Lanthanum ions decorated 2-dimensional g-C3N4 for ciprofloxacin photodegradation

Photo-induced degradation of toxic recalcitrant compounds from surface water: Insights into advanced nanomaterials, hybrid photocatalytic systems, and real applications

The rapid increase in toxic recalcitrant organic compounds (ROCs) from various industrial, residential, and agricultural sources poses a significant public health concern and threatens environmental preservation. The presence of these toxic ROCs weakens the effectiveness of conventional water and wastewater treatment systems. As a result, numerous physicochemical and biological treatment processes have been explored, each demonstrating varying removal efficiencies depending on experimental conditions. Given the limitations of existing treatment methods, research has increasingly focused on advanced oxidation processes, particularly photocatalysis. Photocatalysis is a prominent treatment technique due to its low sludge production, non-toxic nature, reusable characteristics, and ability to harness visible light. This review comprehensively examines the ecotoxicological effects of ROCs, existing biological and physicochemical treatment methods, advancements in photocatalyst synthesis, the transition from conventional to advanced photocatalysts, and hybrid treatment systems. In the context of photocatalytic removal of ROCs, the review also addresses several influencing parameters, including initial pollutant concentration, solution pH, light intensity, catalyst dose, and catalyst type. Global case studies focusing on the mechanisms of photocatalytic degradation of ROCs are highlighted. The documented photocatalysts for removing ROCs from water and wastewater have shown promising results. Moreover, integrating photocatalysis with advanced physicochemical and biological processes has effectively removed various dissolved (e.g., ROCs) and suspended impurities, showcasing its practical applications. Thus, this study could serve as a valuable resource for researchers and engineers working on the treatment of various micropollutants, such as ROCs, in real wastewater.

Fabrication of 2D/2D Bi2MoO6/Sx@g-C3N(4-y) type-II heterojunction photocatalyst for enhanced visible-light-mediated degradation of tetracycline in wastewater

Aquatic biota and human health are seriously threatened by the dramatic rise in antibiotics in environmental matrices. In this regard, the present study aims to improve knowledge of the combined effects of heterojunction design and defect engineering on the photocatalytic degradation of pharmaceuticals in aqueous matrices. Advantageously, the positioning of the valence band (VB) and conduction band (CB) levels of Sx@g-C3N(4-y), being higher than those of Bi2MoO6, demonstrates the feasibility of forming a type-II heterojunction between these materials. Initially, S and N defects were inserted in S-doped g-C3N4 through an alkali-assisted calcination method (referred to as Sx@g-C3N(4-y)), as affirmed by the reduced concentrations of S and N in the end product. Thereafter, the Bi2MoO6/Sx@g-C3N(4-y) photocatalysts (referred to as BSxNy) were synthesized via a solvothermal method followed by calcination. Among the prepared samples, the integration of 10% Sx@g-C3N(4-y) with Bi2MoO6 (referred to as BSxNy (II)) demonstrated superior photocatalytic performance. Under optimal conditions, BSxNy (II) achieved a remarkable 92.4% degradation efficiency of tetracycline (TCL) in an aqueous solution after 60 min. The degradation rate of BSxNy (II) transcended that of pristine Sx@g-C3N(4-y) and Bi2MoO6 by 4.86 and 3.41 times, respectively. The higher number of active sites and the greater electron-hole pair separation are responsible for this improvement in the rate of TCL degradation. The photocatalyst also exhibited remarkable thermal/chemical stability and possessed reusability, as noted by 84% TCL degradation TCL up to 5 cycles. The radical scavenging experiment indicated O2˙- as the primary contributor towards TCL degradation, with h+ and ˙OH playing a secondary role. Additionally, a seed germination experiment used to measure phytotoxicity determined that the treated effluent was non-phytotoxic, making it suitable for irrigation.

Gd3+ Encapsulation on 2D-g-C3N4 Nanostructure for Spintronics and Ultrasound Assisted Photocatalytic Applications: First-Principles and Experimental Studies

Atomically thin two-dimensional (2D) semiconductors have high potential in optoelectronics and magneto-optics appliances due to their tunable band structures and physicochemical stability. The work demonstrates that Gd3+ incorporated 2D-g-C3N4 nanosheet (Gd3+/2D-g-C3N4 NS) is synthesized through chemisorption methodology for defect enrichment. The material characterizations reveal that the ion decoration enhances the surface area and defect concentration of the 2D sheet. The experimental observations have been further corroborated with the help of density functional theory (DFT) simulation. Spin asymmetry polarizations near the Fermi level, obtained through the partial density of states (PDOS) analyses, reveal the magnetic nature of the synthesized material, validating the room temperature ferromagnetism obtained through a vibrating-sample magnetometer (VSM). Gd3+/2D-g-C3N4 NS shows significant enhancement in saturation magnetization (Ms) experimentally and computationally compared to the pristine one. The magnetic catalyst shows 98% remediation efficiency for ultrasound-assisted visible-light-driven photodegradation of methyl orange (MO). The synergistic approach of liquid chromatography-mass spectrometry (LC-MS) analyses and DFT studies elucidates reaction intermediates and unveils the degradation mechanism. Post-characterization studies assure the stability of the magnetic catalyst through optical, chemical, magnetic, and microscopic analyses. So, the synthesized material can be proficiently used as a magnetic nanocatalyst in wastewater treatments and spin-electronics applications.

Influence of gadolinium doping on structural, optical, and electronic properties of polymeric graphitic carbon nitride

Polymeric graphitic carbon nitride (gCN) materials have received great attention in the fields of photo and electrocatalysis due to their distinct properties in metal-free systems with high physicochemical stability. Nevertheless, the activity of undoped gCN is limited due to its relatively low specific surface area, low conductivity, and poor dispersibility. Doping Gd atoms in a gCN matrix is an efficient strategy to fine-tune its catalytic activity and its electronic structure. Herein, the influence of various wt% of gadolinium (Gd) doped in melon-type carbon nitride was systematically investigated. Gadolinium-doped graphitic carbon nitride (GdgCN) was synthesized by adding gadolinium nitrate to dicyandiamide during polymerization. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) results revealed that the crystallinity and the morphological properties are influenced by the % of Gd doping. Furthermore, X-ray photoelectron spectroscopy (XPS) studies revealed that the gadolinium ions bonded with nitrogen atoms. Complementary density functional theory (DFT) calculations illustrate possible bonding configurations of Gd ions both in bulk material and on ultrathin melon layers and provide evidence for the corresponding bandgap modifications induced by gadolinium doping.

Dimensionality effects of g-C3N4 from wettability to solar light assisted self-cleaning and electrocatalytic oxygen evolution reaction

Unique interfacial properties of 2D materials make them more functional than their bulk counterparts in a catalytic application. In the present study, bulk and 2D graphitic carbon nitride nanosheet (bulk g-C₃N₄ and 2D-g-C₃N₄ NS) coated cotton fabrics and nickel foam electrode interfaces have been applied for solar light-driven self-cleaning of methyl orange (MO) dye and electrocatalytic oxygen evolution reaction (OER), respectively. Compared to bulk, 2D-g-C₃N₄ coated interfaces show higher surface roughness (1.094 > 0.803) and enhanced hydrophilicity (θ ∼ 32° < 62° for cotton fabric and θ ∼ 25° < 54° for Ni foam substrate) due to oxygen defect induction as confirmed from morphological (HR-TEM and AFM) and interfacial (XPS) characterizations. The self-remediation efficiencies for blank and bulk/2D-g-C₃N₄ coated cotton fabrics are estimated through colorimetric absorbance and average intensity changes. The self-cleaning efficiency for 2D-g-C₃N₄ NS coated cotton fabric is 87%, whereas the blank and bulk-coated fabric show 31% and 52% efficiency. Liquid Chromatography-Mass Spectrometry (LC-MS) analysis determines the reaction intermediates for MO cleaning. 2D-g-C₃N₄ shows lower overpotential (108 mV) and onset potential (1.30 V) vs. RHE for 10 mA cm^-2 OER current density in 0.1 M KOH. Also, the decreased charge transfer resistance (R_CT = 12 Ω) and lower Tafel's slope (24 mV dec^-1) of 2D-g-C₃N₄ make it the most efficient OER catalyst over bulk-g-C₃N₄ and state-of-the-art material RuO₂. The pseudocapacitance behavior of OER governs the kinetics of electrode-electrolyte interaction through the electrical double layer (EDL) mechanism. The 2D electrocatalyst demonstrates long-term stability (retention ∼94%) and efficacy compared to commercial electrocatalysts.

Lithium and phosphorus-functionalized graphitic carbon nitride monolayer for efficient hydrogen storage: A DFT study

We have explored the consequence of lithium and phosphorous functionalization on the graphitic carbon nitride (g-C₃N₄) monolayer for hydrogen storage using density functional theory. Both pristine and Li and P decorated g-C₃N₄ show a semiconductor nature. The substantial overlap between the s orbital of Li and the p orbital of nitrogen near the Fermi level shows the binding between Li and the g-C₃N₄. The repositioning of HOMO and LUMO is noticed in the Li and P decorated g-C₃N₄. The Bader charge analysis indicates the charge allocation from the Li and P atom to the g-C₃N₄, which results in the adsorption of H₂ by electrostatic interaction. The hydrogen storage capacity of 5.78 wt% is obtained after functionalizing Li and P into the g-C₃N₄. The obtained adsorption energies for the H₂ adsorption and the H₂ desorption temperature confirm that Li and P functionalized g-C₃N₄ is a fascinating candidate for the reversible loading of H₂ at ambient conditions.

A facile and green synthesis of Mn and P functionalized graphitic carbon nitride nanosheets for spintronics devices and enhanced photocatalytic performance under visible-light

Manganese and phosphorus co-doped, graphitic carbon nitride (g-C₃N₄) nanosheet (Mn/P-g-C₃N₄) is prepared by facile and green calcination process of melamine (C₃H₆N₆), manganese chloride tetrahydrate (MnCl₂·4H₂O), and ammonium dihydrogen phosphate ((NH₄)H₂PO₄). The Mn/P co-doping significantly enhances magnetic values compared to pristine-g-C₃N₄, phosphorus-doped g-C₃N₄ (P-g-C₃N₄), and manganese-doped g-C₃N₄ (Mn-g-C₃N₄). We find that Mn/P-g-C₃N₄ is a half-metallic ferromagnetic material having a magnetic moment and Curie temperature of 4.51 μ_B and ∼ 800 K, respectively. The ultraviolet-visible (UV-vis) absorption spectrum of Mn/P-g-C₃N₄ reveals superior absorption in broader wavelength compared to pristine-g-C₃N₄, P-g-C₃N₄, and Mn-g-C₃N₄. The methyl orange degradation efficiency of Mn/P-g-C₃N₄ photocatalyst is 94 %, which is three times more than that of pristine-g-C₃N₄ (29 %) and more significant than the P-g-C₃N₄ (46 %) and Mn-g-C₃N₄ (58 %). Furthermore, density functional theory (DFT) calculation explains the origin of high magnetic behavior, the boosted photocatalytic efficiency of Mn/P-g-C₃N₄, and the essential material properties like structure, bandgap, the density of states (DOS), and atomic level interaction. This work may be helpful for reasonably designing ferromagnetic material for spintronics devices and boosting visible-light (VL) photocatalytic performance for environmental remediation.

Optoelectronic investigation and spectroscopic characteristics of polyamide-66 polymer

A semi-crystalline designated nylon 66 polymer is a crucial, high-performance engineering material that is used in wide variety of industrial applications including sensors, electrical insulators, electronic devices, and automotive sector. Using modules based on density functional theory and finite-field approaches, this work explores the optoelectronic and spectroscopic characteristics of this polymer. Absorption, dielectric function, refractive index, and optical conductivity are the principle topics of this study. The effects indicated that nylon 66 is a first-rate insulator and the degree of crystallinity estimated is 46.44%. The simulated bandgap vs. the Tauc relation value is greater than 7.0 eV and has a proportional inaccuracy of 2.36%. Absorption coefficient value, however, suggests that while the refractive index and dielectric function remain stable, the optical conductivity is elevated. In order to determine the advantages appropriate for many applications, this research develops a strong basis and perception of the linear and nonlinear optical properties of nylon 66.

Degradation of ciprofloxacin by persulfate activated with pyrite: mechanism, acidification and tailwater reuse

Residues of ciprofloxacin (CIP) in the environment pose a threat to human health and ecosystems. This study investigated the degradation of CIP by persulfate (PS) activated with pyrite (FeS2). Results showed that when [CIP] = 30 μM, [FeS2] = 2.0 g L-1, and [PS] = 1 mM, the CIP removal rate could reach 94.4% after 60 min, and CIP mineralization rate reached 34.9%. The main free radicals that degrade CIP were SO4˙- and HO˙, with contributions of 34.4% and 35.7%, respectively. Additionally, compared to the control (ultrapure water), CIP in both tap water and river water was not degraded. However, acidification could eliminate the inhibition of CIP degradation in tap water and river water. Furthermore, acidic tailwater from CIP degradation could be utilized to adjust the pH of untreated CIP, which could greatly promote the degradation of CIP and further reduce disposal costs. The reaction solution was not significantly biotoxic and three degradation pathways of CIP were investigated. Based on the above results and the characterization of FeS2, the mechanism of CIP degradation in the FeS2/PS system was that FeS2 activated PS to generate Fe(iii) and SO4˙-. The sulfide in FeS2 reduced Fe(iii) to Fe(ii), thus achieving an Fe(iii)/Fe(ii) cycle for CIP degradation.

High Photocatalytic Activity of g-C3N4/La-N-TiO2 Composite with Nanoscale Heterojunctions for Degradation of Ciprofloxacin

Ciprofloxacin (CIP) in natural waters has been taken as a serious pollutant because of its hazardous biological and ecotoxicological effects. Here, a 3D nanocomposite photocatalyst g-C₃N₄/La-N-TiO₂ (CN/La-N-TiO₂) was successfully synthesized by a simple and reproducible in-situ synthetic method. The obtained composite was characterized by XRD, SEM, BET, TEM, mapping, IR, and UV-vis spectra. The photocatalytic degradation of ciprofloxacin was investigated by using CN/La-N-TiO₂ nanocomposite. The main influential factors such as pH of the solution, initial CIP concentration, catalyst dosage, and coexisting ions were investigated in detail. The fastest degradation of CIP occurred at a pH of about 6.5, and CIP (5 mg/L starting concentration) was completely degraded in about 60 min after exposure to the simulated solar light. The removal rates were rarely affected by Na⁺ (10 mg·L⁻¹), Ca²⁺ (10 mg·L⁻¹), Mg²⁺ (10 mg·L⁻¹), and urea (5 mg·L⁻¹), but decreased in the presence of NO₃⁻ (10 mg·L⁻¹). The findings indicate that CN/La-N-TiO₂ nanocomposite is a green and promising photocatalyst for large-scale applications and would be a candidate for the removal of the emerging antibiotics present in the water environment.

Photocatalytic performance of 3D engineered chitosan hydrogels embedded with sulfur-doped C3N4/ZnO nanoparticles for Ciprofloxacin removal: Degradation and mechanistic pathways

Ciprofloxacin, a biotoxic micropollutant, is ubiquitously found in the water environment, which is a global concern. This study developed polymeric S-C3N4/ZnO-Chitosan (indexed as SCZ-CH) hydrogels for degrading Ciprofloxacin. The SCZ-CH hydrogels provided the Ciprofloxacin degradation efficiencies of ~93% and ~69% in UV and visible lights, respectively, at optimum conditions (SCZ-CH hydrogels with 2 g/L SCZ, 20 mg/L initial concentration, pH 5, and room temperature). In addition, immobilized SCZ-CH hydrogels structures enable easy separation of the SCZ catalyst from water. The spectroscopic and microscopic analyses of SCZ-CH hydrogels show multifaceted properties, like high oxygen concentrations, crystallinity, stacked structure, high roughness, and improved bandgap energy, which are responsible for the enhanced photocatalytic activity. The effects of water matrix and experimental conditions on Ciprofloxacin degradation were also studied, which suggested that the catalyst dose and solution pH have significant effects on photocatalytic activity. SCZ-CH hydrogels have shown good mineralization efficiency (~98%) and reusability (up to 10 cycles) for Ciprofloxacin removal. Superoxide radicals played an essential role in the degradation of Ciprofloxacin. The Ciprofloxacin molecules get degraded by driving radicals through oxidation, defluorination, substitution, and breaking of the rings. The proposed SCZ-CH hydrogels can be effectively used at a large scale to treat micropollutants.

Amperometric detection of antibiotic drug ciprofloxacin using cobalt-iron Prussian blue analogs capped on carbon nitride

Ciprofloxacin (CIP) electrochemical sensor was constructed using cobalt-iron Prussian blue analogs decorated on carbon nitride (Co-Fe-PBA@CN). Co-Fe-PBA decorated on CN was fabricated using a simple sonication-assisted hydrothermal method to prepare the composite to obtain a cube-shaped structure decorated on CN sheets. The fabricated Co-Fe-PBA@CN was physically characterized using XRD and SEM analysis. Then, the fabricated composite was electrochemically studied to sense antibiotic drug ciprofloxacin (CIP). The electrochemical behavior was investigated using tools such as cyclic voltammetry (CV) and amperometric I-t studies. The Co-Fe-PBA@CN modified electrode displays a wide linear range (0.005-300 and 325-741 μM) with a low detection limit (0.7389 and 1.0313 nM) and good sensitivity (0.3157 and 0.2263 μA.μM^-1cm^-2) toward CIP. The Co-Fe-PBA@CN modified electrode also exhibits good selectivity, reproducibility, and repeatability toward CIP. The proposed sensor was validated with real sample analysis, biological samples like urine and blood serum containing commercially available ciprofloxacin tablets were studied, and the results demonstrate good viability.

Element-doped graphitic carbon nitride: confirmation of doped elements and applications

Doping is widely reported as an efficient strategy to enhance the performance of graphitic carbon nitride (g-CN). In the study of element-doped g-CN, the characterization of doped elements is an indispensable requirement, as well as a huge challenge. In this review, we summarize some useful characterization methods which can confirm the existence and chemical states of doped elements. The advantages and shortcomings of these characterization methods are discussed in detail. Various applications of element-doped g-CN and the function of doped elements are also introduced. Overall, this review article aims to provide helpful information for the research of element-doped g-CN.