Adenine-coated magnetic multiwalled carbon nanotubes for the selective extraction of aristolochic acids based on multiple interactions

Berberine-based hypercrosslinked polymer: Advanced solid-phase microextraction for high-throughput analysis of aristolochic acids in environmental water and herbal plants

In this study, a novel berberine based anion-exchanged hypercrosslinked polymer (BBR-HCPs) was synthesized via Friedel-Crafts alkylation using dimethoxymethane as a cross-linking agent. The proposed BBR-HCPs polymer exhibited excellent adsorption capacities for aristolochic acids (AAs). Moreover, there are various interactions such as hydrophobic, π-π stacking, hydrogen bonding, and electrostatic interactions between BBR-HCPs and AAs. A solid phase microextraction (SPME) coating, prepared with BBR-HCPs as the sorbent and polyacrylonitrile (PAN) as the binder, was applied for the determination of AAs in herbal plants using a 24-well plate for high-throughput, with instrumental analysis carried out via high performance liquid chromatography with diode array detector (HPLC-DAD). The optimized and validated BBR-HCPs-SPME/HPLC-DAD method exhibited excellent linearity over range of 5-400 ng mL-1 with R2 > 0.9974. Detection limits (S/N = 3) for AAs were found to be 0.03-0.150 ng mL-1, with recoveries ranging from 82.6 to 117.8 % and relative standard deviations (RSDs) less than 10.49 %. This study underscores the potential of BBR-HCPs as a promising adsorbent for selective extraction and enrichment of AAs while introducing a reliable novel strategy for monitoring trace amounts of AAs in water and herbal plant samples.

Application of Polydopamine-Based Magnetic Solid-Phase Extraction for Highly Sensitive Determination of Aristolochic Acid I from Traditional Chinese Medicine Samples

A low cost-effective and simple synthesis method combining magnetic solid-phase extraction (MSPE) and high-pressure liquid chromatography was developed for the analysis of aristolochic acids I (AAI) in traditional Chinese medicine samples. A novel polydopamine (PDA) modified magnetic nanoparticles with one single carbon layer (Fe3O4@1C NPs) via one-pot hydrothermal approach was prepared and then successfully employed to extract AAI for the first time. Dopamine (DA) can form a PDA layer on Fe3O4@1C NPs surface through self-polymerization to form Fe3O4@1C@PDA. As a surface modifier of DA, PDA offered more adsorption sites to AAI due to π-π stacking, hydrogen bonding and electrostatic interactions. The parameters of MSPE were optimized by univariate and multivariate methods (Box-Behnken design) in detail. High degree of linearity was obtained in the range of 0.05-200.0 μg/mL. The limits of detection (S/N = 3) and quantification (S/N = 10) were 0.08 and 0.25 μg/mL, respectively. The recoveries of AAI in spiked Xiaoqinglong mixture samples were in the range of 86.7 to 108.5% with the relative standard deviation of less than 5.2%. Thus, a fast, convenient, sensitive and eco-friendly method was successfully proposed and became a promising approach for the determination of AAI in herbal plants or its preparation in the manufacturing procedure.

Multivariate surface self-assembly strategy to fabricate ionic covalent organic framework surface grafting monolithic sorbent for enrichment of aristolochic acids prior to high performance liquid chromatography analysis

Herein, an ionic covalent organic framework (iCOF) surface grafting monolithic sorbent was prepared by the multivariate surface self-assembly strategy for in-tube solid-phase microextraction (SPME) of trace aristolochic acids (AAs) in serum, traditional Chinese medicines (TCMs) and Chinese patent drug. Via adjusting the proportion of ionic COF building block during the self-assembly, the density of quaternary ammonium ions in the iCOF was modulated for the enhanced adsorption of AAs. The successful preparation of iCOF surface grafting monolithic sorbent was confirmed by different means. A multiple mode mechanism involving π-π stacking, hydrophobic, electrostatic and hydrogen-bonding interactions was primarily attributed to the adsorption. Several in-tube SPME operating conditions, such as the dosage of ionic COF building block, ACN percentage and TFA percentage in the sampling solution, ACN percentage and TFA percentage in eluent and the collection time span, were optimized to develop the online in-tube SPME-HPLC method for analysis of AAs. Under the optimized conditions, a good linearity was obtained in the concentration range of 20-1000 ng/mL for target AAs in serum samples, the limits of detection (LODs) were less than 10 ng/mL, while the recoveries ranged from 90.3 % to 98.7 % with RSDs (n = 5) below 7.9 %. This study developed a feasible approach to iCOF functionalized monolithic sorbent for SPME and further exhibited the vast potential for the application of COF based monolithic sorbent in sample preparation.

Detection and Removal of Aristolochic Acid in Natural Plants, Pharmaceuticals, and Environmental and Biological Samples: A Review

Aristolochic acids (AAs) are a toxic substance present in certain natural plants. Direct human exposure to these plants containing AAs leads to a severe and irreversible condition known as aristolochic acid nephropathy (AAN). Additionally, AAs accumulation in the food chain through environmental mediators can trigger Balkan endemic nephropathy (BEN), an environmental variant of AAN. This paper presents a concise overview of the oncogenic pathways associated with AAs and explores the various routes of environmental exposure to AAs. The detection and removal of AAs in natural plants, drugs, and environmental and biological samples were classified and summarized, and the advantages and disadvantages of the various methods were analyzed. It is hoped that this review can provide effective insights into the detection and removal of AAs in the future.

A dispersive solid-phase extraction method for the determination of Aristolochic acids in Houttuynia cordata based on MIL-101(Fe): An analytes-oriented adsorbent selection design

In view of the molecular structure of Aristolochic acid I (AA-I) and Aristolochic acid II (AA-II), MIL-101(Fe) was selected as the sorbent to develop a dispersive solid-phase extraction (d-SPE) method for capturing the two analytes from Houttuynia cordata. The interactions between the sorbent and analytes were investigated by FT-IR, XPS and UV-Vis DRS spectra. The optimized method demonstrated good linearity with R² > 0.9999. The limit of detections (LODs) were 0.007 mg/L and 0.014 mg/L for AA-I and AA-II, respectively, lower than the limit stipulated by Chinese Pharmacopoeia (0.001 %, w/w). The recoveries for AA-I and AA-II were within the range of 73.3-106.4 %. The precisions of intra-day and inter-day were 0.9-5.8 % and 2.1-5.8 %, respectively. Thus, the established method demonstrated to be efficient and reliable to determine AA-I and AA-II in Houttuynia cordata.

Aristolochic acid I as an emerging biogenic contaminant involved in chronic kidney diseases: A comprehensive review on exposure pathways, environmental health issues and future challenges

Described in the 1950s, Balkan Endemic Nephropathy (BEN) has been recognized as a chronic kidney disease (CKD) with clinical peculiarities and multiple etiological factors. Environmental contaminants - aromatic compounds, mycotoxins and phytotoxins like aristolochic acids (AAs) - polluting food and drinking water sources, were incriminated in BEN, due to their nephrotoxic and carcinogenic properties. The implication of AAs in BEN etiology is currently a highly debated topic due to the fact that they are found within the Aristolochiaceae plants family, used around the globe as traditional medicine and they were also incriminated in Aristolochic Acid Nephropathy (AAN). Exposure pathways have been investigated, but it is unclear to what extent AAs are acting alone or in synergy with other cofactors (environmental, genetics) in triggering kidney damage. Experimental studies strengthen the hypothesis that AAI, the most studied compound in the AAs class, is a significant environmental contaminant and a most important causative factor of BEN. The aim of this review is to compile information about the natural exposure pathways to AAI, via traditional medicinal plants, soil, crop plants, water, food, air. Data that either supports or contradicts the AAI theory concerning BEN etiology was consolidated and available solutions to reduce human exposure were discussed. Because AAI is a phytotoxin with physicochemical properties that allow its transportation in environmental matrices from different types of areas (endemic, nonendemic), and induce CKDs (BEN, AAN) and urinary cancers through bioaccumulation, this review aims to shed a new light on this compound as a biogenic emerging pollutant.

Analysis of aristolochic acid I in mouse serum and tissues by using magnetic solid-phase extraction and UHPLC-MS/MS

A method combining magnetic solid-phase extraction (MSPE) and ultra-high-pressure liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) was developed for the analysis of aristolochic acids I (AAI) in mouse serum and tissues. The magnetic covalent organic frameworks (MNP@COF)-based MSPE exhibited high adsorption capacity towards AAI (93.1 mg/g) in optimal conditions. After MSPE extraction, AAI was separated with C18 column using gradient elution and quantified (m/z 342.21 → 298.13) by UHPLC-MS/MS with monitor reaction monitoring (MRM) mode. This MSPE-based UHPLC-MS/MS method was validated with respected to lower limit of quantification (LLOQ), linearity, recovery, precision and accuracy of intra- and inter-day, and matrix effect. Good calibration linearities at the range of 1-500 ng/L for AAI in biological matrices (serum, kidney, and liver) with high correlation coefficient (R²) > 0.9970, and high enrichment factors (mean values from 1038 to 1045) were obtained. This method was highly sensitive to determine AAI with LLOQ within the range of 4.62-5.24 ng/L in extracted serum, kidney, and liver samples. Recoveries at 5, 50, 100 and 300 ng/L in biological samples ranged from 93.2 to 104.0%, and intra- and inter day accuracy and precision (defined as bias and coefficient of variation, respectively) were below ± 15%. The method was successfully applied in the analysis of biological samples collected from mice exposed with AAI with concentrations range of 0.007-0.041 μg/L for consecutive four days. The established method might be applied for the investigation of risk assessment and toxicity induced by long-time use of AAI-containing herbs or dietary supplements.

Recent advances in magnetic carbon nanotubes: synthesis, challenges and highlighted applications

Magnetic carbon nanotubes (MCNTs), consisting of carbon nanotubes (CNTs) and magnetic nanoparticles (MNPs), have enormous exploration and application potentials due to their superior physical and chemical properties, such as unique magnetism and high enrichment performance. This review concentrates on the rapid advances in the synthesis and application of magnetic carbon nanotubes. Great progress has been made in the preparation of MCNTs by developing methods including chemical vapor deposition, pyrolysis procedure, sol-gel process, template-based synthesis, filling process and hydrothermal/solvothermal method. Various applications of MCNTs as a mediator of the adsorbent in magnetic solid-phase extraction, sensors, antibacterial agents, and imaging system contrast agents, and in drug delivery and catalysis are discussed. In order to overcome the drawbacks of MCNTs, such as sidewall damage, lack of convincing quantitative characterization methods, toxicity and environmental impact, and deficiency of extraction performance, researchers proposed some solutions in recent years. We systematically review the latest advances in MCNTs and discuss the direction of future development.

Methacrylic functionalized hybrid carbon nanomaterial for the selective adsorption and detection of progesterone in wastewater

Progesterone, an endocrine-disrupting chemical, has been frequently detected in wastewater for decades, posing a serious threat to ecological and human health. However, it is still a challenge to achieve the effective detection of progesterone in complex matrices water samples. In this study, a novel adsorbent CNT@CS/P(MAA) was prepared by grafting methacrylic polymers on the surface of modified carbon nanomaterials. Compared with other reported materials, the hybrid carbon nanomaterial could selectively identify the progesterone in the complex industrial pharmaceutical wastewater, and its adsorption performance is almost independent of the pH and environmental temperature. In addition, this nanomaterial could be reused with a good recovery rate. The prepared nanomaterials were characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, nitrogen adsorption and desorption experiments, and thermogravimetric analysis. The results confirmed that the methacrylic polymers and chitosan layer were successfully grafted on the surface of carbon nanotubes. Adsorption isotherms, adsorption kinetics, and selectivity tests showed that CNT@CS/P(MAA) had a high adsorption capacity (44.45 mg·g-1), a fast adsorption rate and a satisfied selectivity for progesterone. Then, CNT@CS/P(MAA) was used as solid phase extraction sorbent and combined with HPLC to enrich progesterone from the wastewater samples. Under the optimum conditions, a good linearity was obtained with the correlation coefficient was 0.9998, and the limit of detection was 0.003 ng·mL-1. Therefore, this method could be used for the selective and effective detection of progesterone in industrial wastewater with complex substrates and provided a new method for the detection of progesterone in other environmental waters.

Determination of sulfonamides in milk and egg samples by HPLC with mesoporous polymelamine-formaldehyde as magnetic solid-phase extraction adsorbent

In this work, magnetic mesoporous polymelamine-formaldehyde composites were synthesized via a facile Schiff base reaction. The magnetic mesoporous polymelamine-formaldehyde composites combined both the properties of mesoporous polymelamine-formaldehyde and the magnetism of NH₂ -SiO₂ @Fe₃ O₄ nanoparticles, possessing high specific surface area (150.66 m² g^-1 ) and good magnetism (24.50 emu g^-1 ). The magnetic mesoporous polymelamine-formaldehyde composites were employed as magnetic adsorbent for the extraction of sulfonamides. Under optimal conditions, good linearities with correlation coefficients higher than 0.9984 were obtained between peak area and sulfonamides concentration (2-200 μg L^-1 ) with limits of detection in the range of 0.33-0.58 μg L^-1 . The established method was successfully applied for the determination of sulfonamides in egg and milk samples. The adsorption mechanisms demonstrated that the adsorption of magnetic mesoporous polymelamine-formaldehyde composites toward sulfonamides was a multilayer process, and adsorption kinetics followed the pseudo-second-order model.

Solid-Phase Extraction of Aristolochic Acid I from Natural Plant Using Dual Ionic Liquid-Immobilized ZIF-67 as Sorbent

(1) Background: ZIF-67 is one of the most intriguing metal–organic frameworks already applied in liquid adsorption. To increase its adsorption performance, dual ionic liquids were immobilized on ZIF-67 in this research; (2) Methods: The obtained sorbent was used to adsorb aristolochic acid I (AAI) in standard solutions. Then, the sorbent was applied in solid-phase extraction to remove AAI from Fibraurea Recisa Pierre extracted solution. (3) Results: By analyzing the adsorption models, the highest adsorption capacity of immobilized sorbent (50.9 mg/g) was obtained at 25 °C within 120 min. In the SPE process, 0.02 mg of AAI was removed per gram of herbal plant, the adequate recoveries were in the range of 96.2–100.0%, and RSDs were 3.5–4.0%; (4) Conclusions: The provided experimental data revealed that ZIF-67@EIM-MIM was an excellent potential sorbent to adsorb and remove AAI from herbal plant extract, and the successful separation indicated that this sorbent could be an ideal material for the pretreatment of herbal plants containing AAI.