Treatment of textile wastewater containing mixed toxic azo dye and chromium (VI) BY haloalkaliphilic bacterial consortium

Biodegradation of commercial textile reactive dye mixtures by industrial effluent adapted bacterial consortium VITPBC6: a potential technique for treating textile effluents

Textile industries release major fraction of dyestuffs in effluents leading to a major environmental concern. These effluents often contain more than one dyestuff, which complicates dye degradation. In this study ten reactive dyes (Reactive Yellow 145, Reactive Yellow 160, Reactive Orange 16, Reactive Orange 107, Reactive Red 195, Reactive Blue 21, Reactive Blue 198, Reactive Blue 221, Reactive Blue 250, and Reactive Black 5) that are used in textile industries were subjected to biodegradation by a bacterial consortium VITPBC6, formulated in our previous study. Consortium VITPBC6 caused single dye degradation of all the mentioned dyes except for Reactive Yellow 160. Further, VITPBC6 efficiently degraded a five-dye mixture (Reactive Red 195, Reactive Orange 16, Reactive Black 5, Reactive Blue 221, and Reactive Blue 250). Kinetic studies revealed that the five-dye mixture was decolorized by VITPBC6 following zero order reaction kinetic; Vmax and Km values of the enzyme catalyzed five-dye decolorization were 128.88 mg L-1 day-1 and 1003.226 mg L-1 respectively. VITPBC6 degraded the dye mixture into delta-3,4,5,6-Tetrachlorocyclohexene, sulfuric acid, 1,2-dichloroethane, and hydroxyphenoxyethylaminohydroxypropanol. Phytotoxicity, cytogenotoxicity, microtoxicity, and biotoxicity assays conducted with the biodegraded metabolites revealed that VITPBC6 lowered the toxicity of five-dye mixture significantly after biodegradation.

Always positive covalent organic nanosheet enabling pH-independent adsorption and removal of Cr(Ⅵ)

Rapid and highly effective removal of hexavalent chromium (Cr(Ⅵ)) is extremely vital to water resources restoration and environmental protection. To overcome the pH limitation faced by most ionic absorbents, an always positive covalent organic nanosheet (CON) material was prepared and its Cr(VI) adsorption and removal capability was investigated in detail. As-prepared EB-TFB CON (TFB = 1,3,5-benzaldehyde, EB = ethidium bromide) shows strong electropositivity in the tested pH range of 1 ∼ 10, display a pH-independent Cr(VI) removal ability, and work well for Cr(VI) pollution treatment with good anti-interference capability and reusability in a wide pH range covering almost all Cr(VI)-contaminated real water samples, thus eliminating the requirement for pH adjustment. Moreover, the nanosheet structure, which is obtained by a facile ultrasonic-assisted self-exfoliation, endows EB-TFB CON with fully exposed active sites and shortened mass transfer channels, and the Cr(VI) adsorption equilibrium can be reached within 15 min with a high adsorption capacity of 280.57 mg·g-1. The proposed Cr(VI) removal mechanism, which is attributed to the synergetic contributions of electrostatic adsorption, ion exchange and chemical reduction, is demonstrated by experiments and theoretical calculations. This work not only provides a general Cr(VI) absorbent without pH limitation, but also presents a paradigm to prepare ionic CONs with relatively constant surface charges.

Occurrence of trace elements in print paper products: Non-carcinogenic risk assessment through dermal exposure

Over time, the risk assessment of dermal exposure to pollutants in print paper products has received considerable attention. Most studies have focused on organic pollutants, especially bisphenol A (BPA). However, little is known about the levels of trace elements in print paper products, despite the knowledge that these elements are components of printing inks and toners. This study was aimed at determining the concentrations of trace elements in 5 types of paper products, namely bulletins, magazines, special events program booklets, handbills, and newspapers. The average daily intake (ADI) of each element was subsequently estimated through dermal exposure to the papers. The detection frequency of the elements of interest was high (nearly 100%) in most paper products, with the exception of chromium, whose detection was low. In contrast, Ag was not detected in any sample. The levels of the elements in the paper products were low and comparable to those found in other personal and consumer products with the potential for skin contact. The range values of estimated ADIs were 1.70-3.90E-08, 2.30-18.2E-10, 2.60-16.4E-09, 3.65-5.75E-08, 1.29-4.38E-08, 6.23-15.6E-10, 1.51-2.80E-10, 1.43-9.16E-09, 0.00-9.47E-09, and 4.68-220E-08 mg/kg bw/day for Mn, Co, Ni, Cu, Zn, As, Cd, Pb, Cr and Fe respectively. These values were well below the dermal standard reference doses (RfD) for each element. The present results indicate that dermal exposure to trace elements from print paper products was low and does not pose significant risks for toxic (non-carcinogenic) effects on humans.

Facile Synthesis of Hybrid Nanoflowers Using Glycine and Phenylalanine and Investigation of Their Catalytic Activity

In the context of the proposed work, two different amino acids (Glycine, Phenylalanine) have interacted with copper ions in a phosphate buffer (PBS) in place of enzymes. This interaction resulted in the nucleation of copper phosphate crystals and the formation of flower-shaped amino acid-copper hybrid nanostructures (AA-hNFs), which grew through self-assembly. While Cu (II) ions in the structure of AA-hNFs were used as Fenton's agent for the catalytic activity. SEM, energy dispersive X-ray spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy measurements were used to define the AA-hNFs' characterisation. The peroxidase-like activities of AA-hNFs were investigated by UV/VIS spectrophotometer. Metal nanoparticles have peroxidase-like activity. A class of enzymes known as peroxidases is able to catalyze the conversion of hydrogen peroxide into hydroxyl radicals. These radicals also take part in electron transfers with substrates, which results in color during oxidation. When cupric oxide nanoparticles are added to the peroxidase substrate while H2 O2 is present, a blue color product with a maximum absorbance at=652 nm can result, demonstrating the catalytic activity of a peroxidase. The morphology and composition of AA-hNFs were carefully characterized and the synthesized parameters were optimized systematically. Results showed that the nanoparticles were dispersed with an average diameter of 7-9 μm and indicated a uniform flower shape. The results of the investigation are anticipated to significantly advance a number of technical and scientific sectors.

Carbonized titanium dioxide with good adsorption properties for cationic dyes via simple heat treatment

With the development of modern industry, the discharge of dye wastewater is increasing year by year, and the damage caused by this wastewater to the ecosystem is often irreversible. Therefore, the research on the harmless treatment of dyes has attracted much attention in recent years. In this paper, commercial titanium dioxide (anatase nanometer titanium dioxide) was heat treated with anhydrous ethanol to synthesize titanium carbide (C/TiO2). Its maximum adsorption capacity for cationic dyes methylene blue (MB) and Rhodamine B is 27.3 and 124.6 mg g-1, respectively, which is much higher than that of pure TiO2. The adsorption kinetics and isotherm model of C/TiO2 were studied and characterized by Brunauer-Emmett-Teller, x-ray photoelectron spectroscopy, x-ray diffraction, Fourier transform infrared spectroscopy, and other methods. The results show that the carbon layer on the surface of C/TiO2 promotes the increase in surface hydroxyl groups, which is the main reason for the increase in MB adsorption. Compared with other adsorbents, C/TiO2 showed excellent reusability. The experimental results of adsorbent regeneration showed that the adsorption rate R% of MB was almost unchanged after three cycles. During the recovery of C/TiO2, the dyes adsorbed on its surface are removed, which solves the problem that the adsorbent cannot degrade dyes simply by adsorption. Additionally, C/TiO2 has a stable adsorption effect, is insensitive to the pH value, has a simple preparation process, and has relatively low raw material prices, making it suitable for large-scale operation. Therefore, it has good commercial prospects in the organic dye industry wastewater treatment.

Immobilization of ZnIn2S4 on sodium alginate foam for efficient hexavalent chromium removal

Photocatalytic technology has been extensively studied in the removal of toxic Cr(VI) from wastewater. However, common powdery photocatalysts suffer from poor recyclability and secondly pollution. Herein, the zinc indium sulfide (ZnIn₂S₄) particles were integrated onto the sodium alginate foam(SA) matrix through a facile way to obtain foam-shape catalyst. Diverse characterization techniques including X-ray diffraction(XRD), Fourier transform infrared(FT-IR), scanning electron microscope(SEM) and X-ray photoelectron spectroscopy(XPS) were employed to reveal the composite compositions, organic-inorganic interface interactions, mechanical property, and pore morphology of the foams. Results demonstrated that the ZnIn₂S₄ crystals wrapped on SA skeleton tightly and constructed a flower-like structure. As-prepared hybrid foam with lamellar structure showed great potential in Cr(VI) treatment due to the presence of macropores and highly available active sites. A maximum Cr(VI) photoreduction efficiency of 93 % were observed over the optimal sample of ZS-1 (with a ZnIn₂S₄:SA mass ratio of 1:1) under visible irradiation. When tested with mixed pollutants (Cr(VI)/dyes), the ZS-1 sample displayed an enhanced removal efficiency of 98 % for Cr(VI) and 100 % for Rhodamine B(RhB). Moreover, the composite maintained prominent photocatalytic performance and a relatively integral 3D structure scaffold after continuous six runs, revealing its superior reusability and durability.

Application of Salvinia sps. in remediation of reactive mixed azo dyes and Cr (VI) - Its pathway elucidation

The emerging industrialization has resulted in the rapid growth of textile industries across the globe. The presence of xenobiotic pollutants in textile wastewater threatens the ecosystem. Applying different microbes (bacteria, fungi & algae) has paved the way for phytoremediation - the eco-friendly, cost-effective method. The present study focuses on the phytoremediation of reactive dyes - Reactive red, Reactive Brown & Reactive Black and Cr (VI) in synthetic textile wastewater using Salvinia sps. The mixed azo dyes of each 100 mg/L showed decolourization of 75 ± 0.5% and 82 ± 0.5% of removal of 20 mg/L of Cr (VI) after eight days of incubation in a phytoreactor setup. Chlorophyll analysis revealed the gradual decrease in the photosynthetic pigments during the remediation. The degraded metabolites were analyzed using FT-IR and showed the presence of aromatic amines on day zero, which were converted to aliphatic amines on day four. The GC-MS analysis revealed the disruption of -NN- bond, rupture of -CN- bond, scission of -N-N-bond, and loss of -SO₃H from the Reactive Black dye leading to the formation of an intermediate p-Hydroxy phenylhydrazinyl. The rupture of Reactive red dye resulted in the formation of p-Hydrazinyl toluene sulphonic acid, Naphthyl amine -3,6-disulphonic acid and 8-Hydroxy Naphthyl amine -3,6-disulphonic acid. Decarboxylation, desulphonation, deoxygenation and deamination of Reactive Brown dye showed the presence of different metabolites and metabolic pathways were proposed for the reactive azo dyes which were phytoremediated.

Mixed polyaromatic hydrocarbon degradation by halotolerant bacterial strains from marine environment and its metabolic pathway

Accidents involving diesel oil spills are prevalent in sea- and coastal regions. Polycyclic aromatic hydrocarbons (PAHs) can be adsorbed in soil and constitute a persistent contaminant due to their poor water solubility and complex breakdown. PAHs pollution is a pervasive environmental concern that poses serious risks to human life and ecosystems. Thus, it is the need of the hour to degrade and decontaminate the toxic pollutant to save the environment. Among all the available techniques, microbial degradation of the PAHs is proving to be greatly beneficial and effective. Bioremediation overcomes the drawbacks of most physicochemical procedures by eliminating numerous organic pollutants at a lower cost in ambient circumstances and has therefore become a prominent remedial option for pollutant removal, including PAHs. In the present study, we have studied the degradation of Low molecular Weight and High Molecular Weight PAH in combination by bacterial strains isolated from a marine environment. Optimum pH, temperature, carbon, and nitrogen sources, NaCl concentrations were found for efficient degradation using the isolated bacterial strains. At 250 mg/L concentration of the PAH mixture an 89.5% degradation was observed. Vibrio algiolytcus strains were found to be potent halotolerant bacteria to degrade complex PAH into less toxic simple molecules. GC-MS and FTIR data were used to probe the pathway of degradation of PAH.

Enhancement of photocatalytic efficacy by exploiting copper doping in nano-hydroxyapatite for degradation of Congo red dye

This research deals with the photocatalytic activity of hydroxyapatite and the improvement of efficiency by doping various percentages of copper; the catalysts were synthesized by the wet-chemical method. Pure and copper-doped photocatalysts were characterized by several techniques including X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) spectroscopy, Raman spectroscopy, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), dynamic scanning calorimetry (DSC), and UV-Vis spectroscopy. The competency of pure and copper-doped hydroxyapatite as photocatalysts was assessed by their interaction with Congo red dye. The crystallographic parameters of the catalysts were also estimated by employing the XRD technique, and a relationship was established between the calculated parameters and photocatalytic performance. Crystallite size was calculated from various model equations, which revealed an acceptable crystallite size of 42-68 nm. Copper doping in hydroxyapatite impressively augmented the photocatalytic efficacy, for example 99% dye was degraded upon 0.63% Cu-doping compared to 75% for the pure HAp, which was exemplified not only by the reaction rate but also by the quantum yield. The degradation percentages changed with time but became fixed at 200 min. The molar extinction coefficient was estimated by employing the Beer-Lambert law and further utilized to compute the photonic efficiency of the catalysts. In the study of the photochemical reaction, a simplified reaction process was proposed, and the potentials of the conduction band and valence band were assessed, which influenced the activity. The doping of Cu in crystalline hydroxyapatite will enhance the photocatalytic activity towards Congo red dye under all experimental conditions.

Microbial Degradation of Azo Dyes: Approaches and Prospects for a Hazard-Free Conversion by Microorganisms

Azo dyes have become a staple in various industries, as colors play an important role in consumer choices. However, these dyes pose various health and environmental risks. Although different wastewater treatments are available, the search for more eco-friendly options persists. Bioremediation utilizing microorganisms has been of great interest to researchers and industries, as the transition toward greener solutions has become more in demand through the years. This review tackles the health and environmental repercussions of azo dyes and its metabolites, available biological approaches to eliminate such dyes from the environment with a focus on the use of different microorganisms, enzymes that are involved in the degradation of azo dyes, and recent trends that could be applied for the treatment of azo dyes.