Pseudo-template molecularly imprinted polymeric fiber solid-phase microextraction coupled to gas chromatography for ultrasensitive determination of 2,4,6-trihalophenol disinfection by-products

Development of a Novel SPME Coating for Efficient Extraction of Organochlorine Pesticides in Liquid Dairy Products

A sensitive and accurate analysis of organochlorine pesticide (OCP) residues in dairy products poses a significant challenge. Herein, a novel covalent organic polymer, Azo-COP-1, was synthesized for the enhanced extraction of OCPs in dairy products. The solid phase microextraction fiber coated with Azo-COP-1 demonstrated excellent extraction performance for the OCPs via hydrogen bonding, halogen bonding, π-π stacking, and electrostatic interactions. Coupled with gas chromatography-electron capture detection, we developed a facile and reliable method for detecting OCPs in six types of dairy products with low limits of detection (2.0-400 pg g-1) and high method recoveries (82.6-113%). Azo-COP-1 coatings exhibited good stability and durability. The results verified the feasibility of using Azo-COP-1-based SPME to extract OCP residues in dairy product samples, highlighting its potential for routine monitoring of pesticide residues and food safety assessments.

Preparation of MIL-101(Cr)-NH2@TAPB-DVA-COF based membrane solid-phase extraction for efficient enrichment and sensitive determination of trace aromatic disinfection by-products in juice drinks

Aromatic disinfection by-products (DBPs) have garnered considerable interest in recent years for their potential carcinogenicity. However, efficient separation and enrichment of DBPs in complex samples is a challenge due to the extremely low content of aromatic DBPs and the complexity of sample matrices. In this study, a MIL-101(Cr)-NH2@TAPB-DVA-COF hybrid material was prepared as the enrichment medium of membrane solid-phase extraction (M-SPE) to efficiently determine trace emerging aromatic DBPs. This medium exhibited excellent enrichment capacity and selectivity for aromatic DBPs because of the strong hydrogen bonding, π-π stacking and hydrophobic interactions. An efficient analytical method for five aromatic DBPs in juice drinks was successfully established by use of this hybrid material as the enrichment medium for M-SPE in combination with liquid chromatography tandem mass spectrometry (LC-MS/MS). The limits of detection of the established method were from 0.50 to 3.00 ng/L. Moreover, the method had been successfully used in real juice drinks to determine trace five aromatic DBPs with the spiked recoveries ranging from 84.1% to 125%. The method possessed high analytical sensitivity and accuracy for these five aromatic DBPs in juice drinks with the aid of the efficient M-SPE technology proposed.

Molecularly imprinted polymers and porous organic frameworks based analytical methods for disinfection by-products in water and wastewater

Disinfection by-products (DBPs) with heritage toxicity, mutagenicity and carcinogenicity are one kind of important new pollutants, and their detection and removal in water and wastewater has become a common challenge facing mankind. Advanced functional materials with ideal selectivity, adsorption capacity and regeneration capacity provide hope for the determination of DBPs with low concentration levels and inherent molecular structural similarity. Among them, molecularly imprinted polymers (MIPs) are favored, owing to their predictable structure, specific recognition and wide applicability. Also, metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs) with unique pore structure, large specific surface area and easy functionalization, attract increasing interest. Herein, we review recent advances in analytical methods based on the above-mentioned three functional materials for DBPs in water and wastewater. Firstly, MIPs, MOFs and COFs are briefly introduced. Secondly, MIPs, MOFs and COFs as extractants, recognition element and adsorbents, are comprehensively discussed. Combining the latest research progress of solid-phase extraction (SPE), sensor, adsorption and nanofiltration, typical examples on MIPs and MOFs/COFs based analytical and removal applications in water and wastewater are summarized. Finally, the application prospects and challenges of the three functional materials in DBPs analysis are proposed to promote the development of corresponding analytical methods.

A new copper nanocluster surface molecular imprinted polymethacrylic acid probe for ultratrace trichlorophenol based on in situ-generated nanogold SPR effects

A new coinage metal nanocluster surface molecularly imprinted polymethacrylic acid nanoprobe (NC@MIP) for the selective determination of 2,4,6-trichlorophenol (TCP) was prepared via microwave synthesis using 2,4,6-trichlorophenol as a template molecule, copper nanoclusters (CuNC) as a nanosubstrate, and methacrylic acid as a polymer monomer. It was found that the copper nanocluster MIP (CuNC@MIP) shows the strongest catalytic performance for the reduction of HAuCl4 by hydrazine hydrate for the on-site generation of gold nanoparticles (AuNPs) with the surface plasmon resonance (SPR) effects of resonance surface-enhanced Raman scattering (SERS) and resonance Rayleigh scattering (RRS) as well as absorption (Abs). When TCP was added, the CuNC@MIP nanoprobe and TCP-formed CuNC@MIP-TCP nanoenzyme with stronger catalytic activity generated more AuNPs, and the trimodal analytical signal was enhanced linearly. Therefore, a new SERS/RRS/Abs trimodal sensing platform for TCP was constructed, which was simple, rapid, sensitive, and selective. For each mode, the linear ranges were 0.0075-0.075, 0.010-0.10, and 0.010-0.10 nmol L-1, and the detection limits were 0.0010, 0.021, and 0.043 nmol L-1, respectively. The relative deviation of TCP in different water quality was 0.47%-2.5% and the recovery rate was 94.6%-108.6%.

Molecularly imprinted polymer sheathed mesoporous silica tube as SPME fiber coating for determination of tobacco-specific nitrosamines in water

Tobacco-specific nitrosamines (TSNAs) are probably carcinogenic disinfection byproducts eliciting health risk concerns. The determination and surveillance of TSNAs in water is still cumbersome due to the lack of advanced sample preparation methods. Herein, we prepared a solid phase microextraction (SPME) fiber coated with the molecularly imprinted polymer (MIP) sheathed mesoporous silica tube (MST) composite material, and developed a highly efficient, selective, and sensitive method for the determination of five TSNAs in water. Benefiting from the TSNAs-specific recognition of MIP and the increased specific surface area derived from MST, the MIP@MST fiber exhibited excellent extraction performance for TSNAs, which was much superior to the commercially available SPME fibers. By coupling to high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), the outstanding analytical merits such as low method detection limits (ranging 0.1-6.7 ng L-1) and good reproducibility (intra-fiber and inter-fiber relative standard deviations ranging 4.1 %-11.6 % and 3.5 %-12.2 %, respectively) were achieved with the consumption of 8 mL water sample and 100 μL methanol solvent in 50 min. The feasibility of the SPME-HPLC-MS/MS method was demonstrated in tap water and chloraminated source water, with relative recoveries for the five TSNAs ranging from 85.2 % to 108.5 %. In result, none of the TSNAs were found in the tap water samples, while 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) and 4-(methylnitrosamino)-1-(3-pyridyl)-1-Butanol (NNAL) were detected in the chloraminated source water samples. The rapid and convenient SPME-HPLC-MS/MS method developed in this study offers a powerful tool for monitoring TSNAs in water.

Traditional methods and biosensors for detecting disinfection by-products in water: A review

In recent years, pollution caused by disinfection by-products (DBPs) has become a global concern. Initially, there were fewer contaminants, and the mechanism of their generation was unclear; however, the number of contaminants has increased exponentially as a result of rapid industrialization and numerous economic activities (e.q., during the outbreak of COVID-19 a surge in the use of chlorinated disinfectants was observed). DBP toxicity results in various adverse health effects and organ failure in humans. In addition, it profoundly affects other forms of life, including animals, plants, and microorganisms. This review comprehensively discusses the pre-treatment methods of traditional and emerging DBPs and the technologies applied for their detection. Additionally, this paper provides a detailed discussion of the principles, applicability, and characteristics of traditional large-scale instrumentation methods (such as gas/liquid/ion chromatography coupled with mass spectrometry) for detecting DBPs based on their respective detection techniques. At the same time, the design, functionality, classification, and characteristics of rapid detection technologies (such as biosensors) are also detailed and analyzed.

Synthesis of phosphate-functionalized magnetic porous organic polymer: A sorbent for sensitive determination of neonicotinoid insecticides in water and lemon juice

There is an urgent need to prepare advanced functional materials for extraction and enrichment of trace organic pollutants from different samples. In this work, two novel phosphate-functionalized porous organic polymers (DBP-POP and DPP-POP) were synthesized for the first time. Compared with phosphate-free counterpart, both phosphate-functionalized POPs showed excellent adsorption performance for the neonicotinoids due to the hydrogen bonding, π-π interaction and hydrophobic interaction. For ease of separating the sorbent from solution, magnetic DBP-POP (M-DBP-POP) was further prepared as sorbent to extract neonicotinoids from environmental water and lemon juice samples prior to their determination by high performance liquid chromatography-ultraviolet detection. Under optimal conditions, the detection limits (S/N = 3) of the method were 0.01-0.08 ng mL-1 for water and 0.03-0.10 ng mL-1 for lemon juice. The recoveries were in the range of 80.0% to 113.0% with relative standard deviation less than 10.6%. This work demonstrated the feasibility of phosphate-functionalized POPs for adsorption applications.

Development of a specific and sensitive method for the detection of glyphosate pesticide and its metabolite in tea using dummy molecularly imprinted solid-phase extraction coupled with liquid chromatography-tandem quadrupole mass spectrometry

Glyphosate, a widely used herbicide, and its primary metabolite aminomethyl phosphonic acid have been found to cause environmental and ecological issues and threaten human health. The conventional pretreatment method was insufficient for the extraction, concentration, and enrichment of trace substances, resulting in poor specificity. Thus, our objective was to develop a method for glyphosate pesticide detection using dummy molecularly imprinted solid-phase extraction (DMI-SPE) combined with liquid chromatography-tandem quadrupole mass spectrometry (DMI-SPE-LC/MS/MS). The sol-gel method was used to prepare the molecularly imprinted material, using glyphosine as the dummy template molecule, to achieve specific adsorption to glyphosate and reduce costs. The optimized polymerization conditions achieved maximum adsorption of 28.6 µg/mg glyphosate by the molecularly imprinted material. The established DMI-SPE-LC/MS/MS method was used to detect glyphosate and its metabolite (aminomethyl)phosphonic acid in tea. The concentration ranges of glyphosate and (aminomethyl)phosphonic acid (from 0.05 to 4 µg/mL) were linear with correlation coefficients of 0.999 and 0.991, respectively. The recoveries of (aminomethyl)phosphonic acid at three spiked levels ranged from 79.95% to 83.74%, with RSDs between 6.40% and 7.45%, while the recoveries of glyphosate ranged from 98.69% to 106.26%, with RSDs between 0.91% and 1.18%. Our results demonstrate that the developed DMI-SPE-LC/MS/MS method achieves high sensitivity and specific detection of glyphosate and its metabolite (aminomethyl)phosphonic acid in tea matrices.

A Zn-based metal coordination cluster Zn5 used for solid phase microextraction of ten phenolic compounds from water and soil

Exploring coating materials with superior extraction efficiency has always been the pursuit in the field of solid phase microextraction (SPME). Metal coordination clusters with high thermal and chemical stability, abundant functional groups as active adsorption site are the promising coatings. In the study, a Zn₅(H₂Lⁿ)₆(NO₃)₄ (Zn₅, H₃Lⁿ =(1,2-bis-(benzo[d]imidazol-2-yl)-ethenol) cluster coating was prepared and applied for SPME of ten phenols. Zn₅ based SPME fiber exhibited high extraction efficiencies for phenols in headspace (HS) mode, which circumvented the pollution of SPME fiber. The adsorption isotherm and theoretical calculation indicated the adsorption mechanism of phenols on Zn₅ was hydrophobic interaction, H-bond interaction and π-π stacking. Under the optimized extraction conditions, an HS-SPME-GC-MS/MS method was developed for the determination of ten phenols in water and soil samples. For ten phenolic compounds in water and soil samples, the linear ranges were 0.5-5000 ng/L and 0.5-250 ng/g, respectively. The limits of detection (LODs, S/N = 3) were 0.010-1.20 ng/L and 0.0048-0.16 ng/g, respectively. The precisions of single fiber and fiber-to-fiber were lower than 9.0% and 14.1%, respectively. The proposed method was applied for the detection of ten phenolic compounds in various water and soil samples, showing satisfactory recovery (72.1-118.8%). This study delivered a novel and efficient SPME coating material for the extraction of phenols.