A two-dimensional, heart-cutting preparative gas chromatograph facilitates highly resolved single-compound isolations with utility towards compound-specific natural abundance radiocarbon (14C) analyses

A methodological review of compound-specific radiocarbon analysis for polycyclic aromatic hydrocarbons in environmental matrices

Identifying the sources of polycyclic aromatic hydrocarbons (PAHs) in complex environmental matrices is essential for understanding the impact of combustion-related human activities on the environment. Since the turn of the century, advances in analytical capability and accuracy of accelerator mass spectrometry (AMS) have made it possible to accurately determine the source apportionment of PAHs based on their radiocarbon (14C) mass conservation. This also allows us to trace the environmental transport processes of PAHs from the perspective of molecular 14C. However, natural environmental matrices have very low concentrations of PAHs (ppb to ppm level). To meet the requirements of carbon weight for 14C measurement by AMS, trace PAHs in complex environmental matrices must be enriched thousands of times, and then higher purity individual PAH molecules should be obtained through a series of complex purification procedures. Therefore, the technical difficulty is the main challenge in expanding the application of compound-specific 14C analysis in environmental science. This article reviews the detailed pretreatment procedures for 14C measurement of specific PAHs, including sample enrichment, extraction and purification of aromatic components, preparation of compound-specific PAHs by preparative capillary gas chromatography, graphitization of samples with ultra-small carbon content, and relevant quality control and assurance procedures. This study aims to help environmental geoscientists understand the technical process of 14C analysis of PAHs and inspire new scientific questions related to environmental science. To our knowledge, this is the first comprehensive review of the technical method of compound-specific 14C analysis for PAHs.

Two-dimensional gas chromatography coupled to isotope ratio mass spectrometry for determining high molecular weight polycyclic aromatic hydrocarbons in sediments

The accuracy of compound-specific isotope analysis (CSIA) of trace-level pollutants in complex environmental samples has always been limited by two main challenges: poor chromatographic separation and insufficient amounts of analytes. In this study, a two-dimensional gas chromatography-isotope ratio mass spectrometry (2DGC-IRMS) system was constructed for compound-specific δ¹³C analysis of high molecular weight polycyclic aromatic hydrocarbons (HMW-PAHs) in estuarine/marine sediments. This construction occurred through hyphenating an extra gas chromatography system (GC) to a conventional GC-IRMS using a commercially available multi-column switching-cryogenic trapping system (MCS-CTS). Compared with the previous 2DGC-IRMS strategy, which utilizes a Deans Switch device, the newly implemented 2DGC-IRMS scheme resulted in online purification of target analytes as well as enriched them online via duplicate injection and cryogenic trapping in CTS; this resultingly lowered the limits of detection (LOD) of CSIA. To improve the sample transfer efficiency to the IRMS, a broader-bore and longer fused-silica capillary was utilized to replace the original sample capillary running from the sample open split to the IRMS. A ẟ¹³C analysis of PAH standards showed accurate ẟ¹³C values, and high precisions (standard deviations 0.13-0.37%) were achieved, with the LOD of HMW-PAHs reduced to at least 1.0 mg/L (i.e., 0.07 to 0.09 nmol carbon per compound on-column). The successful application of this newly developed 2DGC-IRMS scheme provides a practical solution for the reliable CSIA of trace-level pollutants in complex environmental samples that cannot be measured using the conventional GC-IRMS system.

Collection and identification of an unknown component from Eugenia uniflora essential oil exploiting a multidimensional preparative three-GC system employing apolar, mid-polar and ionic liquid stationary phases

The present research deals with the collection and structural elucidation of an unknown component, accounting for about 35% of the essential oil obtained upon distillation of the leaves of Eugenia uniflora L., harvested during summer (January, 2017) in Paraná State (Southern Brazil). A multidimensional gas chromatographic preparative system, based on the coupling of three GC systems equipped with apolar, PEG and ionic liquid-based stationary phases, was successfully applied for the isolation of the chromatographic band relative to the unknown molecule. The use of wide-bore columns allowed for an increased sample capacity compared to conventional micro-bore columns, thus the injection of a neat sample was feasible, greatly reducing the total collection time. A higher chromatographic efficiency was afforded by the use of a multidimensional approach in the heart-cut mode, exploiting the different selectivity of three stationary phases, which ensured the attainment of a highly pure fraction. In only five runs, more than 3 milligrams were collected, with an average purity greater then 95%. Finally, the unknown component was subjected to nuclear magnetic resonance spectroscopy, mass spectrometry and condensed phase Fourier-transform infrared spectroscopy, leading to the identification of 6-ethenyl-6-methyl-3,5-di(prop-1-en-2-yl)cyclohex-2-en-1-one. The presented approach has been demonstrated to be effective for the isolation and structural elucidation of unknown molecules in complex samples, which will allow for further in-depth studies, like biological evaluation or pharmacological tests.

Fossil Fuel-Derived Polycyclic Aromatic Hydrocarbons in the Taiwan Strait, China, and Fluxes across the Air-Water Interface

On the basis of the application of compound-specific radiocarbon analysis (CSRA) and air-water exchange models, the contributions of fossil fuel and biomass burning derived polycyclic aromatic hydrocarbons (PAHs) as well as their air-water transport were elucidated. The results showed that fossil fuel-derived PAHs (an average contribution of 89%) presented the net volatilization process at the air-water interface of the Taiwan Strait in summer. Net volatile fluxes of the dominant fluorene and phenanthrene (>58% of the total PAHs) were 27 ± 2.8 μg m^-2 day^-1, significantly higher than the dry deposition fluxes (average 0.43 μg m^-2 day^-1). The Δ¹⁴C contents of selected PAHs (fluorene, phenanthrene plus anthracene, fluoranthene, and pyrene) determined by CSRA in the dissolved seawater ranged from -997 ± 4‰ to -873 ± 6‰, indicating that 89-100% (95 ± 4%) of PAHs were supplied by fossil fuels. The South China Sea warm current originating from the southwest China in summer (98%) and the Min-Zhe coastal current originating from the north China in winter (97%) input more fossil fuel PAHs than the Jiulong River estuary (90%) and Xiamen harbor water (93%). The more radioactive decayed ¹⁴C of fluoranthene (a 4-ring PAH) than that of phenanthrene and anthracene (3-ring PAHs) represented a greater fossil fuel contribution to the former in dissolved seawater.

Improving the productivity of a multidimensional chromatographic preparative system by collecting pure chemicals after each of three chromatographic dimensions

The enhanced sample collection capability of a heart-cutting three-dimensional GC-prep system is reported. In its original configuration, a highly pure component can be usually collected after the last (3D) column outlet by means of a dedicated preparative station. The latter is located after the last chromatographic column, and this poses the requirement for multiple heart cuts even for those components showing satisfactory degree of purity after the first (or second) separation dimension. The feasibility to collect pure components after each chromatographic dimension is here described, employing a three-dimension MDGC system equipped with high-temperature valves, located inside the first and second GC ovens, with the aim to improve the productivity of the collection procedure. In addition to a commercial preparative collector located at the 3D outlet, two laboratory-made collection systems were applied in the first and second dimension, reached by the effluent to be collected trough a high-temperature valve switching the heart-cut fraction between either the detector (FID), or the collector. Highly pure sesquiterpene components were collected, namely: patchouli alcohol after the first column [poly(5% diphenyl/95% dimethylsiloxane)], α-bulnesene after a second column coated with high molecular weight polyethylene glycol, and α-guaiene after an ionic-liquid based column (SLB-IL60), used as the third dimension. Purity levels ranging from 85 to 95% were achieved with an average collection recovery of 90% (n=5). The following average amounts were collected per run: 160μg for α-guaiene, 295μg for α-bulnesene, and 496μg for patchouli alcohol.

Performance evaluation of a versatile multidimensional chromatographic preparative system based on three-dimensional gas chromatography and liquid chromatography-two-dimensional gas chromatography for the collection of volatile constituents

The present research deals with the multi-collection of the most important sesquiterpene alcohols belonging to sandalwood essential oil, as reported by the international regulations: (Z)-α-santalol, (Z)-α-trans bergamotol, (Z)-β-santalol, epi-(Z)-β-santalol, α-bisabolol, (Z)-lanceol, and (Z)-nuciferol. A versatile multidimensional preparative system, based on the hyphenation of liquid and gas chromatography techniques, was operated in the LC-GC-GC-prep or GC-GC-GC-prep configuration, depending on the concentration to be collected from the sample, without any hardware or software modification. The system was equipped with a silica LC column in combination with polyethylene glycol-poly(5% diphenyl/95% dimethylsiloxane)-medium polarity ionic liquid or β-cyclodextrin based GC stationary phases. The GC-GC-GC-prep configuration was exploited for the collection of four components, by using a conventional split/splitless injector, while the LC-GC-GC-prep approach was applied for three low abundant components (<5%), in order to increase the quantity collected within a single run, by the LC injection of a high sample amount. All target compounds, whose determination is hampered by the unavailability of commercial standards, were collected at milligram levels and with a high degree of purity (>87%).

Rapid isolation of high solute amounts using an online four-dimensional preparative system: normal phase-liquid chromatography coupled to methyl siloxane-ionic liquid-wax phase gas chromatography

This study reports the recent evolution of a multidimensional GC-GC-GC preparative system, now combined with an online LC preseparation step, operated under normal phase conditions. It is herein shown that the four-dimensional instrument can collect sample components with a concentration lower than 10%, in a short time period, while maintaining a high level of analyte purity. The LC dimension allows (I) the injection of higher sample amounts, compared to "direct" GC injection; (II) a polarity-based preseparation, leading to the GC injection of simplified subsamples, and thus reducing the possibility of coelutions; (III) to eliminate the essential-oil "matrix", replacing it with the LC mobile phase (the GC system is more protected from potential contamination); (IV) the LC mobile phase is of much lower viscosity with respect to a pure, or highly concentrated essential oil, avoiding difficulties in the syringe sample withdrawal process, prior to GC injection. System optimization was performed by using standard solutions; in addition, a very complex sample, namely, vetiver essential oil, was subjected to the preparative process, with the scope of isolating two low-amount constituents (namely, α-amorphene and β-vetivone). The latter two sesquiterpenoids, which accounted for 1.7 and 4.0% of the sample (considering the volatiles), respectively, were successfully collected at the milligram level, in a one-day work period, with a purity degree in excess of 90%.

Heart-cutting two-dimensional gas chromatography in combination with isotope ratio mass spectrometry for the characterization of the wax fraction in plant material

Gas chromatography coupled to isotope ratio mass spectrometry after on-line combustion (GC-C-IRMS) and high temperature conversion (GC-HTC-IRMS) is used for compound specific isotope ratio determination. This determination can only be performed successfully if the target solutes are fully resolved from other compounds. A new instrumental set-up consisting of heart-cutting two-dimensional GC based on capillary flow technology and a low thermal mass GC oven in combination with an isotope ratio mass spectrometer is presented. Capillary flow technology was also used in all column and interface connections for robust and leak-free operation. The new configuration was applied to the characterization of wax compounds in tobacco leaf and corresponding smoke samples. It is demonstrated that high accuracy is obtained, both in the determination of δ(13)C and δ(2)H values, allowing the study of biosynthesis and delivery mechanisms of naturally occurring compounds in tobacco.

Preparative gas chromatography and its applications

Although hundreds of papers related to preparative gas chromatography (pGC) have been published since the late 1950s, the success of the GC technique has largely been associated with analytical instead of preparative purposes. Actually, pGC is an ideal alternative technique for the preparation of pure substances, especially volatile compounds. This paper reviews the papers (written in English) associated with pGC published over the period from the 1950s to the 2010s. For large scale preparation, large sample injection and vaporization, a high loading capacity column, a gas splitter at the end of the column and a special collecting device are fundamentally important for a pGC system. The primary components of pGC system, including injector, column, splitter, detector and collection traps, are briefly introduced. Furthermore, the applications of pGC in the separation and purification of volatile compounds from natural essential oils, in addition to the purification of isotopes, isomers and enantiomers are summarized.