Preparation and characterization of modified halloysite nanotubes—Pebax nanocomposite membranes for CO2/CH4 separation

Preparation of pyrolytic coke/uio-66 composite and its effectiveness for removing mono-ethylene glycol (MEG) from aqueous environments

In the present study, the potential of pyrolytic coke (PC) and PC modified with UiO-66 nanoparticles as adsorbents for removing mono-ethylene glycol (MEG) from aqueous solutions was studied. Different experimental techniques were used to investigate the properties of adsorbents. The modification of the PC surface (6.91 m2/g) with UiO-66 significantly enhanced the specific surface area of the PC/UiO-66 composites, increasing it to 379.31 m2/g. Maximum MEG adsorption using PC (84.21%) and PC/UiO-66 (96.75%) was recorded at pH equal to 5 and 7, MEG quantity of 100 mg/L, temperature of 25 °C, adsorbent dosage of 1 g/L, and treatment time of 120 min, respectively. The Langmuir isotherm adsorption capacities for MEG removal using PC and PC/UiO-66 were determined to be 265 mg/g and 291 mg/g, respectively. The KF and AT values for the MEG adsorption were obtained at 128.1 mg/g (L/mg)1/n and 11.05 L/g, indicating the more pronounced affinity of the PC/UiO-66 towards MEG than the PC sample. The enthalpy, entropy, and Gibbs free energy were determined to be negative; thus, the MEG adsorption was exothermic and spontaneous in the range of 25-50 °C. The results demonstrated that the experimental data adheres to a pseudo-first-order kinetic. The adsorbents were recycled up to five stages, and the results showed that after five cycles, no significant decrease in the adsorption efficiency occurred, making them suitable for repeated utilization in the adsorption process.

Enhancement strategies of poly(ether-block-amide) copolymer membranes for CO2 separation: A review

Poly(ether-block-amide) (Pebax) membranes have become the preferred CO2 separation membrane because of their excellent CO2 affinity and robust mechanical resistance. Nevertheless, their development must be considered to overcome the typical obstacles in polymeric membranes, including the perm-selectivity trade-off, plasticization, and physical aging. This article discusses the recent enhancement strategies as a guideline for designing and developing Pebax membranes. Five strategies were developed in the past few years to improve Pebax gas transport properties, including crosslinking, mobile carrier attachment, polymer blending, filler incorporation, and the hybrid technique. Among them, filler incorporation and the hybrid technique were most favorable for boosting CO2/N2 and CO2/CH4 separation performance with a trade-off-free profile. On the other hand, modified Pebax membranes must deal with two latent issues, mechanical strength loss, and perm-selectivity off-balance. Therefore, exploring novel materials with unique structures and surface properties will be promising for further research. In addition, seeking eco-friendly additives has become worthwhile for establishing Pebax membrane sustainable development for gas separation.