Efficient electrocatalysis for denitrification by using TiO2 nanotube arrays cathode and adding chloride ions

Study on the adsorption mechanism of CL-20 in waste acid by silicic acid: adsorption model and DFT calculation

Industrial wastewater pollution has emerged as a significant global environmental challenge, particularly regarding the urgent need to address highly acidic industrial effluents containing organic pollutants. As a novel high-energy explosive, hexanitrohexaazaisowurtzitane (CL-20) inevitably generates strongly acidic wastewater during its production and application processes, posing severe threats to ecological systems and human health. This study systematically investigates the adsorption performance of two silicon-based materials, sodium silicate (Na2SiO3) and silicic acid (H2SiO3), for the removal of CL-20 from wastewater. Experimental results demonstrate that the Langmuir isotherm model reveals maximum adsorption capacities of 87.21 and 69.97 mg/g for H2SiO3 and Na2SiO3, respectively. Kinetic studies indicate that the adsorption processes of both materials conform to the pseudo-second-order kinetic model (R2 > 0.98). Thermodynamic parameter analysis demonstrates reduced spontaneity of the adsorption process with increasing temperature, accompanied by exothermic characteristics and entropy reduction. Through density functional theory (DFT) calculations, the mechanisms underlying electrostatic adsorption and chemical bonding interactions between CL-20 molecules and silicon-based materials are elucidated. This research establishes a novel technical approach for efficient CL-20 wastewater treatment while providing theoretical foundations for developing and optimizing related adsorption materials.

A novel Cu/Fe cathode prepared by a facile redox pathway for phenol degradation electrocatalytically via the electro-fenton assisted electro-chlorination process

Electrochemical methods for treating phenolic wastewater have been widely studied, with most research focusing primarily on the anode, while the cathode has generally served as a counter electrode. This study aims to enhance the electrocatalytic process by developing a new Fe/Cu-based cathode using a simple redox method. We created a CuOCu@Fe-Fe2O3-x (0 < x < 1, combining Fe2O3 and FeO) electrode, referred to as CCFFO, to facilitate the electro-Fenton process without requiring additional H2O2 or Fe2+. In our electrolysis system with NaCl as the electrolyte for electro-chlorination process, phenol concentration was reduced from 100 mg/L to below 0.5 mg/L within 10 min. Optimal experimental conditions were determined by evaluating various parameters such as chloride electrolyte concentration, current density, electrode plate spacing, aeration, pH, and cathode types. Additionally, the role of chloride ions in phenol degradation was investigated through free radical quenching experiments. A 500-hour continuous flow experiment demonstrated the durability of the CCFFO cathode. GC/MS analysis identified intermediates formed during phenol degradation and the underlying catalytic mechanism was explored. The results indicate that the electro-chlorination process at the anode is the primary driver of phenol degradation, assisted by the electro-Fenton process on the CCFFO cathode. The CCFFO cathode effectively prevents the production of harmful by-products like perchlorate. The degradation efficiencies of chemical oxygen demand (COD) and total organic carbon (TOC) were 63.5 % and 80.25 %, respectively. Achieving a phenol degradation efficiency of 99.5 % within 10 min, the CCFFO cathode and electrolytic system show significant potential for wastewater treatment applications.

Preparation of Ti/SnO2-Sb2O4-La Electrode with TiO2 Nanotubes Intermediate Layer and the Electrochemical Oxidation Performance of Rhodamine B

A La-doped Ti/SnO2-Sb2O4 electrode with TiO2-NTs intermediate layer (Ti/TiO2-NTs/SnO2-Sb2O4-La) was created via the electrodeposition technique. The physicochemical and electrochemical properties of the electrode were analyzed through FESEM, XRD, XPS, CV, and LSV electrochemical tests. The results showed that TiO2-NTs were tightly packed on the surface of Ti substrate, thus improving the binding force of the SnO2-Sb2O4-La coating, offering greater specific surface area, more active spots, higher current response, and longer lifespan for the degradation of rhodamine B. The lifespan of the Ti/TiO2-NTs/SnO2-Sb2O4-La electrode reached 200 min (1000 mA cm-2, 1 M H2SO4), while the actual service life was up to 3699 h. Under the conditions of initial pH 3.0, Na2SO4 concentration of 0.1 M, current density of 30 mA cm-2, and initial rhodamine B concentration of 20 mg L-1, the color and TOC removal rate of rhodamine B reached 100% and 86.13% within 15 and 30 min, respectively. Rhodamine B was decomposed into acids, esters, and other molecular compounds under the action of •OH and SO4•- free radicals and electrocatalysis, and finally completely mineralized into CO2 and H2O. It is anticipated that this work will yield a novel research concept for producing DSA electrodes with superior catalytic efficacy and elevated stability.

Rational design of electrocatalytic system to selective transform nitrate to nitrogen

Nitrate (NO3-) is one of the most common pollutants in natural bodies of water and as such threatens both human health and the safety of aquatic environment. There are efficient electrochemical techniques to directly remove NO3-, but inexpensive, selective and electrocatalytic strategies to eliminate NO3- by converting it into benign nitrogen (N2) remain challenging. This work studied Cu particles that were formed directly on a Ni foam (Cu-NF) and evaluated their electrocatalytic NO3- reduction performance. The use of carbon nanotubes (CNT) functionalized with titanium suboxides (TiSO) as the anode facilitated the generation of active chlorine species that had a key role in the removal of NH4+. An electrochemical system that integrated a Cu-NF cathode with a TiSO-CNT anode could remove 88.5% of NO3- with a >99% N2 selectivity when operated over 6 h (4.1 × 10-4 h-1) at a potential of -1.2 V vs Ag/AgCl. Because the chloride ions are very common in natural sources of water, this technique offers a sustainable and environmentally friendly approach for the removal of NO3- from contaminated water sources.

Fabrication of a SnO2-Sb electrode with TiO2 nanotube array as the middle layer for efficient electrochemical oxidation of amaranth dye

Efficient, stable, and easily producible electrodes are useful for treating dye wastewater through electrochemical oxidation. In this study, an Sb-doped SnO₂ electrode with TiO₂ nanotubes as the middle layer (TiO₂-NTs/SnO₂-Sb) was prepared through an optimized electrodeposition process. Analyses of the coating morphology, crystal structure, chemical state, and electrochemical properties revealed that tightly packed TiO₂ clusters provided a larger surface area and more contact points, which is conducive to reinforcing the binding of SnO₂-Sb coatings. Compared with a Ti/SnO₂-Sb electrode without a TiO₂-NT interlayer, the catalytic activity and stability of the TiO₂-NTs/SnO₂-Sb electrode significantly improved (P < 0.05), as reflected by the 21.8% increase in the amaranth dye decolorization efficiency and 200% increase in the service life. The effects of current density, pH, electrolyte concentration, initial amaranth concentration, and the interaction between various combinations of parameters on the electrolysis performance were investigated. Based on response surface optimization, the maximum decolorization efficiency of the amaranth dye could reach 96.2% within 120 min under the following set of optimized parameter values: 50 mg L^-1 amaranth concentration, 20 mA cm^-2 current density, and 5.0 pH. A potential degradation mechanism of the amaranth dye was proposed based on the experimental results of a quenching test, ultraviolet-visible spectroscopy, and high-performance liquid chromatography-mass spectrometry. This study provides a more sustainable method for fabricating SnO₂-Sb electrodes with TiO₂-NT interlayers to treat refractory dye wastewater.

Complexation modelling and oxidation mechanism of organic pollutants in cotton pulp black liquor during iron salt precipitation and electrochemical treatment

Removal behavior of organic pollutants such as lignin in cotton pulp black liquor (CPBL) was investigated in precipitation followed by electrochemical oxidation (EO) using FeCl₃, Fe₂(SO₄)₃, FeCl₂ and FeSO₄ as precipitants, electrolyte and catalysts. Based on comparison of precipitation efficacy of iron salts, spectroscopic techniques, thermodynamic equilibrium calculations and molecular dynamics (MD) simulations were used to provide insight into the interaction between iron cations and lignin. The results showed that FeCl₃ achieved the highest removal of chemical oxygen demand (COD, 76.05%), UV₂₅₄ (69.21%) and lignin (78.28%). Iron cationic complexation with lignin was identified as the key mechanism in precipitation. Fe³⁺ was more active in binding to organic ligands mainly due to charge effect compared to Fe²⁺. The strong Fe-sulphate coordination affected the complexation with lignin. MD simulations showed the formation of inner sphere complexes of iron cations with deprotonated carboxyl and hydroxyl groups via bidentate and monodentate coordination. The removal efficiency of electrochemical oxidation (EO) as a post-treatment of the precipitation was dependent on iron salts. Removals of COD, UV₂₅₄ and color can achieve 98.88%, 98.9% and 99.97% by FeCl₃ precipitation and EO processes. The effluent reached the primary discharge standard specified in Integrated Wastewater Discharge Standard of China (GB8978-1996). FeCl₃ demonstrated significant advantages in the removal of organic pollutants from cotton pulp black liquor in the combined process of precipitation and electrochemical treatment and may have practical application potential.

Microwave-Induced Deep Catalytic Oxidation of NO Using Molecular-Sieve-Supported Oxygen-Vacancy-Enriched Fe-Mn Bimetal Oxides

A novel microwave (MW) catalytic oxidation denitrification method was developed, which can deeply oxidize NO into nitrate/nitrite with little NO₂ yield. A molecular-sieve-supported oxygen-vacancy-enriched Fe₂O₃-MnO₂ catalyst (Ov-Fe-Mn@MOS) was fabricated. Physicochemical properties of the catalyst were revealed by various characterization methods. MW irradiation was superior to the conventional heating method in NO oxidation (90.5 vs 70.6%), and MW empowered the catalyst with excellent low-temperature activity (100-200 °C) and good resistance to H₂O and SO₂. Ion chromatography analysis demonstrated that the amount of nitrate/nitrite accounted for over 90.0% of the N products, but the main product gradually varied from nitrate to nitrite as the reaction proceeded because of the switching of the main reaction path of NO removal. Mechanism analyses clarified that NO oxidation was a non-radical catalytic reaction: (i) the chemisorbed NO on ≡Mn(IV) reacted with O₂* to produce nitrate and (ii) the excited NO* due to MW irradiation reacted with the active O* generated from Ov···O₂ to form nitrite. Density functional theory calculations combined with electron paramagnetic resonance tests revealed the promotional effects of Fe₂O₃ in (i) boosting the Ov's quantity; (ii) facilitating O₂ adsorption; (iii) increasing the nitrite formation; and (iv) alleviating the suppression of SO₂.

Treatment of organic wastewater by a synergic electrocatalysis process with Ti3+ self-doped TiO2 nanotube arrays electrode as both cathode and anode

Electrochemical anodic oxidation (AO) is a promising technology for wastewater treatment due to its strong oxidation property and environmental compatibility. However, it suffers from high energy consumption for pollutants removal due to the side-reactions of hydrogen evolution reaction on cathode and oxygen evolution reaction on anode. Combining electro-Fenton (EF) with AO not only generated •OH for pollutants degradation but also increased current efficiency. This work investigated a synergic electrocatalysis process between EF and AO with Ti³⁺ self-doped TiO₂ nanotube arrays (Ti³⁺/TNTAs) electrode as both cathode and anode for wastewater treatment. The pseudo-first-order kinetic rate constant of phenol degradation by EF+AO (0.107 min^-1) was 9.7 or 6.3 times as much as that of only EF (0.011 min^-1) or AO (0.017 min^-1) process, respectively. Enhanced pollutants removal of EF+AO could be attributed to the coexistence of •OH oxidation and direct oxidation on Ti³⁺/TNTAs surface. The COD of secondary effluent of coking wastewater decreased from 159.3 mg L^-1 to 47.0 mg L^-1 by EF+AO within 120 min with low specific energy consumption (9.5 kWh kg^-1 COD^-1). This work provided a new insight into design of the energy-efficient synergic electrocatalysis process for refractory pollutants degradation.

Preparation of LDO@TiO2 core-shell nanosheets for enhanced photocatalytic degradation of organic pollution

TiO₂-based nanosheet materials with a core-shell structure are expected to be one of the promising photocatalysts for the degradation of organic pollution. It is a challenge to synthesize TiO₂ by the desired nucleation and growth process, so most reported TiO₂ core-shell photocatalysts are prepared using TiO₂ as a core material. Layered double hydroxides (LDHs) are considered ideal platforms to grow TiO₂in situ and further serve as additional components to improve the separation of photogenerated charge carriers. In this work, we report the design and fabrication of anatase TiO₂-coated ZnAl-layered double oxide (LDO@TiO₂) nanosheets, which involve the in situ growth of TiO₂ on ZnAl-LDH followed by subsequent calcination treatment. The resulting LDO@TiO₂ photocatalyst yields typical core-shell nanosheet morphology with a mesoporous structure, exhibiting excellent photodegradation and mineralization efficiency for organic pollution.