Analytical and semipreparative enantioseparation of 9-hydroxyrisperidone, the main metabolite of risperidone, using high-performance liquid chromatography and capillary electrophoresis

Application of the "Method Operable Design Region" (MODR) approach for the development of a UHPLC method for the assay and purity determination of risperidone in risperidone drug substance and other formulations

To understand the role of analytics in drug development, regulatory bodies also started using the approach of Quality by Design (QbD) during analytical method developments. The present study deals with the development of the "Method Operable Design Region" for assay and purity determination of risperidone in risperidone drug substance and formulations usingy UHPLC. Five different column chemistries, five different pH buffers, oven temperatures from 25 to 45°C, and different organic modifier composition, column lengths and flow rates were studied and statistically evaluated using Fusion QbD software. The final method parameters were selected by performing multivariable changes in a single run and evaluated using the Monte Carlo simulation approach. The uniqueness of this method is that it is mass compatible, a total of 10 peaks are separated within a short run time of 12.0 min and it uses a "Platforming approach", which means the use of a single method for testing the drug substance, different strengths of a drug product and different formulations. The same method can be also used for the determination of the preservative (benzoic acid) in risperidone 1 mg/ml oral solution. The use of the QbD approach is aligned with the US Pharmacopeia <1220>, BP supplementary chapter 2022 and the International Conference on Harmonization Q14 guidelines for life cycle management of analytical methods.

Field-amplified sample injection in capillary zone electrophoresis for the pharmacokinetic research of trace risperidone and its major metabolite 9-hydroxyrisperidone in beagle dogs

This article describes a method for the simultaneous quantitation of risperidone and its major metabolite, 9-hydroxyrisperidone, in beagle dog plasma by field-amplified sample injection in capillary zone electrophoresis. The separation was carried out at 25°C in a 48 cm × 75 µm fused-silica capillary with an applied voltage of 20 kV using 60 mM NaH₂ PO₄ buffer (pH 3.6). The detection wavelength was 280 nm. Clean-up and preconcentration of plasma samples were conducted by 96-well formatted liquid-liquid extraction. In this study, this stacking technique provided a sensitivity enhancement of approximately 158 to 188 fold compared with the same sample without stacking. The method was suitably validated with respect to stability, specificity, linearity, lower limit of quantitation, accuracy, precision, and extraction recovery. Calibration curves exhibited good linearity (r²  > 0.995) over a wide concentration range of 2.5 to 200 ng/mL for both risperidone and 9-hydroxyrisperidone. The intra- and interday precisions at the three quality control levels were less than 11.40%. The intra- and interday accuracies ranged from 87.90 to 107.17% for risperidone and from 88.43 to 105.92% for 9-hydroxyrisperidone. All validation data were within the required limits. In conclusion, the method developed was successfully applied to pharmacokinetic studies of risperidone and 9-hydroxyrisperidone in beagle dogs.

Forced degradation studies, and effect of surfactants and titanium dioxide on the photostability of paliperidone by HPLC

Forced degradation study of paliperidone under hydrolytic, oxidative, thermal and photolytic stress conditions was conducted using HPLC. The drug was found to be labile under hydrolytic, oxidative and photolytic stress conditions; whereas, it was stable under dry heat stress conditions. Effect of anionic, cationic and non-ionic surfactants applied to the concentration exceeding critical micellar concentration on the photostability of paliperidone was also studied by exposing the samples to sunlight for 72h. Major degradation of the drug was found in presence of cationic and non-ionic surfactants. Effect of titanium dioxide on the photo-degradation of paliperidone in solution state was also studied and it was found that 53% of the drug was degraded after 72h of exposure to sunlight. A common degradation peak was observed in oxidative and TiO2 photocatalysed samples. This peak may be due to the generation of N-oxide of paliperidone. The same degradation peak was also observed in all other photostability samples. Chromatographic separation of drug and its degradation products was achieved on an Alltima C8 (250mm×4.6mm, 5μm) analytical column, using a mobile phase consisting of acetonitrile-ammonium acetate buffer with 0.2% triethylamine (pH 3.5; 20mM) (60:40, v/v) at a flow rate of 1mL/min. Quantification was performed with UV detection at 280nm. The method was validated as per ICH guidelines.

Cyclodextrins in capillary electrophoresis enantioseparations--recent developments and applications

Capillary EKC has been established as a versatile and robust CE method for the separation of enantiomers. Within the chiral selectors added to the BGE CDs continue as the most widely used selectors due to their structural variety and commercial availability. This is reflected in the large number of practical applications of CDs to analytical enantioseparations that have been reported between January 2006 and January 2008, the period of time covered by this review. Most of these applications cover aspects of life sciences such as drug analysis, bioanalysis, environmental analysis, or food analysis. Moreover, new CD derivatives have been developed in an attempt to achieve altered enantioselectivities and to further broaden the application range. Finally, efforts will be summarized that aim at an understanding of the molecular level of the chiral recognition between CDs and the analytes.

The role of cyclodextrins in chiral capillary electrophoresis

The members of the enantiomeric pairs frequently show rather different biological effects, so their chiral selective synthesis, pharmacological studies and analysis are necessary. CE has unique advantages in chiral analysis. The most frequently used chiral selectors are CDs in this field. This paper gives a short view on the advantages on CE in direct chiral separations, emphasizing the role of CDs. The reason for the broad selectivity spectra of CDs is discussed in detail. The physical background of chiral selective separations is briefly shown in CE. Their interaction mechanisms are shortly defined. The general trend of their use is statistically evaluated. Most frequently used CDs and CD derivatives are characterized. Advantages of ionizable CDs and single-isomer derivatives are shown. The general trend of their use is established.