Advances of 3D graphene and its composites in the field of microwave absorption

Challenges and future prospects of the 2D material-based composites for microwave absorption

The widespread use of electronic devices inevitably brings about the problem of electromagnetic pollution. As a result, it is important and urgent to develop efficient absorbing materials to alleviate increasing pollution issues. Recently, two-dimensional (2D) material-based microwave absorbers have attracted wide attention in microwave absorption due to their unique lamellar structure, large specific surface area, low density, good thermal and chemical stability. Through various modulation strategies such as structure configuration, pore/defect engineering, heteroatom doping and coupling of functional materials, 2D materials or 2D material-based composites exhibit excellent microwave absorption performance. In this review, the absorption mechanism is firstly introduced and then the latest progress in 2D material-based microwave absorbers is reviewed in depth. The challenges and future prospects for graphene, h-BN, and MXene-based microwave absorbers are discussed in the final part. This timely review aims to provide guidance or stimulation to develop advanced multifunctional 2D material-based microwave absorbers in this rapidly blossoming field.

Flexible graphene/PAM/PVA hydrogel composites with highly dispersed cobalt nanoparticles for enhanced microwave absorption

With the increasing demand for flexible microwave-absorbing materials (MAMs), it is necessary to ensure a continuous network of MAM fillers. However, it is still a great challenge to achieve uniform loading of magnetic nanoparticles because of the uncertain reaction sites of graphene. For this research, we adopted a high-pressure homogenization strategy to realize a uniform distribution of Co nanoparticles on the graphene surface via polyethyleneimine (PEI) modification. Transferring the Co reaction sites from the randomly distributed oxygen functional groups to the uniformly distributed PEI molecules, the homogeneous graphene oxide (GO)/PEI/Co (GP/Co) dispersion ensured to form the uniform reduced graphene oxide (RGO)/PEI/Co (RGP/Co) after reduction. RGP/Co-2 achieved an effective absorption of -51.9 dB in the C band and a microwave absorption bandwidth of 5.84 GHz. In addition, RGP/Co-2 was filled into polyacrylamide/polyvinyl alcohol (PAM/PVA) hydrogel to construct a uniform and continuous network structure, and RGP/Co-2/PAM/PVA flexible MAMs were prepared. The minimum reflection loss (RLmin) is -41.5 dB under the thickness of 2.5 mm and shows excellent mechanical flexibility. In addition, RGP/Co-2/PAM/PVA exhibited excellent sensing performance. This research supplied a new perspective for the development of MAMs in flexible electronics.

A Self-foaming Strategy to Construct Small Mo2C Nanoparticles Decorated 3D Carbon Foams as Superior Electromagnetic Wave Absorbing Materials with Strong Corrosion Resistance

3D macroporous carbon-based foams are always considered as promising candidates for high-performance electromagnetic (EM) wave absorbing materials due to the collaborative EM contribution and salutary structure effect. However, the uneven distribution of heterogeneous EM components and the cumbersome preparation process have become key issues to hinder their performance improvement and practical popularity. Herein, the fabrication of 3D carbon foam decorated with small and highly dispersed Mo2C nanoparticles is realized by an innovative self-foaming strategy. The foaming mechanism can be attributed to the decomposition of nitrate during the softening process of organic polymers. The good dispersion of Mo2C nanoparticles boosts interfacial polarization significantly. After regulating the content of Mo2C nanoparticles, the optimal Mo2C/CF-x exhibits good EM absorption performance, whose minimum reflection loss intensity value can reach up to -72.2 dB, and effective absorption bandwidth covers 6.7 GHz with a thickness of 2.30 mm. Very importantly, the resultant Mo2C/CF-x exhibits hydrophobicity and strong acidic anticorrosion, and a long-time treatment in HCl solution (6.0 mol L-1) produces negligible impacts on their EM functions. It is believed that this extraordinary feature may render Mo2C/C foams as qualified and durable EM wave absorbing materials (EWAMs) under rigorous conditions.

Three-Dimensionally Printed K-Band Radar Stealth Lightweight Material with Lotus Leaf Structure

K-band radar waves have high penetration and low attenuation coefficients. However, the wavelength of this radar wave is relatively short; thus, designing and preparing both broadband and wide-angle radar wave absorbers in this band presents considerable challenges. In this study, a resin-based K-band radar wave absorber with a biomimetic lotus leaf structure was designed and formed by UV curing. Here, microscale lotus leaf papillae and antireflection structures were prepared using a DLP 3D printer, and the contact angle between the material and water droplets was increased from 56° to 130°. In addition, the influence of the geometric parameters of the lotus leaf antireflection structure on the electromagnetic absorption performance and mechanical strength was investigated. After simulation optimization, the maximum electromagnetic loss of the lotus leaf structure 3D-printed sample was -32.3 dB, and the electromagnetic loss was below -10 dB in the 20.8-26.5 GHz frequency range. When the radar incidence angle was 60°, the maximum electromagnetic loss was still less than -10 dB. The designed lotus leaf structure has a higher mechanical energy absorption per unit volume (337.22 KJ/m3) and per unit mass (0.55 KJ/Kg) than commonly used honeycomb lightweight structures during the elastic deformation stage, and we expect that the designed structure can be used as an effective lightweight material for K-band radar stealth.

Customized Pore Creation Strategies for Hyperelastic, Robust, Insulating Multifunctional MXene Aerogels for Microwave Absorption

The construction of heterogeneous microstructure and the selection of multicomponents have turned into a research hotspot in developing ultralight, multifunctional, high-efficiency electromagnetic wave absorbing (EMA) materials. Although aerogels are promising materials to fulfill the above requirements, the increase in functional fillers inevitably leads to the deterioration of intrinsic properties. Tuning the electromagnetic properties from the structural design point of view remains a difficult challenge. Herein, we design customized pore creation strategies via introducing sacrificial templates to optimize the conductive path and construct the discontinuous dielectric medium, increasing dielectric loss and achieving efficient microwave absorption properties. A 3D porous composite (MEM) was crafted, which encapsulated an EVA/FeCoNi (EVA/MNPs) framework with Ti3C2Tx MXene coating by employing a direct heated cross-linking and immersion method. Controllable adjustment of the conductive network inside the porous structure and regulation of the dielectric character are achieved by porosity variation. Eventually, the MEM-5 with a porosity of 66.67% realizes RLmin of -39.2 dB (2.2 mm) and can cover the entire X band. Moreover, through off-axis electronic holography and the calculation of conduction loss and polarization loss, the dielectric property is deeply investigated, and the inner mechanism of optimization is pointed out. Thanks to the inherent characteristic of EVA and the porous structure, MEM-5 showed excellent thermal insulating and superior compressibility, which can maintain 60 °C on a 90-100 °C continuous heating stage and reached a maximum compressive strength of 60.12 kPa at 50% strain. Conceivably, this work provides a facile method for the fabrication of highly efficient microwave absorbers applied under complex conditions.

Metal-Catalyzed Carbon Foams Synthesized from Glucose as Highly Efficient Electromagnetic Absorbers

This paper introduces a novel method for preparing high-performance, metal-containing carbon foam wave-absorbing materials. The process involves foaming glucose through catalysis by transition metals followed by high-temperature pyrolysis. The resulting carbon foam materials exhibit a highly porous structure, which is essential for their wave-absorption properties. Notably, at a thickness of 2.0 mm, the glucose-derived carbon foam composite catalyzed by Fe and Co (GCF-CoFe) achieved a minimum reflection loss (RLmin) of -51.4 dB at 15.11 GHz, along with an effective absorption bandwidth (EAB) of 5.20 GHz, spanning from 12.80 GHz to 18.00 GHz. These impressive performance metrics indicate that this approach offers a promising pathway for developing low-density, efficient carbon foam materials for wave-absorption applications. This advancement has significant implications for fields requiring effective electromagnetic interference (EMI) shielding, stealth technology, and other related applications, potentially leading to more efficient and lightweight solutions.

Enhanced microwave absorption properties of conducting polymer@graphene composite to counteract electromagnetic radiation pollution: green EMI shielding

Conducting polymers have been thoroughly investigated and found to have extensive applications in the fields of microwave absorption and electromagnetic (EM) shielding owing to their distinctive characteristics and adaptability. In the present work, conducting polymer (PEDOT and polyaniline) and graphene composites were prepared via an in situ chemical polymerization technique. Further, these composite materials were characterized to determine their potential to address the issue of EM radiation pollution in the microwave frequency (12.4 GHz to 18 GHz). The PEDOT/graphene composites exhibited significant shielding effectiveness of up to 46.53 dB, achieving a green index (gs) of 1.17. Also, absorption was observed to be the dominant shielding mechanism in all the samples owing to significant dielectric losses (ε''/ε' ≈ 1.9-3.1) and microwave conductivity (σs = 19.9-73.6 S m-1) in the samples at 18 GHz. Both dielectric loss and conduction loss occurred because of the strong interactions involving polarization, charge propagation, and the creation of conductive routes through the incorporation of graphene in the polymer matrix. These properties/shielding results indicate the potential of the composites to be used as lightweight EM shielding materials. These materials are suitable shield materials for electronic devices to protect them from harmful electromagnetic radiation, making them vital in various applications.

Synergetic dielectric and magnetic losses of melamine sponge-loaded puffed-rice biomass carbon and Ni3ZnC0.7 for optimal effective microwave absorption

Multi-dimensional design and the combination of multiple phases can effectively enhance the dielectric loss properties and multiple reflection effects of absorbers. Herein, a novel multi-dimensional microporous nanostructured composite, melamine sponge (MS) loaded puffed-rice biomass carbon (C) together with bimetallic carbide material Ni3ZnC0.7 (Ni3ZnC0.7-MS/C) was synthesized by simple vacuum filtration and hydrothermal calcination. The result indicates that small Ni3ZnC0.7 particles with little Ni doping uniformly decorated on the surfaces of the three-dimensional (3D) melamine sponge and puffed rice carbons. The Ni3ZnC0.7-MS/C composite mixed with paraffin (weight ratio of 1:2) exhibited the best electromagnetic wave (EMW) absorption performance, and the minimum reflection loss (RLmin) value of the Ni3ZnC0.7-MS/C composite reaches -107.7 dB with a matching thickness of 2.78 mm and the maximum effective absorption bandwidth for RL below -10 dB (EABmax) is adjusted to 9.2 GHz at a matching thickness of 4.0 mm. The dipole polarization effect of the N doping and the different interfaces provided by the 3D structure of the MS carbon enhance the conduction loss and interface polarization, while the positive effects of eddy current and resonance caused by Ni3ZnC0.7 effectively improve the microwave absorption performances. This melamine sponge-loaded bimetallic carbon composite exhibited a magnetic/dielectric loss combination, resulting in a high-performance absorber with lightweight, cost-effective and efficient properties.

Large Microsphere Structure of a Co/C Composite Derived from Co-MOF with Excellent Wideband Electromagnetic Microwave Absorption Performance

In the field of electromagnetic wave (EMW) absorption, carbon matrix materials based on metal-organic frameworks (MOFs) have drawn more interest as a result of their outstanding advantages, such as porous structure, lightweight, controlled morphology, etc. However, how to broaden the effective absorption bandwidth [EAB; reflection loss (RL) ≤ -10 dB] is still a challenge. In this paper, large microsphere structures of a Co/C composite composed of small particle clusters were successfully prepared by the solvothermal method and annealing treatment. At a filling ratio of 40 wt %, the Co/C composite shows attractive microwave absorption (MA) performance after being annealed at 600 °C in an atmosphere of argon. With an EAB of 6.32 GHz (9.92-16.24 GHz) and a thickness of just 2.57 mm, the minimum RL can be attained at -54.55 dB. Most importantly, the EAB can attain 7.12 GHz (10.88-18.0 GHz) when the thickness is 2.38 mm, which is larger than that of the majority of MOF-derived composites. The superior MA performance is strongly related to excellent impedance matching and a higher attenuation constant. This study provides a simple strategy for synthesizing a MOF-derived Co/C composite with a wide EAB.

Research progress and future perspectives on electromagnetic wave absorption of fibrous materials

Electromagnetic waves have caused great harm to military safety, high-frequency electronic components, and precision instruments, and so forth, which urgently requires the development of lightweight, high-efficiency, broadband electromagnetic waves (EMW) absorbing materials for protection. As the basic fibrous materials, carbon fibers (CFs) and SiC fibers (SiCf) have been widely applied in EMW absorption due to their intrinsic characteristics of low density, high mechanical properties, high conductivity, and dielectric loss mechanism. Nevertheless, it has remained a great challenge to develop lightweight EMW-absorbing fibrous materials with strong absorption capability and broad frequency range. In this review, the fundamental electromagnetic attenuation mechanisms are firstly introduced. Furthermore, the preparation, structure, morphology, and absorbing performance of CFs and SiCf-based EMW absorbing composites are summarized. In addition, prospective research opportunities are highlighted toward the development of fibrous absorbing materials with the excellent absorption performance.

Preparation of MoS2/MXene/NC Porous Composite Microspheres with Wrinkled Surface and Their Microwave Absorption Performances

In this paper, a MoS2/MXene/N-doped carbon (NC) porous composite microsphere with a wrinkled surface was designed and constructed. Lithium fluoride exfoliation and lithium-ion etching fabricated two types of 2D assembly elements, MXene (Ti3C2Tx) and MoS2 nanosheets. The two nanosheets were self-assembled by an ultrasonic spray technique with high-temperature reduction, and MoS2/MXene microspheres with 3Dwrinkled shapes were obtained. The coating of the surface NC layer was achieved by the carbonization of a polydopamine (PDA) precursor formed by the self-polymerization of dopamine. The amount of PDA coating and raw material ratio significantly affect the microstructure and electromagnetic wave absorption performance. The optimal MXene to MoS2 mass ratio is 5:1, and the optimal coating time and filler amount are 8 h and 40%. MoS2/MXene/NC composite microspheres exhibit excellent absorption performance with low reflection losses (RLmin) of -52.9 dB at 6.4 GHz and high adequate absorption bandwidths of 5.2 GHz. By adjusting the thickness of the absorber, the full coverage of the C-Ku band (4-18 GHz) can be achieved. As a new composite absorber, it has significant potential applications.

Construction and application of carbon aerogels in microwave absorption

Electromagnetic pollution that threatens human health, the ecological environment and electronic equipment has been recognized as a serious environmental issue. In view of this, microwave absorbing materials (MAMs) are urgently required in modern society. Compared with traditional MAMs, carbon aerogels have inherent advantages in microwave absorption because of their high porosity and controllable conductive networks. Moreover, they are self-supporting 3D architectures with tailorable shapes, which satisfy most application scenarios. Therefore, carbon aerogels have aroused great interest in recent years and are being developed as promising absorption materials. In this review, we emphasize recent developments in carbon-aerogel-based MAMs constructed with some typical carbon nanomaterials, including graphene, carbon nanotubes and pyrolytic carbon. Their preparation methods, especially some newly developed strategies, are introduced as well as their influence on the structures and properties of aerogels. With a brief analysis of classic microwave absorption processes, we propose the requirements and strategies for modifying carbon aerogels to achieve ideal microwave absorption performance. Finally, we provide comprehensive comparisons of the MA performances of various carbon aerogels that show application potential and set forth the challenges and prospects of this kind of MAM.

CoFe2O4 Nanoparticles Grown within Porous Al2O3 and Immobilized on Graphene Nanosheets: A Hierarchical Nanocomposite for Broadband Microwave Absorption

Demands to develop efficient microwave-absorbing materials are increasing with the advancement of information technology and the exponential rise in the usage of electromagnetic devices. To reduce electromagnetic interference and to overcome the adverse effects caused by microwave exposure resulting from the excessive usage of electromagnetic devices, microwave absorbers are very necessary. In addition, radar-absorbing materials are essential for stealth technology in military applications. Herein, we report a nanocomposite in which CoFe₂O₄ (CF) nanoparticles were grown within the porous structure of Al₂O₃ (PA), and this CoFe₂O₄-loaded Al₂O₃ (PA-CF) nanocomposite was immobilized on the surface of nanometer-thin graphene sheets (Gr). Owing to the hierarchical structure created by the constituents, the (60PA-40CF)₉₀-Gr₁₀ nanocomposite exhibited excellent microwave-absorption properties in the X-band region with a reflection loss (RL) value of ∼-30.68 dB (∼99.9% absorption) at 10.71 and 9.04 GHz when thicknesses were 2.0 and 2.3 mm, respectively. This nanocomposite demonstrated its competence as a lightweight, high-performance microwave absorber in the X-band region, which can be utilized in the applications of pioneering stealth technology.

Dielectric Loss Mechanism in Electromagnetic Wave Absorbing Materials

Electromagnetic (EM) wave absorbing materials play an increasingly important role in modern society for their multi-functional in military stealth and incoming 5G smart era. Dielectric loss EM wave absorbers and underlying loss mechanism investigation are of great significance to unveil EM wave attenuation behaviors of materials and guide novel dielectric loss materials design. However, current researches focus more on materials synthesis rather than in-depth mechanism study. Herein, comprehensive views toward dielectric loss mechanisms including interfacial polarization, dipolar polarization, conductive loss, and defect-induced polarization are provided. Particularly, some misunderstandings and ambiguous concepts for each mechanism are highlighted. Besides, in-depth dielectric loss study and novel dielectric loss mechanisms are emphasized. Moreover, new dielectric loss mechanism regulation strategies instead of regular components compositing are summarized to provide inspiring thoughts toward simple and effective EM wave attenuation behavior modulation.

Synthesis of hollow core-shell ZnFe2O4@C nanospheres with excellent microwave absorption properties

The special hollow core-shell structure and excellent dielectric-magnetic loss synergy of composite materials are two crucial factors that have an important influence on the microwave absorption properties. In this study, hollow ZnFe2O4 nanospheres were successfully synthesized by a solvothermal precipitation method firstly; based on this, a C shell precursor phenolic resin was coated on the ZnFe2O4 hollow nanospheres' surface by an in situ oxidative polymerization method, and then ZnFe2O4@C was obtained by high-temperature calcination. Samples were characterized by SEM, TEM, XRD, XPS, BET, VSM, VNA. The results show that the maximum reflection loss (RLmax) reaches -50.97 dB at 8.0 GHz, and the effective bandwidth (EAB) of hollow core-shell structure ZnFe2O4@C is 3.2 GHz (6.16-9.36 GHz) with a coating thickness of 3.5 mm. This work provides a useful method for the design of lightweight and high-efficiency microwave absorbers.

Ultralight MOF-Derived Ni3S2@N, S-Codoped Graphene Aerogels for High-Performance Microwave Absorption

To develop high-performance microwave absorption materials with the features of lightweight, thin thickness, broad bandwidth, and strong absorption, an ultralight Ni₃S₂@N, S-codoped graphene aerogel with a density of 13.5 mg/cm³ has been fabricated by the use of metal-organic frameworks (MOFs) to directly initiate the gelation of graphene oxide strategy. In such a strategy, dual-functional 1D Ni-MOF nanorods not only act as the gelation agent but also afford the doping elements (N and S) originated from the organic species and the precursor for metal sulfide. Due to the synergistic effects of good impedance matching and multiple losses, the optimal reflection loss (RL) of as-prepared Ni₃S₂@N, S-codoped graphene aerogel reaches −46.9 dB at 17.1 GHz with only 2.0 mm and ultralow filling content (1.75 wt%). The maximum effective absorption bandwidth (EAB) reaches 6.3 GHz (11.7–18.0 GHz) at 2.38 mm, covering the whole Ku band. Moreover, the value of EAB with the RL less than −30 dB can be tuned to 12.2 GHz (5.8–18 GHz) at the absorber thickness ranging from 1.9 to 5.0 mm. This work provides insight for rational design and fabrication of multicomponent-containing graphene aerogels, showing the potential application in lightweight and high-performance microwave absorption.

Hierarchical HCF@NC/Co Derived from Hollow Loofah Fiber Anchored with Metal-Organic Frameworks for Highly Efficient Microwave Absorption

Hierarchical electromagnetic wave (EMW) absorption materials with a dielectric-magnetic dual-loss mechanism are promising candidates for highly efficient EMW attenuation. Herein, hierarchical dielectric-magnetic composite hollow carbon fiber@nitrogen-doped carbon/Co (HCF@NC/Co) was successfully synthesized via in situ growth of two-dimensional (2D) Co metal-organic framework (MOF) (ZIF-67) nanosheets on the surface of hollow loofah fiber (HLF), followed by a calcination process, where the aggregation of carbonized MOFs was effectively avoided to construct a homogeneous hierarchical one-dimensional structure. Based on the advantages of the carbon/Co dielectric-magnetic dual-loss mechanism that results in good impedance matching and multiple polarization loss arising from the extensive heterointerfaces (e.g., HCF-NC/Co, air-carbon, nitrogen-carbon, and Co-carbon interfaces), dipole active sites (e.g., doped N, Co particle, and crystalline defects in graphitic carbon), and hierarchical porous structures, optimal EMW absorption performance of HCF@NC/Co is achieved through regulating the calcination temperature and filler content, where the HCF@NC/Co calcinated at 700 °C exhibits a minimum reflection loss (RL_min) value of -50.14 dB with only 14% filler loading and 2.25 mm thickness, and the maximum effective absorption bandwidth (EAB_max) also reaches 7.36 GHz. Meanwhile, adjustable EAB can also be achieved by optimizing the sample thickness, making it applicable in a wider frequency region. It is expected that our prepared HCF@NC/Co might shed light on designing lightweight and highly efficient EMW MOF-derived EMW absorbing materials.

Core-shell CoFe2O4@C nanoparticles coupled with rGO for strong wideband microwave absorption

Strong absorption and large bandwidth are two contributors to materials' absorbing performance. In this work, a series of multi-element core-shell magnetic nano-particle composite layered graphene absorbing materials CoFe₂O₄@C/rGO (CCr) were prepared by adjusting carbon shell thickness. The CCr at a low thickness achieved strong microwave absorption and a wide effective absorption bandwidth. Not only the core-shell structure of the magnetic nanoparticle CoFe₂O₄@C (CFO@C) increases the interface loss, but both the coating carbon shell and the core CoFe₂O₄ (CFO) are beneficial to improve impedance matching. Due to the synergistic effect of the dielectric and magnetic properties of graphene and ferrite, CCr possessed high absorption performance, and its minimum reflection loss reached (R_Lmin) -52.5 dB when the thickness was only 2 mm. At the same time, the effective absorption bandwidth (EAB) was 5.68 GHz when the thickness was only 1.7 mm. The chemically stable core-shell dielectric nanocomposite provided a new solution for preparing materials with excellent chemical structure and high absorbing properties.

3D and 4D printing: From innovation to evolution

The world and science are moving forward nonstop. Every day, we see novel technologies that are coming to improve life quality. One of them is 3D printing or additive manufacturing. This technology covers the shortage of the current manufacturing technologies, and it has been enhanced by introducing smart materials like smart polymers as feed. The following product can adapt to circumstance conditions such as temperature changes, compression alteration, etc. These responses resulted in an advanced 3D printing technology called 4D printing. 3D and 4D printing technologies found their applications in all areas and industry sizes, from home-scale to large-scale industries. Regardless of all advantages of these technologies, there are still some shortages like low printing speed. But this never stops their progression and promotion. In this review, we aimed to cover general knowledge about 3D and 4D printing and their recent applications in various fields.

Multifunctional Magnetic Ti3C2Tx MXene/Graphene Aerogel with Superior Electromagnetic Wave Absorption Performance

Ingenious microstructure design and a suitable multicomponent strategy are still challenging for advanced electromagnetic wave absorbing (EMA) materials with strong absorption and a broad effective absorption bandwidth (EAB) at thin sample thickness and low filling level. Herein, a three-dimensional (3D) dielectric Ti₃C₂T_x MXene/reduced graphene oxide (RGO) aerogel anchored with magnetic Ni nanochains was constructed via a directional-freezing method followed by the hydrazine vapor reduction process. The oriented cell structure and heterogeneous dielectric/magnetic interfaces benefit the superior absorption performance by forming perfect impedance matching, multiple polarizations, and electric/magnetic-coupling effects. Interestingly, the prepared ultralight Ni/MXene/RGO (NiMR-H) aerogel (6.45 mg cm^-3) delivers the best EMA performance in reported MXene-based absorbing materials up to now, with a minimal reflection loss (RL_min) of -75.2 dB (99.999 996% wave absorption) and a broadest EAB of 7.3 GHz. Furthermore, the excellent structural robustness and mechanical properties, as well as the high hydrophobicity and heat insulation performance (close to air), guarantee the stable and durable EMA application of the NiMR-H aerogel to resist deformation, water or humid environments, and high-temperature attacks.

Applications of Ceramic/Graphene Composites and Hybrids

Research activity on ceramic/graphene composites and hybrids has increased dramatically in the last decade. In this review, we provide an overview of recent contributions involving ceramics, graphene, and graphene-related materials (GRM, i.e., graphene oxide, reduced graphene oxide, and graphene nanoplatelets) with a primary focus on applications. We have adopted a broad scope of the term ceramics, therefore including some applications of GRM with certain metal oxides and cement-based matrices in the review. Applications of ceramic/graphene hybrids and composites cover many different areas, in particular, energy production and storage (batteries, supercapacitors, solar and fuel cells), energy harvesting, sensors and biosensors, electromagnetic interference shielding, biomaterials, thermal management (heat dissipation and heat conduction functions), engineering components, catalysts, etc. A section on ceramic/GRM composites processed by additive manufacturing methods is included due to their industrial potential and waste reduction capability. All these applications of ceramic/graphene composites and hybrids are listed and mentioned in the present review, ending with the authors' outlook of those that seem most promising, based on the research efforts carried out in this field.

Rationally designed structure of mesoporous carbon hollow microspheres to acquire excellent microwave absorption performance

In this study, we used a novel and facile hard-template etching method to manufacture mesoporous carbon hollow microspheres (MCHMs). We prove that the dielectric ability and microwave absorption of MCHMs can be adjusted by structural characteristics. When the average particle size of MCHMs is 452 nm, the paraffin composite material mixed with 10 wt% MCHMs can achieve a maximum reflection loss value of -51 dB with a thickness of 4.0 mm at 7.59 GHz. When the average particle size of MCHMs is 425 nm, the effective absorption bandwidth of the paraffin composite material mixed with 10 wt% MCHMs can achieve a broad bandwidth of 7.14 GHz with a thickness of 2.5 mm. Compared with other microwave absorbers, MCHMs possess high microwave absorption capacity and broad microwave absorption bandwidth with as low as a 10 wt% filler ratio. This excellent microwave absorption performance is due to the internal cavity and the mesoporous shell of MCHMs. By rationally designing the structure of MCHMs, excellent microwave absorption performance can be acquired. Meanwhile, this design concept based on a rational design of spherical structure can be extended to other spherical absorbers.