High-performance liquid chromatography with electrochemical detection for analysis of gliclazide in plasma

Simultaneous HPLC Assay of Gliclazide and Ciprofloxacin in Plasma and its Implementation for Pharmacokinetic Study in Rats

A simple and reliable high-performance liquid chromatography method for simultaneous quantitation of gliclazide and ciprofloxacin in plasma sample has been developed and validated. This method implements protein precipitation, a simple and practical pretreatment method by the addition of acetonitrile that gives a clean supernatant. The separation was carried out in a system consisted of a C18 column with acetonitrile and KH2PO4 (0.01 M, 0.1% v/v of triethylamine, pH 2.7) as the mobile phase in a gradient elution at a total flow-rate of 1 mL/min. Gliclazide and ciprofloxacin were quantitated using an ultraviolet detector set at wavelengths of 229 and 277 nm, respectively, which ensures optimal sensitivity for both compounds. This method possesses an excellent linearity at concentration ranges of 0.5-50 mg/L for gliclazide and 0.1-10 mg/L for ciprofloxacin. High within- and between-run accuracy for both gliclazide (% error of -8.00 to 0.45%) and ciprofloxacin (% error of -10.00 to 7.63%) were demonstrated. The intra- and inter-day precision (expressed as %CV) was <8 and 12% for gliclazide and ciprofloxacin, respectively. Both analytes were stable during storage and sample processing. The method reported in this study can be implemented for pharmacokinetic interaction study in rats.

Quality by Design (Qbd) Approach to Develop HPLC Method for Estimation of Gliclazide and its Impurity (Gliclazide Impurity A) in Bulk Drug

Background:

Gliclazide Impurity A (GI-A) is one of the gliclazide impurities, as described in the European Pharmacopoeia.

Objective:

The objective of this study was to develop and validate simple, robust and accurate Reverse- Phase High-Performance Liquid Chromatography (RP-HPLC) method for estimation of gliclazide along with GI-A in bulk by optimising chromatographic parameters using Box Behnken design in response surface methodology.

Methods & Results:

Box Behnken design was employed for optimizing flow rate, injection volume and strength of the buffer in order to minimize retention time of both gliclazide and GI-A. The optimized strength of orthophosphoric acid buffer in a mixture of Acetonitrile (50:50 v/v), flow rate and injection volume were found to be 25mM, 1mL/min, 20 µL respectively. Linearity was observed in concentration range of 25-150 µg/mL (r2=0.999). The retention time of gliclazide and GI-A was found to be 5.799 minutes and 3.819 minutes, respectively. The limit of detection for Gliclazide and GI-A was found to be 0.0066, and 0.0075 µg/mL and the limit of quantification limit was found to be 0.0202, 0.0228 µg/mL, respectively. The developed method was validated as per the ICH guidelines.

Conclusion:

The proposed method is useful for best analysis of Gliclazide and GI-A in pharmaceutical dosage forms. QbD approach was found to be an effective tool for optimising chromatographic conditions of the proposed method.

Gliclazide

Gliclazide is a second-generation oral hypoglycemic drug used for the treatment of noninsulin-dependent diabetes mellitus. It belongs to the sulfonylurea class that stimulates insulin secretion from pancreatic β-cells by inhibiting ATP-dependent potassium channels. Gliclazide also possesses unique antioxidant properties and other beneficial hemobiological effects. This profile represents a comprehensive description of the physical properties, chemical synthesis, spectroscopic characterization (FTIR, ¹H NMR, ¹³C NMR, UV, and single-crystal X-ray), methods of analysis, pharmacological actions, and pharmacokinetic and pharmacodynamic properties of the title drug.

Development and validation of LC/MS/MS method for the simultaneous determination of montelukast, gliclazide, and nifedipine and its application to a pharmacokinetic study

Background

Montelukast is a leukotriene receptor antagonist for treatment of asthma, gliclazide is an oral hypoglycemic antidiabetic agent, and nifedipine is a calcium channel blocker used for treatment of angina pectoris and hypertension. These drugs may be prescribed to patients suffering from these chronic diseases. A survey of the literature reveals that there is no reported method for the simultaneous determination of montelukast, gliclazide, and nifedipine in pharmaceutical preparations or biological fluids.

Results

A simple, sensitive, and rapid method for the simultaneous quantification of montelukast, gliclazide, and nifedipine in human plasma was developed and validated. Montelukast, gliclazide, and nifedipine were resolved using rapid resolution LC/MS/MS Agilent system and SB-C₁₈ (50 × 4.6 mm) 1.8 μm particle size column. The mobile phase consisted of acetonitrile: 0.1% formic acid (84:16). The three drugs were simultaneously extracted from plasma by protein precipitation with acetonitrile using zaferolukast as an internal standard. The method was validated according to FDA guidelines with good reproducibility and linearity of 0.999 and the limits of quantification were 0.11, 0.04, and 0.07 ng/mL for montelukast, gliclazide, and nifedipine, respectively. The accuracies of the three QCs for the three drugs were 99.48% (montelukast), 106.53% (gliclazide), and 108.03% (nifedipine) in human plasma. The validated method was applied to a pharmacokinetic study in human volunteers after oral administration of the three drugs. The applied LC/MS/MS method was shown to be sufficiently sensitive and suitable for pharmacokinetic studies.

Conclusion

The LC/MS/MS method was validated and successfully applied for the determination of montelukast, gliclazide, and nifedipine concentrations in human plasma.

Supramolecular Interaction of Gliclazide with Cucurbit[7]uril and its Analytical Application

Gliclazide (GLZ) is non-fluorescent in aqueous solution. This property makes its determination through direct fluorescent methods impossible. Palmatine (PAL) exhibits very weak fluorescence emissions in aqueous solution. However, in acidic media at room temperature, PAL can react with cucurbit[7]uril (CB[7]) to form a stable complex and the fluorescence intensity of the complex is greatly enhanced. Dramatic quenching of the fluorescence intensity of the CB[7]–PAL complex was observed with the addition of GLZ. The competing reactions and the supramolecular interaction mechanisms between GLZ and PAL as they fight for occupancy of the CB[7] cavity were studied using spectrofluorimetry, 1H NMR spectroscopy, and molecular modelling calculations. The association constants of the complexes formed between the host and the guest were determined. Based on the significant quenching of the supramolecular complex fluorescence intensity, a fluorescent probe method of high sensitivity was developed to determine GLZ in its pharmaceutical dosage forms and in human plasma with good precision and accuracy. The linear range of the method was from 0.003 to 2.100 μg mL–1. The limit of detection was 0.001 μg mL–1. This shows that the proposed method has promising potential for therapeutic monitoring and pharmacokinetics and for clinical application.

Gliclazide microcrystals prepared by two methods of in situ micronization: pharmacokinetic studies in diabetic and normal rats

The low water-solubility of gliclazide (GL) leads to a low dissolution rate and variable bioavailability. The aim of this study was to investigate the effect of micronization on the absorption and pharmacokinetics of GL after oral administration in rats. GL microcrystals were prepared using solvent-change and pH-shift methods. Scanning electron microscopy showed considerable changes in the shape and size of crystals using both methods. In the optimized formulation of each method, the particle size of treated GL was reduced about 30 (from 290 to 9.9 microm) and 61 times (to 4.76 microm) by solvent-change and pH-shift methods, respectively. Recrystallized samples showed faster dissolution rate than untreated GL particles. Glucose-lowering effect, C(max), and area under the drug concentration-time profile (area under the curve (AUC)) were compared in diabetic and normal rats. AUC and C(max) were increased by microcrystals in both groups of animals. Administration of 40 mg/kg of GL in the form of untreated drug and microcrystals obtained by solvent-change and pH-shift methods caused 12.49% and 21.04% enhancement in glucose-lowering effect of GL in diabetic rats, respectively.

Trace analysis of glyclazide in human plasma at microscale level by mass spectrometry

Green (reagents and organic solvents saving) analytical chemistry is a new strategy for pharmaceutical analysis. The principles of this idea include primary elimination or at least reduction of the amounts of organic reagents and solvents. In this study, we have provided two simple methods for the analysis of clinical drugs in human plasma. One is the capillary LC (Cap LC) connected to MS-MS, the other is the matrix-assisted laser desorption ionization (MALDI) connected to TOF MS. Sulfonylurea drugs are usually used in diabetes mellitus patients. Diabetes is a syndrome of disordered metabolism resulting in abnormally high blood sugar levels (hyperglycemia). These microscale methods were successfully applied for the monitoring of drug levels in human plasma using gliclazide (a second-generation sulfonylurea) as the test platform. The sensitivity of these methods is sufficient for detecting the gliclazide within a therapeutic range. All the analytical procedures (including human plasma, sample preparation, and flow rate of the analytical system) were at microscale level. These two methods would lower the consumption of organic solvents further safeguarding our environment.

Application of monolithic column in quantification of gliclazide in human plasma by liquid chromatography

A simple, rapid and sensitive isocratic reversed phase HPLC method with UV detection using a monolithic column has been developed and validated for the determination of gliclazide in human plasma. The assay enables the measurement of gliclazide for therapeutic drug monitoring with a minimum quantification limit of 10ngml(-1). The method involves simple, one-step extraction procedure and analytical recovery was complete. The separation was carried out in reversed-phase conditions using a Chromolith Performance (RP-18e, 100mmx4.6mm) column with an isocratic mobile phase consisting of 0.01M disodium hydrogen phosphate buffer-acetonitrile (52:48, v/v) adjusted to pH 4.0. The wavelength was set at 230nm. The calibration curve was linear over the concentration range 10-5000ngml(-1). The coefficients of variation for inter-day and intra-day assay were found to be less than 6.0%.