, the influence of salinity on microbial physiology and intracellular molecules was examined, demonstrating that salinity stress reduces the activity of key enzymes and increases the concentration of extracellular polymeric substances during AD. Thirdly, variations in microbial community structure under salinity stress were discussed, with archaeal communities showing more significant restructuring, including reduced dominance of acetoclastic methanogens. At last, strategies to mitigate salinity inhibition were presented, along with prospects for future research directions. This review provides theoretical guidance for engineering applications and strategies for enhancing AD in treating saline substrates.

Multi-omics analysis of microbial spatiotemporal succession and metabolite differences in pit mud of varying cellar ages and spatial positions

Microbes in pit mud (PM) are vital for the solid-state fermentation of strong-flavour baijiu (SFB), influencing the flavour and quality of SFB through metabolic activity. This study aimed to elucidate the differences in microbes and metabolites in PM at varying cellar ages and spatial positions. Microbes and metabolites in PM exhibited significant spatiotemporal variations, with temporal heterogeneity being more pronounced than spatial heterogeneity. Fourteen and 21 dominant genera were identified in 7-year and 50-year PM, respectively. Redundancy analysis suggested that pH, lactic acid, humus, and acetic acid drive microbial community succession. A total of 255 metabolites were identified, with acids, carbohydrates, and alcohols being the most prevalent. Significant positive correlations between the biomarkers and the main differential metabolites were revealed. Structural equation modeling demonstrated significant correlations between physicochemical factors, biomarkers, and the main differential metabolites. This study provides a foundation for future modifications of the quality and flavour of SFB.

Characterizing properties and environmental behaviors of organic matter in sludge using liquid chromatography organic carbon detection and organic nitrogen detection: A mini-review

The presence of organic matter in sludge plays a significant role in sludge dewatering, anaerobic sludge digestion, resource (i.e., protein) recovery and pollutants removal (i.e., heavy metals) from sludge, as well as post-application of sludge liquid and solid digestate. This study summarized the current knowledge on using liquid chromatography organic carbon detection and organic nitrogen detection (LC-OCD-OND) for characterization and quantification of organic matter in sludge samples related with sludge treatment processes by fractionating organic matter into biopolymers, building blocks, humic substances, low molecular weight (LMW) acids, low LMW neutrals, and inorganic colloids. In addition, the fate, interaction, removal, and degradation of these fractions in different sludge treatment processes were summarized. A standardized extraction procedure for organic components in different extracellular polymeric substances (EPS) layers prior to the LC-OCD-OND analysis is highly recommended for future studies. The analysis of humic substances using the LC-OCD-OND analysis in sludge samples should be carefully conducted. In conclusion, this study not only provides a theoretical foundation and technical guidance for future experiments and practices in characterizing sludge organic matter using LC-OCD-OND, but also serves as a valuable resource for consulting engineers and other professionals involved in sludge treatment.

High-retention membrane bioreactors for sugarcane vinasse treatment: Opportunities for environmental impact reduction and wastewater valorization

Ethanol production has increased over the years, and Brazil ranking second in the world using sugarcane as the main raw material. However, 10-15 L of vinasse are generated per liter of ethanol produced. Besides large volumes, this wastewater has high polluting potential due to its low pH and high concentrations of organic matter and nutrients. Given the high biodegradability of the organic matter, the treatment of this effluent by anaerobic digestion and membrane separation processes results in the generation of high value-added byproducts such as volatile fatty acids (VFAs), biohydrogen and biogas. Membrane bioreactors have been widely evaluated due to the high efficiency achieved in vinasse treatment. In recent years, high retention membrane bioreactors, in which high retention membranes (nanofiltration, reverse osmosis, forward osmosis and membrane distillation) are combined with biological processes, have gained increasing attention. This paper presents a critical review focused on high retention membrane bioreactors and the challenges associated with the proposed configurations. For nanofiltration membrane bioreactor (NF-MBR), the main drawback is the higher fouling propensity due to the hydraulic driving force. Nonetheless, the development of membranes with high permeability and anti-fouling properties is uprising. Regarding osmotic membrane bioreactor (OMBR), special attention is needed for the selection of a proper draw solution, which desirably should be low cost, have high osmolality, reduce reverse salt flux, and can be easily reconcentrated. Membrane distillation bioreactor (MDBR) also exhibit some shortcomings, with emphasis on energy demand, that can be solved with the use of low-grade and residual heat, or renewable energies. Among the configurations, MDBR seems to be more advantageous for sugarcane vinasse treatment due to the lower energy consumption provided by the use of waste heat from the effluent, and due to the VFAs recovery, which has high added value.

Recent advances in constructed wetlands methane reduction: Mechanisms and methods

Constructed wetlands (CWs) are artificial systems that use natural processes to treat wastewater containing organic pollutants. This approach has been widely applied in both developing and developed countries worldwide, providing a cost-effective method for industrial wastewater treatment and the improvement of environmental water quality. However, due to the large organic carbon inputs, CWs is produced in varying amounts of CH4 and have the potential to become an important contributor to global climate change. Subsequently, research on the mitigation of CH4 emissions by CWs is key to achieving sustainable, low-carbon dependency wastewater treatment systems. This review evaluates the current research on CH4 emissions from CWs through bibliometric analysis, summarizing the reported mechanisms of CH4 generation, transfer and oxidation in CWs. Furthermore, the important environmental factors driving CH4 generation in CW systems are summarized, including: temperature, water table position, oxidation reduction potential, and the effects of CW characteristics such as wetland type, plant species composition, substrate type, CW-coupled microbial fuel cell, oxygen supply, available carbon source, and salinity. This review provides guidance and novel perspectives for sustainable and effective CW management, as well as for future studies on CH4 reduction in CWs.

Enhanced anaerobic reduction of nitrobenzene at high salinity by betaine acting as osmoprotectant and regulator of metabolism

Anaerobic technology is extensively applied in the treatment of industrial organic wastewater, but high salinity always triggers microbial cell dehydration, causing the failure of the anaerobic process. In this work, betaine, one kind of compatible solutes which could balance the osmotic pressure of anaerobic biomass, was exogenously added for enhancing the anaerobic reduction of nitrobenzene (NB) at high salinity. Only 100 mg L^-1 betaine dosing could significantly promote the removal efficiency of NB within 35 h at 9% salinity (36.92 ± 4.02% without betaine and 72.94 ± 6.57% with betaine). The relieving effects on salt stress could be observed in the promotion of more extracellular polymeric substances (EPS) secretion with betaine addition. Additionally, the oxidation-reduction potential (ORP), as well as the electron transfer system (ETS) value, was increased with betaine addition, which was reflected in the improvement of system removal efficiency and enzyme activity. Microbial community analysis demonstrated that Bacillus and Clostridiisalibacter which were positively correlated with the stability of the anaerobic process were enriched with betaine addition at high salinity. Metagenomic analysis speculated that the encoding genes for salt tolerance (kdpB/oadA/betA/opuD/epsP/epsH) and NB degradation (nfsA/wrbA/ccdA/menC) obtained higher relative abundance with betaine addition under high salt environment, which might be the key to improving salt tolerance of anaerobic biomass. The long-term assessment demonstrated that exogenous addition betaine played an important role in maintaining the stability of the anaerobic system, which would be a potential strategy to achieve a high-efficiency anaerobic process under high salinity conditions.

Changes in the characteristics of dissolved organic matter during sludge treatment: A critical review

Dissolved organic matter (DOM) of sludge is a heterogeneous mixture of high to low molecular weight organic substances which is including proteinaceous compounds, carbohydrates, humic substances, lipids, lignins, organic acids, organic micropollutants and other biological derived substances generated during wastewater treatment. This paper reviews definition, composition, quantification, and transformation of DOM during different sludge treatments, and the complex interplay of DOM with microbial communities. In anaerobic digestion, anaerobic digestion-refractory organic matter, particularly compounds showing polycyclic steroid-like, alkane and aromatic structures can be generated after pretreatment. During dewatering, the DOM fraction of low molecular weight proteins (< 20,000 Dalton) is the key parameter deteriorating sludge dewaterability. During composting, decomposition and polymerization of DOM occur, followed by the formation of humic substances. During landfill treatment, the composition of DOM, particularly humic substances, are related with leachate quality. Finally, suggestions are proposed for a better understanding of the transformation and degradation of DOM during sludge treatment. Future work in sludge studies needs the establishment and implementation of definitions for sample handling and the standardization of DOM methods for analysis, including sample preparation and fractionation, and data integration. A more detailed knowledge of DOM in sludge facilitates the operation and optimization of sludge treatment technologies.

Effects of influent salinity on water purification and greenhouse gas emissions in lab-scale constructed wetlands

Salinity has a significant impact on the sewage treatment efficiency of constructed wetlands (CWs), as well as affecting the greenhouse gas emissions of CWs. A lab-scale CW simulation system was constructed to observe the treatment efficiency and greenhouse gas flux occurring in CWs at different influent salinities (0%, 0.5%, 1.0%, 1.5%, and 2.0%). The results show that (1) the removal rates of COD, TN, NH₄⁺-N, NO₃^--N, and TP reach the highest at salinity of 0 or 0.5%. And the lowest removal rates are all at a salinity of 2.0%. (2) The emission flux of CO₂, CH₄, and N₂O in CWs varies with an increase in salinity. The trends of CO₂ and CH₄ emission flux were consistent with those of COD reduction rate. However, it was opposite for N₂O flux to that of TN, NH₄⁺-N, and NO₃^--N removal rate. Affected by salinity, the greenhouse gas emission flux in this study is generally lower than what was reported in literature. (3) Correlation analysis showed that CO₂ and CH₄ emission fluxes were positively correlated with the COD reduction rate. N₂O emission flux was negatively correlated with the removal rates of TN, NH₄⁺-N, and NO₃^--N. The results suggest that different pollutants are inhibited by salinity to different degrees. COD is more affected by salinity than nitrogen and phosphorus, while nitrogen is more easily inhibited by salinity than phosphorus. CWs can have a high removal rate of pollutants in treating low-salinity wastewater. Although increased salinity reduces treatment efficiency of wastewater to some extent, it also inhibits the emission of CO₂ and CH₄.

Innovative upflow anaerobic sludge osmotic membrane bioreactor for wastewater treatment

A novel upflow anaerobic sludge-forward osmotic membrane bioreactor was developed for simultaneous wastewater treatment, membrane fouling reduction, and nutrient recovery. An upflow anaerobic sludge blanket (UASB) reactor was incorporated into the system, suspending the anaerobic sludge at the bottom of the reactor. A forward osmosis membrane replaced the traditional three-phase separator of the UASB technology. The removals of chemical oxygen demand, PO₄^3-, and NH₄⁺ were all more than 95% with low membrane fouling in this system. Halotolerant Fusibacter, which can ferment organics to acetate, was increased rapidly from 0.1% to 5% in this saline environment. Acetoclastic Methanosaeta was the most dominant prokaryotes and responsible for majority of methane production. Reduction of membrane fouling in this system was verified by the fluorescence excitation-emission matrix spectrophotometry. Furthermore, phosphorus recovery and salinity build-up mitigation were achieved using periodic microfiltration to recover 57-105 mg/L phosphorus from pH 9 to 12.

Strategies of anaerobic sludge granulation in an EGSB reactor

Anaerobic sludge granulation was evaluated in an expanded granular sludge bed (EGSB) reactor based on the increases in the specific organic loading rate (SOLR). The effect of precursor substances (calcium chloride, sodium chloride, and tannin) on the development of granular sludge was also investigated in batch reactors. The reactors were fed with synthetic sewage and operated in mesophilic conditions. The EGSB was operated with a variable hydraulic retention time (HRT) and the batch reactors, with cycles of 8 h and 16 h. The increase of SOLR from 17.4 ± 7.4 to 104.6 ± 66.7 mgCOD gVSS^-1 d^-1 in the EGSB resulted in an increase on the average granules diameter from 344.3 to 1583.3 μm. These conditions also favored the reduction rates of chemical oxygen demand (COD) and volatile fatty acids (VFAs) concentration in the reactor. When the upflow velocity suffered an abrupt increase (from 0.06 L h^-1 to 0.25 L h^-1), the granules size began to decrease and lose their settleability characteristics. Considering this, it is proposed to start the biomass granulation process without effluent recirculation, and, after the granules reach the desired size and settleability capacity, the normal operation of EGSB reactor starts. The results showed that calcium chloride was more efficient for granulation. CaCl₂ addition can be performed only during the reactor's start-up, improving granulation and reducing start-up time. Thus, these results have practical implications as granules maintenance is the key to the proper EGSB operation.

Characterization of microbial community profiles associated with quality of Chinese strong-aromatic liquor through metagenomics

AIMS

Microorganisms in fermentation pits (FPs) play key roles for Chinese-strong-aromatic-liquor (CSAL) production. However, the microbial community in the FPs is still poorly understood. Here, the aim of this study was to reveal the diversity and potential functions of microbiota in FPs.

METHODS AND RESULTS

Sequencing-by-synthesis-based metagenomic sequencing and annotation results revealed that the microbiota of FPs was primarily composed of Firmicutes (54·6%), Euryarchaeota (15·3%), Bacteroidetes (10·1%), Gammaproteobacteria (5·8%), Opisthokonta (5·7%) and Unclassified_Bacteria (2·3%). And 133 genera were identified as the dominant genera of this fermentative food. Lactobacillus, Sedimentibacter, Syntrophomonas, Methanoculleus, Methanobacterium, Bacillus, Clostridium, Galactomyces, Candida, Pichia, Penicillium and Aspergillus were defined as active populations for biosynthesizing the characteristic volatile compounds of CSAL. The study also revealed that the microbial community structures changed significantly with different cellar ages and over different geographical regions. (i) The presence of Bacteroidetes was the most distinctive feature that characterized the different FPs ages. (ii) Distinct contents of Gammaproteobacteria and Euryarchaeota were observed at different positions in the FPs. (iii) Euryarchaeota markedly contributed to the generation of the character of the liquors with distinct geographical associations.

CONCLUSIONS

This study demonstrated that the changes of microbial communities determined the different quality characteristics of CSAL.

SIGNIFICANCE AND IMPACT OF THE STUDY

This research contributes to a deeper understanding of the FPs microbial composition and shows a new microbial resource for biotechnological applications.

Performance evaluation and microbial community dynamics in a novel AnMBR for treating antibiotic solvent wastewater

This study aims at evaluating the performance and microbial community dynamics of anaerobic membrane bioreactor (AnMBR) treating antibiotic solvent wastewater at improved influent quality period. The whole process was divided into five phases according to the influent COD concentration with a fluctuated volume loading rate (VLR) ranging from 3.9 to 12.7kgCOD/(m³·d). After 249days of operation, the average COD and THF removal efficiency were 93.6% and 98.7%, respectively. The accumulation of VFA, relatively low pH, decline of biogas production and methane content were discovered at higher VLR (>10kgCOD/(m³·d)). Methanomicrobiales are the major population throughout the whole running period. Methanosaetaceae showed a minor relative abundance compared both of them, while Methanobacteriales remained a minimum value. Results showed that the reactor performed an excellent pollutants removal effect because of the function of membranes even at high VLR conditions.

Potential impact of salinity on methane production from food waste anaerobic digestion

Previous studies have demonstrated that the presence of sodium chloride (NaCl) inhibited the production of methane from food waste anaerobic digestion. However, the details of how NaCl affects methane production from food waste remain unknown by now and the efficient approach to mitigate the impact of NaCl on methane production was seldom reported. In this paper, the details of how NaCl affects methane production was first investigated via a series of batch experiments. Experimental results showed the effect of NaCl on methane production was dosage dependent. Low level of NaCl improved the hydrolysis and acidification but inhibited the process of methanogenesis whereas high level of NaCl inhibit both steps of acidification and methanogenesis. Then an efficient approach, i.e. co-digestion of food waste and waste activated sludge, to mitigate the impact of NaCl on methane production was reported. Finally, the mechanisms of how co-digestion mitigates the effect on methane production caused by NaCl in co-digestion system were revealed. These findings obtained in this work might be of great importance for the operation of methane recovery from food waste in the presence of NaCl.

The effect of mixing intensity on the performance and microbial dynamics of a single vertical reactor integrating acidogenic and methanogenic phases in lignocellulosic biomass digestion

The ready formation of scum in vertical reactors has been a bottleneck in the digestion of lignocellulosic materials for biogas production. This study describes a single vertical reactor that integrates the acidogenic and methanogenic phases of this process. The effects of two types of maize stover feedstock (fresh and silage) and two mixing intensities (20 and 70rpm) on methane yield were orthogonally determined. Fresh maize stover yielded approximately 14% more methane than silage maize stover. Mixing at 20rpm contributed to methane yield, while mixing at 70rpm blurred the phase boundary, resulting in accumulation of volatile fatty acids and loss of methanogens. The upper and lower phases clearly constituted a two-phase fermentation system. Clostridiales occupied the acidogenic phase, while the predominant bacteria in the methanogenic phase were Bacteroidetes, Chloroflexi, and Synergistetes. The absolute predominance of Methanosaetaceae clearly demonstrated that aceticlastic methanogenesis was the main route of methane production.