Selective extraction of triazine herbicides based on a combination of membrane assisted solvent extraction and molecularly imprinted solid phase extraction

Environmentally sustainable needle hub in-syringe μ-SPE method using metal-organic gel for on-site extraction of polycyclic aromatic hydrocarbons in water samples

A green, simple, low-cost, miniaturized, and portable needle hub-in-syringe micro solid phase extraction (NH-IS-μ-SPE) method was developed using a green metal-organic gel (MOG) sorbent. Coupled with high-performance liquid chromatography diode array detector (HPLC-DAD), this approach enables efficient extraction and preconcentration of seven selected polycyclic aromatic hydrocarbons (PAHs) directly from environmental water samples, facilitating on-site sample preparation. Key parameters affecting extraction efficiency were systematically optimized, supported by molecular docking to elucidate interaction mechanisms. The method demonstrated excellent linearity across the range of 0.05-100 μg L-1 with high correlation coefficients (R2: 0.9985-0.9999 in blank water, 0.9906-0.9976 in domestic water, and 0.9923-0.9991 in river water). Limits of quantification and detection were achieved in the ranges of 0.02-1.2 μg L-1 and 0.008-0.4 μg L-1, respectively, with strong intra-, inter-day, and inter-batch precision (RSD ≤ 8.5 %). The proposed device demonstrated notable cost-effectiveness, attributed to the low raw material cost of Al-MOG (MYR 2.56 g-1) and its reusability for 10 extraction cycles. The analyte-loaded sorbents remained stable up to 5 days across diverse water matrices, revealing the method's potential for practical on-site extraction. Analysis of environmental water samples yielded satisfactory recoveries of 77.7-118.0 %. While the manual operation limits high-throughput applications, the approach adheres to green analytical chemistry principles by minimizing solvent and sample consumption. Comprehensive validations using GAPI, AGREE, AGREEprep, BAGI, and the RGB model confirm the method's practical applicability, environmental sustainability, and analytical performance in microextraction technologies.

Development and application of a membrane assisted solvent extraction-molecularly imprinted polymer based passive sampler for monitoring of selected pharmaceuticals in surface water

In this work, we demonstrate the development, evaluation and pre-liminary application of a novel passive sampler for monitoring of selected pharmaceuticals in environmental waters. The samplers were calibrated in laboratory-based experiments to obtain sampling rates (Rs) for carbamazepine, methocarbamol, etilefrine, venlafaxine and nevirapine. Passive sampling was based on the diffusion of the target pharmaceuticals from surface water through a membrane bag which housed an ionic liquid as a green receiving solvent and a molecularly imprinted polymer. Effects of biofouling, deployment time and solvent type for the receiver phase were optimized for selective uptake of analytes in surface water. Notably, there was a decrease in the uptake of selected pharmaceuticals and consequently a decrease in their sampling rates in the presence of biofouling. The optimum matrix-matched sampling rates ranged from 0.0007 - 0.0018 L d^-1 whilst the method detection and quantification limits ranged from 2.45 - 3.26 ng L^-1 and 8.06 - 10.81 ng L^-1, respectively. The optimized passive sampler was deployed in a dam situated in the heart of a typical highly populated township in the Gauteng Province of South Africa. Only etilefrine and methocarbamol were detected and quantified at maximum time weighted average concentrations of 12.88 and 72.29 ng L^-1, respectively.

Modified Peanut Shell as an Eco-Friendly Biosorbent for Effective Extraction of Triazole Fungicide Residues in Surface Water and Honey Samples before Their Determination by High-Performance Liquid Chromatography

An eco-friendly sample preparation method that is based on the use of a modified peanut shell as an efficient biosorbent for the extraction of triazole residues before their analysis by high-performance liquid chromatography was reported. The four triazole fungicides were separated on a Purospher STAR RP-18 endcapped (4.6 × 150 mm, 5 μm) column with a mobile phase of 50% (v/v) acetonitrile at a flow rate of 1.0 mL min^-1 and detection wavelength set at 220 nm. Peanut shells modified by didodecyldimethylammonium bromide were selected as an effective biosorbent material in the microextraction method. Scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy were used to characterize the biosorbent. The effect of dominant parameters on the proposed microextraction method including the amount of sorbent, kind and concentration of surfactant, sodium hydroxide concentration, kind and amount of salt, sample volume, adsorption time, kind and volume desorption solvent, and desorption time was studied. Under the optimum condition, a good analytical performance for the proposed microextraction method was obtained with a wide linear range within the range of 9-1000 μg L^-1, and low limits of detection (0.03 μg L^-1 for all analytes) were obtained. Enrichment factors were achieved within the range of 30-51. The intra and interday precision values were evaluated in terms of percentage relative standard deviations (%RSD) and were less than 0.09 and 5.34% for the retention time and peak area, respectively. The proposed microextraction methods were used for extraction and analysis of triazole fungicides in water and honey samples. The recoveries in a satisfactory range of 70.0-118.8% were obtained.

Multivariate optimization of a two-way technique for extraction of pharmaceuticals in surface water using a combination of membrane assisted solvent extraction and a molecularly imprinted polymer

This work demonstrates development and evaluation of a two-way technique based on the combination of membrane assisted solvent extraction and a molecularly imprinted polymer (MASE-MIP) for selective and efficient extraction of five selected pharmaceuticals belonging to five different therapeutic classes. The pharmaceuticals were extracted from surface water samples followed by liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-qTOF/MS) determination. A central composite design was applied to optimize the influence of the sample salt content, the stirring rate, the stirring time and the amount of MIP on the extraction of an anticonvulsant (carbamazepine), a cardiac stimulant (etilefrine), a muscle relaxant (methocarbamol), an antiretroviral (nevirapine) and an antidepressant (venlafaxine) from surface water. Optimization of the analytical method was performed by spiking water with a mixture of all five pharmaceuticals at 500 ng mL^-1. Optimum extraction conditions for a sample volume of 18 mL were found to be 5 g of salt content, a stirring rate of 400 rpm, an extraction time of 60 min and 50 mg of MIP. The MASE-MIP-LC-qTOF/MS method gave detection and quantification limits ranging from 0.09 to 0.20 ng mL^-1 and 0.31-0.69 ng mL^-1, respectively. The spiked river water samples yielded recoveries ranging from 38 to 91% for the selected model compounds belonging to the five classes of pharmaceuticals. Upon the application of the developed analytical method in water analysis, all selected pharmaceuticals were detected in South African river water with nevirapine and venlafaxine being more prominent attaining the maximum concentrations of 1.64 and 2.48 ng mL^-1, respectively.

Optimising factors affecting solid phase extraction performances of molecular imprinted polymer as recent sample preparation technique

Molecular imprinted solid-phase extraction is the technique that uses molecular imprinted polymer as the sorbent in solid phase extraction. Molecular imprinted solid-phase extraction is effective and efficient for the extraction process and cleaning as compared with solid phase extraction (SPE) without molecular imprinted polymer. The complexity of variables in molecular imprinted solid-phase extraction arise as problems in the analysis, therefore it is necessary to optimize the extraction conditions of molecular imprinted solid-phase extraction. To achieve the sorption equilibrium and achieve the shortest time, certain parameters such as contact time, ion strength of sample, pH of sample, amount of sorbent, sample flow rate, addition of salt and buffer solution, washing solvent, elution solvent, and loading solvent need to be optimized. The selection of suitable properties and quantities of each factor greatly affect the formation of appropriate interactions between the sorbent and analytes. Percentage recovery is also influenced by formation of the appropriate bonds, sample flow rates, extraction time, salt addition, and sorbent mass. Therefore, in the future, molecular imprinted solid-phase extraction optimization has to consider and adjust various factors reviewed in this paper to form appropriate interactions between the absorbent and target molecules which have an impact on the optimal results.

Synthesis of molecularly imprinted nanoparticles for selective exposure assessment of permethrin: optimization by response surface methodology

BACKGROUND

Extensive use of high-efficiency pyrethroid pesticides as pest-control agents lead to remarkable adsorption and release of these materials in soil and aquatic environment which could have serious adverse effects on water and food chain quality as well as human health. In this study, a molecularly imprinted polymer was synthesized and used as a selective sorbent in the sample preparation procedure in order to facilitate sensitive and quantitative exposure assessment of insecticide permethrin.

METHODS

Molecular imprinted nanoparticles were prepared by precipitation polymerization technique using 1:4:20 mmol ratio of the template, functional monomer, and cross-linker, respectively, as well as 80 mL of chloroform as progen solvent. The obtained nanoparticles were characterized by field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectrometry (FT-IR). The optimization of critical variables in the MISPE process was done using the central composite design (CCD) of the response surface methodology.

RESULTS

Quadratic regressional models were developed to correlate the response and independent variables and the analysis of variance (ANOVA) verified the excellent fitting of proposed models for experimental data. Optimum conditions for the highest MISPE yield were selected as follow: sorbent mass of 7.71 mg, sample pH 5.58 and 5.68 for cis and trans-permethrin, respectively, sample flow rate of 0.6 mL/min, as well as 5 and 3.94 mL of methanol/acetic acid at the flow rate of 2 mL/min as elution solvents for cis and trans-permethrin, respectively. Under optimized conditions, the linear range was obtained 20-120 μg/L (R2 = 0.99) and the detection limits were 5.51 and 5.72 μg/L for cis and trans-permethrin, respectively. Analysis of real samples demonstrated the high extraction efficiency of designed protocol ranging from 93.01 to 97.14 with the relative standard deviation (RSD) less than 4.51%.

CONCLUSIONS

The satisfactory results confirmed the reliability and efficiency of the proposed method for trace analysis of permethrin isomers in biological and environmental samples.

A new strategy for surface modification of polysulfone membrane by in situ imprinted sol–gel method for the selective separation and screening ofl-Tyrosine as a lung cancer biomarker

Schematic representation of surface modification of polysulfone membrane byin situMIP sol–gel process.

Magnetic mesoporous imprinted adsorbent based on Fe3O4-modified sepiolite for organic micropollutant removal from aqueous solution

A novel magnetic molecularly imprinted polymer adsorbent based on a magnetic sepiolite composite was successfully prepared for the first time. It has a maximum adsorption capacity of 69.53 mg g⁻¹for atrazine.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Developments and trends of molecularly imprinted solid-phase microextraction

This review focuses on a solid-phase microextraction (SPME) method coupled with molecularly imprinted polymers (MIPs), namely molecularly imprinted solid-phase microextraction (MISPME). The first two sections discuss the summaries of conventional SPME and MIPs. The third section reviews the development of MISPME in past years, including the preparation of MISPME, and the applications to compounds in real samples.

Liquid-liquid-solid microextraction and detection of nerve agent simulants by on-membrane Fourier transform infrared spectroscopy

A coupling of novel liquid-liquid-solid microextraction (LLSME) technique based on porous hydrophobic membrane and Fourier-transform infrared spectroscopy has been presented for the detection, identification and quantification of markers and simulants of nerve agents. Two isomers O,O'-dihexyl methylphosphonate (DHMP) and O,O'-dipentyl isopropylphosphonate (DPIPP) were chosen as model analytes for the study. In the present technique, organic phase was immobilised within the pores of membrane after fixing it in an assembly, which was then immersed into aqueous sample of target analytes for extraction. The analytes were directly determined on the surface of membrane by FTIR spectroscopy without elution. On comparison with solid phase microextraction (SPME), LLSME was found to be much more efficient. The method was optimised and quantitative analyses were performed using calibration curves obtained via Beer's law and employing processing of spectra obtained, via a multivariate calibration technique partial least square (PLS). Relative standard deviations (RSDs) for intraday repeatability and interday reproducibility were found to be in the range of 0.20-0.50% and 0.20-0.60%, respectively. Limit of detection (LOD) was achieved up to 15 ng mL(-1). Applicability of the method was tested with an unknown real sample obtained in an international official proficiency test (OPT).

Rationally designed molecularly imprinted polymers for selective extraction of methocarbamol from human plasma

Molecularly imprinted polymers (MIPs) with high selectivity toward methocarbamol have been computationally designed and synthesized based on the general non-covalent molecular imprinting approach. A virtual library consisting of 18 functional monomers was built and possible interactions between the template and functional monomers were investigated using a semiempirical approach. The monomers with the highest binding scores were then considered for additional calculations using a more accurate quantum mechanical (QM) calculation exploiting the density functional theory (DFT) at B3LYP/6-31G(d,p) level. The cosmo polarizable continuum model (CPCM) was also used to simulate the polymerization solvent. On the basis of computational results, acrylic acid (AA) and tetrahydrofuran (THF) were found to be the best choices of functional monomer and polymerization solvent, respectively. MIPs were then synthesized by the precipitation polymerization method and used as selective adsorbents to develop a molecularly imprinted solid-phase extraction (MISPE) procedure before quantitative analysis. After MISPE the drug could be determined either by differential pulse voltammetry (DPV), on a glassy carbon electrode modified with multiwalled-carbon nanotubes (GC/MWNT), or high performance chromatography (HPLC) with UV detection. A comparative study between MISPE-DPV and MISPE-HPLC-UV was performed. The MISPE-DPV was more sensitive but both techniques showed similar accuracy and precision.