ZIF-67 blended PVDF membrane for improved Congo red removal and antifouling properties: A correlation establishment between morphological features and ultra-filtration parameters

Electrospun ZIF-67/PVDF composite membranes for efficient ciprofloxacin removal from wastewater

Cobalt 2-methylimidazole (ZIF-67) has been broadly explored for its applications in the treatment of antibiotics in wastewater. However, ZIF-67 in powder form is difficult to recover. In the study, ZIF-67 and Polyvinylidene Fluoride (PVDF) were blended via electrospinning to prepare ZIF-67/PVDF membrane for adsorption of ciprofloxacin (CIP). The ZIF-67/PVDF membrane demonstrated outstanding adsorption efficiency for CIP, with a maximum adsorption capability of 4087.5 μg cm-2. The adsorption performance of ZIF-67/PVDF remains stable across a wide pH range and is unaffected by ionic interference. The ZIF-67/PVDF adsorbent follows pseudo-second-order kinetics and the Langmuir model. Furthermore, thermodynamic research indicates the adsorption of CIP is a spontaneous and exothermic process. It is proposed that the adsorption mechanism of CIP onto ZIF-67/PVDF involves electrostatic interactions, hydrogen bonding, π-π interactions, coordination bonding, and hydrophobic interactions.

Assembly of Chitosan/Caragana Fibers to Construct an Underwater Superelastic 2D Layer-Supported 3D Architecture for Rapid Congo Red Removal

Developing environmentally friendly bulk materials capable of easily and thoroughly removing trace amounts of dye pollutants from water to rapidly obtain clean water has always been a goal pursued by researchers. Herein, a green material with a 3D architecture and with strong underwater rebounding and fatigue resistance ability was prepared by means of the assembly of biopolymer chitosan (CS) and natural caraganate fibers (CKFs) under freezing conditions. The CKFs can randomly and uniformly distribute in the lamellar structure formed during the freezing process of CS and CKFs, playing a role similar to that of "steel bars" in concrete, thus providing longitudinal support for the 3D-architecture material. The 2D layers formed by CS and CKFs as the main basic units can provide the material with a higher strength. The 3D-architecture material can bear the compressive force of a weight underwater for multiple cycles, meeting the requirements for water purification. The underwater compression test shows that the 3D-architecture material can quickly rebound to its original shape after removing the stress. This 3D-architecture material can be used to purify dye-containing water. When its dosage is 3 g/L, the material can remove 99.65% of the Congo Red (CR) in a 50 mg/L dye solution. The adsorption performance of the 3D architecture adsorbent for CR removal in actual water samples (i.e., tap water, seawater) is superior than that of commercial activated carbon. Due to its porous block characteristics, this material can be used for the continuous and efficient treatment of wastewater containing trace amounts of CR dye to obtain pure clean water, meaning that it has great potential for the effective purification of dye wastewater.

Selective Detection of NH3 Gas by Ti3C2Tx Sensors with the PVDF-ZIF-67 Overlayer at Room Temperature

In the realm of NH3 gas-sensing applications, the electrically conductive nature of Ti3C2Tx MXene, adorned with surface terminations such as -O and -OH groups, renders it a compelling material. However, the inherent challenges of atmospheric instability and selectivity in the presence of gas mixtures have prompted the exploration of innovative solutions. This work introduces a strategic solution through the deposition of a mixed-matrix membrane (MMM) composed of poly(vinylidene fluoride) (PVDF) as the matrix and zeolitic imidazolate framework-67 (ZIF-67) as the filler. This composite membrane acts as a selective filter, permitting the passage of a specific gas, namely NH3. Leveraging the hydrophobic and chemically inert nature of PVDF, the MMM enhances the atmospheric stability of Ti3C2Tx by impeding water molecules from interacting with the MXene. Furthermore, ZIF-67 is selective to NH3 gas via acid-base interactions within the zeolite group and selective pore size. The Ti3C2Tx sensor embedded in the MMM filter exhibits a modest 1.3% change in the sensing response to 25 ppm of NH3 gas compared to the response without the filter. This result underscores the filter's effectiveness in conferring selectivity and diffusivity, particularly at 35% relative humidity (RH) and 25 °C. Crucially, the hydrophobic attributes of PVDF impart heightened stability to the Ti3C2Tx sensor even amidst varying RH conditions. These results not only demonstrate effective NH3 detection but also highlight the sensor's adaptability to diverse environmental conditions, offering promising prospects for practical applications.

Application and prospects of metal–organic frameworks in photocatalytic self-cleaning membranes for wastewater treatment

By loading photocatalytic MOF onto the separation membrane, the self-cleaning function of the membrane can be realized. This paper discusses the structure, synthesis, and properties of photocatalytic MOFs.