Assessment of leachates from reactive fire-retardant coatings by chemical analysis and ecotoxicity testing

Eco-toxicity assessment of industrial by-product-based alkali-activated binders using the sea urchin embryogenesis bioassay

New cement-based materials such as alkali-activated binders (AABs) or geopolymers allow the incorporation of waste or industrial by-products in their formulation, resulting an interesting valorization technique. Therefore, it is essential to inquire about the potential environmental and health impacts throughout their life cycle. In the European context, a minimum aquatic toxicity tests battery has been recommended for construction products, but their potential biological effects on marine ecosystems have not been considered. In this study, three industrial by-products, PAVAL® (PV) aluminum oxide, weathered bottom ash (WBA) resulting from incinerator bottom ash and glass cullet recycling waste (CSP), were evaluated as precursors in the AAB formulation from an environmental point of view. To determine the potential effects on marine environment caused by the leaching of contaminants from these materials into seawater, the leaching test EN-12457-2 and an ecotoxicity test using the model organism sea urchin Paracentrotus lividus were conducted. The percentage of abnormal larval development was selected as endpoint of the toxicity test. Based on the results obtained from the toxicity tests, AABs have less damaging impact (EC₅₀ values: 49.2%-51.9%) on the marine environment in general than raw materials. The results highlight the need to stablish a specific battery of toxicity tests for the environmental assessment of construction products on marine ecosystem.

Environmental Impact of Construction Products on Aquatic Systems—Principles of an Integrated Source–Path–Target Concept

Buildings exposed to water can release undesirable substances which, once transported to environmental compartments, may cause unwanted effects. These exposure pathways need to be investigated and included in risk assessments to safeguard water quality and promote the sustainability of construction materials. The applied materials, exposure conditions, distribution routes and resilience of receiving compartments vary considerably. This demonstrates the need for a consistent concept that integrates knowledge of emission sources, leaching processes, transport pathways, and effects on targets. Such a consistent concept can serve as the basis for environmental risk assessment for several scenarios using experimentally determined emissions. Typically, a source–path–target concept integrates data from standardized leaching tests and models to describe leaching processes, the distribution of substances in the environment and the occurrence of substances at different points of compliance. This article presents an integrated concept for assessing the environmental impact of construction products on aquatic systems and unravels currently existing gaps and necessary actions. This manuscript outlines a source–path–target concept applicable to a large variety of construction products. It is intended to highlight key elements of a holistic evaluation concept that could assist authorities in developing procedures for environmental risk assessments and mitigation measures and identifying knowledge gaps.

Chemicals of concern in construction and demolition waste fine residues: A systematic literature review

Despite the increasing use of chemical additives in construction and their potential threat to the environment and human health, many C&DW studies lack a comprehensive view of chemicals of concern (COC) in C&DW. This study systematically reviewed published studies from 2010 to August 2021 using a keyword search methodology to explore COC in C&DW fine residues based on 73 articles identified from 5 prominent databases. Results show that trace/heavy metals (As, Cr, Cu, Cd, and Pb) as well as high concentrations of toxic gasses (methane, hydrogen sulphide and mercury vapour) have been reported in landfills. Besides, organic chemicals such as polycyclic aromatic hydrocarbons, polychlorinated biphenyls, and brominated flame retardants have been found in landfill leachates in the Netherlands and widely detected in landfill leachates in Sweden, Japan, and Canada. The potential of these contaminants to cause health complications has also been reported. Carcinogenicity, liver and kidney damage, cumulative damage, neurological disorders and foetal damage were reported as associated health implications of exposure to COC from C&DW. A waste disposal lens was used to explore the factors that influence the environment and human health impacts (pH, gypsum and organic content, size fraction, atmospheric exposure and liquid infiltration rate). Despite environmental and health issues relating to C&DW fine residues, the ultimate destination for C&DW fine residues remains in general landfills. Although significant efforts in managing C&DW have been implemented at various levels, those specifically targeting C&DW fine residues remain sparse.

Using Environmental Simulations to Test the Release of Hazardous Substances from Polymer-Based Products: Are Realism and Pragmatism Mutually Exclusive Objectives?

The potential release of hazardous substances from polymer-based products is currently in the focus of environmental policy. Environmental simulations are applied to expose such products to selected aging conditions and to investigate release processes. Commonly applied aging exposure types such as solar and UV radiation in combination with water contact, corrosive gases, and soil contact as well as expected general effects on polymers and additional ingredients of polymer-based products are described. The release of substances is based on mass-transfer processes to the material surfaces. Experimental approaches to investigate transport processes that are caused by water contact are presented. For tailoring the tests, relevant aging exposure types and release quantification methods must be combined appropriately. Several studies on the release of hazardous substances such as metals, polyaromatic hydrocarbons, flame retardants, antioxidants, and carbon nanotubes from polymers are summarized exemplarily. Differences between natural and artificial exposure tests are discussed and demonstrated for the release of flame retardants from several polymers and for biocides from paints. Requirements and limitations to apply results from short-term artificial environmental exposure tests to predict long-term environmental behavior of polymers are presented.