The promiscuous potential of cellulase in degradation of polylactic acid and its jute composite

Soil nitrogen deficiency aggravated the aging of biodegradable microplastics in paddy soil under the input of organic substances with contrasting C/N ratios

The application of organic substances to the agricultural field has effectively enhanced soil nutrient levels and crop yields. Biodegradable microplastics (bio-MPs), a pervasive emerging contaminant, may potentially impact the soil ecosystem through their aging process. Here, a 150-day dark incubation experiment was conducted to elucidate the disparities in the aging process of polylactic acid bio-MPs (PLA-MPs) in soils with contrasting C/N ratios of organic substances, as the mechanisms underlying this process remain unclear. The study found that PLA-MPs resulted in an increase in soil pH, nutrient levels, and organic carbon content in soil-straw system. Additionally, PLA-MPs significantly influenced bacterial community composition and microbial metabolic activity in soil-straw system. Notably, more pronounced aging features of PLA-MPs was observed in soil-straw system (lower soil nitrogen environment) compared to soil-fertilizer system (higher soil nitrogen environment). Under lower soil nitrogen conditions, microorganisms may accelerate the aging process of PLA-MPs due to their preference for readily available energy sources; conversely, under higher soil nitrogen conditions, the aging of PLA-MPs may be decelerated as microorganisms preferentially utilize substances with easily accessible energy sources. Our findings provide valuable insights into the interaction between PLA-MPs and soil amended with the organic substances of contrasting C/N ratios.

LPDE biodegradation promoted by a novel additive based on silica nanoparticles: Structural, microbial and ecotoxicological characterization

This study developed a biodegrading additive based on nanosilica and modified by cellulase enzyme in the presence of citric acid and sodium citrate. The additive was tested as a facilitator for biodegradation of the commercial low-density polyethylene (LDPE) in soil. Enzyme immobilization was confirmed by enzymatic assays. Moreover, additive and nanocomposites were characterized by spectroscopic and microscopic techniques. To assess the role of additive in biodegradation, CO2 production in soil was measured at 30 °C for 83 days. Biodegraded nanocomposites were cultivated to isolate possible LDPE-biodegrading microorganisms. Ecotoxicity of the studied materials was evaluated on cucumber (Cucumis sativus L.). CO2 production from LDPE/additive sample was similar to the starch (1055 ± 14 mg and 1078 ± 28 mg, respectively), and higher than pure LDPE (882 ± 34 mg) and LDPE/nanosilica (992 ± 30 mg). Although the presence of LDPE/nanosilica and LDPE/additive led to root length reduction of 24.3 ± 2.3% compared to the control (soil), the accumulation of root biomass was not affected. Furthermore, the nanocomposites did not cause harmful effects on seedling growth. Nine microbial isolates were recovered from biodegraded samples and identified by molecular techniques. It was demonstrated for the first time the LDPE biodegradation potential by four bacterial isolates (Bacillus safensis FO-36b, Lysinibacillus capsici, Bacillus albus N35-10-2 and Bacillus paranthracis Mn5) and two fungal isolates (Cladosporium halotolerans clone EF_526 and Cladosporium sp. MV-2018B isolate MLT-27). Our study sheds light on the biodegradation of commercial LDPE by soil microorganisms using a novel LDPE-biodegrading additive nanocomposite.

Nature's Plastic Predators: A Comprehensive and Bibliometric Review of Plastivore Insects

Unprecedented plastic production has resulted in over six billion tons of harmful waste. Certain insect taxa emerge as potential agents of plastic biodegradation. Through a comprehensive manual and bibliometric literature analysis, this review analyses and consolidates the growing literature related to insect-mediated plastic breakdown. Over 23 insect species, representing Coleoptera, Lepidoptera, and 4 other orders, have been identified for their capacity to consume plastic polymers. Natural and synthetic polymers exhibit high-level similarities in molecular structure and properties. Thus, in conjunction with comparative genomics studies, we link plastic-degrading enzymatic capabilities observed in certain insects to the exaptation of endogenous enzymes originally evolved for digesting lignin, cellulose, beeswax, keratin and chitin from their native dietary substrates. Further clarification is necessary to distinguish mineralisation from physicochemical fragmentation and to differentiate microbiome-mediated degradation from direct enzymatic reactions by insects. A bibliometric analysis of the exponentially growing body of literature showed that leading research is emerging from China and the USA. Analogies between natural and synthetic polymer's degradation pathways will inform engineering robust enzymes for practical plastic bioremediation applications. By aggregating, analysing, and interpreting published insights, this review consolidates our mechanistic understanding of insects as a potential natural solution to the escalating plastic waste crisis.

Enhanced Biodegradation Rate of Poly(butylene adipate-co-terephthalate) Composites Using Reed Fiber

To enhance the degradability of poly(butylene adipate-co-terephthalate) (PBAT), reed fiber (RF) was blended with PBAT to create composite materials. In this study, a fifteen day degradation experiment was conducted using four different enzyme solutions containing lipase, cellulase, Proteinase K, and esterase, respectively. The degradation process of the sample films was analyzed using an analytical balance, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). The PBAT/RF composites exhibited an increased surface hydrophilicity, which enhanced their degradation capacity. Among all the enzymes tested, lipase had the most significant impact on the degradation rate. The weight loss of PBAT and PBAT/RF, caused by lipase, was approximately 5.63% and 8.17%, respectively. DSC analysis revealed an increase in the melting temperature and crystallinity over time, especially in the film containing reed fibers. FTIR results indicated a significant weakening of the ester bond peak in the samples. Moreover, this article describes a biodegradation study conducted for three months under controlled composting conditions of PBAT and PBAT/RF samples. The results showed that PBAT/RF degraded more easily in compost as compared to PBAT. The lag phase of PBAT/RF was observed to decrease by 23.8%, while the biodegradation rate exhibited an increase of 11.8% over a period of 91 days. SEM analysis demonstrated the formation of more cracks and pores on the surface of PBAT/RF composites during the degradation process. This leads to an increased contact area between the composites and microorganisms, thereby accelerating the degradation of PBAT/RF. This research is significant for preparing highly degradable PBAT composites and improving the application prospects of biodegradable green materials. PBAT/RF composites are devoted to replacing petroleum-based polymer materials with sustainable, natural materials in advanced applications such as constructional design, biomedical application, and eco-environmental packaging.

Accelerating the Biodegradation of Poly(lactic acid) through the Inclusion of Plant Fibers: A Review of Recent Advances

As the global demand for plastics continues to grow, plastic waste is accumulating at an alarming rate with negative effects on the natural environment. The industrially compostable biopolymer poly(lactic acid) (PLA) is therefore being adopted for use in many applications, but the degradation of this material is slow under many end-of-life conditions. This Perspective explores the feasibility of accelerating the degradation of PLA through the formation of PLA-plant fiber composites. Topics include: (a) key properties of PLA, plant-based fibers, and biocomposites; (b) mechanisms of both hydrolytic degradation and biodegradation of PLA-fiber composites; (c) end-of-life degradation of PLA and PLA-plant fiber composites in aerobic and anaerobic conditions, relevant to compost, soil and seawater (aerobic), and landfills (anaerobic); and (d) sustainability and environmental impact of PLA and PLA-plant fiber composites, as evaluated using life cycle assessment. Additional degradation modes, including thermal and photodegradation, which are relevant during processing and use, have been omitted for clarity, as have other types of PLA biocomposites. Multiple studies have shown that the addition of some types of plant fibers to PLA (to form PLA biocomposites) accelerates both water transport in the material and hydrolysis, presenting a possible avenue for improving the end-of-life degradation of these materials. To facilitate the continued development of materials with enhanced biodegradability, we identify a need to implement testing protocols that can distinguish between different degradation mechanisms.

A Deep-Sea Bacterium Is Capable of Degrading Polyurethane

Plastic wastes have been recognized as the most common and durable marine contaminants, which are not only found in the shallow water, but also on the sea floor. However, whether deep-sea microorganisms have evolved the capability of degrading plastic remains elusive. In this study, a deep-sea bacterium Bacillus velezensis GUIA was found to be capable of degrading waterborne polyurethane. Transcriptomic analysis showed that the supplement of waterborne polyurethane upregulated the expression of many genes related to spore germination, indicating that the presence of plastic had effects on the growth of strain GUIA. In addition, the supplement of waterborne polyurethane also evidently upregulated the expressions of many genes encoding lipase, protease, and oxidoreductase. Liquid chromatography-mass spectrometry (LC-MS) results showed that potential enzymes responsible for plastic degradation in strain GUIA were identified as oxidoreductase, protease, and lipase, which was consistent with the transcriptomic analysis. In combination of in vitro expression and degradation assays as well as Fourier transform infrared (FTIR) analysis, we demonstrated that the oxidoreductase Oxr-1 of strain GUIA was the key degradation enzyme toward waterborne polyurethane. Moreover, the oxidoreductase Oxr-1 was also shown to degrade the biodegradable polybutylene adipate terephthalate (PBAT) film indicating its wide application potential. IMPORTANCE The widespread and indiscriminate disposal of plastics inevitably leads to environmental pollution. The secondary pollution by current landfill and incineration methods causes serious damage to the atmosphere, land, and rivers. Therefore, microbial degradation is an ideal way to solve plastic pollution. Recently, the marine environment is becoming a hot spot to screen microorganisms possessing potential plastic degradation capabilities. In this study, a deep-sea Bacillus strain was shown to degrade both waterborne polyurethane and biodegradable PBAT film. The FAD-binding oxidoreductase Oxr-1 was demonstrated to be the key enzyme mediating plastic degradation. Our study not only provided a good candidate for developing bio-products toward plastic degradation but also paved a way to investigate the carbon cycle mediated by plastic degradation in deep-sea microorganisms.

Synergistic Mutations Create Bacillus Subtilisin Variants with Enhanced Poly-l-Lactic Acid Depolymerization Activity

Enzymatic recycling of poly-l-lactic acid (PLLA) plastic has recently become an area of interest; however, investigation of enzymatic mechanisms and engineering strategies to improve activity remains limited. In this study, we have identified a subtilisin from Bacillus pumilus that has the ability to depolymerize high-molecular-weight PLLA. We performed a comparative, mutational analysis of this enzyme with a less active homologue from Bacillus subtilis to determine residues favored for activity. Our results demonstrate that both enzymes contain residues favored for PLLA depolymerization, with the generation of several hyperactive variants. In silico modeling suggests that increases in activity are due to opening of the binding pockets and increased surface hydrophobicity. Combinations of hyperactive mutations have synergistic effects with the generation of subtilisin variants with 830- and 184-fold increases in activity for B. subtilis and B. pumilus subtilisins, respectively. One B. pumilus subtilisin variant can visibly dissolve high-molecular-weight PLLA films.