High positively charged Fe3O4 nanocomposites for efficient and recyclable demulsification of hexadecane-water micro-emulsion

Preparation and Application of Magnetic Composites Using Controllable Assembly for Use in Water Treatment: A Review

The use of magnetic composites in wastewater treatment has become widespread due to their high flocculating characteristics and ferromagnetism. This review provides an analysis and summary of the preparation and application of magnetic composites through controllable assembly for use in wastewater treatment. The applications of magnetic composites include the treatment of dye wastewater, heavy metal wastewater, microalgae suspensions, and oily wastewater. Additionally, the recycling and regeneration of magnetic composites have been investigated. In the future, further research could be focused on improving the assembly and regeneration stability of magnetic composites, such as utilizing polymers with a multibranched structure. Additionally, it would be beneficial to explore the recycling and regeneration properties of these composites.

Magnetic Dendritic Polymer Nanospheres for High-Performance Separation of Histidine-Rich Proteins

Magnetic nanospheres are becoming a promising platform for a wide range of applications in pharmacy, life science, and immunodiagnostics due to their high surface area, ease of synthesis and manipulation, fast separation, good biocompatibility, and recyclable performance. In this work, an innovative and efficient method is developed by in situ reducing and growing Ni(OH)₂ for the preparation of dendritic mesoporous nanocomposites of silica@Fe₃O₄/tannic acid@nickel hydroxide (dSiO₂@Fe₃O₄/TA@Ni(OH)₂). The flower-like nanospheres have good magnetic response, large surface area, and high histidine-rich protein (His-protein) purification performance. The dSiO₂@Fe₃O₄/TA@Ni(OH)₂ nanospheres were synthesized on the basis of a φ(NaSal/CTAB) of 1/1 and a mass of ferrous chloride tetrahydrate of 0.3 g, resulting in a saturation magnetization value of 48.21 emu/g, which means it can be collected within ∼1 min using a magnetic stand. Also, the BET test showed that the surface area is 92.47 m²/g and the pore size is ∼3.9 nm for dSiO₂@Fe₃O₄/TA@Ni(OH)₂ nanocomposites. Notably, the nickel hydroxide with unique flower-like structural features enables the combination of a large number of Ni²⁺ ions and His-proteins for high performance. The isolation and purification experiments of the synthesized dSiO₂@Fe₃O₄/TA@Ni(OH)₂ were performed by separating His-proteins from a matrix composed of bovine hemoglobin (BHb), bovine serum albumin (BSA), and lysozyme (LYZ). The result showed that the nanospheres have a high combination capacity of ∼1880 mg/g in a rapid equilibrium time of 20 min, which was selective for the adsorption of BHb. In addition, the stability and recyclability of BHb are 80% after seven cycles. Furthermore, the nanospheres were also used to isolate His-proteins from fetal bovine serum, proving its utility. Therefore, the strategy of separating and purifying His-proteins using dSiO₂@Fe₃O₄/TA@Ni(OH)₂ nanospheres is promising for practical applications.

Synthesis and Demulsification Properties of Poly (DMDAAC-co-DAMBAC) (9:1) Copolymer

Utilizing the copolymerization modification of dimethyl diallyl ammonium chloride (DMDAAC), the high positive charge density of the copolymer could be maintained, thereby facilitating the deficiency of its monomer in the application. In this paper, poly (DMDAAC-co-DAMBAC) (9:1) was synthesized with an aqueous polymerization method using DMDAAC and methyl benzyl diallyl ammonium chloride (DAMBAC) as monomers and 2,2'-azobis [2-methylpropionamidine] dihydrochloride (V50) as an initiator. Targeted to the product's weight-average relative molecular mass (M_w), the response surface methodology (RSM) was used to optimize the preparation process. The optimal process conditions were obtained as follows: w (M) = 80.0%, m (V50):m (M) = 0.00700%, m (Na₄EDTA):m (M) = 0.00350%, T₁ = 50.0 °C, T₂ = 60.0 °C, and T₃ = 72.5 °C. The intrinsic viscosity ([η]) of the product was 1.780 dL/g, and the corresponding double bond conversion (Conv.) was 90.25 %. Poly (DMDAAC-co-DAMBAC) (9:1) revealed a highest M_w of 5.637 × 10⁵, together with the polydispersity index d (M_w/M_n) as 1.464. For the demulsification performance of simulated crude oil O/W emulsions, the demulsification rate of poly (DMDAAC-co-DAMBAC) (9:1) could reach 97.73%. Our study has illustrated that the copolymerization of DMDAAC and a small amount of DAMBAC with poor reactivity could significantly improve the relative molecular weight of the polymer, enhance its lipophilicity, and thus the application scope of the polymer.

Demulsification Performance and Mechanism of Tertiary Amine Polymer-Grafted Magnetic Nanoparticles in Surfactant-Free Oil-in-Water Emulsion

Numerous cationic magnetic nanoparticles (MNPs) have previously been developed for demulsifying oil-in-water (O/W) emulsion, and results showed that the cationic MNPs could effectively flocculate and remove the negatively charged oil droplets via charge attraction; however, to the best of our knowledge, there are no research reports regarding the synergetic influence of both the positive charge density and interfacial activity of MNPs on the demulsification performance. In this study, three tertiary amine polymer-grafted MNPs, namely, poly(2-dimethylaminoethyl acrylate)-grafted MNPs (M-PDMAEA), poly(2-dimethylamino)ethyl methacrylate)-grafted MNPs (M-PDMAEMA), and poly(2-diethylaminoethyl methacrylate)-grafted MNPs (M-PDEAEMA), were synthesized and evaluated for their demulsification performance. Results demonstrated that a high positive charge density and superior interfacial activity of MNPs could cause partial oil droplet re-dispersion when excessive MNPs were introduced, leading to a lower magnetic separation efficiency and narrower demulsification window. Herein, a demulsification window is defined as a range of nanoparticle dosages in which the MNPs can effectively demulsify the O/W emulsion under certain conditions. For highly positively charged MNPs, their good interfacial activity could aggravate the formation of a narrower demulsification window. When tertiary amine polymer-grafted MNPs carried a lower positive charge density or weak interfacial activity, that is, M-PDMAEA at pH 4.0, M-PDMAEMA at pH 5.0-9.0, and M-PDEAEMA at pH 9.0-10.0, wide demulsification windows were observed. Additionally, a recycling experiment suggested that MNPs could maintain high demulsification efficiency up to at least five cycles, indicating their satisfactory recyclability. The three tertiary amine polymer-grafted MNPs can be potentially used for efficient demulsification from surfactant-free O/W emulsion in various pH ranges.

Laser-scribed Graphene Electrodes Functionalized with Nafion/Fe3O4 Nanohybrids for the Ultrasensitive Detection of Neurotoxin Drug Clioquinol

The analysis of pharmaceutical active ingredients plays an important role in quality control and clinical trials because they have a significant physiological effect on the human body even at low concentrations. Herein, a flexible three-electrode system using laser-scribed graphene (LSG) technology, which consists of Nafion/Fe₃O₄ nanohybrids immobilized on LSG as the working electrode and LSG counter and reference electrodes on a single polyimide film, is presented. A Nafion/Fe₃O₄/LSG electrode is constructed by drop coating a solution of Nafion/Fe₃O₄, which is electrostatically self-assembled between positively charged Fe₃O₄ and negatively charged Nafion on the LSG electrode and is used for the first time to determine a neurotoxicity drug (clioquinol; CQL) in biological samples. Owing to their porous 3D structure, an enriched surface area at the active edges and polar groups (OH, COOH, and -SO₃H) in Nafion/Fe₃O₄/LSG electrodes resulted in excellent wettability to facilitate electrolyte diffusion, which gave ∼twofold enhancement in electrocatalytic activity over LSG electrodes. The experimental parameters affecting the analytical performance were investigated. The quantification of clioquinol on the Nafion/Fe₃O₄/LSG electrode surface was examined using differential pulse voltammetry and chronoamperometry techniques. The fabricated sensor displays preferable sensitivity (17.4 μA μM^-1 cm^-2), a wide linear range (1 nM to 100 μM), a very low detection limit (0.73 nM), and acceptable selectivity toward quantitative analysis of CQL. Furthermore, the reliability of the sensor was checked by CQL detection in spiked human blood serum and urine samples, and satisfactory recoveries were obtained.