Evaluations of holey graphene oxide modified ultrafiltration membrane and the performance for water purification

Coupling pretreatment of ultraviolet/ferrate (UV/Fe(vi)) for improving the ultrafiltration of natural surface water

Ultrafiltration (UF) is a high-potential technology for purifying natural surface water; however, the problem of membrane fouling has limited its widespread application. Herein, ultraviolet (UV)-activated ferrate (Fe(vi)) was used to purify natural surface water and improve the performance of the UF membrane. The combination of UV and Fe(vi) could generate active species (Fe(v), Fe(iv), ˙OH and O2˙-) to degrade pollutants, while the in situ produced Fe(iii) had the effect of coagulation. With the above action, pollutants were removed, and the pollution load of natural surface water was reduced. After treatment with the UV/Fe(vi) system, dissolved organic carbon was reduced by 49.38%, while UV254 was reduced by 45.00%. The removal rate was further increased to 54.88% and 51.67% after UF treatment. In addition, the fluorescent organics were reduced by 44.22%, and the molecular weight of the organics became smaller. In the stage of UF, the terminal J/J0 was increased from 0.61 to 0.92, and the membrane fouling resistance was decreased by 85.94%. The analysis of the membrane fouling mechanism indicates that the role of cake filtration was weakened among all the mechanisms. Fourier transform infrared spectroscopy showed that less pollutants were accumulated on the membrane surface, and scanning electron microscopy revealed that the membrane pore blockage was relieved. In summary, the UV/Fe(vi) co-treatment process proposed in this study can significantly improve the purification efficiency of the UF systems in natural surface water treatment.

Recent developments in microplastic contaminated water treatment: Progress and prospects of carbon-based two-dimensional materials for membranes separation

Micro (nano)plastics pollution is a noxious menace not only for mankind but also for marine life, as removing microplastics (MPs) is challenging due to their physiochemical properties, composition, and response toward salinity and pH. This review provides a detailed assessment of the MPs pollution in different water types, environmental implications, and corresponding treatment strategies. With the advancement in nanotechnology, mitigation strategies for aqueous pollution are seen, especially due to the fabrication of nanosheets/membranes mostly utilized as a filtration process. Two-dimensional (2D) materials are increasingly used for membranes due to their diverse structure, affinity, cost-effectiveness, and, most importantly, removal efficiency. The popular 2D materials used for membrane-based organic and inorganic pollutants from water mainly include graphene and MXenes however their effectiveness for MPs removal is still in its infancy. Albeit, the available literature asserts a 70- 99% success rate in micro/nano plastics removal achieved through membranes fabricated via graphene oxide (GO), reduced graphene oxide (rGO) and MXene membranes. This review examined existing membrane separation strategies for MPs removal, focusing on the structural properties of 2D materials, composite, and how they adsorb pollutants and underlying physicochemical mechanisms. Since MPs and other contaminants commonly coexist in the natural environment, a brief examination of the response of 2D membranes to MPs removal was also conducted. In addition, the influencing factors regulate MPs removal performance of membranes by impacting their two main operating routes (filtration and adsorption). Finally, significant limitations, research gaps, and future prospects of 2D material-based membranes for effectively removing MPs are also proposed. The conclusion is that the success of 2D material is strongly linked to the types, size of MPs, and characteristics of aqueous media. Future perspectives talk about the problems that need to be solved to get 2D material-based membranes out of the lab and onto the market.

Next-generation graphene oxide additives composite membranes for emerging organic micropollutants removal: Separation, adsorption and degradation

In the past two decades, membrane technology has attracted considerable interest as a viable and promising method for water purification. Emerging organic micropollutants (EOMPs) in wastewater have trace, persistent, highly variable quantities and types, develop hazardous intermediates and are diffusible. These primary issues affect EOMPs polluted wastewater on an industrial scale differently than in a lab, challenging membranes-based EOMP removal. Graphene oxide (GO) promises state-of-the-art membrane synthesis technologies and use in EOMPs removal systems due to its superior physicochemical, mechanical, and electrical qualities and high oxygen content. This critical review highlights the recent advancements in the synthesis of next-generation GO membranes with diverse membrane substrates such as ceramic, polyethersulfone (PES), and polyvinylidene fluoride (PVDF). The EOMPs removal efficiencies of GO membranes in filtration, adsorption (incorporated with metal, nanomaterial in biodegradable polymer and biomimetic membranes), and degradation (in catalytic, photo-Fenton, photocatalytic and electrocatalytic membranes) and corresponding removal mechanisms of different EOMPs are also depicted. GO-assisted water treatment strategies were further assessed by various influencing factors, including applied water flow mode and membrane properties (e.g., permeability, hydrophily, mechanical stability, and fouling). GO additive membranes showed better permeability, hydrophilicity, high water flux, and fouling resistance than pristine membranes. Likewise, degradation combined with filtration is two times more effective than alone, while crossflow mode improves the photocatalytic degradation performance of the system. GO integration in polymer membranes enhances their stability, facilitates photocatalytic processes, and gravity-driven GO membranes enable filtration of pollutants at low pressure, making membrane filtration more inexpensive. However, simultaneous removal of multiple contaminants with contrasting characteristics and variable efficiencies in different systems demands further optimization in GO-mediated membranes. This review concludes with identifying future critical research directions to promote research for determining the GO-assisted OMPs removal membrane technology nexus and maximizing this technique for industrial application.

Oxidation and coagulation/adsorption dual effects of ferrate (VI) pretreatment on organics removal and membrane fouling alleviation in UF process during secondary effluent treatment

Ultrafiltration (UF) has been widely used in water and advanced sewage treatment. Unfortunately, membrane fouling is still the main obstacle to further improvement in the system. Fe (III) salt, a type of traditional coagulant, is often applied to mitigate UF membrane fouling. However, low molecule organic weight cannot be effectively removed, thus the water quality after single coagulation treatment does not effectively meet the standard of subsequent water reuse during secondary effluent treatment. Recently, it has been found that potassium ferrate (Fe (VI)) has multiple functions of oxidation, sterilization and coagulation, with other studies proving its good performance in organics removal and membrane fouling mitigation. However, the respective contributions of oxidation and coagulation/adsorption have not yet been fully understood. The oxidation and coagulation/adsorption effects of Fe (VI) during membrane fouling mitigation were investigated here. The oxidation effect of Fe (VI) was the main reason for organics with the MW of 8-20 kDa removal, and its coagulation/adsorption mainly accounted for the smaller amounts of molecular organics removed. The oxidation of Fe (VI) was the main method for overcoming membrane fouling in the initial filtration; it largely alleviated the standard blockage. The formation of a cake layer transformed the main membrane fouling alleviation mechanism from oxidation to coagulation/adsorption and further removed smaller amounts of molecule organics with the increase of filtration cycles and Fe (VI) dosages. The main fouling mechanism altered from standard blocking and cake filtration to only cake filtration after Fe (VI) treatment. Overall, the mechanism of the oxidation and coagulation/adsorption of Fe (VI) were differentiated, and would provide a reference for future Fe (VI) pretreatment in UF membrane fouling control during water and wastewater treatments.