Carbon-based nanomaterial intervention and efficient removal of various contaminants from effluents - A review

Biomonitoring and phytoremediation potential of Conocarpus erectus (Buttonwood) for mitigating air pollution from highway traffic

This study investigates the impact of vehicular-released heavy metals (Zn, Fe, Pb, Cd, and Ni) on foliar physiological and biochemical parameters of Conocarpus erectus and its relationship with the Air Pollution Tolerance Index (APTI). Leaf samples were collected from six sites along a busy road (Bahawalpur to Rahim Yar Khan, KLP Road) in Punjab, Pakistan, during the spring season, with control samples taken 50 m away from the roadside. Heavy metal concentrations were analyzed using an Atomic Absorption Spectrophotometer (AAS), revealing significantly higher levels of Pb, Cd, Ni, and Cu in leaf dust at polluted sites, particularly in Ahmadpur. Exposure to heavy metal pollution led to notable reductions in shoot length, leaf area, and biomass, with Khanbella exhibiting the most severe declines. Gas exchange parameters were altered, with increased CO2 assimilation and stomatal conductance at Taranda, while transpiration rates decreased across polluted sites. Biochemical responses, including elevated total soluble proteins, free amino acids, and ascorbic acid, indicated adaptive metabolic shifts. Photosynthetic pigments, particularly chlorophyll b and carotenoids, were significantly reduced under pollution stress, whereas antioxidant activity remained stable. Anatomical modifications, such as increased vascular bundle and cortical thickness at Taranda and Iqbalabad, reflected structural resilience. Stomatal density and area were significantly lower at polluted sites, suggesting regulatory adjustments to minimize water loss. APTI values (12.21-9.98) were significantly higher at roadside locations compared to controls, highlighting the strong resilience of C. erectus to pollution. The species high APTI values and capacity to tolerate heavy metal contamination suggest its suitability for urban roadside plantations, where it can mitigate the adverse effects of vehicular emissions and contribute to environmental sustainability.

Nanoscale water behavior and its impact on adsorption: A case study with CNTs and diclofenac

Water is a fundamental component of life, playing a critical role in regulating metabolic processes and facilitating the dissolution and transport of essential molecules. However, emerging contaminants, such as pharmaceuticals, pose significant challenges to water quality and safety. Nanomaterial-based technologies emerge as a promising solution for removing those contaminants from water. Nevertheless, interfacial water plays a major role in the adsorption of chemical compounds in nanomaterials-as it plays in biological processes such as protein folding, enzyme activity, and drug delivery. To understand this role, in this study, we employ molecular dynamics simulations to explore the adsorption dynamics of potassium diclofenac on single-walled carbon nanotubes (SWCNTs) and double-walled carbon nanotubes (DWCNTs), considering both dry and wet conditions. Our findings reveal that the structuring of water molecules around CNTs creates hydration layers that significantly influence the accessibility of active sites and the interaction strength between contaminants and adsorbents. Our analysis indicates higher energy barriers for adsorption in DWCNTs compared to SWCNTs, which is attributed to stronger water-surface interactions. This research highlights the importance of understanding nanoscale water behavior for optimizing the design and functionality of nanomaterials for water purification. These findings can guide the development of more efficient and selective nanomaterials, enhancing contaminant removal and ensuring safer water resources while contributing to a deeper understanding of fundamental biological interactions.

Boosted photocatalytic performance of cobalt ferrite anchored g-C3N4 nanocomposite toward various emerging environmental hazardous pollutants degradation: insights into stability and Z-scheme mechanism

In this study, a highly efficient CoFe2O4-anchored g-C3N4 nanocomposite with Z-scheme photocatalyst was developed by facile calcination and hydrothermal technique. To evaluate the crystalline structure, sample surface morphology, elemental compositions, and charge conductivity of the as-synthesized catalysts by various characterization techniques. The high interfacial contact of CoFe2O4 nanoparticles (NPs) with g-C3N4 nanosheets reduced the optical bandgap from 2.67 to 2.5 eV, which improved the charge carrier separation and transfer. The photo-degradation of methylene blue (MB) and rhodamine B (Rh B) aqueous pollutant suspension under visible-light influence was used to investigate the photocatalytic degradation activity of the efficient CoFe2O4/g-C3N4 composite catalyst. The heterostructured spinel CoFe2O4 anchored g-C3N4 photocatalysts (PCs) with Z-scheme show better photocatalytic degradation performance for both organic dyes. Meanwhile, the efficiency of aqueous MB and Rh B degradation in 120 and 100 min under visible-light could be up to 91.1% and 73.7%, which is greater than pristine g-C3N4 and CoFe2O4 catalysts. The recycling stability test showed no significant changes in the photo-degradation activity after four repeated cycles. Thus, this work provides an efficient tactic for the construction of highly efficient magnetic PCs for the removal of hazardous pollutants in the aquatic environment.

From Nature to Technology: Exploring the Potential of Plant-Based Materials and Modified Plants in Biomimetics, Bionics, and Green Innovations

This review explores the extensive applications of plants in areas of biomimetics and bioinspiration, highlighting their role in developing sustainable solutions across various fields such as medicine, materials science, and environmental technology. Plants not only serve essential ecological functions but also provide a rich source of inspiration for innovations in green nanotechnology, biomedicine, and architecture. In the past decade, the focus has shifted towards utilizing plant-based and vegetal waste materials in creating eco-friendly and cost-effective materials with remarkable properties. These materials are employed in making advancements in drug delivery, environmental remediation, and the production of renewable energy. Specifically, the review discusses the use of (nano)bionic plants capable of detecting explosives and environmental contaminants, underscoring their potential in improving quality of life and even in lifesaving applications. The work also refers to the architectural inspirations drawn from the plant world to develop novel design concepts that are both functional and aesthetic. It elaborates on how engineered plants and vegetal waste have been transformed into value-added materials through innovative applications, especially highlighting their roles in wastewater treatment and as electronic components. Moreover, the integration of plants in the synthesis of biocompatible materials for medical applications such as tissue engineering scaffolds and artificial muscles demonstrates their versatility and capacity to replace more traditional synthetic materials, aligning with global sustainability goals. This paper provides a comprehensive overview of the current and potential uses of living plants in technological advancements, advocating for a deeper exploration of vegetal materials to address pressing environmental and technological challenges.

Emerging Trends in Nanomedicine: Carbon-Based Nanomaterials for Healthcare

Carbon-based nanomaterials, such as carbon quantum dots (CQDs) and carbon 2D nanosheets (graphene, graphene oxide, and graphdiyne), have shown remarkable potential in various biological applications. CQDs offer tunable photoluminescence and excellent biocompatibility, making them suitable for bioimaging, drug delivery, biosensing, and photodynamic therapy. Additionally, CQDs' unique properties enable bioimaging-guided therapy and targeted imaging of biomolecules. On the other hand, carbon 2D nanosheets exhibit exceptional physicochemical attributes, with graphene excelling in biosensing and bioimaging, also in drug delivery and antimicrobial applications, and graphdiyne in tissue engineering. Their properties, such as tunable porosity and high surface area, contribute to controlled drug release and enhanced tissue regeneration. However, challenges, including long-term biocompatibility and large-scale synthesis, necessitate further research. Potential future directions encompass theranostics, immunomodulation, neural interfaces, bioelectronic medicine, and expanding bioimaging capabilities. In summary, both CQDs and carbon 2D nanosheets hold promise to revolutionize biomedical sciences, offering innovative solutions and improved therapies in diverse biological contexts. Addressing current challenges will unlock their full potential and can shape the future of medicine and biotechnology.

One-pot synthesis of g-C3N4/N-doped CeO2 nanocomposites and their potential visible light-driven photocatalytic degradation of methylene blue dye

In the pursuit of efficient photocatalytic materials for environmental applications, a new series of g-C3N4/N-doped CeO2 nanocomposites (g-C3N4/N-CeO2 NCs) was synthesized using a straightforward dispersion method. These nanocomposites were systematically characterized to understand their structural, optical, and chemical properties. The photocatalytic performance of g-C3N4/N-CeO2 NCs was evaluated by investigating their ability to degrade methylene blue (MB) dye, a model organic pollutant. The results demonstrate that the integration of g-C3N4 with N-doped CeO2 NCs reduces the optical energy gap compared to pristine N-doped CeO2, leading to enhanced photocatalytic efficiency. It is benefited from the existence of g-C3N4/N-CeO2 NCs not only in promoting the charge separation and inhibits the fast charge recombination but also in improving photocatalytic oxidation performance. Hence, this study highlights the potential of g-C3N4/N-CeO2 NCs as promising candidates for various photocatalytic applications, contributing to the advancement of sustainable environmental remediation technologies.

Molecularly imprinted polymers and porous organic frameworks based analytical methods for disinfection by-products in water and wastewater

Disinfection by-products (DBPs) with heritage toxicity, mutagenicity and carcinogenicity are one kind of important new pollutants, and their detection and removal in water and wastewater has become a common challenge facing mankind. Advanced functional materials with ideal selectivity, adsorption capacity and regeneration capacity provide hope for the determination of DBPs with low concentration levels and inherent molecular structural similarity. Among them, molecularly imprinted polymers (MIPs) are favored, owing to their predictable structure, specific recognition and wide applicability. Also, metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs) with unique pore structure, large specific surface area and easy functionalization, attract increasing interest. Herein, we review recent advances in analytical methods based on the above-mentioned three functional materials for DBPs in water and wastewater. Firstly, MIPs, MOFs and COFs are briefly introduced. Secondly, MIPs, MOFs and COFs as extractants, recognition element and adsorbents, are comprehensively discussed. Combining the latest research progress of solid-phase extraction (SPE), sensor, adsorption and nanofiltration, typical examples on MIPs and MOFs/COFs based analytical and removal applications in water and wastewater are summarized. Finally, the application prospects and challenges of the three functional materials in DBPs analysis are proposed to promote the development of corresponding analytical methods.

Synthesis of iron oxide nanoparticles using orange fruit peel extract for efficient remediation of dye pollutant in wastewater

The removal of color-causing compounds from wastewater is a significant challenge that industries encounter due to their toxic, carcinogenic, and harmful properties. Despite the extensive research and development of various techniques with the objective of effectively degrading color pollutants, the challenge still persists. This paper introduces a simple technique for producing iron oxide nanoparticles (Fe2O3 NPs) using orange fruit peel for sustainable dye degradation in aqueous environment. The observation of color change and the measurement of UV-visible absorbance at 240 nm provided a confirmation for the development of Fe2O3 NPs. Transmission electron microscopy examination demonstrated that the Fe2O3 NPs have an agglomerated distribution and forming spherical structures with size ranging from 25-80 nm. Energy-dispersive X-ray spectroscopy analysis supported the existence of Fe and O. Fourier transform infrared spectroscopy conducted to investigate the involvement of orange peel extract in the reduction, capping, and synthesis of Fe2O3 NPs from the precursor salt. Fe2O3 NPs showed a photocatalytic remediation of 97%, for methylene blue under visible light irradiation. Additionally, prepared NPs exhibited concentration depended biofilm inhibition action against E. coli and S. aureus. In conclusion, Fe2O3 NPs can efficiently purify water and suppress pathogens due to their strong degrading activity, reusability, and biofilm inhibition property.

Advancement in nanomaterials for environmental pollutants remediation: a systematic review on bibliometrics analysis, material types, synthesis pathways, and related mechanisms

Environmental pollution is a major issue that requires effective solutions. Nanomaterials (NMs) have emerged as promising candidates for pollution remediation due to their unique properties. This review paper provides a systematic analysis of the potential of NMs for environmental pollution remediation compared to conventional techniques. It elaborates on several aspects, including conventional and advanced techniques for removing pollutants, classification of NMs (organic, inorganic, and composite base). The efficiency of NMs in remediation of pollutants depends on their dispersion and retention, with each type of NM having different advantages and disadvantages. Various synthesis pathways for NMs, including traditional synthesis (chemical and physical) and biological synthesis pathways, mechanisms of reaction for pollutants removal using NMs, such as adsorption, filtration, disinfection, photocatalysis, and oxidation, also are evaluated. Additionally, this review presents suggestions for future investigation strategies to improve the efficacy of NMs in environmental remediation. The research so far provides strong evidence that NMs could effectively remove contaminants and may be valuable assets for various industrial purposes. However, further research and development are necessary to fully realize this potential, such as exploring new synthesis pathways and improving the dispersion and retention of NMs in the environment. Furthermore, there is a need to compare the efficacy of different types of NMs for remediating specific pollutants. Overall, this review highlights the immense potential of NMs for mitigating environmental pollutants and calls for more research in this direction.

Cobalt oxide coupled with graphitic carbon nitride composite heterojunction for efficient Z-scheme photocatalytic environmental pollutants degradation performance

The Co3O4/g-C3N4 Z-scheme composite heterojunction has been effectively built in a facile sonication-assisted hydrothermal manner. The as-synthesized optimal 0.2 M Co3O4/g-C3N4 (GCO2) composite photocatalysts (PCs) revealed admirable degradation efficiency towards methyl orange (MO, 65.1%) and methylene blue (MB, 87.9%) organic pollutant compared with bare g-C3N4 within 210 min under light irradiation. Besides, the features of investigating structural, morphological and optical properties have evidence that the unique decoration effect of Co3O4 nanoparticles (NPs) on the g-C3N4 structure with intimate interface heterojunction of well-matched band structures noticeably facilitates the photo-generated charge transport/separation efficiency, reduces the recombination rates and widens the visible-light fascination which could advantageous to upgrading photocatalytic action with superior redox ability. Especially, the probable Z-scheme photocatalytic mechanism pathway is also elucidated in detail based on the quenching results. Hence, this work delivers a facile and hopeful candidate for contaminated water remediation via visible-light photocatalysis over the efficient g-C3N4-based catalysts.

Synergistic influence of vanadium pentoxide-coupled graphitic carbon nitride composite for photocatalytic degradation of organic pollutant: Stability and involved Z-scheme mechanism

The removal of dyes from wastewater by photocatalytic technologies has received substantial attention in recent years. In the present study, novel Z-scheme V2O5/g-C3N4 photocatalytic composites were organized via simple hydrothermal processes and a sequence of several characterization aspects. The degradation results showed that the optimum Z-scheme GVO2 heterostructure composite photocatalysts (PCs) had a better efficiency (90.1%) and an apparent rate (0.0136 min-1) for the methylene blue (MB) aqueous organic dye degradation, which was about 6.18-fold higher than that of pristine GCN catalyst. Meanwhile, the GVO2 heterostructured PCs showed better recycling stability after five consecutive tests. Moreover, the free radical trapping tests established that •O2- and h+ species were the prime reactive species in the photocatalytic MB degradation process in the heterostructured PCs. The photocatalytic enhanced activity was primarily recognized as the synergistic interfacial construction of the Z-scheme heterojunctions among V2O5 and GCN, which improved the separation/transfer, lower recombination rate, extended visible-light utilization ability, and enhanced reaction rate. Therefore, the existing study affords a simple tactic for the development of a direct Z-scheme for photocatalytic heterojunction nanomaterials for potential environmental remediation applications.

Geometry-Gradient Magnetocontrollable Lubricant-Infused Microwall Array for Passive/Active Hybrid Bidirectional Droplet Transport

Manipulation of droplets has increasingly garnered global attention, owing to its multifarious potential applications, including microfluidics and medical diagnostic tests. To control the droplet motion, geometry-gradient-based passive transport has emerged as a well-established strategy, which induces a Laplace pressure difference based on the droplet radius differences in confined state and transport droplets with no consumption of external energy, whereas this transportation method has inevitably shown some critical limitations: unidirectionality, uncontrollability, short moving distance, and low velocity. Herein, a magnetocontrollable lubricant-infused microwall array (MLIMA) is designed as a key solution to this issue. In the absence of a magnetic field, droplets can spontaneously travel from the tip toward the root of the structure as a result of the geometry-gradient-induced Laplace pressure difference. When the subject of an external magnetic field, the microwalls bend and overlap sequentially, ultimately resulting in the formation of a continuous slippery meniscus surface. The formed meniscus surface can exert sufficient propulsive force to surmount the Laplace pressure difference of the droplet, thereby effectuating active transport. Through the continuous movement of the microwalls, droplets can be actively transported against the Laplace pressure difference from the root to the tip side of the MLIMA or continue to actively move to the root after finishing the passive self-transport. This work demonstrates passive/active hybrid bidirectional droplet transport capabilities, validates its feasibility in the accurate control of droplet manipulation, and exhibits great potential in chemical microreactions, bioassays, and the medical field.

Iron-engineered mesoporous biocarbon composite and its adsorption, activation, and regeneration approach for removal of paracetamol in water

Three-dimensional multi-porous Iron Oxide/carbon (Fe₂O₃/C) composites derived from tamarind shell biomass were synthesized by a single-step co-pyrolysis technique and utilized for Paracetamol (PAC) dismissal in the combined adsorption, and advanced oxidation such as electrochemical regeneration techniques. The Fe₂O₃/C composites were prepared by different pyrolysis temperatures, and named as TS750 (without Fe₂O₃at 750 °C), MTS450 BCs (Low-450 °C), MTS600 BCs (Moderate-600 °C) and MTS750 BCs (high-750 °C), respectively. As-prepared Fe₂O₃/C composite was characterized by FE-SEM, XRD, BET, and XPS analysis. The specific surface area and the spatial interaction between the interlayers of Fe₂O₃ and C were significantly improved by increasing the pyrolysis temperatures from 450 to 750 °C, which improved the adsorption capacity of Fe₂O₃/C composites in terms of higher rate constants and chemisorption kinetics. The Pseudo-second-order kinetics model fitted in the adsorption test results of Fe₂O₃/C composites with the highest correlation co-efficiency. The Langmuir-isotherms model fitted in the adsorption test of the TS750 and MTS450 BCs. The Freundlich isotherms model is more fit with MTS600 and MTS750 BCs. Based on the isotherm results, the MTS750 BCs achieved 46.9 mg/g of maximum PAC adsorption capacity. The optimized MTS750 composites could be completely recovered by using an advanced electrochemical oxidation regeneration approach within 180 min. Also, with the adsorption and recovery process, the TOC removal rate improved to ∼79.4%. After the 6th cycle electrochemical oxidation process, the obtained results of the re-adsorption test showed the stabile adsorption activity of the sorbent material. The data outcomes herein propose that this type of combined adsorption and electrochemical approach will be useful in commercial water treatment plants.

Development of silver oxide-loaded reduced graphene oxide nanohybrids for enhanced photocatalytic activity under visible light in aqueous solutions

We report on the synthesis of silver oxide/reduced graphene oxide nanocomposites (Ag/rGO NCs) using a hydrothermal technique. This paper presents a simple method for synthesizing Ag/rGO hybrid nanocomposites, which can be used for environmentally treating hazardous organic pollutants. The photocatalytic degradation of model artificial Rhodamine B dye and bisphenol A was assessed under visible light illumination. The crystallinity, binding energy, and surface morphologies of the synthesized samples were determined. The silver oxide loading sample resulted in a decrease in the rGO crystallite size. SEM and TEM images demonstrate strong adhesion of the Ag NPs to the rGO sheets. XPS analysis validated the binding energy and elemental composition of the Ag/rGO hybrid nanocomposites. The objective of the experiment was to enhance the photocatalytic efficiency of rGO in the visible region using Ag nanoparticles. The synthesized nanocomposites in the visible region exhibited good photodegradation percentages of approximately 97.5% and 98.6% after 120 min of irradiation for pure rGO, Ag NPs, and Ag/rGO nanohybrid, respectively. Furthermore, the Ag/rGO nanohybrid maintained their degradation ability for up to three cycles. The synthesized Ag/rGO nanohybrid demonstrated enhanced photocatalytic activity, expanding their potential for environmental remediation. Based on the investigations, Ag/rGO nanohybrid proved to be an effective photocatalyst and holds promise as an ideal material for future applications in preventing water pollution.

Development of biohybrid Ag2CrO4/rGO based nanocomposites with stable flotation properties as enhanced Photocatalyst for sewage treatment and antibiotic-conjugated for antibacterial evaluation

The proposed research outlines a facile method to synthesize Silver Chromate/reduced graphene oxide nanocomposites (Ag₂CrO₄/rGO NCs) with a narrow dissemination size for the ecological treatment of hazardous organic dyes. The photodegradation performance toward the decontamination of model artificial methylene blue dye was assessed under solar light irradiation. The crystallinity, particle size, recombination of photogenerated charge carriers, energy gap and surface morphologies of synthesized nanocomposites were determined. The experiment objective is to use rGO nanocomposites to increase Ag₂CrO₄ photocatalytic efficiency in the solar spectrum. Tauc plots of ultraviolet-visible (UV-vis) spectrum were used to calculate the optical bandgap energy of the produced nanocomposites ~1.52 eV, which resulted in a good photodegradation percentage of ~92 % after 60 min irradiation of Solar light. At the same time, pure Ag₂CrO₄ and rGO nanomaterials showed ~46 % and ~ 30 %, respectively. The ideal circumstances were discovered by investigating the effects of several parameters, including catalyst loading and different pH levels, on the degradation of dyes. However, the final composites maintain their ability to degrade for up to five cycles. According to the investigations, Ag₂CrO₄/rGO NCs are an effective photocatalyst and can be used as the ideal material to prevent water pollution. Furthermore, antibacterial efficacy for the hydrothermally synthesized nanocomposite was tested against gram-positive (+ve) bacteria viz. Staphylococcus aureus and gram-negative (-ve) bacteria viz. Escherichia coli. The maximum zone of inhibition for S. aureus and E. coli were 18.5 and 17 mm, respectively.

Photocatalytic degradation of organic pollutants and inactivation of pathogens under visible light via SnO2/rGO composites

The domains of environmental cleanup and pathogen inactivation are particularly interesting in nanocomposites (NCs) due to their exceptional physicochemical properties. Tin oxide/reduced graphene oxide nanocomposites (SnO₂/rGO NCs) have potential uses in the biological and environmental fields, but little is known about them. This study aimed to investigate the photocatalytic activity and antibacterial efficiency of the nanocomposites. The co-precipitation technique was used to prepare all the samples. XRD, SEM, EDS, TEM, and XPS analyses were employed to characterize the physicochemical properties of SnO₂/rGO NCs for structural analysis. The rGO loading sample resulted in a decrease in the crystallite size of SnO₂ nanoparticles. TEM and SEM images demonstrate the firm adherence of SnO₂ nanoparticles to the rGO sheets. The chemical state and elemental composition of the nanocomposites were validated by the XPS and EDS data. Additionally, the visible-light active photocatalytic and antibacterial capabilities of the synthesized nanocomposites were assessed for the degradation of Orange II and methylene blue, as well as the suppression of the growth of S. aureus and E. coli. As a result, the synthesized SnO₂/rGO NCs are improved photocatalysts and antibacterial agents, expanding their potential in the fields of environmental remediation and water disinfection.

Preparation of gallotannin loaded chitosan/zinc oxide nanocomposite for photocatalytic degradation of organic dye and antibacterial applications

Chitosan functionalization is a growing field of interest to enhance the unique characteristics of metal oxide nanoparticles. In this study, a facile synthesis method has been used to develop a gallotannin loaded chitosan/zinc oxide (CS/ZnO) nanocomposite. Initially, white color formation confirmed the formation, and physico-chemical natures of the prepared nanocomposite were examined using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM). Crystalline of CS amorphous phase and ZnO patterns were demonstrated by XRD. FTIR revealed the presence of CS and gallotannin bio-active groups in the formed nanocomposite. Electron microscopy study exhibited that the produced nanocomposite had an agglomerated sheets like morphology with an average size of 50-130 nm. Further, the produced nanocomposite was assayed for methylene blue (MB) degradation activity from aqueous solution. After 30 min of irradiation, the efficiency of nanocomposite degradation was found to be 96.64 %. Moreover, prepared nanocomposite showed a potential and concentration-dependent antibacterial activity against S. aureus. In conclusion, our findings revealed that prepared nanocomposite can be used as an excellent photocatalyst as well as a bactericidal agent in industrial and clinical sectors.

Synergistic role of metal oxide loading cocatalysts on photocatalytic degradation of organic pollutants and inactive bacteria over template-free ZnFe2O4 nanocubes

For wastewater treatment, a highly reliable and ecologically friendly oxidation method is always preferred. This work described the production of a new extremely effective visible light-driven Ag₂O_x loaded ZnFe₂O₄ nanocomposties photocatalyst using a wet impregnation technique. Under visible light irradiation, the produced Ag₂O_x loaded ZnFe₂O₄ nanocomposties were used in the photodegradation of rhodamine B (RhB) and Reactive Red 120 (RR120) dyes. Analysis using X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy revealed that Ag₂O_x nanoparticles were well dispersed on the surface of ZnFe₂O₄ NPs and that the Ag₂O_x loaded ZnFe₂O₄ NPs were created. When compared with bare ZnFe₂O₄ NPs, Ag₂O_x-loaded ZnFe₂O₄ nanocomposites showed better photocatalytic activity for RhB and RR120 degradation under visible light (>420 nm) illumination. The reaction kinetics and degradation methodology, in addition to the photocatalytic degradation functions of Ag₂O_x-loaded ZnFe₂O₄ nanocomposites, were thoroughly investigated. The 3 wt% Ag₂O_x loaded ZnFe₂O₄ nanocomposites have a 99% removal efficiency for RhB and RR120, which is about 2.4 times greater than the ZnFe₂O₄ NPs and simple combination of 1 wt% and 2 wt% Ag₂O_x loaded ZnFe₂O₄ nanocomposites. Furthermore, the 3 wt% Ag₂O_x loaded ZnFe₂O₄ nanocomposites demonstrated consistent performance without decreasing activity throughout 3 consecutive cycles, indicating a potential approach for the photo-oxidative destruction of organic pollutants as well as outstanding antibacterial capabilities. According to the findings of the experiments, produced new nanoparticles are an environmentally friendly, cost-efficient option for removing dyes, and they were successful in suppressing the development of Gram-negative and Gram-positive bacteria.