Recent advances in the electrochemical applications of Ni-based metal organic frameworks (Ni-MOFs) and their derivatives

Layer-by-Layer Immobilization of DNA Aptamers on Ag-Incorporated Co-Succinate Metal-Organic Framework for Hg(II) Detection

Layer-by-layer (LbL) immobilization of DNA aptamers in the realm of electrochemical detection of heavy metal ions (HMIs) offers an enhancement in specificity, sensitivity, and low detection limits by leveraging the cross-reactivity obtained from multiple interactions between immobilized aptamers and developed material surfaces. In this research, we present a LbL approach for the immobilization of thiol- and amino-modified DNA aptamers on a Ag-incorporated cobalt-succinate metal-organic framework (MOF) (Ag@Co-Succinate) to achieve a cross-reactive effect on the electrochemical behavior of the sensor. The solvothermal method was utilized to synthesize Ag@Co-Succinate, which was also characterized through various techniques to elucidate its structure, morphology, and presence of functional groups, confirming its suitability as a host matrix for immobilizing both aptamers. The Ag@Co-Succinate aptasensor exhibited extraordinary sensitivity and selectivity towards Hg(II) ions in electrochemical detection, attributed to the unique binding properties of the immobilized aptamers. The exceptional limit of detection of 0.3 nM ensures the sensor's suitability for trace-level Hg(II) detection in various environmental and analytical applications. Furthermore, the developed sensor demonstrated outstanding repeatability, highlighting its potential for long-term and reliable monitoring of Hg(II).

EL-Sanafery S. Graphitic Carbon Nitride/MOFs Hybrid Composite as Highly Selective and Sensitive Electrodes for Calcium Ion Detection

The metal-organic framework (MOF) is a class of materials that exhibits a notable capacity for electron transfer. This unique framework design offers potential applications in various fields, including catalysis, gas storage, and sensing. Herein, we focused on a specific type of MOF called Ti-MOF. To enhance its properties and functionality, the composite material was prepared by incorporating graphitic carbon nitride (g-C3N4) into the Ti-MOF structure. This composite, known as g-C3N4@Ti-MOF, was selected as the active material for ion detection, specifically targeting calcium ions (Ca2+). To gain a comprehensive understanding of the structural and chemical properties of the g-C3N4@Ti-MOF composite, several analytical techniques were employed to characterize the prepared g-C3N4@Ti-MOF composite, including X-ray diffraction (XRD), SEM-EDX, and FT-IR. For comparison, different pastes were prepared by mixing Ti-MOF or g-C3N4@Ti-MOF, graphite, and o-NPOE as a plasticizer. The divalent Nernstian responses of the two best electrodes, I and II, were 28.15 ± 0.47 and 29.80 ± 0.66 mV decade-1, respectively, with concentration ranges of 1 µM-1 mM and 0.1 µM-1 mM with a content 1.0 mg Ti-MOF: 250 mg graphite: 0.1 mL o-NPOE and 0.5 mg g-C3N4@Ti-MOF: 250 mg graphite: 0.1 mL o-NPOE, respectively. The electrodes showed high sensitivity and selectivity for Ca2+ ions over different species. The suggested electrodes have been successfully employed for Ca2+ ion measurement in various real samples with excellent precision (RSD = 0.74-1.30%) and accuracy (recovery = 98.5-100.2%), and they exhibited good agreement with the HPLC.

Simultaneous Catechol and Hydroquinone Detection with Laser Fabricated MOF-Derived Cu-CuO@C Composite Electrochemical Sensor

The conversion of metal-organic frameworks (MOFs) into advanced functional materials offers a promising route for producing unique nanomaterials. MOF-derived systems have the potential to overcome the drawbacks of MOFs, such as low electrical conductivity and poor structural stability, which have hindered their real-world applications in certain cases. In this study, laser scribing was used for pyrolysis of a Cu-based MOF ([Cu4{1,4-C6H4(COO)2}3(4,4'-bipy)2]n) to synthesize a Cu-CuO@C composite on the surface of a screen-printed electrode (SPE). Scanning electron microscopy, X-ray diffractometry, and Energy-dispersive X-ray spectroscopy were used for the investigation of the morphology and composition of the fabricated electrodes. The electrochemical properties of Cu-CuO@C/SPE were studied by cyclic voltammetry and differential pulse voltammetry. The proposed flexible electrochemical Cu-CuO@C/SPE sensor for the simultaneous detection of hydroquinone and catechol exhibited good sensitivity, broad linear range (1-500 μM), and low limits of detection (0.39 μM for HQ and 0.056 μM for CT).

Highly Efficient Cauliflower-like Palladium-Loaded Porous MOF as a Robust Material for the Degradation of Organic Dyes

A series of porous MOF materials, viz., Pdx@IRMOF-9 (x = 2, 5, and 10%) were synthesized by loading varying concentrations of Pd(II) on IRMOF-9. The synthesized MOF materials were characterized by ltravioletisible (UV-Vis) spectroscopy, Fourier transform Infrared (FT-IR) spectroscopy, powder X-ray diffraction (PXRD), Brunauer-Emmett-Teller (BET), and scanning electron microscopy (SEM) analyses. UV, FT-IR, and PXRD data of Pd(II)@IRMOF-9 were found to be in line with those of IRMOF-9, which suggests that the structure of the IRMOF-9 remained intact upon Pd(II) loading. Surface morphology of IRMOF-9 showed sheet-like structures, and upon incorporation of Pd(II) to IRMOF-9, porous cauliflower-shaped MOFs were obtained. The SEM area mapping of Pd10%@IRMOF-9 confirmed the homogeneous dispersion of Pd(II) on IRMOF-9. BET measurements suggested an increase in the surface area as well as pore size upon incorporation of Pd(II) on IRMOF-9. Due to high porosity and high petal density, Pd10%@IRMOF-9 demonstrated degradation of seven organic dyes, namely, orange G, methylene blue, methyl orange, congo red , methyl red, rhodamine 6G, and neutral red. It showed excellent results with >90% dye degradation efficiency in case of cationic, anionic as well as neutral dyes. Degradation of organic dyes followed the pseudo-first-order kinetics. Kinetic parameters, KM and Vmax, were calculated using the double reciprocal Lineweaver-Burk plot and were found to be 13.2 μM and 26.68 × 10-8 M min-1, respectively. Recyclability studies of heterogeneous Pd10%@IRMOF-9 demonstrated the degradation of CR dye for five consecutive cycles without significant loss of its catalytic activity. Herein, a robust and efficient material for the degradation of organic dyes has been developed and demonstrated.

An Overview to Molecularly Imprinted Electrochemical Sensors for the Detection of Bisphenol A

Bisphenol A (BPA) is an industrial chemical used extensively in plastics and resins. However, its endocrine-disrupting properties pose risks to human health and the environment. Thus, accurate and rapid detection of BPA is crucial for exposure monitoring and risk mitigation. Molecularly imprinted electrochemical sensors (MIES) have emerged as a promising tool for BPA detection due to their high selectivity, sensitivity, affordability, and portability. This review provides a comprehensive overview of recent advances in MIES for BPA detection. We discuss the operating principles, fabrication strategies, materials, and methods used in MIES. Key findings show that MIES demonstrate detection limits comparable or superior to conventional methods like HPLC and GC-MS. Selectivity studies reveal excellent discrimination between BPA and structural analogs. Recent innovations in nanomaterials, novel monomers, and fabrication techniques have enhanced sensitivity, selectivity, and stability. However, limitations exist in reproducibility, selectivity, and stability. While challenges remain, MIES provide a low-cost portable detection method suitable for on-site BPA monitoring in diverse sectors. Further optimization of sensor fabrication and characterization will enable the immense potential of MIES for field-based BPA detection.

Recent Advances in Metal-Organic Frameworks (MOFs) and Their Composites for Non-Enzymatic Electrochemical Glucose Sensors

In recent years, with pressing needs such as diabetes management, the detection of glucose in various substrates has attracted unprecedented interest from researchers in academia and industry. As a relatively new glucose sensor, non-enzymatic target detection has the characteristics of high sensitivity, good stability and simple manufacturing process. However, it is urgent to explore novel materials with low cost, high stability and excellent performance to modify electrodes. Metal-organic frameworks (MOFs) and their composites have the advantages of large surface area, high porosity and high catalytic efficiency, which can be utilized as excellent materials for electrode modification of non-enzymatic electrochemical glucose sensors. However, MOFs and their composites still face various challenges and difficulties that limit their further commercialization. This review introduces the applications and the challenges of MOFs and their composites in non-enzymatic electrochemical glucose sensors. Finally, an outlook on the development of MOFs and their composites is also presented.

Mn3O4/NiO Nanoparticles Decorated on Carbon Nanofibers as an Enzyme-Free Electrochemical Sensor for Glucose Detection

Transition metal oxides have garnered a lot of attention in the field of electrocatalysis along with their unique crystal structure and excellent catalytic properties. In this study, carbon nanofibers (CNFs) decorated with Mn₃O₄/NiO nanoparticles were made using electrospinning and calcination. The conductive network constructed by CNFs not only facilitates electron transport, but also provides landing sites for nanoparticles, thus reducing nanoparticle aggregation and exposing more active sites. Additionally, the synergistic interaction between Mn₃O₄ and NiO improved electrocatalytic capacity for glucose oxidation. The Mn₃O₄/NiO/CNFs modified glassy carbon electrode shows satisfactory results in terms of linear range and anti-interference capability for glucose detection, suggesting that the constructed enzyme-free sensor has a promising application in clinical diagnosis.

Detection and Degradation Studies of Nile Blue Sulphate Using Electrochemical and UV-Vis Spectroscopic Techniques

An efficient and reliable electrochemical sensing platform based on COOH-fMWCNTs modified GCE (COOH-fMWCNTs/GCE) was designed for the detection of nanomolar concentration of Nile Blue Sulphate (NBS). In comparison to the bare GCE, the electrochemical sensing scaffold considerably enhanced the peak current response of NBS dye as confirmed from the results of voltammetric investigations. The electrochemical approach of detecting NBS in the droplet of its solution dried over the surface of modified electrode validated, the role of modifier in enhancing the sensing response. Under optimized conditions, the designed electrochemical platform demonstrated a wide linearity range (0.03–10 μM) for NBS, with LOD of 1.21 nM. Moreover, COOH-fMWCNTs/GCE was found reproducible and stable as confirmed by repeatability and inter-day durability tests. The selectivity of the designed sensing matrix was ensured by anti-interference tests. The photocatalytic degradation of NBS dye was carried out by using TiO2 nanoparticles as photocatalyst in the presence of H2O2. UV-visible spectroscopic studies revealed 95% photocatalytic degradation of NBS following a pseudo-first-order kinetics with a rate constant of 0.028 min−1. These findings were supported electrochemically by monitoring the photocatalytically degraded dye at the designed sensing platform. The color variation and final decolorization of the selected dye in water served as a visual indicator of the degradation process. To conclude, the designed sensing platform immobilized with COOH-fMWCNTs imparted improved selectivity and sensitivity to detect and to, monitor the photocatalytic degradation of NBS.