A systematic investigation of the effect of sample solvent on peak shape in nano- and microflow hydrophilic interaction liquid chromatography columns

Preparation and evaluation of a piperidinium-sulfonate based zwitterionic monolith for HILIC separation

In this study, a novel piperidinium-sulfonate based zwitterionic hydrophilic monolith was prepared through thermally initiated co-polymerization of a piperidinium-sulfonate monomer 3-(4-((methacryloyloxy)methyl)-1-methylpiperidin-1-ium-1-yl)propane-1-sulfonate (MAMMPS), and a hydrophilic crosslinker N,N'-methylenebisacrylamide (MBA) using n-propanol and H2O as porogenic system. Satisfactory mechanical and chemical stabilities, good repeatability and high column efficiency (120,000 N/m) were obtained on the optimal monolith. The resulting poly(MAMMPS-co-MBA) monolith showed a typical HILIC retention behavior over an ACN content range between 5 and 95 %. Furthermore, this column exhibited good separation performance for various polar compounds. Compared to quaternary ammonium-sulfonate based zwitterionic hydrophilic monolith, i.e. poly(N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl)ammonium betaine-co-MBA), the poly(MAMMPS-co-MBA) monolith displayed stronger retention and better selectivity for the tested phenolic and amine compounds at different pH conditions. Finally, this column was applied for the separation of six sulfonamide antibiotics, and the analytical characteristics of the method were evaluated in terms of precision, repeatability, limits of detection (LOD) and quantitation (LOQ). Overall, this study not only developed a novel HILIC monolithic column, but also proved the potential of piperidinium-sulfonate based zwitterionic chemistry as stationary phase, which further increased the structure diversity of zwitterionic HILIC stationary phases.

Optimization Strategies for Mass Spectrometry-Based Untargeted Metabolomics Analysis of Small Polar Molecules in Human Plasma

The untargeted approach to mass spectrometry-based metabolomics has a wide potential to investigate health and disease states, identify new biomarkers for diseases, and elucidate metabolic pathways. All this holds great promise for many applications in biological and chemical research. However, the complexity of instrumental parameters on advanced hybrid mass spectrometers can make the optimization of the analytical method immensely challenging. Here, we report a strategy to optimize the selected settings of a hydrophilic interaction liquid chromatography-tandem mass spectrometry method for untargeted metabolomics studies of human plasma, as a sample matrix. Specifically, we evaluated the effects of the reconstitution solvent in the sample preparation procedure, the injection volume employed, and different mass spectrometry-related operating parameters including mass range, the number of data-dependent fragmentation scans, collision energy mode, duration of dynamic exclusion time, and mass resolution settings on the metabolomics data quality and output. This study highlights key instrumental variables influencing the detection of metabolites along with suggested settings for the IQ-X tribrid system and proposes a new methodological framework to ensure increased metabolome coverage.

Managing sample introduction problems in hydrophilic interaction liquid chromatography

Sample injection can cause serious problems in hydrophilic interaction liquid chromatography (HILIC) when the injection solvent has higher elution strength than the mobile phase (mp). It can lead to asymmetric peak shapes and poor efficiency. The problem can occur when the mp contains a high proportion of organic e.g. 95% acetonitrile (a weak solvent) whereas the injection solvent contains a higher proportion of water (a strong solvent) that is necessary to dissolve polar samples. We investigated different strategies to overcome this problem. A simple method is pre-column dilution where the injector is programmed to deliver a plug of weak solvent (e.g. pure acetonitrile) along with the sample dissolved in a solvent with higher water content than the mp. Another option is to use alternative organic solvents to acetonitrile in the injection solvent, e.g. isopropanol, acetone or tetrahydrofuran, that may give enhanced sample solubility. The role of the volume of injection solvents was investigated as well as the possible effects of mass overload on the results. The use of small sample volumes is always recommended to reduce mismatch effects.

Efficient strategies for preparative separation of iridoid glycosides and flavonoid glycosides from Hedyotis diffusa

Efficient strategies for the preparative separation of iridoid glycosides and flavonoid glycosides from Hedyotis diffusa using preparative high-performance liquid chromatography combined with appropriate pretreatment technologies were developed. Four fractions (Fr.1-1, Fr.1-2, Fr.1-3, and Fr.2-1) were firstly isolated from the crude extract of Hedyotis diffusa by column chromatography with C18, resin, and silica gel materials, respectively. Then, corresponding separation strategies were developed according to the polarity and chemical constituents. High-polar compounds of Fr.1-1 were purified by hydrophilic reversed-phase liquid chromatography and hydrophilic interaction liquid chromatography mode. The combination of C18 and phenyl columns realized the complementary separation of iridoid glycosides in Fr.1-2. Meanwhile, the improved selectivity caused by the change of organic solvent in the mobile phase was utilized to realize the purification of flavonoid glycosides in Fr.1-3 and Fr. 2-1. Finally, 27 compounds (purity > 95%) mainly involving nine iridoid glycosides and five flavonoid glycosides were obtained. A complete strategy was established for the separation of a complex sample with a wide polarity range, to jointly solve the problems of enrichment of target components and separation of structural analogs.

Quantification of a Sulfated Marine-Inspired Antifouling Compound in Several Aqueous Matrices: Biodegradation Studies and Leaching Assays from Polydimethylsiloxane Coatings

The development of marine-inspired compounds as non-toxic antifouling (AF) agents has been pursued in the last years. Sulfur is the third most common element in seawater. Sulfur is present in oxygenated seawater as sulfate anion (SO₄²⁻), which is the most stable combination of sulfur in seawater, and several promising AF secondary metabolites with sulfate groups have been described. However, sulfated compounds proved to be an analytical challenge to quantify by HPLC. Taking these facts into consideration, this work presents the development and validation of a method for the quantification of gallic acid persulfate (GAP) in seawater and ultrapure water matrix, based on hydrophilic interaction liquid chromatography (HILIC). This method was used to evaluate GAP stability following several abiotic and biotic degradation assays, and to quantify its release in seawater from room-temperature-vulcanizing polydimethylsiloxane commercial coating. GAP was very stable in several water matrices, even at different pH values and in the presence/absence of marine microorganisms and presented a leaching value lower than 0.5%. This work discloses HILIC as an analytical method to overcome the difficulties in quantifying sulfated compounds in water matrices and highlights the potential of GAP as a promising long-lasting coating.