Optimization, equilibrium, adsorption behaviour of Cu/Zn/Fe LDH and LDHBC composites towards atrazine reclamation in an aqueous environment

Comparative investigation on the adsorption behavior of bromate in aqueous solutions using Zn/Ni/Al-LDH and Ni/Al-LDH: optimization, equilibrium analysis, and mechanistic insights

The presence of bromate in water poses a significant health risk. In order to effectively eliminate bromate from water, this study synthesized a series of ternary Zn-Ni-Al layered double hydroxides with varying Zn/Ni/Al atomic ratios using a co-precipitation method. The adsorbents were characterized using various techniques including XRD, Fourier transform infrared spectroscopy, and N2 adsorption-desorption isotherms. Among them, ZnNiAl-2 exhibited the highest crystallinity and largest specific surface area (316.1 m2 g-1), which was compared to the binary hydrotalcite NiAl-LDH for its ability to adsorb bromate from water. Results demonstrated that the adsorption isotherm of bromate on ZnNiAl-2 followed the Langmuir model, with a maximum adsorption capacity of 120.5 mg g-1, significantly higher than that of NiAl at 75.5 mg g-1, indicating strong adsorption capability and reusability performance. The adsorption kinetics were also found to be in accordance with the pseudo-second-order kinetic model. The mechanism involved both surface adsorption and anion exchange.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40201-025-00932-6.

Fabrication of engineered biochar for remediation of toxic contaminants in soil matrices and soil valorization

Biochar has emerged as an efficacious green material for remediation of a wide spectrum of environmental pollutants. Biochar has excellent characteristics and can be used to reduce the bioavailability and leachability of emerging pollutants in soil through adsorption and other physico-chemical reactions. This paper systematically reviewed previous researches on application of biochar/engineered biochar for removal of soil contaminants, and underlying adsorption mechanism. Engineered biochar are derivatives of pristine biochar that are modified by various physico-chemical and biological procedures to improve their adsorption capacities for contaminants. This review will promote the possibility to expand the application of biochar for restoration of degraded lands in the industrial area or saline soil, and further increase the useable area. This review shows that application of biochar is a win-win strategy for recycling and utilization of waste biomass and environmental remediation. Application of biochar for remediation of contaminated soils may provide a new solution to the problem of soil pollution. However, these studies were performed mainly in a laboratory or a small scale, hence, further investigations are required to fill the research gaps and to check real-time applicability of engineered biochar on the industrial contaminated sites for its large-scale application.

Rapid and efficient removal of methylene blue dye from aqueous solutions using extract-modified Zn-Al LDH

Environmental pollution, particularly water pollution caused by organic substances like synthetic dyes, is a pressing global concern. This study focuses on enhancing the adsorption capacity of layered double hydroxides (LDHs) to remove methylene blue (MB) dye from water. The synthesized materials are characterized using techniques like FT-IR, XRD, SEM, TEM, TGA, EDS, BET, BJH, AFM, and UV-Vis DRS. Adsorption experiments show that Zn-Al LDH@ext exhibits a significant adsorption capacity for MB dye compared to pristine LDH. In addition, Zn-Al LDH@ext shows a significant increase in stability, which is attributed to the presence of phenolic compounds in the extract and the interactions between the functional groups of the extract and LDH. The pH and adsorbent dosage optimizations show that pH 7 and 0.7 g of Zn-Al LDH@ext are optimal conditions for efficient MB removal. The study assessed adsorption kinetics through the examination of Langmuir, Freundlich, and Temkin isotherms. Additionally, four kinetic models, namely pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich, were analyzed. The results indicated that the Temkin isotherm (R2 = 0.9927), and pseudo-second-order (R2 = 0.9999) kinetic provided the best fit to the experimental data. This study introduces a novel approach to enhance adsorption efficiency using modified LDHs, contributing to environmentally friendly and cost-effective water treatment methods.

Unveiling glutamic acid-functionalized LDHs: understanding the Cr(VI) removal mechanism from microscopic and macroscopic view points

Interlayer functionalization modulation is essential for modifying LDHs and improving their selectivity and adsorption capacity for target pollutants. In this work, Glu@NiFe-LDH was synthesized using a simple one-step hydrothermal method and tested for its ability to remove CrO42- from wastewater. The modification significantly increased the composite material's removal ability by 2-3 times, up to 98.36 mg g-1. The behavior of CrO42- adsorption on Glu@NiFe-LDH was further studied by adjusting the affecting factors (i.e., temperature, pH, contact time, initial concentration, and interfering substance), and the adsorption behavior was confirmed as a spontaneous and chemisorption process. And the result was that Glu@NiFe-LDH demonstrated high capacity, efficiency, stability, and selectivity for the adsorption of CrO42- in a single electrolyte and natural water containing competing anions. Furthermore, molecular dynamics simulations (NVT ensemble) were employed to further reveal the mechanism of glutamic acid modification on LDH at the microscopic scale. Additionally, the IRI analysis method revealed the mechanism of weak interaction between glutamic acid molecules and CrO42-. This study provides a detailed understanding of the intercalation mechanism involved in the amino acid modification of LDHs. It explains the adsorption mechanism of metal oxo-acid radicals by amino acid-modified LDHs from a theoretical perspective. The findings offer experiments and a theoretical basis for designing targeted adsorbents in the future.

Recent Progress of Layered Double Hydroxide-Based Materials in Wastewater Treatment

Layered double hydroxides (LDHs) can be used as catalysts and adsorbents due to their high stability, safety, and reusability. The preparation of modified LDHs mainly includes coprecipitation, hydrothermal, ion exchange, calcination recovery, and sol-gel methods. LDH-based materials have high anion exchange capacity, good thermal stability, and a large specific surface area, which can effectively adsorb and remove heavy metal ions, inorganic anions, organic pollutants, and oil pollutants from wastewater. Additionally, they are heterogeneous catalysts and have excellent catalytic effect in the Fenton system, persulfate-based advanced oxidation processes, and electrocatalytic system. This review ends with a discussion of the challenges and future trends of the application of LDHs in wastewater treatment.

Facile synthesis of triazine-based microporous organic network for high-efficient adsorption of flumequine and nadifloxacin: A comprehensive study on adsorption mechanisms and practical application potentials

Flumequine (FLU) and nadifloxacin (NAD), as emerging contaminants, have received extensive attention recently. In this study, a triazine-based microporous organic network (TMON) was synthetized and developed as an excellent adsorbent for FLU and NAD. The adsorption behavior and influence factors were investigated in both single and binary systems. Insight into the adsorption mechanisms were conducted through experiments, models, and computational studies, from macro and micro perspectives including functional groups, adsorption sites, adsorption energy and frontier molecular orbital. The results showed that the maximum adsorption capacities of TMON for FLU and NAD are 325.27 and 302.28 mg/g under 30 °C higher than records reported before. TMON exhibits the better adaptability and anti-interference ability for influence factors, leading to the preferable application effect in kinds of real water samples. TMON also shows the application potentials for the adsorption of other quinolone antibiotics and CO₂ capture. Hydrogen-bonding interaction played the most critical role compared to π-π stacking effect, π-π electron-donor-acceptor interaction, CH-π interaction, and hydrophobic interaction during the adsorption. TMON could be regarded as a promising environmental adsorbent for its large surface area, stable physical and chemical properties, excellent recyclability, and wide range of applications.

Insight into atrazine removal by fallen leaf biochar prepared at different pyrolysis temperatures: Batch experiments, column adsorption and DFT calculations

The environmental pollution caused by atrazine in the agricultural production cannot be ignored. In this study, the fallen leaf biochar (LBC) was prepared at three different temperatures (500 °C, 600 °C, and 700 °C) using a simple pyrolysis method (500 LBC, 600 LBC, and 700 LBC) for atrazine adsorption. Batch experiments showed that the performance of LBC in atrazine adsorption improved with rising pyrolysis temperature, and the highest adsorption amount of 700 LBC reached 84.32 mg g^-1. Kinetic and isotherm models showed that the adsorption behaviors were both monolayer and multilayer chemisorption. The findings of the characterizations (Elemental analysis, BET, XRD, Raman, FT-IR, and XPS) confirmed that the degree of aromatization determined the adsorption capacity of LBC to atrazine, and π-π electron donor-acceptor interaction was the main adsorption mechanism. Density functional theory (DFT) calculations showed that the highly aromatized biochar was more effective for atrazine adsorption, manifested as smaller molecular distances, higher adsorption energies, more stable complex structures, and stronger π-electron conjugation. In the column adsorption experiments, reducing the inlet flow rate or increasing the bed height extended the breakthrough time and exhaustion time of the breakthrough curves, and 700 LBC still showed good adsorption performance after five cycles. Overall, fallen leaf biochar as a reuse product of resource showed good potential for application in atrazine adsorption, which can be used for atrazine-contaminated water remediation.