Investigation of transport properties of 6FDA-durene polymeric membrane for landfill gas application using molecular simulation approach

Unveiling Local Dynamics of a Triptycene-Based Porous Polymer by Solid-State NMR

Membrane-based technologies for gas separation and capture are promising low-energy alternatives to the most common energy-consuming processes such as distillation and absorption. In this frame, porous polymers are attracting considerable interest, but issues related to a trade-off between permeability and selectivity as well as to the long-term stability of the membrane performances need to be overcome. To this end, the study of local dynamics is crucial as it directly correlates with the transport and separation characteristics of polymer-based membranes while also shedding light on plasticization and physical aging phenomena. This work presents a comprehensive characterization of the dynamic properties of a triptycene-based porous polymer with potential application in membrane-based gas separation technology by means of molecular dynamics (MD) simulations and solid-state NMR (SSNMR). The investigated polymer has triptycene-based structural repeating units bearing t-butyl groups that are connected by perfluorinated biphenyl repeats. The combination of different SSNMR variable temperature experiments including measurements of 1H, 13C, and 19F spin-spin and spin-lattice relaxation times, 1H-13C and 19F-13C dipolar chemical shift correlation experiments, and 2H experiments provided selective and detailed information on the molecular motions involving the t-butyl, triptycene, and perfluorinated biphenyl groups. A synergistic analysis of the acquired data, employing theoretical dynamic models and comparisons with MD simulations and calculated potential energy scans (PES), has enabled the determination of motion parameters, including activation energies and correlation times. This approach also yielded insights into the motion amplitudes and geometry. These findings can be valuable for future research aimed at elucidating the molecular origins of membrane performance, not only for the polymer under investigation but also for similar polymer-based membranes.

Molecular Dynamics Simulations of Gas Transport Properties in Cross-Linked Polyamide Membranes: Tracing the Morphology and Addition of Silicate Nanotubes

This study employs molecular dynamics (MD) simulations to fundamentally provide insight into the role of cross-link density in the CO2 separation properties of interfacially polymerized polyamide (PA) membranes. For this purpose, two atomistic models of pure polyamide membranes with different cross-link densities are constructed by MD simulations to conceptually determine how the fractional free volume of polyamide affects the gas separation performance of the membrane. The PA membrane with a lower cross-link density (LCPA) shows a higher gas diffusion coefficient, a lower gas solubility coefficient, and a higher gas permeability than the PA membrane with a higher cross-link density (HCPA). Moreover, the pristine and modified silicate nanotubes (SNTs) as the fast gas transport channels are incorporated into the polyamide membranes to assess the effect of the SNT/PA interface chemistry on the CO2 separation properties of the membranes. SNTs are systematically modified by three modifying agents with different CO2-philic groups and different interfacial interaction energies with the polyamide matrix. The results of MD simulations demonstrate that the incorporation of silicate nanotubes into the PA matrix increases the gas diffusivity and permeability and decreases the CO2/gas selectivity. Moreover, the membranes containing modified SNTs possessing high CO2-philicity and high SNTs/PA interfacial interactions show a high CO2 separation performance.

Efficient Fabrication of Self-Assembled Polylactic Acid Colloidosomes for Pesticide Encapsulation

Colloidosomes are microcapsules whose shells are composed of cumulated or fused colloidal particles. When colloidosomes are used for in situ encapsulation, it is still a challenge to achieve a high encapsulation efficiency and controllable release by an effective fabrication method. Herein, we present a highly efficient route for the large-scale preparation of colloidosomes. The biodegradable polylactic acid (PLA) nanoparticles (NPs) as shell materials can be synthesized using an antisolvent precipitation method, and the possible formation mechanism was given through the molecular dynamics (MD) simulation. The theoretical values are basically consistent with the experimental results. Through the use of the modified and unmodified PLA NPs, the colloidosomes with controllable shell porosities can be easily constructed using spray drying technology. We also investigate the mechanism of colloidosomes successfully self-assembled by PLA NPs with various factors of inlet temperature, feed rate, and flow rates of compressed air. Furthermore, avermectin (AVM) was used as a model for in situ encapsulation and a controllable release. The spherical modified colloidosomes encapsulating AVM not only achieve a small mean diameter of 1.57 μm but also realize a high encapsulation efficiency of 89.7% and impermeability, which can be further verified by the MD simulation. AVM molecules gather around and clog the shell pores during the evaporation of water molecules. More importantly, the PLA colloidosomes also reveal excellent UV-shielding properties, which can protect AVM from photodegradation.

A comprehensive review on zeolite-based mixed matrix membranes for CO2/CH4 separation

Biogas consisting of carbon dioxide/methane (CO₂/CH₄) gas mixtures has emerged as an alternative renewable fuel to natural gas. The presence of CO₂ can decrease the calorific value and generate greenhouse gas. Hence, separating CO₂ from CH₄ is a vital step in enhancing the use of biogas. Zeolite and zeolite-based mixed matrix membrane (MMM) is considered an auspicious candidate for CO₂/CH₄ separation due to thermal and chemical stability. This review initially addresses the development of zeolite and zeolite-based MMM for the CO₂/CH₄ separation. The highest performance in terms of CO₂ permeance and CO₂/CH₄ selectivity was achieved using zeolite and zeolite-based MMM, which exhibited CO₂ permeance in the range of 2.0 × 10^{- 7}-7.0 × 10^{- 6} mol m^{- 2} s^{- 1} Pa^{- 1} with CO₂/CH₄ selectivity ranging from 3 to 300. Current trends directed toward improving CO₂/CH₄ selectivity via modification methods including post-treatment, ion-exchanged, amino silane-grafted, and ionic liquid encapsulated of zeolite-based MMM. Those modification methods improved the defect-free and interfacial adhesions between zeolite particulates and polymer matrices and subsequently enhanced the CO₂/CH₄ selectivity. The modifications via ionic liquid and silane methods more influenced the CO₂/CH₄ selectivity with 90 and 660, respectively. This review also focuses on the possible applications of zeolite-based MMM, which include the purification and treatment of water as well as biomedical applications. Lastly, future advances and opportunities for gas separation applications are also briefly discussed. This review aims to share knowledge regarding zeolite-based MMM and inspire new industrial applications.