Binary mixtures of alcohol ethoxylates, nonylphenol ethoxylates and pesticides exhibit comparative bioactivity against three pests and toxicological risks to aquatic organisms

Contrasting impacts of mixed nonionic surfactant micelles on plant growth in the delivery of fungicide and herbicide

HYPOTHESIS

Nonionic alkyl ethoxylate surfactants are widely used in agrochemicals to facilitate the permeation of systemic herbicides and fungicides across the plant waxy film. Industrial grade surfactants are often highly mixed and how the mixing affects their interactions with pesticides and wax films remains largely unexplored. A better understanding could enable design of mixed nonionic surfactants for herbicides and fungicides to maximize their efficiency and reduce wastage whilst controlling their impact on plant wax films.

EXPERIMENT

In this study, nonionic surfactants with general structure n-oxyethylene glycol monododecyl ether (C₁₂E_n) were used to form surfactant mixtures with the same average ethoxylate numbers but different hydrophilic-lipophilic balance (HLB) values. Their mixed micellar systems were then used to solubilize a herbicide diuron (DN) and a fungicide cyprodinil (CP), followed by plant wax solubilization upon contact with wax films. These processes were monitored by ¹H NMR and SANS.

FINDING

Pesticide solubilization made surfactant micelles effectively more hydrophobic but subsequent wax dissolution caused pesticide release and the restoration of the micellar amphiphilicity. Nonionic surfactants with lower HLBs form larger nanoaggregates, show enhanced wettability, and have better ability to solubilize and permeate pesticides across the wax film, but may cause significant damage to plant growth. These observations help explain why herbicides applied on weeds would benefit from surfactants with lower HLB values while fungicides require surfactants with HLBs to balance between delivery efficiency and potential phytotoxicity risks.

Co-formulant in a commercial fungicide product causes lethal and sub-lethal effects in bumble bees

Pollinators, particularly wild bees, are suffering declines across the globe, and pesticides are thought to be drivers of these declines. Research into, and regulation of pesticides has focused on the active ingredients, and their impact on bee health. In contrast, the additional components in pesticide formulations have been overlooked as potential threats. By testing an acute oral dose of the fungicide product Amistar, and equivalent doses of each individual co-formulant, we were able to measure the toxicity of the formulation and identify the ingredient responsible. We found that a co-formulant, alcohol ethoxylates, caused a range of damage to bumble bee health. Exposure to alcohol ethoxylates caused 30% mortality and a range of sublethal effects. Alcohol ethoxylates treated bees consumed half as much sucrose as negative control bees over the course of the experiment and lost weight. Alcohol ethoxylates treated bees had significant melanisation of their midguts, evidence of gut damage. We suggest that this gut damage explains the reduction in appetite, weight loss and mortality, with bees dying from energy depletion. Our results demonstrate that sublethal impacts of pesticide formulations need to be considered during regulatory consideration, and that co-formulants can be more toxic than active ingredients.

Tank-mixing adjuvants enhanced the efficacy of fludioxonil on cucumber anthracnose by ameliorating the penetration ability of active ingredients on target interface

In this study, pot and field experiments showed that S903, Hasten and Gemini-31511 can significantly enhanced the control efficacy of fludioxonil on cucumber anthracnose. Then by studying the deposition and penetration interaction between active ingredients and cucumber leaves to revealed how the adjuvants influence the interaction process between pesticide active ingredients and target plants to improve the control efficacy. By analysis the effect of fludioxonil deposition to synergism of adjuvants, indicated that fludioxonil active ingredient deposition caused by adjuvants was not the main factor for the adjuvants synergistic effect. Fludioxonil + S903 yielded the lowest surface tension and contact angle, which also implying the best wetting ability. The mean diameters in Hasten + fludioxonil group were much smaller than those in only fludioxonil group (5.39 μm-90 g a.i. ha^-1, 5.50 μm-180 g a.i. ha^-1), the average particle size only had 3.45 μm (90 g a.i. ha^-1) and 3.94 μm (180 g a.i. ha^-1). And the result of spray droplets was consistent with the particles of fludioxonil crystals observed on glass slides and cucumber leaves. Therefore, S903 improved the penetrability of fludioxonil in the target plants by improving the wetting and dispersion of active ingredients on the target interface. Meantime, Hasten improved the penetrability of fludioxonil in the target plants by decreasing the particle size of active ingredients.

Dissipation kinetics and safety evaluation of pyraclostrobin and its desmethoxy metabolite BF 500-3 in a cucumber greenhouse agroecosystem

Pyraclostrobin (PYR), a fungicide of the strobilurin class, is used to control many different kinds of fungal diseases in greenhouses and on agricultural fields. In the present study, an efficient method was established for simultaneously determining PYR and its metabolite BF 500-3 in cucumber fruits, leaves, and soil matrices using QuEChERS pretreatment coupled with ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The residue levels and dissipation kinetics of PYR were determined under greenhouse conditions. The recoveries ranged from 89.8 to 103.6% with relative standard deviations (RSDs) of 3.6-7.5% at three spiking levels. The results demonstrated that PYR dissipated quickly in the cucumber field with half-lives (DT₅₀) of 2.14-4.17 days on different sites and in different matrices. The residue of its metabolite BF 500-3 was very low and showed a trend of first increasing and then decreasing. The degradation rate of PYR in soil was the fastest, followed by that on cucumber fruits and leaves. The terminal residue of PYR at an application rate of 150 g a.i. ha^-1 (the maximum recommended rate) in cucumber fruits was below the maximum residue limit (MRL) of 0.5 mg/kg established in China. However, the application of the fungicide at 225 g a.i. ha^-1 (1.5× the maximum recommended rate) resulted in residues that were above the MRL 1 day after the final application, which is an unacceptable risk. Therefore, the application dosage of PYR at the recommended rates was safe to human beings and animals.

Toxicity testing of pesticides in zebrafish-a systematic review on chemicals and associated toxicological endpoints

The use of zebrafish (Danio rerio) has arisen as a promising biological platform for toxicity testing of pesticides such as herbicides, insecticides, and fungicides. Therefore, it is relevant to assess the use of zebrafish in models of exposure to investigate the diversity of pesticide-associated toxicity endpoints which have been reported. Thus, this review aimed to assess the recent literature on the use of zebrafish in pesticide toxicity studies to capture data on the types of pesticide used, classes of pesticides, and zebrafish life stages associated with toxicity endpoints and phenotypic observations. A total of 352 articles published between September 2012 and May 2019 were curated. The results show an increased trend in the use of zebrafish for testing the toxicity of pesticides, with a great diversity of pesticides (203) and chemical classes (58) with different applications (41) being used. Furthermore, experimental outcomes could be clustered in 13 toxicity endpoints, mainly developmental toxicity, oxidative stress, and neurotoxicity. Organophosphorus, pyrethroid, azole, and triazine were the most studied classes of pesticides and associated with various toxicity endpoints. Studies frequently opted for early life stages (embryos and larvae). Although there is an evident lack of standardization of nomenclatures and phenotypic alterations, the information gathered here highlights associations between (classes of) pesticides and endpoints, which can be used to relate mechanisms of action specific to certain classes of chemicals.

Mixture toxicity of copper and nonylphenol on the embryo-larval development of Rhinella arenarum

Copper and nonylphenol are two commonly found chemicals in the aquatic environment, particularly in the distribution area of the amphibian Rhinella arenarum. The current work evaluated the lethal toxicity of equitoxic and non-equitoxic binary mixtures of copper and nonylphenol on embryos and larvae of the South America toad by means of the standardized test, AMPHITOX. Joint toxicity of mixtures was assessed in several proportions of these compounds at different exposure times and was analyzed at different level of mortality effect (LC10, LC50 and LC90). Considering the LC50, the equitoxic mixture was always antagonistic independently of the exposure time and the developmental stage. Joint toxicity showed mainly an antagonistic pattern; nonetheless, some time-dependent additive interactions were observed. Regarding the LC10, synergistic interactions were found in embryos and larvae exposed to two different mixture proportions at several exposure times. This highlights the possible synergism of these chemicals at environmentally relevant concentrations. These results point out the relevance of assessing joint toxicity of environmental pollutants for environmental risk assessment.

Ecotoxicity and micellization behavior of anionic surfactant sodium dodecylbenzene sulfonate (SDBS) and its mixtures with nonionic surfactant fatty alcohol-polyoxyethylene ether (AEO)

Surfactant mixtures have extensive industrial applications due to their ideal properties and low ecotoxicity. However, the ecotoxicity of surfactant mixtures with different proportions and their correlation with surface properties have remained poorly investigated. In this study, the ecotoxicity and surface activity of the composites of anionic surfactant sodium dodecylbenzene sulfonate (SDBS) and nonionic surfactant fatty alcohol-polyoxyethylene ether (AEO) in various mass ratios were assessed, and the correlation between ideal application properties and safe ecological perspective of the composites was explored. The ecotoxicity of individual SDBS, AEO, and SDBS/AEO mixtures was determined using the bioluminescence inhibition assay with Photobacterium phosphoreum, and the critical micelle concentrations (CMC) were measured by surface tension method and steady-state fluorescence spectroscopy. Sodium dodecylbenzene sulfonate (SDBS) showed a considerably higher toxicity than individual AEO and SDBS/AEO mixtures. Scanning electron microscope images illustrated the rupture of bacteria membrane induced by SDBS, and the addition of AEO alleviated the damage. According to the dose-response relationship on luminous bacteria, SDBS/AEO mixtures were divided into three groups (group I with a high proportion of SDBS, SDBS:AEO = 4:1 and 3:2; group II, SDBS:AEO = 1:1; group III with a high proportion of AEO, SDBS:AEO = 2:3 and 1:4). The sequence of toxicity of the SDBS/AEO mixtures was group II > group III > group I, demonstrating that the toxicity of the composites was related to the mixture proportion instead of the amount of AEO added. The CMC order of SDBS/AEO mixtures was group II > group I > group III, and it was proportion dependent. Furthermore, ΔC^M was defined as the difference of the experimental (C^M) and ideal CMC (C^Mi_deal) of the mixed system, indicating the interaction between the two kinds of surfactants. The order of the ΔC^M was group II > group III > group I, which was consistent with the sequence of the toxicity. Therefore, ΔC^M can be a potential indicator for the hazardous assessment of surfactant mixtures involving high ionic strength.

Selection of organosilicone surfactants for tank-mixed pesticides considering the balance between synergistic effects on pests and environmental risks

In this study, the bioactivities of binary mixtures of organosilicone surfactants and indoxacarb against two Lepidopteran pests were investigated along with their environmental risks. All of the tested organosilicone surfactants had obvious synergistic effects on the contact toxicity of indoxacarb against Spodoptera exigua and Agrotis ipsilon. However, all of the organosilicone surfactants exhibited certain antagonism for indoxacarb against S. exigua in terms of stomach & contact toxicity; both Silwet-408 and Silwet-806 exhibited additivity against A. ipsilon, whereas Silwet-618 and Silwet-DRS-60 exhibited synergism and slight antagonism, respectively. All of the tested chemicals were highly toxic to Daphnia magna, among which Silwet-DRS-60 had the lowest acute toxicity (EC₅₀ of 94.91 μg/L). However, these chemicals were less toxic to Brachydanio rerio. Silwet-DRS-60 had a low toxicity to B. rerio, while Silwet-408, Silwet-806 and Silwet-618 were moderately toxic to B. rerio. For the joint toxicity evaluation of organosilicone surfactants and indoxacarb to D. magna and B. rerio, the additive index method, concentration addition method and toxicity unit method were robust in judging synergism or antagonism, whereas other methods were more conservative; the V-value method and equilibrium curve method exhibited high robustness and viability in evaluating the combined effects of binary mixtures. Overall, we should carefully select organosilicone surfactants for premixed or tank-mixed pesticides in agriculture to obtain a balance between synergistic effects on pests and environmental risks.