Facile preparation of bismuth vanadate-sheet/carbon nitride rod-like interface photocatalyst for efficient degradation of model organic pollutant under direct sunlight irradiation

Triple-Phase Interfacial Freestanding Fluffy Pine Needle Structures for Efficient Self-Powered Photoelectrocatalysis

Approximately 2 billion people still lack access to clean drinking water. Extensive efforts are underway to develop semiconductor photocatalysts for water disinfection and environmental remediation, but conventional liquid-solid diphase interfacial photocatalysts face challenges like low diffusion coefficients and limited solubility of dissolved oxygen. This study introduces freestanding copper oxide fluffy pine needle structures (CO-FPNs) with tunable water pollutants-gas-solid (WGS) triple-phase interfaces that enhance oxygen enrichment and reactive oxygen species (ROS) production. Three differently structured CO-FPNs-microdendrites, hierarchical dendrites, and nanowires-are designed. The hierarchical CO-FPN/WGS, predominantly in the Cassie-Wenzel coexistence state, showed a 1.81- to 1.91-fold higher reaction rate than the micro- and nanostructured CO-FPNs due to increased interfacial O2 levels and high adsorption capability. Under illumination, the hierarchical CO-FPN/WGS achieved 99.999% sterilization by preventing pathogen adhesion and enhancing ROS generation. Additionally, a self-powered photoelectrocatalytic system is constructed using nickel-iron oxide-deposited bismuth vanadate (NiFeO/BiVO4) with hierarchical CO-FPN/WGS, achieving 1.45 times higher than the hierarchical CO-FPN/WGS alone, due to superior oxidation kinetics of NiFeO/BiVO4 and improved oxygen reduction via atmospheric oxygen from the hierarchical CO-FPN/WGS. This study demonstrates the first example of a triple-phase interfacial self-powered platform for efficient photoelectrocatalysis.

g-C3N4/Ag@AgCl with Z-scheme heterojunction and Ag electron bridge for enhanced photocatalytic degradation of tetracycline wastewater

Building Z-scheme heterojunctions with an electron bridge is a favored function for increasing photocatalytic activity. A facile approach for preparing g-C3N4/Ag@AgCl ternary heterojunctions by co-precipitation and photoreduction was established in this work. First, via co-precipitation, AgCl was modified on the surface of g-C3N4 to create a broad contact area between AgCl and g-C3N4. The AgCl is then reduced to Ag via an in-situ photoreduction technique, resulting in the formation of a ternary composite. The experimental results showed that when g-C3N4 modified 25% of the Ag@AgCl, that is, g-C3N4/Ag@AgCl-25 had the best photocatalytic performance, 94.9% of TC was degraded within 240 min, and the reaction rate to TC was 0.1214 min-1, which was 4.49 times and 8.12 times higher than that of g-C3N4 and Ag/AgCl, respectively. The excellent photocatalytic performance of g-C3N4/Ag@AgCl is attributed to the LSPR effect of Ag NPs and O-doping g-C3N4, which broadens the absorbance performance of g-C3N4, the establishment of Z-type heterojunctions between AgCl NPs and g-C3N4 NSs and Ag NPs as an electron transport bridge accelerate the photogenerated electrons transfer between AgCl and g-C3N4.

Accelerated radical generation from visible light driven peroxymonosulfate activation by Bi2MoO6/doped gCN S-scheme heterojunction towards Amoxicillin mineralization: Elucidation of the degradation mechanism

A novel S-scheme photocatalyst Bi₂MoO₆ @doped gCN (BMO@CN) was prepared through a facile microwave (MW) assisted hydrothermal process and further employed to degrade Amoxicillin (AMOX), by peroxymonosulfate (PMS) activation with visible light (Vis) irradiation. The reduction in electronic work functions of the primary components and strong PMS dissociation generate abundant electron/hole (e^-/h⁺) pairs and SO₄^*-,*OH,O₂^*-reactive species, inducing remarkable degeneration capacity. Optimized doping of Bi₂MoO₆ on doped gCN (upto 10 wt%) generates excellent heterojunction interface with facile charge delocalization and e^-/h⁺ separation, as a combined effect of induced polarization, layered hierarchical structure oriented visible light harvesting and formation of S-scheme configuration. The synergistic action of 0.25 g/L BMO(10)@CN and 1.75 g/L PMS dosage can degrade 99.9% of AMOX in less than 30 min of Vis irradiation, with a rate constant (k_obs) of 0.176 min^-1. The mechanism of charge transfer, heterojunction formation and the AMOX degradation pathway was thoroughly demonstrated. The catalyst/PMS pair showed a remarkable capacity to remediate AMOX-contaminated real-water matrix. The catalyst removed 90.1% of AMOX after five regeneration cycles. Overall, the focus of this study is on the synthesis, illustration and applicability of n-n type S-scheme heterojunction photocatalyst to the photodegradation and mineralization of typical emerging pollutants in the water matrix.

Recent advances in g-C3N4-based photo-enzyme catalysts for degrading organic pollutants

In recent years, photocatalytic reactions have shown great potential in degrading organic pollutants because of their simple operation and no secondary pollution. Graphitic carbon nitride (g-C₃N₄) is one of the most frequently used photocatalyst materials in the field of photocatalysis because it is a form of photocatalytic material with facile synthesis, no metal, visible light response, and strong stability. Enzyme-catalyzed degradation has received extensive attention due to its broad selectivity, high efficiency, and environmental friendliness. Horseradish peroxidase (HRP), one of several oxidoreductases utilized for pollutant degradation, has a wide range of applications due to its mild reaction conditions and high stability. Exploring efficient platforms for immobilizing g-C₃N₄ and HRP to develop photo-enzyme-coupled catalysis is an attractive practical topic. The coupling effect of g-C₃N₄ and HRP improves the carrier separation efficiency and generates more active species, which finally realize the solar-driven non-selective destruction of organic pollutants. We describe the alteration of g-C₃N₄ and the immobilization of HRP in detail in this study, and we outline recent developments in the photo-enzyme coupling of g-C₃N₄ and HRP.

Effect of water-oil ratio on the photocatalytic performance of visible light-active BiVO4 nanoparticles prepared by inverse microemulsion-calcination method

Nowadays, nano-photocatalysts (NPs) have become the research focus in the field of photocatalysis due to their excellent photocatalytic activity, and microemulsion is an effective method to prepare high-efficiency nano-photocatalysts. Here, BiVO₄ NPs with high efficiency under visible light were prepared by a combination of reverse microemulsion method and calcination method. XRD, SEM, TEM, XPS, DRS, PL, BET and other characterization tests were used to comprehensively explore the influence of water-oil ratio on the physicochemical properties of the catalysts. The results show that BiVO₄ NPs of monoclinic scheelite with high crystallization degree can be obtained by this method. The microscopic morphology, specific surface area and total pore volume of BiVO₄ NPs are significantly affected by the water-oil ratio. It is difficult to obtain BiVO₄ NPs with small particle size and uniform dispersion under the condition of too low or too high water-oil ratio. Meanwhile, the photogenerated carrier recombination efficiency of the catalyst is significantly improved, thus reducing the photocatalytic activity of the catalyst. Strikingly, the BiVO₄ NPs obtained under the condition of water-oil ratio is 20 exhibited well-dispersed nanospheres with diameters ranging from 80 to 100 nm. It has the highest photocatalytic activity due to its high crystallinity, large specific surface area and total pore volume and relatively low photogenerated carrier recombination efficiency. Under visible light irradiation, the degradation efficiency of RhB can reach 97.69% in 100 min, and the rate constant is 0.03253 min^-1.