Selective and sensitive trace analysis of sulfur mustard with thermal desorption and two-dimensional gas chromatography–mass spectrometry

Improving Quantification of tabun, sarin, soman, cyclosarin, and sulfur mustard by focusing agents: A field portable gas chromatography-mass spectrometry study

Commercial gas chromatograph-mass spectrometers, one of which being Inficon's HAPSITE® ER, have demonstrated chemical detection and identification of nerve agents (G-series) and blistering agents (mustard gas) in the field; however most analyses relies on self-contained or external calibration that inherently drifts over time. We describe an analytical approach that uses target-based thermal desorption standards, called focusing agents, to accurately calculate concentrations of chemical warfare agents that are analyzed by gas chromatograph-mass spectrometry. Here, we provide relative response factors of focusing agents (2-chloroethyl ethyl sulfide, diisopropyl fluorophosphate, diethyl methylphosphonate, diethyl malonate, methyl salicylate, and dichlorvos) that are used to quantify concentrations of tabun, sarin, soman, cyclosarin and sulfur mustard loaded on thermal desorption tubes (Tenax® TA). Aging effects of focusing agents are evaluated by monitoring deviations in quantification as thermal desorption tubes age in storage at room temperature and relative humidity. The addition of focusing agents improves the quantification of tabun, sarin, soman, cyclosarin and sulfur mustard that is analyzed within the same day as well as a 14-day period. Among the six focusing agents studied here, diisopropyl fluorophosphate has the best performance for nerve agents (G-series) and blistering agents (mustard gas) compared to other focusing agents in this work and is recommended for field use for quantification. The use of focusing agent in the field leads to more accurate and reliable quantification of Tabun (GA), Sarin (GB), Soman (GD), Cyclosarin (GF) and Sulfur Mustard (HD) than the traditional internal standard. Future improvements on the detection of chemical, biological, radiological, nuclear, and explosive materials (CBRNE) can be safely demonstrated with standards calibrated for harmful agents.

Development of a Series of Fluorescent Probes for the Early Diagnostic Imaging of Sulfur Mustard Poisoning

Sulfur mustard is one of the most harmful chemical warfare agents and can induce skin, eye, and lung injuries. However, it is hard for medical stuff to diagnose sulfur mustard poisoning early because of the incubation period after sulfur mustard exposure. Detecting intact sulfur mustard in vivo might be an effective approach for the early diagnosis of sulfur mustard poisoning. A series of fluorescent probes for intact sulfur mustard detection were developed in this study. All of the developed probes could react with sulfur mustard selectivity. Among these probes, SiNIR-SM exhibited an extremely good response rate and a high off/on contrast. To the best of our knowledge, SiNIR-SM is the first near-infrared fluorescent probe for the sulfur mustard detection. Both SiNIR-SM and OxSM-1 were successfully applied to image sulfur mustard in living cells. Using SiNIR-SM, we found that sulfur mustard accumulates in the mitochondria of living cells. This result could provide a new insight for the treatment of sulfur mustard injuries. We also found that SiNIR-SM is suitable for the early diagnostic imaging of sulfur mustard poisoning in SKH-1 mice via the detection of intact sulfur mustard.

Rapid analysis of sulfur mustard oxide in plasma using gas chromatography-chemical ionization-mass spectrometry for diagnosis of sulfur mustard exposure

Sulfur mustard (SM) is the most utilized chemical warfare agent in modern history and has caused more casualties than all other chemical weapons combined. SM still poses a threat to civilians globally because of existing stockpiles and ease of production. Exposure to SM causes irritation to the eyes and blistering of skin and respiratory tract. These clinical signs of exposure to SM can take 6-24 h to appear. Therefore, analyzing biomarkers of SM from biological specimens collected from suspected victims is necessary for diagnosis during this latent period. Here, we report a rapid, simple, and direct quantitative analytical method for an important and early SM biomarker, sulfur mustard oxide (SMO). The method includes addition of a stable isotope labeled internal standard, SMO extraction directly into dichloromethane (DCM), rapid drying and reconstitution of the extract, and direct analysis of SMO using gas chromatography-chemical ionization-mass spectrometry. The limit of detection of the method was 0.1 μM, with a linear range from 0.5 to 100 μM. Method selectivity, matrix effect, recovery, and short-term stability were also evaluated. Furthermore, the applicability of the method was tested by analyzing samples from inhalation exposure studies performed in swine. The method was able to detect SMO from 100% of the exposed swine (N = 9), with no interferences present in the plasma of the same swine prior to exposure. The method presented here is the first of its kind to allow for easy and rapid diagnosis of SM poisoning (sample analysis <15 min), especially important during the asymptomatic latency period.

Accumulation of intact sulfur mustard in adipose tissue and toxicokinetics by chemical conversion and isotope-dilution liquid chromatography-tandem mass spectrometry

Sulfur mustard (SM) is a powerful vesicant and one of the most harmful chemical warfare agents. Although having been studied for a long time, it is still difficult to fully elucidate the mechanisms of SM poisoning, and there is no effective antidote or specific treatment for SM injury. The investigations on toxicokinetics and tissue distribution of SM will help to understand its toxicity and provide a theoretical basis for pretreatment and therapy of SM poisoning. But the metabolic trajectory or fate of intact SM in vivo remains unclear, and there are insufficient experimental data to elucidate, due to its high reactivity and difficulty in biomedical sample analysis. In this paper, a sensitive method for the detection and quantification of intact SM in blood or tissues using isotope-dilution LC-MS/MS coupled with chemical conversion was developed. By transforming highly reactive SM into stable derivative product, the real concentration of intact SM in biological samples was obtained accurately. The toxicokinetics and tissue distribution studies of intact SM in rats were successfully profiled by the novel method after intravenous (10 mg/kg) or cutaneous administration (1, 3 and 10 mg/kg). The SM level in blood with peak time at 30-60 min determined in cutaneous exposure experiment was found much higher than previously reported, and the mean residence time in blood extended to 1-1.5 h. A significant accumulation of intact SM was observed in adipose tissues, including the perirenal fat, epididymal fat, subcutaneous fat and brown fat, in which the concentrations of SM were at least 15 times greater than those in non-adipose tissues in cutaneous exposed rats. The recovery of SM in body fat was calculated as 3.3 % of bioavailable SM (the bioavailability after cutaneous exposure was evaluated as 16 %). Thus, the adipose tissue was important for SM distribution and toxicity, which may pioneer a new model for both the prevention and treatment of SM exposure.

Recent advances in flow-controlled multidimensional gas chromatography

The continued development of flow-controlled two-dimensional gas chromatography (2-D GC) is reviewed, with a special emphasis on results published from 2001 through 2011. Heart-cutting 2-D GC continues to be used for isolating selected components in complex mixtures. The programmable and highly precise flows and temperatures produced by modern gas chromatographs have made it easier to selectively transfer analytes to the secondary column and to backflush unwanted components from the primary column. Several new Deans switch interfaces for performing heart-cutting 2-D GC have been introduced, with most attention given to devices that integrate the flow connections into a single unit. Heart-cutting 2-D GC has been used to isolate analytes in a wide variety of complex mixtures including fuels, industrial feedstocks, fragrances, and environmental extracts. Valve-based comprehensive 2-D GC (GC×GC) was also actively developed in the past decade. Valve-based modulation is a simple way to generate GC×GC separations without using cryogenic fluids. More than ten new valve-based modulators were introduced. Diaphragm valves fitted with sample loops are the most common low duty cycle modulators, whereas fluidic modulators that employ differential flow conditions are the most common high duty cycle modulators. Applications of valve-based GC×GC include analysis of hydrocarbon mixtures, essential oils, and environmental samples.

A review of methods for the determination of reduced sulfur compounds (RSCs) in air

The importance of reduced sulfur compounds (RSCs) in air is well-known for its significant effect on global atmospheric chemistry and malodor and quality of life. In this review, methodological approaches commonly employed for the analysis of RSCs such as hydrogen sulfide, methane thiol, dimethyl sulfide, carbon disulfide, and dimethyl disulfide in air are described. To this end, we focus on gas chromatography (GC) because it is the most feasible, frequently used, and widely accepted approach for the analysis of RSC in air. The advantages and possible limitations related to sampling and/or preconcentration methods are also discussed. The relative performance of different GC-based detection methodologies is evaluated in terms of basic quality assurance. Some alternative methods (i.e., other than GC) that deal with the determination of RSCs in air matrices are also discussed briefly. Finally, this review addresses the methodological developments of RSC analysis by highlighting current limitations and future developments.

Single-molecule detection of nitrogen mustards by covalent reaction within a protein nanopore

Mustards, including sulfur mustards and nitrogen mustards, form a class of cytotoxic, vesicant chemical warfare agents. Mustards have also been used to treat cancer and played a vital role in the development of chemotherapy. Additionally, because of their destructive properties, ease of synthesis, and the lack of effective antidotes, mustards are unquestionably terrorist threats. Therefore, quick and convenient detection of mustards is a critical issue. In the present study, we achieved detection of various mustards on the basis of their chemical reactivity by using engineered alpha-hemolysin (alphaHL) protein pores as sensor elements. We describe four classes of reactions for detecting mustards. These reactions occur between mustards and thiol groups contributed by cysteine side-chains within the lumen of the alphaHL pore or on an internal molecular adapter. The approach is quick and straightforward. It can confirm the existence of mustards in as little as 10 min at 50 microM or lower.