Elimination of oxacillin, its toxicity and antibacterial activity by using ionizing radiation

Phage-inspired targeting of antibiotic-loaded polymeric micelles for enhanced therapeutic efficacy against monomicrobial sepsis

The rapid increase in bacterial resistance to existing treatments underscores the critical need for novel therapeutic strategies. Here, an innovative approach using targeted nanocarrier systems that mimic phage-bacteria interactions through phage receptor binding protein (Gp45 from the ϕ11 lysogenic phage) or derived peptides (P1, P2, P3, P4, P5), are introduced. These nanodrugs, exhibited receptor-ligand specificity and strong binding affinity, for the first time, were employed for the precise delivery and targeting of antibiotics within living organisms. The actively targeted micelles via two methods were produced; conjugating GP45 to dual antibiotic-loaded PLGA-b-PEG micelles (MiGp45) and the synthesis of peptide-conjugated micelles with dual antibiotic-loaded PLGA-b-PEG-peptide triblock copolymers. The untargeted nano-drug reduced MIC values by 2-10 times for vancomycin and 9-75 times for oxacillin, resulting in a synergistic effect. MiGp45 and MiP1-targeted micelles further reduced MIC values at least twofold, up to ninefold in resistant strains, indicating significant antibacterial improvement. In a mouse model of sepsis by S. aureus, MiGp45 treatment resulted in complete recovery as opposed to death in the untreated group, significantly reduced bacterial load, pro-inflammatory cytokine expression, lung injury, and normalized oxidative stress. The phage-based nanodrugs show tremendous promise as a highly effective antimicrobial treatment targeting multidrug- resistant pathogens.

Investigation into the characteristics of electron beam-aged microplastics and adsorption behavior of dibutyl phthalate

Microplastics are increasingly prevalent in the environment, and their ability to adsorb various organic additives, posing harm to organisms, has attracted growing attention. Currently, there are no effective methods to age microplastics, and there is limited discussion on the subsequent treatment of aged microplastics. This study focuses on micro polyethylene (PE) and employs electron beam technology for aging treatment, investigating the adsorption and leaching behavior between PE and dibutyl phthalate (DBP) before and after aging. Experimental results indicate that with increasing doses of electron beam irradiation, the surface microstructure of PE worsens, inducing the generation of oxygen-containing functional groups on the surface of polyethylene. Comparative evaluations between electron beam aging and existing methods show that electron beam technology surpasses existing aging methods, achieving a level of aging exceeding 0.7 within an extremely short period of 1 min at doses exceeding 350 kGy. Adsorption experiments demonstrate that the adsorption between PE and DBP conforms to pseudo-second-order kinetics and the Freundlich model both before and after aging. The adsorption capacity of microplastics for DBP increases from 76.8 mg g-1 to 167.0 mg g-1 after treatment, exceeding that of conventional DBP adsorbents. Electron beam irradiation causes aging of microplastics mainly through the generation of ·OH, which lead to the formation of oxygen-containing functional groups on the microplastics' surface, thereby enhancing their adsorption capacity for DBP. This provides a new perspective for the degradation of aged microplastics and composite pollutants.

Radiolytic degradation of 4-hydroxybenzoate in aerated and deoxygenated aqueous solutions

The radiolytic degradation of 4-hydroxybenzoate (4-HBA-) in aerated, oxygen-free and N2O-saturated aqueous solutions at concentrations of 0.10 and 0.25 mmol/dm3 were gamma irradiated at different doses in a source of Co-60. The results show that ·OH adds predominantly to the 3 position of the aromatic ring, and elimination of the acid group leads to the degradation of 4-HBA-. With an N2O-saturated 0.10 mmol/dm3 4-HBA- solution, total degradation occurred at 1.6 kGy, and with a 0.25 mmol/dm3 solution, total degradation occurred at 3.5 kGy. In the aerated and oxygen-free 0.25 mmol/dm3 4-HBA- solutions, the behavior was similar, degradation occurring at a dose of 13.1 kGy. At the concentration of 0.10 mmol/dm3, total degradation occurred at 7.0 kGy, with small amounts of radiolytic products and byproducts. We propose a mechanism for the degradation of 4-HBA- caused by water radicals produced in the three environments, leading to formation of the identified stable products. Oxidation was followed by chemical oxygen demand (COD), which decreased as the 4-HBA- concentration increased. The kinetics showed a pseudo-first-order behavior. The rate constant of degradation was similar for the solutions with and without oxygen.

Preparation of visible-light active MOFs-Perovskites (ZIF-67/LaFeO3) nanocatalysts for exceptional CO2 conversion, organic pollutants and antibiotics degradation

Modern industries rapid expansion has heightened energy needs and accelerated fossil fuel depletion, contributing to global warming. Additionally, organic pollutants present substantial risks to aquatic ecosystems due to their stability, insolubility, and non-biodegradability. Scientists are currently researching high-performance materials to address these issues. LaFeO3 nanosheets (LFO-NS) were synthesized in this study using a solvothermal method with polyvinylpyrrolidone (PVP) as a soft template. The LFO-NS demonstrate superior performance, large surface area and charge separation than that of LaFeO3 nanoparticles (LFO-NP). The LFO-NS performance is further upgraded by incorporating ZIF-67. Our results confirmed the ZIF-67/LFO-NS nanocomposite have superior performances than pure LFO-NP and ZIF-67. The integration of ZIF-67 has enhanced the charge separation and promote the surface area of LFO-NSwhich was confirmed by various characterization techniques including TEM, HRTEM, DRS, EDX, XRD, FS, XPS, FT-IR, BET, PL, and RAMAN. The 5ZIF-67/LFO-NS sample showed significant activities for CO2 conversion, malachite green degradation, and antibiotics (cefazolin, oxacillin, and vancomycin) degradation. Furthermore, stability tests have confirmed that our optimal sample very active and stable. Furthermore, based on scavenger experiments and the photocatalytic degradation pathways, it has been established that H+ and •O2- are vital in the decomposition of MG and antibiotics. Our research work will open new gateways to prepare MOFs-Perovskites nanocatalysts for exceptional CO2 conversion, organic pollutants and antibiotics degradation.

Wastewater Characterization: Chemical Oxygen Demand or Total Organic Carbon Content Measurement?

The long time (2 h) required for measurement, expensive chemicals (Ag2SO4), and toxic reagents (K2Cr2O7, HgSO4) limit the application of the standard method for measuring the oxygen equivalent of organic content in wastewater (chemical oxygen demand, COD). In recent years, the COD has increasingly been replaced by the total organic carbon (TOC) parameter. Since the limit values of the pollution levels are usually given in terms of the COD, efforts are being made to find the correlation between these parameters. Several papers have published correlation analyses of COD and TOC for industrial and municipal wastewater, but the relationship has not been discussed for individual chemicals. Here, this relationship was investigated using 70 contaminants (laboratory chemicals, pharmaceuticals, and pesticides). The calculated COD values, in most cases, agreed, within ~10%, with the experimental ones; for tetracyclines and some chloroaromatic molecules, the measured values were 20-50% lower than the calculated values. The COD/TOC ratios were between 2 and 3: for macrolides, they were ~3; for fluoroquinolones and tetracyclines, they were ~2. The molecular structure dependence of the ratio necessitates the establishing of the correlation on an individual basis. In advanced oxidation processes (AOPs), the ratio changes during degradation, limiting the application of TOC instead of COD.

Changes in the behavior of Staphylococcus aureus strains in the presence of oxacillin under the effect of gamma radiation

Staphylococcus aureus (S. aureus) as a major pathogen is implicated in a wide range of foodborne and hospital-acquired infections, its methicillin resistant variants contribute to the spread of β-lactam antibiotic resistance. It is essentially important to destroy these pathogens, their resistance genes and the antibiotics in wastewaters. For this purpose reactions of reactive radicals (advanced oxidation processes), first of all hydroxyl radicals (•OH), are suggested. Here the radiolysis of water supplied these radicals. In the experiments B.01755 oxacillin sensitive and B.02174 resistant S. aureus strains were used to study their behaviorr in suspensions under the effect of irradiation in presence and absence of oxacillin. Oxacillin inactivation depended on concentration of the antibiotic used (0.042 and 1 g dm-3), higher concentration required a higher dose. When 106-109 CFU cm-3 S. aureus suspensions were irradiated with γ-radiation the bacteria were inactivated at low absorbed doses: 4 orders of magnitude decrease ocurred in the number of culturable cells at ∼0.6 kGy dose. Both cell membrane and DNA suffered considerable damages during irradiation. Due to the membrane damage the cells could not be stained, and the DNA content of cells in several days period was released into the solution. In DNA damage the oxacillin resistance mecA gene was also modified, it did not multiply in PCR test. These findings are important from the point of view of applying irradiation technology to stop the spread of antibiotic resistance.

Assessment of Molecularly Imprinted Polymers as Selective Solid-Phase Extraction Sorbents for the Detection of Cloxacillin in Drinking and River Water

This paper describes a new methodology for carrying out quantitative extraction of cloxacillin from drinking and river water samples using a molecularly imprinted polymer (MIP) as a selective sorbent for solid-phase extraction (MISPE). Several polymers were synthesized via thermal polymerization using cloxacillin as a template, methacrylic acid (MAA) as a functional monomer, ethyleneglycoldimethacrylate (EGDMA) as a cross-linker and different solvents as porogens. Binding characteristics of the adequate molecularly imprinted and non-imprinted (NIP) polymers were evaluated via batch adsorption assays following the Langmuir and Freundlich isotherms and Scatchard assays. The parameters related to the extraction approach were studied to select the most appropriate polymer for cloxacillin determination. Using the optimized MIP as the SPE sorbent, a simple sample treatment methodology was combined with high-performance liquid chromatography (HPLC) to analyze cloxacillin residues in drinking and river water. Under the optimum experimental conditions, the MISPE methodology was validated using spiked samples. The linearity for cloxacillin was assessed within the limits of 0.05-1.5 µg L-1 and the recovery percentage was higher than 98% (RSD < 4%). The limits of detection and limits of quantification were 0.29 and 0.37 µg L-1 and 0.8 and 0.98 µg L-1 for drinking and river water, respectively. The selectivity of MIP against other ß-lactam antibiotics with similar structures (oxacillin, cefazoline, amoxicillin and penicillin V) was studied, obtaining a good recovery higher than 85% for all except cefazoline. The proposed MISPE-HPLC methodology was successfully applied for the detection of cloxacillin in drinking water from Canal de Isabel II (Madrid) and river water from the Manzanares River (Madrid).

Degradation of hexavalent chromium and naphthalene by electron beam irradiation: Degradation efficiency, mechanisms, and degradation pathway

Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) in industrial wastewater have attracted much attention due to their damage to the environment and the human body. Studies have shown that there may be interactions between PAHs and HMs, leading to enhanced toxicity of both pollutants. It has been shown that traditional methods are difficult to treat a combination of PAHs and HMs simultaneously. This paper presented an innovative method for treating PAHs and HMs compound pollutants by electron beam irradiation and achieved the removal of the compound pollutants using a single means. Experiments showed that the absorbed dose at 15 kGy could achieve 100% degradation of NAP and 90% reduction of Cr (Ⅵ). This article investigated the effects of electron beam removal of PAHs and HMs complex contaminants in various water environmental matrices. The experimental results showed that the degradation of NAP followed the pseudo-first-order dynamics, and the degradation of NAP was more favorable under neutral conditions. Inorganic ions and water quality had little effect on NAP degradation. For electron beam reduction of Cr (Ⅵ), alkaline conditions were more conducive to reducing Cr (Ⅵ). Especially, adding K₂S₂O₈ or HCOOH achieved 99% reduction of Cr (Ⅵ). Experiments showed that •OH achieve the degradation of NAP, and e_aq^- achieve the reduction of Cr (Ⅵ). The results showed that the degradation of NAP was mainly achieved by benzene ring opening, carboxylation and aldehyde, which proved that the degradation of NAP was mainly caused by •OH attack. The toxicity analysis results showed that the electron beam could significantly reduce the toxicity of NAP, and the toxicity of the final product was much lower than NAP, realizing the harmless treatment of NAP. The experimental results showed that electron beam irradiation has faster degradation rates and higher degradation efficiency for NAP and Cr (Ⅵ) compared to other reported treatment methods.

Enhanced antibiotic degradation and hydrogen production of deacetoxycephalosporin C fermentation residue by gamma radiation coupled with nano zero-valent iron

Antibiotic fermentation residue (AFR) has been categorized as hazardous waste in China. Anaerobic biohydrogen fermentation may be a promising technology for handling AFR, which could achieve dual goals of waste treatment and clean energy production at the same time. However, the low hydrogen yield and low removal efficiency of residual antibiotics are two major factors limiting the AFR biohydrogen fermentation process. This work firstly applied gamma radiation (50 kGy) to remove the residual antibiotic in AFR and improve the bioavailability of organic matters, then adding nano zero-valent iron (nZVI) (100-1000 mg/L) to further enhance the AFR biohydrogen fermentation performance. Results showed that residual deacetoxycephalosporin C in AFR was removed with a high efficiency of 98.6%, and hydrogen yield achieved 20.45 mL/g-VS_added with the combined approach of gamma radiation pretreatment and 500 mg/L nZVI addition, which was 139.2% higher compared to the control experimental result. The combined approach also promoted the biohydrogen production rate, decreased the lag phase of hydrogen production, and increased the organics utilization. Microbiological analysis revealed that highly efficient hydrogen-producing genera Clostridium sensu stricto were enriched in much higher abundance with the combined approach, which might be the fundamental mechanism for the enhanced AFR fermentation performance.