Efficient and Selective CO2 Reduction Integrated with Organic Synthesis by Solar Energy

Single-Atom Titanium on Mesoporous Nitrogen, Oxygen-Doped Carbon for Efficient Photo-thermal Catalytic CO2 Cycloaddition by a Radical Mechanism

Developing efficient and earth-abundant catalysts for CO2 fixation to high value-added chemicals is meaningful but challenging. Styrene carbonate has great market value, but the cycloaddition of CO2 to styrene oxide is difficult due to the high steric hindrance and weak electron-withdrawing ability of the phenyl group. To utilize clean energy (such as optical energy) directly and effectively for CO2 value-added process, we introduce earth-abundant Ti single-atom into the mesoporous nitrogen, oxygen-doped carbon nanosheets (Ti-CNO) by a two-step method. The Ti-CNO exhibits excellent photothermal catalytic activities and stability for cycloaddition of CO2 and styrene oxide to styrene carbonate. Under light irradiation and ambient pressure, an optimal Ti-CNO produces styrene carbonate with a yield of 98.3 %, much higher than CN (27.1 %). In addition, it shows remarkable stability during 10 consecutive cycles. Its enhanced catalytic performance stems from the enhanced photothermal effect and improved Lewis acidic/basic sites exposed by the abundant mesopores. The experiments and theoretical simulations demonstrate the styrene oxide⋅+ and CO2⋅- radicals generated at the Lewis acidic (Tiδ+) and basic sites of Ti-CNO under light irradiation, respectively. This work furnishes a strategy for synthesizing advanced single-atom catalysts for photo-thermal synergistic CO2 fixation to high value products via a cycloaddition pathway.

Supramolecularly modulated carbon-centered radicals: toward selective oxidation from benzyl alcohol to aldehyde

The reactivity of ketyl radicals and benzoyl radicals, two key intermediates of photo-induced oxidation of benzyl alcohol, can be stabilized by the host-guest interaction of the radicals with cucurbit[7]uril. As a result, the selectivity of photo-induced oxidation from benzyl alcohol to aldehyde is significantly improved by diminishing side reactions and inhibiting the generation of carboxylic acid products. This work presents a new route to modulate the reactivity of radical intermediates, enriching the chemistry of supramolecular intermediates and the toolbox of supramolecular catalysis.

Single-cluster Functionalized TiO2 Nanotube Array for Boosting Water Oxidation and CO2 Photoreduction to CH3OH

Solar-driven CO2 reduction and water oxidation to liquid fuels represents a promising solution to alleviate energy crisis and climate issue, but it remains a great challenge for generating CH3OH and CH3CH2OH dominated by multi-electron transfer. Single-cluster catalysts with super electron acceptance, accurate molecular structure, customizable electronic structure and multiple adsorption sites, have led to greater potential in catalyzing various challenging reactions. However, accurately controlling the number and arrangement of clusters on functional supports still faces great challenge. Herein, we develop a facile electrosynthesis method to uniformly disperse Wells-Dawson- and Keggin-type polyoxometalates on TiO2 nanotube arrays, resulting in a series of single-cluster functionalized catalysts P2M18O62@TiO2 and PM12O40@TiO2 (M=Mo or W). The single polyoxometalate cluster can be distinctly identified and serves as electronic sponge to accept electrons from excited TiO2 for enhancing surface-hole concentration and promote water oxidation. Among these samples, P2Mo18O62@TiO2-1 exhibits the highest electron consumption rate of 1260 μmol g-1 for CO2-to-CH3OH conversion with H2O as the electron source, which is 11 times higher than that of isolated TiO2 nanotube arrays. This work supplied a simple synthesis method to realize the single-dispersion of molecular cluster to enrich surface-reaching holes on TiO2, thereby facilitating water oxidation and CO2 reduction.

Hetero-Motif Molecular Junction Photocatalysts: A New Frontier in Artificial Photosynthesis

ConspectusTo cope with the increasingly global greenhouse effect and energy shortage, it is urgent to develop a feasible means to convert anthropogenic excess carbon dioxide (CO2) into energy resources. The photocatalytic CO2 reduction reaction (CO2RR) coupled with the water oxidation reaction (WOR), known as artificial photosynthesis, is a green, clean, and promoting strategy to deal with the above issues. Among the reported photocatalytic systems for CO2 reduction, the main challenge is to achieve WOR simultaneously due to the limited charge separation efficiency and complicated dynamic process. To address the problem, scientists have assembled two nanosemiconductor motifs for CO2RR and WOR into a heterojunction photocatalyst to realize artificial photosynthesis. However, it is difficult to clearly explore the corresponding catalytic mechanism and establish an accurate structure-activity relationship at the molecular level for their aperiodic distribution and complicated structural information. Standing on the shoulders of the heterojunction photocatalysts, a new-generation material, hetero-motif molecular junction (HMMJ) photocatalysts, has been developed and studied by our laboratory. A hetero-motif molecular junction is a class of crystalline materials with a well-defined and periodic structure, adjustable assembly mode, and semiconductor-like properties, which is composed of two predesigned motifs with oxidation and reduction, respectively, by coordination or covalent bonds. The intrinsic properties make these catalysts susceptible to functional modifications to improve light absorption and electrical conductivity. The small size and short distance of the motifs can greatly promote the efficiency of photogenerated electron-hole separation and migration. Based on these advantages, they can be used as potential excellent photocatalysts for artificial photosynthesis. Notably, the explicit structural information determined by single-crystal or powder X-ray diffraction can provide a visual platform to explore the reaction mechanism. More importantly, the connection number, spatial distance, interaction, and arrangement mode of the structural motifs can be well-designed to explore the detailed structure-activity relationship that can be hardly studied in nanoheterojunction photocatalyst systems. In this regard, HMMJ photocatalysts can be a new frontier in artificial photosynthesis and serve as an important bridge between molecular photocatalysts and solid photocatalysts. Thus, it is very important to summarize the state-of-the-art of the HMMJ photocatalysts used for artificial photosynthesis and to give in-depth insight to promote future development.In this Account, we have summarized the recent advances in artificial photosynthesis using HMMJ photocatalysts, mainly focusing on the results in our lab. We present an overview of current knowledge about developed photocatalytic systems for artificial photosynthesis, introduce the design schemes of the HMMJ photocatalysts and their unique advantages as compared to other photocatalysts, summarize the construction strategies of HMMJ photocatalysts and their application in artificial photosynthesis, and explain why hetero-motif molecular junctions can be promising photocatalysts and show that they provide a powerful platform for studying photocatalysis. The structure-activity relationship and charge separation dynamics are illustrated. Finally, we bring our outlook on present challenges and future development of HMMJ photocatalysts and their potential application prospects on other photocatalytic reaction systems. We believe that this Account will afford important insights for the construction of high-efficiency photocatalysts and guidance for the development of more photocatalytic systems in an atom-economic, environmentally friendly, and sustainable way.

Tailoring Charge Separation in ZnIn2S4@CdS Hollow Nanocages for Simultaneous Alcohol Oxidation and CO2 Reduction under Visible Light

Artificial photosynthesis provides a sustainable strategy for producing usable fuels and fine chemicals and attracts broad research interest. However, conventional approaches suffer from low reactivity or low selectivity. Herein, we demonstrate that photocatalytic reduction of CO2 coupled with selective oxidation of aromatic alcohol into corresponding syngas and aromatic aldehydes can be processed efficiently and fantastically over the designed S-scheme ZnIn2S4@CdS core-shell hollow nanocage under visible light. In the ZnIn2S4@CdS heterostructure, the photoexcited electrons and holes with weak redox capacities are eliminated, while the photoexcited electrons and holes with powder redox capacities are separated spatially and preserved on the desired active sites. Therefore, even if there are no cocatalysts and no vacancies, ZnIn2S4@CdS exhibits high reactivity. For instance, the CO production of ZnIn2S4@CdS is about 3.2 and 3.4 times higher than that of pure CdS and ZnIn2S4, respectively. More importantly, ZnIn2S4@CdS exhibits general applicability and high photocatalytic stability. Trapping agent experiments, 13CO2 isotopic tracing, in situ characterizations, and theoretical calculations reveal the photocatalytic mechanism. This study provides a new strategy to design efficient and selective photocatalysts for dual-function redox reactions by tailoring the active sites and regulating vector separation of photoexcited charge carriers.

Concurrent Ammonia Synthesis and Alcohol Oxidation Boosted by Glutathione-Capped Quantum Dots under Visible Light

Mother nature accomplishes efficient ammonia synthesis via cascade N2 oxidation by lightning strikes followed with enzyme-catalyzed nitrogen oxyanion (NOx -, x = 2,3) reduction. The protein environment of enzymatic centers for NOx --to-NH4 + process greatly inspires the design of glutathione-capped (GSH) quantum dots (QDs) for ammonia synthesis under visible light (440 nm) in tandem with plasma-enabled N2 oxidation. Mechanistic studies reveal that GSH induces positive shift of surface charge to strengthen the interaction between NOx - and QDs. Upon visible light irradiation of QDs, the balanced and rapid hole and electron transfer furnish GS·radicals for 2e-/2H+ alcohol oxidation and H·for 8e-/10H+ NO3 --to-NH4 + reduction simultaneously. For the first time, mmol-scale ammonia synthesis is realized with apparent quantum yields of 5.45% ± 0.64%, and gram-scale synthesis of value-added acetophenone and NH4Cl proceeds with 1:4 stoichiometry and stability, demonstrating promising multielectron and multiproton ammonia synthesis efficiency and sustainability with nature-inspired artificial photocatalysts.

Stabilizing electron-rich Ni single-atoms on black phosphorus nanosheets boosts photocatalytic carbon dioxide reduction

The development of unique single-atom catalysts with electron-rich feature is essential to promoting the photocatalytic CO2 reduction, yet remains a big challenge. Here, a conceptionally new single-atom catalyst constructed from atomically dispersed Ni-P3 species on black phosphorus (BP) nanosheets (BP-Ni) is synthesized for realizing highly efficient visible-light-driven CO2 reduction when trapping photogenerated electrons from homogeneous light absorbers in the presence of triethanolamine as the sacrificial agent. Both the experimental and theoretical calculation data reveal that the Ni-P3 species on BP nanosheets own the electron-rich feature that can improve the photogenerated charge separation efficiency and lower the activation barrier of CO2 conversion. This unique feature makes BP-Ni exhibit the much higher activity as cocatalyst in the photocatalytic CO2 reduction than BP nanosheets. The BP-Ni can also be applied as a cocatalyst for enhanced photocatalytic CO2 reduction after combining with CdSe/S colloidal crystal photocatalyst. The present study offers valuable inspirations for the design and construction of effective catalytic sites toward photocatalytic CO2 reduction reactions.

Shear Stress Triggers Ultrathin-Nanosheet Carbon Nitride Assembly for Photocatalytic H2O2 Production Coupled with Selective Alcohol Oxidation

Coupled photocatalysis without cocatalysts can maximize the utilization of photons and atoms, which puts forward higher demands on photocatalysts. Polymeric carbon nitride (CN) has become the most promising photocatalyst, but still suffers from major drawbacks of insufficient catalytic sites and low quantum efficiency. Herein, we report a fluid shear stress-assisted molecular assembly to prepare ultrathin-nanosheet-assembled acanthosphere-like CN (ASCN) with nitrogen vacancy (Nv) and carbonyl modification. Shear stress breaks the stacking interactions between layers and cuts the stacked structure into ultrathin layers, which are further reassembled into acanthosphere bundles driven by "centrifugal force". Benefitted greatly from the ultrathin nature that provides more exposed active sites and improves charge carrier separation, ASCN-3 exhibits a 20-fold higher activity than the bulk counterpart toward oxygen reduction to H2O2 coupled with 4-methoxybenzyl alcohol (4-MBA) oxidation to anisaldehyde (AA), with significantly increased turnover frequency (TOF) values (TOF: 1.69 h-1 for H2O2 and 1.02 h-1 for AA). Significantly, ASCN-3 exhibits 95.8% conversion for 4-MBA oxidation with nearly 100% selectivity. High apparent quantum yields of 11.7% and 9.3% at 420 nm are achieved for H2O2 photosynthesis and 4-MBA oxidation. Mechanism studies suggest that carbonyl induces holes concentrated at the neighboring melem unit to directly oxidize the Cα-H bond of 4-MBA to produce carbon radicals, and Nv as oxygen adsorption active site traps electrons to form a superoxide radical that further combines with the shed protons into H2O2. This work presents a simple physical method to break the layered stack of CN for creating hierarchical assembly for coupled photocatalysis.

Nanoscale Janus Z-Scheme Heterojunction for Boosting Artificial Photosynthesis

Artificial photosynthesis for CO2 reduction coupled with water oxidation currently suffers from low efficiency due to inadequate interfacial charge separation of conventional Z-scheme heterojunctions. Herein, an unprecedented nanoscale Janus Z-scheme heterojunction of CsPbBr3 /TiOx is constructed for photocatalytic CO2 reduction. Benefitting from the short carrier transport distance and direct contact interface, CsPbBr3 /TiOx exhibits significantly accelerated interfacial charge transfer between CsPbBr3 and TiOx (8.90 × 108 s-1 ) compared with CsPbBr3 :TiOx counterpart (4.87 × 107 s-1 ) prepared by traditional electrostatic self-assembling. The electron consumption rate of cobalt doped CsPbBr3 /TiOx can reach as high as 405.2 ± 5.6 µmol g-1 h-1 for photocatalytic CO2 reduction to CO coupled with H2 O oxidation to O2 under AM1.5 sunlight (100 mW cm-2 ), over 11-fold higher than that of CsPbBr3 :TiOx , and surpassing the reported halide-perovskite-based photocatalysts under similar conditions. This work provides a novel strategy to boost charge transfer of photocatalysts for enhancing the performance of artificial photosynthesis.

Engineering Single Cu Sites into Covalent Organic Framework for Selective Photocatalytic CO2 Reduction

Photocatalytic CO₂ conversion into value-added chemicals is a promising route but remains challenging due to poor product selectivity. Covalent organic frameworks (COFs) as an emerging class of porous materials are considered as promising candidates for photocatalysis. Incorporating metallic sites into COF is a successful strategy to realize high photocatalytic activities. Herein, 2,2'-bipyridine-based COF bearing non-noble single Cu sites is fabricated by chelating coordination of dipyridyl units for photocatalytic CO₂ reduction. The coordinated single Cu sites not only significantly enhance light harvesting and accelerate electron-hole separation but also provide adsorption and activation sites for CO₂ molecules. As a proof of concept, the Cu-Bpy-COF as a representative catalyst exhibits superior photocatalytic activity for reducing CO₂ to CO and CH₄ without photosensitizer, and impressively, the product selectivity of CO and CH₄ can be readily modulated only by changing reaction media. Experimental and theoretical results reveal the crucial role of single Cu sites in promoting photoinduced charge separation and solvent effect in regulating product selectivity, which provides an important sight onto the design of COF photocatalysts for selective CO₂ photoreduction.

Simultaneous co-Photocatalytic CO2 Reduction and Ethanol Oxidation towards Synergistic Acetaldehyde Synthesis

Photocatalytic conversion of CO₂ is of great interest but it often suffers sluggish oxidation half reaction and undesired by-products. Here, we report for the first the simultaneous co-photocatalytic CO₂ reduction and ethanol oxidation towards one identical value-added CH₃ CHO product on a rubidium and potassium co-modified carbon nitride (CN-KRb). The CN-KRb offers a record photocatalytic activity of 1212.3 μmol h^-1 g^-1 with a high selectivity of 93.3 % for CH₃ CHO production, outperforming all the state-of-art CO₂ photocatalysts. It is disclosed that the introduced Rb boosts the *OHCCHO fromation and facilitates the CH₃ CHO desorption, while K promotes ethanol adsorption and activation. Moreover, the H⁺ stemming from ethanol oxidation is confirmed to participate in the CO₂ reduction process, endowing near ideal overall atomic economy. This work provides a new strategy for effective use of the photoexcited electron and hole for high selective and sustainable conversion of CO₂ paired with oxidation reaction into identical product.

Cerium-based metal sulfide derived nanocomposite-embedded rGO as an efficient catalyst for photocatalytic application

Reduced graphene oxide (rGO) with metal sulfides is an efficient photocatalyst for treating textile effluent. Herein, a hydrothermal technique was used to synthesize transition metal sulfide with rGO nanocomposite. Under 120 min of sunlight exposure, the cerium-nickel sulfide/rGO nanocomposite (Ce₂S₃-NiS₂/rGO) photodegraded the methyl orange (MO) dye with an efficiency of 89.1% which is significantly higher than that of bare nickel sulfide (NiS₂) and cerium sulfide (Ce₂S₃) photocatalysts. Moreover, another model pollutant dye bromophenol blue (BP) was treated under the same experimental condition, and it has achieved about 84.2% degradation efficiency. The combination of NiS₂ and Ce₂S₃ improves the separation efficiency of photogenerated carriers, resulting in improved photocatalytic activity. In addition, ternary metal sulfide with rGO increases pollutant adsorption and electron-hole photogenerated pairs. Therefore, the mechanism of photocatalytic Ce₂S₃-NiS₂/rGO is investigated in detail. This research could pave the way for the development of capable and adaptable Ce₂S₃-NiS₂/rGO photocatalysts for environmental remediation.

Integrated solar-powered MEMS-based photoelectrochemical immunoassay for point-of-care testing of cTnI protein

Considering the fact that acute myocardial infarction has shown a trend towards younger age and has become a major health problem, it is necessary to develop rapid screening devices to meet the needs of community health care. Herein, we developed an artificial neural network-assisted solar-powered photoelectrochemical (SP-PEC) sensing platform for rapid screening of cardiac troponin I (cTnI) protein in the prognosis of patients with acute myocardial infarction (AMI) by integrating a self-powered photoelectric signal output system with low-cost screen-printed paper electrodes functionalized with ultrathin Bi₂O₂S (BOS) nanosheets. An integrated solar-powered PEC immunoassay with micro-electro-mechanical system (MEMS) was constructed without an excitation light source. The quantification of cTnI protein was obtained by the electrical signal changes caused by the electro-oxidation process of H₂O₂, generated by the classical split immune reaction, on the electrode surface. The test electrodes were developed as dual working electrodes, one for target cTnI testing and the other for evaluating light intensity, to reduce the temporal inconsistency of sunlight. The photoelectrodes were discovered to exhibit satisfactory negative response to target concentrations in the dynamic range of 2.0 pg mL^-1-10 ng mL^-1 since being regressed in an improved artificial neural network (ANN) model using the pooled dataset of target signals affected by the light source. The difference of hot electron and hole transfer behavior in different thickness of nano-materials was determined by finite element analysis (FEA), which provided a theoretical basis for the development of efficient PEC sensors. This work presents a unique perspective for the design of a revolutionary low-cost bioassay platform by inventively illuminating the PEC biosensor's component process without the use of light.

Single-Atom Nickel on Carbon Nitride Photocatalyst Achieves Semihydrogenation of Alkynes with Water Protons via Monovalent Nickel

Prospects in light-driven water activation have prompted rapid progress in hydrogenation reactions. We describe a Ni²⁺ -N₄ site built on carbon nitride for catalyzed semihydrogenation of alkynes, with water supplying protons, powered by visible-light irradiation. Importantly, the photocatalytic approach developed here enabled access to diverse deuterated alkenes in D₂ O with excellent deuterium incorporation. Under visible-light irradiation, evolution of a four-coordinate Ni²⁺ species into a three-coordinate Ni⁺ species was spectroscopically identified. In combination with theoretical calculations, the photo-evolved Ni⁺ is posited as HO-Ni⁺ -N₂ with an uncoordinated, protonated pyridinic nitrogen, formed by coupled Ni²⁺ reduction and water dissociation. The paired Ni-N prompts hydrogen liberation from water, and it renders desorption of alkene preferred over further hydrogenation to alkane, ensuring excellent semihydrogenation selectivity.

Crystal phase engineering of Ru for simultaneous selective photocatalytic oxidations and H2 production

Noble metal nanoparticles are often used as cocatalysts to enhance the photocatalytic efficiency. While the effect of cocatalyst nanoparticle size and shape has widely been explored, the effect of the crystal phase is largely overlooked. In this work, we investigate the effect of Ru nanoparticle crystal phase, specifically regular hexagonal close-packed (hcp) and allotropic face-centered cubic (fcc) crystal phases, as cocatalyst decorated onto the surface of TiO₂ photocatalysts. As reference photocatalytic reaction the simultaneous photocatalytic production of benzaldehyde (BAD) and H₂ from benzyl alcohol was chosen. Both the fcc Ru/TiO₂ and hcp Ru/TiO₂ composites exhibit enhanced BAD and H₂ production rates compared to pristine TiO₂ due to the formation of a Schottky barrier promoting the photogenerated charge separation. Moreover, a 1.9-fold photoactivity enhancement of the fcc Ru/TiO₂ composite is achieved as compared to the hcp Ru/TiO₂ composite, which is attributed to the fact that the fcc Ru NPs are more efficient in facilitating the charge transfer as compared to hcp Ru NPs, thus inhibiting the recombination of electron-hole pairs and enhancing the overall photoactivity.

Stabilization and Performance Enhancement Strategies for Halide Perovskite Photocatalysts

Solar-energy-powered photocatalytic fuel production and chemical synthesis are widely recognized as viable technological solutions for a sustainable energy future. However, the requirement of high-performance photocatalysts is a major bottleneck. Halide perovskites, a category of diversified semiconductor materials with suitable energy-band-enabled high-light-utilization efficiencies, exceptionally long charge-carrier-diffusion-length-facilitated charge transport, and readily tailorable compositional, structural, and morphological properties, have emerged as a new class of photocatalysts for efficient hydrogen evolution, CO₂ reduction, and various organic synthesis reactions. Despite the noticeable progress, the development of high-performance halide perovskite photocatalysts (HPPs) is still hindered by several key challenges: the strong ionic nature and high hydrolysis tendency induce instability and an unsatisfactory activity due to the need for a coactive component to realize redox processes. Herein, the recently developed advanced strategies to enhance the stability and photocatalytic activity of HPPs are comprehensively reviewed. The widely applicable stability enhancement strategies are first articulated, and the activity improvement strategies for fuel production and chemical synthesis are then explored. Finally, the challenges and future perspectives associated with the application of HPPs in efficient production of fuels and value-added chemicals are presented, indicating the irreplaceable role of the HPPs in the field of photocatalysis.

Heterostructure-Engineered Semiconductor Quantum Dots toward Photocatalyzed-Redox Cooperative Coupling Reaction

Semiconductor quantum dots have been emerging as one of the most ideal materials for artificial photosynthesis. Here, we report the assembled ZnS-CdS hybrid heterostructure for efficient coupling cooperative redox catalysis toward the oxidation of 1-phenylethanol to acetophenone/2,3-diphenyl-2,3-butanediol (pinacol) integrated with the reduction of protons to H₂. The strong interaction and typical type-I band-position alignment between CdS quantum dots and ZnS quantum dots result in efficient separation and transfer of electron-hole pairs, thus distinctly enhancing the coupled photocatalyzed-redox activity and stability. The optimal ZnS-CdS hybrid also delivers a superior performance for various aromatic alcohol coupling photoredox reaction, and the ratio of electrons and holes consumed in such redox reaction is close to 1.0, indicating a high atom economy of cooperative coupling catalysis. In addition, by recycling the scattered light in the near field of a SiO₂ sphere, the SiO₂-supported ZnS-CdS (denoted as ZnS-CdS/SiO₂) catalyst can further achieve a 3.5-fold higher yield than ZnS-CdS hybrid. Mechanistic research clarifies that the oxidation of 1-phenylethanol proceeds through the pivotal radical intermediates of ^•C(CH₃)(OH)Ph. This work is expected to promote the rational design of semiconductor quantum dots-based heterostructured catalysts for coupling photoredox catalysis in organic synthesis and clean fuels production.

A Comprehensive Review on Graphitic Carbon Nitride for Carbon Dioxide Photoreduction

Inspired by natural photosynthesis, harnessing the wide range of natural solar energy and utilizing appropriate semiconductor-based catalysts to convert carbon dioxide into beneficial energy species, for example, CO, CH₄ , HCOOH, and CH₃ COH have been shown to be a sustainable and more environmentally friendly approach. Graphitic carbon nitride (g-C₃ N₄ ) has been regarded as a highly effective photocatalyst for the CO₂ reduction reaction, owing to its cost-effectiveness, high thermal and chemical stability, visible light absorption capability, and low toxicity. However, weaker electrical conductivity, fast recombination rate, smaller visible light absorption window, and reduced surface area make this catalytic material unsuitable for commercial photocatalytic applications. Therefore, certain procedures, including elemental doping, structural modulation, functional group adjustment of g-C₃ N₄ , the addition of metal complex motif, and others, may be used to improve its photocatalytic activity towards effective CO₂ reduction. This review has investigated the scientific community's perspectives on synthetic pathways and material optimization approaches used to increase the selectivity and efficiency of the g-C₃ N₄ -based hybrid structures, as well as their benefits and drawbacks on photocatalytic CO₂ reduction. Finally, the review concludes a comparative discussion and presents a promising picture of the future scope of the improvements.

Photochemistry Journey to Multielectron and Multiproton Chemical Transformation

The odyssey of photochemistry is accompanied by the journey to manipulate "electrons" and "protons" in time, in space, and in energy. Over the past decades, single-electron (1e^-) photochemical transformations have brought marvelous achievements. However, as each photon absorption typically generates only one exciton pair, it is exponentially challenging to accomplish multielectron and proton photochemical transformations. The multistep differences in thermodynamics and kinetics urgently require us to optimize light harvesting, expedite consecutive electron transfer, manipulate the interaction of catalysts with substrates, and coordinate proton transfer kinetics to furnish selective bond formations. Tandem catalysis enables orchestrating different photochemical events and catalytic transformations from subpicoseconds to seconds, which facilitates multielectron redox chemistries and brings consecutive, value-added reactivities. Joint efforts in molecular and material design, mechanistic understanding, and theoretical modeling will bring multielectron and proton synthetic opportunities for fuels, fertilizers, and chemicals with enhanced versatility, efficiency, selectivity, and scalability, thus taking better advantage of photons (i.e., sunlight) for our sustainable society.

Efficient, Selective CO2 Photoreduction Enabled by Facet-Resolved Redox-Active Sites on Colloidal CdS Nanosheets

Advances in nanotechnology have enabled precise design of catalytic sites for CO₂ photoreduction, pushing product selectivity to near unity. However, activity of most nanostructured photocatalysts remains underwhelming due to fast recombination of photogenerated electron-hole pairs and sluggish hole transfer. To address these issues, we construct colloidal CdS nanosheets (NSs) with the large basal planes terminated by S^2- atomic layers as intrinsic photocatalysts (CdS-S^2- NSs). Experimental investigation reveals that the S^2- termination endows ultrathin CdS-S^2- NSs with facet-resolved redox-catalytic sites: oxidation occurs on S^2--terminated large basal facets and reduction happens on side facets. Such an allocation of redox sites not only promotes spatial separation of photoinduced electrons and holes but also facilitates balanced extraction of holes and electrons by shortening the hole diffusion distance along the (001) direction of the ultrathin NSs. Consequently, the CdS-S^2- NSs exhibit superb performance for photocatalytic CO₂-to-CO conversion, which was verified by the isotope-labeled experiments to be a record-breaking performance: a CO selectivity of 99%, a CO formation rate of 2.13 mol g^-1 h^-1, and an effective apparent quantum efficiency of 42.1% under the irradiation (340 to 450 nm) of a solar simulator (AM 1.5G). The breakthrough performance achieved in this work provides novel insights into the precise design of nanostructures for selective and efficient CO₂ photoreduction.

Reductive Carbon-Carbon Coupling on Metal Sites Regulates Photocatalytic CO2 Reduction in Water Using ZnSe Quantum Dots

Colloidal quantum dots (QDs) consisting of precious-metal-free elements show attractive potentials towards solar-driven CO₂ reduction. However, the inhibition of hydrogen (H₂ ) production in aqueous solution remains a challenge. Here, we describe the first example of a carbon-carbon (C-C) coupling reaction to block the competing H₂ evolution in photocatalytic CO₂ reduction in water. In a specific system taking ZnSe QDs as photocatalysts, the introduction of furfural can significantly suppress H₂ evolution leading to CO evolution with a rate of ≈5.3 mmol g^-1  h^-1 and a turnover number (TON) of >7500 under 24 h visible light. Meanwhile, furfural is upgraded to the self-coupling product with a yield of 99.8 % based on the consumption of furfural. Mechanistic insights show that the reductive furfural coupling reaction occurs on surface Zn-sites to consume electrons and protons originally used for H₂ production, while the CO formation pathway at surface anion vacancies from CO₂ remains.

Photocatalytic CO2 conversion: from C1 products to multi-carbon oxygenates

Photocatalytic CO₂ conversion into high-value chemicals has been emerging as an attractive research direction in achieving carbon resource sustainability. The chemical products can be categorized into C1 and multi-carbon (C₂₊) products. In this review, we describe the recent research progress in photocatalytic CO₂ conversion systems from C1 products to multi-carbon oxygenates, and analyze the reasons related to their catalytic mechanisms, as the production of multi-carbon oxygenates is generally more difficult than that of C1 products. Then we discuss several examples in promoting the photoconversion of CO₂ to value-added multi-carbon products in the aspects of photocatalyst design, mass transfer control, determination of active sites, and intermediate regulation. Finally, we summarize perspectives on the challenges and propose potential directions in this fast-developing field, such as the prospect of CO₂ transformation to long-chain hydrocarbons like salicylic acid or even plastics.

Photocatalytic Anaerobic Dehydrogenation of Alcohols over Metal Halide Perovskites: A New Acid-Free Scheme for H2 Production

Photocatalytic H₂ evolution from haloid acid (HX) solution by metal halide perovskites (MHPs) has been intensively investigated; however, the corrosive acid solution severely restricts its practical operability. Therefore, developing acid-free schemes for H₂ evolution using MHPs is highly desired. Here, we investigate the photocatalytic anaerobic dehydrogenation of alcohols over a series of MHPs (APbX₃, A = Cs⁺, CH₃NH₃⁺ (MA), CH(NH₂)₂⁺ (FA); X = Cl^-, Br^-, I^-) to simultaneously produce H₂ and aldehydes. Via the coassembly of Pt and rGO nanosheets on MAPbBr₃ microcrystals, the optimal MAPbBr₃/rGO-Pt reaches a H₂ evolution rate of 3150 μmol g^-1 h^-1 under visible light irradiation (780 nm ≥ λ ≥ 400 nm), which is more than 105-fold higher than pure MAPbBr₃ (30 μmol g^-1 h^-1). The present work not only brings new ample opportunities toward photocatalytic H₂ evolution but also opens up new avenues for more effective utilization of MHPs in photocatalysis.

Engineering the Interfacial Microenvironment via Surface Hydroxylation to Realize the Global Optimization of Electrochemical CO2 Reduction

The adsorption and activation of CO₂ on the electrode interface is a prerequisite and key step for electrocatalytic CO₂ reduction reaction (eCO₂ RR). Regulating the interfacial microenvironment to promote the adsorption and activation of CO₂ is thus of great significance to optimize overall conversion efficiency. Herein, a CO₂-philic hydroxyl coordinated ZnO (ZnO-OH) catalyst is fabricated, for the first time, via a facile MOF-assisted method. In comparison to the commercial ZnO, the as-prepared ZnO-OH exhibits much higher selectivity toward CO at lower applied potential, reaching a Faradaic efficiency of 85% at -0.95 V versus RHE. To the best of our knowledge, such selectivity is one of the best records in ZnO-based catalysts reported till date. Density functional theory calculations reveal that the coordinated surficial -OH groups are not only favorable to interact with CO₂ molecules but also function in synergy to decrease the energy barrier of the rate-determining step and maintain a higher charge density of potential active sites as well as inhibit undesired hydrogen evolution reaction. Our results indicate that engineering the interfacial microenvironment through the introduction of CO₂-philic groups is a promising way to achieve the global optimization of eCO₂ RR via promoting adsorption and activation of CO₂.

Assembling CdSe Quantum Dots into Polymeric Micelles Formed by a Polyethylenimine-Based Amphiphilic Polymer to Enhance Efficiency and Selectivity of CO2-to-CO Photoreduction in Water

Colloidal quantum dots (QDs) as photocatalysts enable catalysis of CO₂-to-CO conversion in the presence of electron donors. The surface and/or interfacial chemical environment of the QDs is essential for the activity and selectivity of the CO₂ photoreduction. Various strategies, including exposing active metal sites or anchoring functional organic ligands, have been applied to tune the QDs' surface chemical environment and thus to improve both activity and selectivity of CO₂ photoreduction, which occurs at surface of the QDs. However, the efficient and selective photocatalytic CO₂ reduction with QD photocatalysts in water is still a challenging task due to low CO₂ solubility and robust competing reaction of proton reduction in water. Different from state-of-the-art QDs' surface manipulation, we proposed to ameliorate the interfacial chemical environment of CdSe QDs via assembling the QDs into functional polymeric micelles in water. Herein, CdSe@PEI-LA assemblies were constructed by loading CdSe QDs into polymeric micelles formed by PEI-LA, a polyethylenimine (PEI)-based functional amphiphilic polymer. Due to self-assembly and high CO₂ adsorption capacity of PEI-LA in water, the photocatalytic CO₂-to-CO conversion efficiency and selectivity of the CdSe@PEI-LA assemblies in water were dramatically improved to 28.0 mmol g^-1 and 87.5%, respectively. These two values increased 57 times and 1.5 times, respectively, compared with those of the pristine CdSe QDs. Mechanism studies revealed that CdSe QDs locate in polymeric micelles of high CO₂ local concentration and the photoinduced electron transfer from the conduction band of CdSe QDs to Cd-CO₂* species is thermodynamically and kinetically improved in the presence of PEI-LA. The CdSe@PEI-LA system represents a successful example of using a functionalized amphiphilic polymer to ameliorate interfacial microenvironments of nanocrystal photocatalysts and realizing efficient and selective CO₂ photoreduction in water.

Ultrathin Two-Dimensional ZnIn2S4/Nix-B Heterostructure for High-Performance Photocatalytic Fine Chemical Synthesis and H2 Generation

Photocatalytic H₂ evolution coupled with organic transformation provides a new avenue to cooperatively produce clean fuels and fine chemicals, enabling a more efficient conversion of solar energy. Here, a novel two-dimensional (2D) heterostructure of ultrathin ZnIn₂S₄ nanosheets decorated with amorphous nickel boride (Ni_x-B) is prepared for simultaneous photocatalytic anaerobic H₂ generation and aromatic aldehydes production. This ZnIn₂S₄/Ni_x-B catalyst elaborately combines the ultrathin structure advantage of the ZnIn₂S₄ semiconductor and the cocatalytic function of Ni_x-B. A high H₂ production rate of 8.9 mmol h^-1 g^-1 is delivered over the optimal ZnIn₂S₄/Ni_x-B with a stoichiometric production of benzaldehyde, which is about 22 times higher than ZnIn₂S₄. Especially, the H₂ evolution rate is much higher than the value (2.8 mmol h^-1 g^-1) of the traditional photocatalytic half reaction of H₂ production with triethanolamine as a sacrificial agent. The apparent quantum yield reaches 24% at 420 nm, representing an advanced photocatalyst system. Moreover, compared with traditional sulfide, hydroxide, and even noble metal modified ZnIn₂S₄/M counterparts (M = NiS, Ni(OH)₂, Pt), the ZnIn₂S₄/Ni_x-B also maintains markedly higher photocatalytic activity, showing a highly efficient and economical advantage of the Ni_x-B cocatalyst. This work sheds light on the exploration of 2D ultrathin semiconductors decorated with novel transition metal boride cocatalyst for efficient photocatalytic organic transformation integrated with solar fuel production.

Tandem utilization of CO2 photoreduction products for the carbonylation of aryl iodides

Photocatalytic CO₂ reduction reaction has been developed as an effective strategy to convert CO₂ into reusable chemicals. However, the reduction products of this reaction are often of low utilization value. Herein, we effectively connect photocatalytic CO₂ reduction and amino carbonylation reactions in series to reconvert inexpensive photoreduction product CO into value-added and easily isolated fine chemicals. In this tandem transformation system, we synthesize an efficient photocatalyst, NNU-55-Ni, which is transformed into nanosheets (NNU-55-Ni-NS) in situ to improve the photocatalytic CO₂-to-CO activity significantly. After that, CO serving as reactant is further reconverted into organic molecules through the coupled carbonylation reactions. Especially in the carbonylation reaction of diethyltoluamide synthesis, CO conversion reaches up to 85%. Meanwhile, this tandem transformation also provides a simple and low-cost method for the ¹³C isotopically labeled organic molecules. This work represents an important and feasible pathway for the subsequent separation and application of CO₂ photoreduction product.

Interfacial Nucleation Mechanism of Water-Soluble Ag-In-S Quantum Dots at Room Temperature and Their Visible Light Catalytic Performance

A novel interfacial reaction nucleation mechanism for the preparation of water-soluble Ag-In-S quantum dots (AIS QDs) was proposed in which interfacial acid regulates the concentration of hydroxide ions outside the complex and sulfur sources attack cations at the interface of the complex, covalent bonds between cations and sulfur sources are formed at the interface of the complex, and the nucleation and growth of crystals is finished at room temperature. By bypassing the heating process normally necessary for crystal nucleation and growth, AIS QDs can be produced on a large scale under simple, mild conditions. At the same time, the characteristics of this mechanism enable AIS QDs to be directly synthesized in an organic pollutant solution. This study represents a significant advance in the mechanism of crystal synthesis and contributes to the photocatalytic decomposition of organic pollutants from theory to practice.

Ultrathin Nanosheet Assembled Multishelled Superstructures for Photocatalytic CO2 Reduction

Solar-driven conversion of CO₂ is considered an efficient way to tackle the energy and environmental crisis. However, the photocatalytic performance is severely restricted due to the insufficient accessible active sites and inhibited electron transfer efficiency. This work demonstrates a general in situ topological transformation strategy for the integration of uniform Co-based species to fabricate a series of multishelled superstructures (MSSs) for CO₂ photocatalytic conversion. Thorough characterizations reveal the obtained MSSs feature ultrathin Co-based nanosheet assembled polyhedral structures with tunable shell numbers, inner cavity sizes, and compositions. The superstructures increase the spatial density of Co-based active sites while maintaining their high accessibility. Further, the ultrathin nanosheets also facilitate the transfer of photogenerated electrons. As a result, the ZnCo bimetallic hydroxide featuring an ultrathin nanosheet assembled quadruple-shell hollow structure (ZnCo-OH QUNH) exhibits high photocatalytic efficiency toward CO₂ reduction with a CO evolution rate of 134.2 μmol h^-1 and an apparent quantum yield of 6.76% at 450 nm. The quasi in situ spectra and theoretical calculations disclose that Co sites in ZnCo-OH QUNH act as highly active centers to stabilize the COOH* intermediate, while Zn species play the role of adsorption sites for the [Ru(bpy)₃]²⁺ molecules.

Defective Ultrathin ZnIn2 S4 for Photoreductive Deuteration of Carbonyls Using D2 O as the Deuterium Source

Deuterium (D) labeling is of great value in organic synthesis, pharmaceutical industry, and materials science. However, the state-of-the-art deuteration methods generally require noble metal catalysts, expensive deuterium sources, or harsh reaction conditions. Herein, noble metal-free and ultrathin ZnIn2 S4 (ZIS) is reported as an effective photocatalyst for visible light-driven reductive deuteration of carbonyls to produce deuterated alcohols using heavy water (D2 O) as the sole deuterium source. Defective two-dimensional ZIS nanosheets (D-ZIS) are prepared in a surfactant assisted bottom-up route exhibited much enhanced performance than the pristine ZIS counterpart. A systematic study is carried out to elucidate the contributing factors and it is found that the in situ surfactant modification enabled D-ZIS to expose more defect sites for charge carrier separation and active D-species generation, as well as high specific surface area, all of which are beneficial for the desirable deuteration reaction. This work highlights the great potential in developing low-cost semiconductor-based photocatalysts for organic deuteration in D2 O, circumventing expensive deuterium reagents and harsh conditions.

Tuning the local chemical environment of ZnSe quantum dots with dithiols towards photocatalytic CO2 reduction

Sunlight-driven CO₂ reduction to renewable fuels is a promising strategy towards a closed carbon cycle in a circular economy. For that purpose, colloidal quantum dots (QDs) have emerged as a versatile light absorber platform that offers many possibilities for surface modification strategies. Considerable attention has been focused on tailoring the local chemical environment of the catalytic site for CO₂ reduction with chemical functionalities ranging from amino acids to amines, imidazolium, pyridines, and others. Here we show that dithiols, a class of organic compounds previously unexplored in the context of CO₂ reduction, can enhance photocatalytic CO₂ reduction on ZnSe QDs. A short dithiol (1,2-ethanedithiol) activates the QD surface for CO₂ reduction accompanied by a suppression of the competing H₂ evolution reaction. In contrast, in the presence of an immobilized Ni(cyclam) co-catalyst, a longer dithiol (1,6-hexanedithiol) accelerates CO₂ reduction. ¹H-NMR spectroscopy studies of the dithiol-QD surface interactions reveal a strong affinity of the dithiols for the QD surface accompanied by a solvation sphere governed by hydrophobic interactions. Control experiments with a series of dithiol analogues (monothiol, mercaptoalcohol) render the hydrophobic chemical environment unlikely as the sole contribution of the enhancement of CO₂ reduction. Density functional theory (DFT) calculations provide a framework to rationalize the observed dithiol length dependent activity through the analysis of the non-covalent interactions between the dangling thiol moiety and the CO₂ reduction intermediates at the catalytic site. This work therefore introduces dithiol capping ligands as a straightforward means to enhance CO₂ reduction catalysis on both bare and co-catalyst modified QDs by engineering the particle's chemical environment.

ZnSe quantum dots (yellow sphere) are modified with dithiols of various lengths for enhanced visible light-driven CO₂ to CO reduction in either the absence or presence of a molecular Ni co-catalyst.

Rational Design of Dot-on-Rod Nano-Heterostructure for Photocatalytic CO2 Reduction: Pivotal Role of Hole Transfer and Utilization

Inspired by green plants, artificial photosynthesis has become one of the most attractive approaches toward carbon dioxide (CO₂ ) valorization. Semiconductor quantum dots (QDs) or dot-in-rod (DIR) nano-heterostructures have gained substantial research interest in multielectron photoredox reactions. However, fast electron-hole recombination or sluggish hole transfer and utilization remains unsatisfactory for their potential applications. Here, the first application of a well-designed ZnSe/CdS dot-on-rods (DORs) nano-heterostructure for efficient and selective CO₂ photoreduction with H₂ O as an electron donor is presented. In-depth spectroscopic studies reveal that surface-anchored ZnSe QDs not only assist ultrafast (≈2 ps) electron and hole separation, but also promote interfacial hole transfer participating in oxidative half-reactions. Surface photovoltage (SPV) spectroscopy provides a direct image of spatially separated electrons in CdS and holes in ZnSe. Therefore, ZnSe/CdS DORs photocatalyze CO₂ to CO with a rate of ≈11.3 µmol g^-1 h^-1 and ≥85% selectivity, much higher than that of ZnSe/CdS DIRs or pristine CdS nanorods under identical conditions. Obviously, favored energy-level alignment and unique morphology balance the utilization of electrons and holes in this nano-heterostructure, thus enhancing the performance of artificial photosynthetic solar-to-chemical conversion.

Desalination and Detoxification of Textile Wastewater by Novel Photocatalytic Electrolysis Membrane Reactor for Ecosafe Hydroponic Farming

In this study, a novel photoelectrocatalytic membrane (PECM) reactor was tested as an option for the desalination, disinfection, and detoxification of biologically treated textile wastewater (BTTWW), with the aim to reuse it in hydroponic farming. The anionic ion exchange (IEX) process was used before PECM treatment to remove toxic residual dyes. The toxicity evaluation for every effluent was carried out using the Vibrio fischeri, Microtox^® test protocol. The disinfection effect of the PECM reactor was studied against E. coli. After PECM treatment, the 78.7% toxicity level of the BTTWW was reduced to 14.6%. However, photocatalytic desalination during treatment was found to be slow (2.5 mg L^-1 min^-1 at 1 V potential). The reactor demonstrated approximately 52% COD and 63% TOC removal efficiency. The effects of wastewater reuse on hydroponic production were comparatively investigated by following the growth of the lettuce plant. A detrimental effect was observed on the lettuce plant by the reuse of BTTWW, while no negative impact was reported using the PECM treated textile wastewater. In addition, all macro/micronutrient elements in the PECM treated textile wastewater were recovered by hydroponic farming, and the PECM treatment may be an eco-safe wastewater reuse method for crop irrigation.

Green Carbon Science: Efficient Carbon Resource Processing, Utilization, and Recycling Towards Carbon Neutrality

Green carbon science is defined as "Study and optimization of the transformation of carbon containing compounds and the relevant processes involved in the entire carbon cycle from carbon resource processing, carbon energy utilization, and carbon recycling to use carbon resources efficiently and minimize the net CO2 emission." [1] Green carbon science is related closely to carbon neutrality, and the relevant fields have developed quickly in the last decade. In this Minireview, we proposed the concept of carbon energy index, and the recent progresses in petroleum refining, production of liquid fuels, chemicals, and materials using coal, methane, CO2, biomass, and waste plastics are highlighted in combination with green carbon science, and an outlook for these important fields is provided in the final section.

Construction of Low-Cost Z-Scheme Heterostructure Cu2 O/PCN for Highly Selective CO2 Photoreduction to Methanol with Water Oxidation

Solar-driven CO₂ reaction with water oxidation into alcohols represents a promising approach to achieve real artificial photosynthesis. However, rapid recombination of photogenerated carriers seriously restricts the development of artificial photosynthesis. Herein, a facile method is explored to construct low-cost Z-Scheme heterostructure Cu₂ O/polymeric carbon nitride (PCN) by in situ growth of Cu₂ O hollow nanocrystal on PCN. The protective PCN layer and Z-schematic charge flow can make robust Cu₂ O/PCN photocatalysts, and the spatial separation of electrons and holes with high redox potentials of E_CB (-1.15 eV) and E_VB (1.65 eV) versus NHE can efficiently drive CO₂ photoreduction to methanol in pure water, which is further confirmed by DFT calculation. The Z-scheme heterostructure Cu₂ O/PCN exhibits a high methanol yield of 276 µmol g^-1 in 8 h with ca. 100% selectivity, much superior to that of isolated Cu₂ O and PCN, and all the reported Cu₂ O-based heterostructures. This work provides a unique strategy to efficiently and selectively promote the conversion of CO₂ and H₂ O into high-value chemicals by constructing a low-cost Z-scheme heterostructure.

Ordered Macroporous Carbonous Frameworks Implanted with CdS Quantum Dots for Efficient Photocatalytic CO2 Reduction

Solar-driven photocatalytic CO₂ reduction is regarded as a promising way to simultaneously mitigate the energy crisis and CO₂ pollution. However, achieving high efficiency of photocatalytic CO₂ reduction, especially without the assistance of sacrifice reagents or extra alkaline additives, remains a critical issue. Herein, a photocatalyst of 3D ordered macroporous N-doped carbon (NC) supported CdS quantum dots (3DOM CdSQD/NC) is successfully fabricated toward photocatalytic CO₂ reduction via an in situ transformation strategy. Additionally, an amines oxidation reaction is introduced to replace the H₂ O oxidation process to further boost the photocatalytic CO₂ reduction efficiency. Impressively, 3DOM CdSQD/NC exhibits superior activity and selectivity in photocatalytic CO₂ reduction coupled with amines oxidation, affording a CO production rate as high as 5210 µmol g^-1 h^-1 in the absence of any sacrificial agents and alkaline additives. Moreover, 3DOM CdSQD/NC achieves an apparent quantum efficiency of 2.9% at 450 nm. Mechanism studies indicate that the 3D ordered macropores in the NC matrix are beneficial to the transfer of photogenerated carriers. Furthermore, the highly dispersed CdS QDs on the NC skeleton are able to significantly promote the adsorption of both CO₂ and amine molecules and depress the CO₂ activation energy barriers by stabilizing the *COOH intermediate, directly contributing to the high activity.

Boosting CO2 Electroreduction over a Cadmium Single-Atom Catalyst by Tuning of the Axial Coordination Structure

Guided by first-principles calculations, it was found that Cd single-atom catalysts (SACs) have excellent performance in activating CO₂ , and the introduction of axial coordination structure to Cd SACs cannot only further decrease the free energy barrier of CO₂ reduction, but also suppress the hydrogen evolution reaction (HER). Based on the above discovery, we designed and synthesized a novel Cd SAC that comprises an optimized CdN₄ S₁ moiety incorporated in a carbon matrix. It was shown that the catalyst exhibited outstanding performance in CO₂ electroreduction to CO. The faradaic efficiency (FE) of CO could reach up to 99.7 % with a current density of 182.2 mA cm^-2 in a H-type electrolysis cell, and the turnover frequency (TOF) value could achieve 73000 h^-1 , which was much higher than that reported to date. This work shows a successful example of how to design highly efficient catalysts guided by theoretical calculations.