Novel molecularly imprinted microsphere using a single chiral monomer and chirality-matching (S)-ketoprofen template

Thiol-maleimide click reaction-driven imprinted polymer for chiral resolution of indoprofen

Indoprofen (INP) comprises two enantiomers, R- and S-, whose high pharmacological efficacy is realized only in the case of the separated enantiomers. A newly synthesized poly(acrylonitrile-co-divinylbenzene) (PANB)-based sorbent with selective affinity to the S-enantiomer of INP was applied to separate INP racemate. The synthesis was performed by suspension polymerization with low-crosslinked PANB microparticles and by reaction of the inserted nitriles with 1-amino-1H-pyrrole-2,5‑dione (Ma-NH2). The cationic maleimide-hydrazidine was then attached to the polymer particles, followed by its loading with anionic S-INP. In the post-crosslinking, ethane-1,2-dithiol (ETH) was used as a crosslinker through a thiol-maleimide click reaction, which attached the ETH to the maleimide groups in Ma-P. Acidic elution released S-INP enantiomers through specific receptor sites formed in the imprinted polymer particles, S-INP-P. Characterization of the polymers was done by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (13C NMR), and X-ray diffraction (XRD) while the surface morphology of the sorbents was investigated by scanning electron microscope (SEM). Optimum conditions for the enantioselective adsorption indicated that at pH 7, 285 mg/g of S-INP can be extracted. The chiral separation of the INP racemate led to an ee of 85% for R-INP in the first run and 97% for S-INP during elution.

Design and synthesis of S-citalopram-imprinted polymeric sorbent: Characterization and application in enantioselective separation

The current work describes the efficient creation and employment of a new S-citalopram selective polymeric sorbent, made from poly(divinylbenzene-maleic anhydride-styrene). The process began by using suspension polymerization technique in the synthesis of poly(styrene-maleic anhydride-divinylbenzene) microparticles. These were then modified with ethylenediamine, developing an amido-succinic acid-based polymer derivative. The S-citalopram, a cationic molecule, was loaded onto these developed anionic polymer particles. Subsequently, the particles were post-crosslinked using glyoxal, which reacts with the amino group residues of ethylenediamine. S-citalopram was extracted from this matrix using an acidic solution, which also left behind stereo-selective cavities in the S-citalopram imprinted polymer, allowing for the selective re-adsorption of S-citalopram. The attributes of the polymer were examined through methods such as 13C NMR, FTIR, thermogravemetric and elemental analyses. SEM was used to observe the shapes and structures of the particles. The imprinted polymers demonstrated a significant ability to adsorb S-citalopram, achieving a capacity of 878 mmol/g at a preferred pH level of 8. It proved efficient in separating enantiomers of (±)-citalopram via column methods, achieving an enantiomeric purity of 97 % for R-citalopram upon introduction and 92 % for S-citalopram upon release.

Synthesis, column packing and liquid chromatography of molecularly imprinted polymers for the acid black 1, acid black 210, and acid Brown 703 dyes

Molecularly imprinted polymers have been synthesized for the acid black 1, acid black 210, and acid brown 703 dyes using methacrylic acid, ethylene glycol, and azobisisobutyronitrile as the monomer, cross-linker, and initiator, respectively, in the ratio of 1 : 10 : 44 (template:monomer:cross-linker). The MIPs were used for the selective removal of their corresponding dyes. The selective nature of the MIPs towards their respective dyes was confirmed by a homemade liquid chromatography system. The resultant polymer materials were packed in a stainless steel column and checked for the separation of mixtures of dyes in liquid chromatography. The dyes complementary in structure to the imprinted cavities in the MIPs had long retention times, showing the highly selective nature of the MIPs. The pH, quantity of the MIPs, time, and concentration of the dyes were optimized for the highly efficient removal of the newly synthesized MIP adsorbents in batch adsorption studies. First-order, second-order, and intra-particle diffusion models were applied to all the three MIP-based adsorbents for their kinetic investigations towards the dyes. All the three MIPs selectively absorbed their target template molecule in the presence of four other template dyes having closely related structures with % RSD < 4% for the three batch experiments. The synthesized MIPs were characterized by FTIR, SEM imaging and liquid chromatography. FTIR results strongly confirmed the presence of hydrogen bonding interactions (600–900) between the template and the individual monomers present in the unwashed MIPs. Liquid chromatography revealed the highly selective nature of the MIPs towards their template molecules. The synthesized polymeric substances possess excellent thermal, chemical, and mechanical stability and can be reused several hundred times. The MIPs were applied in the removal of dyes from spiked water samples (river water, tap water and distilled water) where the % removal of the dyes by their corresponding MIPs was greater than 90%.

MIP synthesis for the recently emerging dyes, a new method for their characterization in liquid chromatography by packing packing the MIP particles in a stainless steel column, and their application in environmental remediation.

Magnetic Molecularly Imprinted Polymers Based on Dehydroabietylamine as Chiral Monomers for the Enantioseparation of RS-Mandelic Acid

Stereoselective adsorption of the enantiomers shows potential in the resolution of a racemate. In this work, we synthesized novel magnetic surface molecularly imprinted polymers (MIPs) on the surface of the γ-methacryloxypropyltrimethoxysilane (MPS)-modified Fe₃O₄@SiO₂ particles to utilize chiral dehydroabietylamine (DHA) as a functional monomer and R-mandelic acid as a template molecule (DHA-MIPs). We performed the resolution of mandelic acid racemate (RS-MA) via adsorption on the as-prepared MIPs. The results revealed that the MIPs have good affinity and high adsorption capacity for R-MA and show better enantioselective adsorption ability for R-MA than that for S-MA. One-stage adsorption of RS-MA on the MIPs can achieve up to 53.7% enantiomeric excess (ee) for R-MA. These help us to improve the chiral separation ability of the traditional MIPs using a chiral rather than an achiral monomer in MIP preparation. The MIPs can be employed as an economic and efficient adsorbent for chiral separation of MA racemate.

Molecularly imprinted polymer nanoparticles for olanzapine recognition: application for solid phase extraction and sustained release

The aim of this study was to prepare efficient imprinted polymer nanoparticles from an olanzapine template for the controlled release of olanzapine as a therapeutic drug for CNS diseases.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.