Multi-walled carbon nanotubes as the gas chromatographic stationary phase: Role of their functionalization in the analysis of aliphatic alcohols and esters

Performance of palm fibers as stationary phase for capillary gas chromatographic separations

Herein we report the first example of exploring bio-based materials, palm fibers (PFs), as a stationary phase for capillary gas chromatographic separations. The PFs capillary column was fabricated by the sol-gel coating method and showed a weak polar nature and high column efficiency over 4699 plates per m for n-dodecane, naphthalene and n-octanol. Importantly, the column exhibited high selectivity and resolving capability for more than a dozen mixtures covering a wide-ranging variety of analytes and isomers. In addition, it was applied for the determination of isomer impurities in real samples, proving its good potential for practical gas chromatographic analysis.

Application of Carbon Nanotubes in Chiral and Achiral Separations of Pharmaceuticals, Biologics and Chemicals

Carbon nanotubes (CNTs) possess unique mechanical, physical, electrical and absorbability properties coupled with their nanometer dimensional scale that renders them extremely valuable for applications in many fields including nanotechnology and chromatographic separation. The aim of this review is to provide an updated overview about the applications of CNTs in chiral and achiral separations of pharmaceuticals, biologics and chemicals. Chiral single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) have been directly applied for the enantioseparation of pharmaceuticals and biologicals by using them as stationary or pseudostationary phases in chromatographic separation techniques such as high-performance liquid chromatography (HPLC), capillary electrophoresis (CE) and gas chromatography (GC). Achiral MWCNTs have been used for achiral separations as efficient sorbent objects in solid-phase extraction techniques of biochemicals and drugs. Achiral SWCNTs have been applied in achiral separation of biological samples. Achiral SWCNTs and MWCNTs have been also successfully used to separate achiral mixtures of pharmaceuticals and chemicals. Collectively, functionalized CNTs have been indirectly applied in separation science by enhancing the enantioseparation of different chiral selectors whereas non-functionalized CNTs have shown efficient capabilities for chiral separations by using techniques such as encapsulation or immobilization in polymer monolithic columns.

Determination of n-alkanes contamination in soil samples by micro gas chromatography functionalized by multi-walled carbon nanotubes

A new method for separation of 11 n-alkanes: octane, o-nonane, n-decane, n-undecane, n-dodecane, n-tridecane, n-tetradecane, n-pentdecne, n-hexadecath, heptadecane, n-octadecane in soil samples was developed. Kuderna-Danish (K.D.) concentrator enrichment prior to ultrasonic extraction and the silicone chromatography column purification and with gas chromatography flame ionization detection (GC-FID) could be used for n-alkanes determination. The micro channels of open tubular column were fabricated onto a silicon wafer to replace the quartz capillary chromatographic column. The column structure and analysis parameters that affected the column separation were investigated and optimized. Under optimal conditions, the extract reagent was centrifuged and collected. A silicone chromatography column and a K.D. concentrator were used for further clean-up and enrichment. Using this method, the limits of detection (LOD) and limits of quantification (LOQ) were obtained in the range of 0.03-0.15 and 0.1-0.5 mg kg(-1) in soil samples, respectively. The relative standard deviation (RSD) was under 12%. The optimized procedure that presented good analytical performance (with recoveries ranging from 56.5% to 89.2%), was successfully applied to determine n-alkane content in farmland soil samples adjacent to a highway. The results showed that the MWCNTs-functionalized column is capable of separating the alkane contaminations with high resolution in about 3 min, which is much shorter than that of GC-MS and other conventional analytical methods, demonstrating its great potential for rapid analysis.

An innovative approach for separation and purification of natural products using carbon nanotube–alginate gel beads as a novel stationary phase

A new packing material is studied in preparative or semi-preparative liquid chromatography with high separation efficiency and quality.

Porous polymer monoliths functionalized through copolymerization of a C60 fullerene-containing methacrylate monomer for highly efficient separations of small molecules

Monolithic poly(glycidyl methacrylate-co-ethylene dimethacrylate) and poly(butyl methacrylate-co-ethylene dimethacrylate) capillary columns, which incorporate the new monomer [6,6]-phenyl-C(61)-butyric acid 2-hydroxyethyl methacrylate ester, have been prepared and their chromatographic performance have been tested for the separation of small molecules in the reversed phase. While addition of the C60-fullerene monomer to the glycidyl methacrylate-based monolith enhanced column efficiency 18-fold, to 85,000 plates/m at a linear velocity of 0.46 mm/s and a retention factor of 2.6, when compared to the parent monolith, the use of butyl methacrylate together with the carbon nanostructured monomer afforded monolithic columns with an efficiency for benzene exceeding 110,000 plates/m at a linear velocity of 0.32 mm/s and a retention factor of 4.2. This high efficiency is unprecedented for separations using porous polymer monoliths operating in an isocratic mode. Optimization of the chromatographic parameters affords near baseline separation of 6 alkylbenzenes in 3 min with an efficiency of 64,000 plates/m. The presence of 1 wt % or more of water in the polymerization mixture has a large effect on both the formation and reproducibility of the monoliths. Other factors such as nitrogen exposure, polymerization conditions, capillary filling method, and sonication parameters were all found to be important in producing highly efficient and reproducible monoliths.