A broad perspective to particle-laden fluid interfaces systems: from chemically homogeneous particles to active colloids

Motion of magnetic motors across liquid-liquid interface

HYPOTHESIS

In a number of applications related to chemical engineering and drug delivery, magnetic nanoparticles should move through a liquid-liquid interface in the presence of surfactant molecules. However, due to the action of capillary forces, this is not always possible. The mechanism of particle motion through the interface essentially depends on the intensity of the Marangoni flow, which is induced on the interface during its deformation.

EXPERIMENTS

In this paper we study the motion of nanoparticles Fe3O4 through the water-tridecane interface under the action of a nonuniform magnetic field when using different surfactants.

FINDINGS

If the linear size of the magnetic motor turns out to be less than a certain critical value, then it is not able to move between phases due to the action of capillary forces on the interface. Depending on the type and concentration of the surfactant used, various mechanisms for the motor motion through the liquid-liquid interface can be carried out. In one of them, a liquid phase is transferred through the interface along with a movable motor, while in the other, it is not.

Exploring the 3D Conformation of Hard-Core Soft-Shell Particles Adsorbed at a Fluid Interface

The encapsulation of a rigid core within a soft polymeric shell allows obtaining composite colloidal particles that retain functional properties, e.g., optical or mechanical. At the same time, it favors their adsorption at fluid interfaces with a tunable interaction potential to realize tailored two-dimensional (2D) materials. Although they have already been employed for 2D assembly, the conformation of single particles, which is essential to define the monolayer properties, has been largely inferred via indirect or ex situ techniques. Here, by means of in situ atomic force microscopy experiments, the authors uncover the interfacial morphology of hard-core soft-shell microgels, integrating the data with numerical simulations to elucidate the role of the core properties, of the shell thicknesses, and that of the grafting density. They identify that the hard core can influence the conformation of the polymer shells. In particular, for the case of small shell thickness, low grafting density, or poor core affinity for water, the core protrudes more into the organic phase, and the authors observe a decrease in-plane stretching of the network at the interface. By rationalizing their general wetting behavior, such composite particles can be designed to exhibit specific inter-particle interactions of importance both for the stabilization of interfaces and for the fabrication of 2D materials with tailored functional properties.

Capillary detachment of a microparticle from a liquid-liquid interface

The attachment and detachment of microparticles at a liquid-liquid interface are common in many material systems, from Pickering emulsions and colloidal assemblies to capillary suspensions. Properties of these systems rely on how the particles interact with the liquid-liquid interface, including the detachment process. In this study, we simultaneously measure the capillary detachment force of a microparticle from a liquid-liquid interface and visualize the shape of the meniscus by combining colloidal probe microscopy and confocal microscopy. The capillary behavior is studied on both untreated (hydrophilic) and fluorinated (hydrophobic) glass microparticles. The measured force data show good agreement with theoretical calculations based on the extracted geometric parameters from confocal images of the capillary bridge. It is also evident that contact line pinning is an important aspect of detachment for both untreated and fluorinated particles.

Stimuli-Responsive Langmuir Films Composed of Nanoparticles Decorated with Poly(N-isopropyl acrylamide) (PNIPAM) at the Air/Water Interface

The nanotechnology shift from static toward stimuli-responsive systems is gaining momentum. We study adaptive and responsive Langmuir films at the air/water interface to facilitate the creation of two-dimensional (2D) complex systems. We verify the possibility of controlling the assembly of relatively large entities, i.e., nanoparticles with diameter around 90 nm, by inducing conformational changes within an about 5 nm poly(N-isopropyl acrylamide) (PNIPAM) capping layer. The system performs reversible switching between uniform and nonuniform states. The densely packed and uniform state is observed at a higher temperature, i.e., opposite to most phase transitions, where more ordered phases appear at lower temperatures. The induced nanoparticles' conformational changes result in different properties of the interfacial monolayer, including various types of aggregation. The analysis of surface pressure at different temperatures and upon temperature changes, surface potential measurements, surface rheology experiments, Brewster angle microscopy (BAM), and scanning electron microscopy (SEM) observations are accompanied by calculations to discuss the principles of the nanoparticles' self-assembly. Those findings provide guidelines for designing other adaptive 2D systems, such as programable membranes or optical interfacial devices.

Quantification of polystyrene microsphere attachment probability at the oil‒water interface using a microfluidic platform

This study investigates the effects of interparticle interactions and wettability on the particle attachment efficacy to the oil‒water interface. Three types of PS particles with different surface functional groups were examined at varying salt concentrations and the number of particles injected into the interface. Based on the microfluidic method and the surface coverage measurement, we found that the two contributing factors significantly influenced particle attachment efficiency to the interface, while the wettability factor has a major contribution. This research contributes to the understanding of physicochemical aspects of particle assembly at fluid interfaces and can offer strategies for forming tailored structures with desired interfacial properties.

Janus Ligand-Tethered Nanoparticles at Liquid-Liquid Interfaces

We investigate the structural properties of Janus ligand-tethered nanoparticles at liquid-liquid interfaces using coarse-grained molecular dynamics simulations. The effect of interactions between different chains and liquids is discussed. We consider the Janus particles with symmetrical interactions with the liquids which correspond to supplementary wettability and particles with uncorrelated interactions. Simulation results indicate that the Janus hairy particles trapped in the interface region have different configurations characterized by the vertical displacement distance, the orientation of the Janus line relative to the interface, and the particle shape. The Janus hairy particles present abundant morphologies, including dumbbell-like and typical core-shell, at the interface. The shape of adsorbed particles is analyzed in detail. The simulation data are compared with those predicted by a simple phenomenological approach. This work can promote the applications of Janus hairy particles in nanotechnology.

Hybrid Nanoparticles at Fluid-Fluid Interfaces: Insight from Theory and Simulation

Hybrid nanoparticles that combine special properties of their different parts have numerous applications in electronics, optics, catalysis, medicine, and many others. Of the currently produced particles, Janus particles and ligand-tethered (hairy) particles are of particular interest both from a practical and purely cognitive point of view. Understanding their behavior at fluid interfaces is important to many fields because particle-laden interfaces are ubiquitous in nature and industry. We provide a review of the literature, focusing on theoretical studies of hybrid particles at fluid-fluid interfaces. Our goal is to give a link between simple phenomenological models and advanced molecular simulations. We analyze the adsorption of individual Janus particles and hairy particles at the interfaces. Then, their interfacial assembly is also discussed. The simple equations for the attachment energy of various Janus particles are presented. We discuss how such parameters as the particle size, the particle shape, the relative sizes of different patches, and the amphiphilicity affect particle adsorption. This is essential for taking advantage of the particle capacity to stabilize interfaces. Representative examples of molecular simulations were presented. We show that the simple models surprisingly well reproduce experimental and simulation data. In the case of hairy particles, we concentrate on the effects of reconfiguration of the polymer brushes at the interface. This review is expected to provide a general perspective on the subject and may be helpful to many researchers and technologists working with particle-laden layers.

The interfacial and assembly properties of in situ producing silica nanoparticle at oil-water interface

In multiphase materials, structured fluid-fluid interfaces can provide mechanical resistance against destabilization, applicable for conformance control, Pickering emulsion, liquid 3D printing and molding, etc. Currently all research prepare the particle-ladened fluid-fluid interfaces by dispersing ex situ acquired particles to the immiscible interface, which limits their application in the harsh environment, such as oil reservoir which can impair particle stability and transport ability. Here, we investigated the interfacial and assembly properties of the interface where SiO2 nanoparticles (NPs) were in situ produced. The experimental results show that ammonia as catalyst could accelerate the processes of silica NPs formation as well as the interfacial tension (IFT) evolution. High temperature could not accelerate the reaction processes to achieve the lowest equilibrium IFT, but it induced the sine-wave IFT evolution curves regardless of the presence of ammonia. The equilibrium IFTs corresponded to the saturation states of interfaces trapping with SiO2 NPs, while the sine-wave fluctuating patterns of IFT were attributed to the alternating transition between interfacial jammed and unjammed states changing along with the reaction process. Silica NPs diffusing into aqueous phase with high salinity also showed good stability, due to the abundant surface decoration with in situ anchored organic species.

Forces Controlling the Assembly of Particles at Fluid Interfaces

The interaction of particles with fluid interfaces is ubiquitous in synthetic and natural work, involving two types of interactions: particle-interface interactions (trapping energy) and interparticle interactions. Therefore, it is urgent to gain a deep understanding of the main forces controlling the trapping of particles at fluid interfaces, and their assembly to generate a broad range of structures characterized by different degrees of order. This Perspective tries to provide an overview of the main contributions to the energetic landscape controlling the assembly of particles at fluid interfaces, which is essential for exploiting this type of interfacial systems as platforms for the fabrication of interface-based soft materials with technological interest.

Separation of false-positive microplastics and analysis of microplastics via a two-phase system combined with confocal Raman spectroscopy

In the field of microplastics research, more accurate standardised methods and analytical techniques still need to be explored. In this study, a new method for the microplastics quantitatively and qualitatively analysis by two-phase (ethyl acetate-water) system combined with confocal Raman spectroscopy was developed. Microplastics can be separated from false-positive microplastics in beach sand and marine sediment, attributing to the hydrophobic-lipophilic interaction (HLI) of the two-phase system. Results show that the recovery rates of complex environment microplastics (polypropylene (PP), polyethylene terephthalate (PET), polyvinyl chloride (PVC), polyamide 66 (PA 66), polycarbonate (PC) and polyethylene (PE)) are higher than 92.98%. Moreover, the new technique can also be used to detect hydrophobic and lipophilic antibiotics, such as sulfamethoxazole (SMX), erythromycin (EM), madimycin (MD), and josamycin (JOS), which adsorbed on microplastics and are extracted based on the dissolving-precipitating mechanism. This innovative research strategy provides a new scope for further detection of marine environment microplastics and toxic compounds adsorbed on its surface.

Direct Measurement of Surfactant-Mediated Picoforces among Nanoparticles in a Quasi-Two-Dimensional Environment

The lack of methodologies which enable us to measure forces acting between nanomaterials is one of the factors limiting the full comprehension of their behavior and their more effective exploitation in new devices. Here we exploit the irreversible adsorption of surfactant-decorated nanoparticles at the air/water interface to investigate interparticle forces and the effect of the surfactant structure on them. We measured the interparticle repulsive forces as a function of the modulation of the interparticle distance by simultaneously performing compression isotherms and the grazing incidence small-angle X-ray scattering (GISAXS) structural characterization of the monolayers at water-vapor interfaces. Our results demonstrate that the short-range interparticle forces are strongly affected by the presence of the organic ligands, which are shown to be able to influence the interparticle repulsions even when added in micromolar amounts. In particular, we demonstrate the predominant steric nature of short-range forces, which are accounted for in terms of the compression-induced stretched-to-coiled conformational transition of the ligand hydrophobic tail.

Topographical Design and Thermal-Induced Organization of Interfacial Water Structure to Regulate the Wetting State of Surfaces

Smart surfaces with superhydrophobic/superhydrophilic characteristics can be controlled by external stimuli, such as temperature. These transitions are attributed to the molecular-level conformation of the grafted polymer chains due to the varied interactions at the interface. Here, tunable surfaces were prepared by grafting two well-known thermo-responsive polymers, poly(N-isopropylacrylamide) (PNIPAM) and poly(oligoethylene glycol)methyl ether acrylate (POEGMA₁₈₈) onto micro-pollen particles of uniform morphology and roughness. Direct Raman spectra and thermodynamic analyses revealed that above the lower critical solution temperature, the bonded and free water at the interface partially transformed to intermediate water that disrupted the "water cage" surrounding the hydrophobic groups. The increased amounts of intermediate water produced hydrogen bonding networks that were less ordered around the polymer grafted microparticles, inducing a weaker binding interaction at the interface and a lower tendency to wet the surface. Combining the roughness factor, the bulk surface assembled by distinct polymer-grafted-pollen microparticles (PNIPAM or POEGMA₁₈₈) could undergo a different wettability transition for liquid under air, water, and oil. This work identifies new perspectives on the interfacial water structure variation at a multiple length scale, which contributed to the temperature-dependent surface wettability transition. It offers inspiration for the application of thermo-responsive surface to liquid-gated multiphase separation, water purification and harvesting, biomedical devices, and printing.

Hydrodynamic interactions between charged and uncharged Brownian colloids at a fluid-fluid interface

HYPOTHESIS

The cluster formation and self-assembly of floating colloids at a fluid/fluid interface is a delicate force balance involving deterministic lateral interaction forces, viscous resistance to relative colloid motion along the surface and thermal (Brownian) fluctuations. As the colloid dimensions get smaller, thermal forces and associated drag forces become important and can affect the self assembly into ordered patterns and crystal structures that are the starting point for various materials applications.

NUMERICS

Langevin dynamic simulations for particle pairs straddling a liquid-liquid interface with a high viscosity contrast are presented to describe the lateral interfacial assembly of particles in Brownian and non-Brownian dominated regimes. These simulations incorporate capillary attraction, electrostatic repulsion, thermal fluctuations and hydrodynamic interactions (HI) between particles (including the effect of the particle immersion depth). Simulation results are presented for neutrally wetted particles which form a contact angle θ=90⁰ at the interface.

FINDINGS

The simulation results suggest that clustering, fractal growth and particle ordering become favorable outcomes at critically large values of the Pe numbers, while smaller Pe numbers exhibit higher probabilities of final configurations where particle motion remains uncorrelated in space and particle pairs are found to be more widely separated especially upon the introduction of HI.

Pickering Emulsions: A Novel Tool for Cosmetic Formulators

The manufacturing of stable emulsion is a very important challenge for the cosmetic industry, which has motivated intense research activity for replacing conventional molecular stabilizers with colloidal particles. These allow minimizing the hazards and risks associated with the use of conventional molecular stabilizers, providing enhanced stability to the obtained dispersions. Therefore, particle-stabilized emulsions (Pickering emulsions) present many advantages with respect to conventional ones, and hence, their commercialization may open new avenues for cosmetic formulators. This makes further efforts to optimize the fabrication procedures of Pickering emulsions, as well as the development of their applicability in the fabrication of different cosmetic formulations, necessary. This review tries to provide an updated perspective that can help the cosmetic industry in the exploitation of Pickering emulsions as a tool for designing new cosmetic products, especially creams for topical applications.

Exploiting Heteroaggregation to Quantify the Contact Angle of Charged Colloids at Interfaces

We exploit the aggregation between oppositely charged particles to visualize and quantify the equilibrium position of charged colloidal particles at the fluid-water interface. A dispersion of commercially available charge-stabilized nanoparticles was used as the aqueous phase to create oil-water and air-water interfaces. The colloidal particles whose charge was opposite that of the nanoparticles in the aqueous phase were deposited at the chosen fluid-water interface. Heteroaggregation, i.e., aggregation between oppositely charged particles, leads to the deposition of nanoparticles onto the larger particle located at the interface; however, this only occurs on the surface of the particle in contact with the aqueous phase. This selective deposition of nanoparticles on the surfaces of the particles exposed to water enables the distinct visualization of the circular three-phase contact line around the particles positioned at the fluid-water interface. Since the electrostatic association between the nanoparticles and the colloids at interfaces is strong, the nanoparticle assembly on the larger particles is preserved even after being transferred to solid substrates via dip-coating. This facilitates the easy visualization of the contact line by electron microscopy and the determination of the equilibrium contact angle of colloidal particles (θ) at the fluid-water interface. The suitability of the method is demonstrated by the measurement of the three-phase contact angle of positively and negatively charged polystyrene particles located at fluid-water interfaces by considering particles with sizes varying from 220 nm to 8.71 μm. The study highlights the effect of the size ratio between the nanoparticles in the aqueous phase and the colloidal particles on the accuracy of the measurement of θ.

Effects of Oil Phase on the Inversion of Pickering Emulsions Stabilized by Palmitic Acid Decorated Silica Nanoparticles

Pickering emulsions stabilized by the interaction of palmitic acid (PA) and silica nanoparticles (SiNPs) at the water/oil interface have been studied using different alkane oil phases. The interaction of palmitic acid and SiNPs has a strong synergistic character in relation to the emulsion stabilization, leading to an enhanced emulsion stability in relation to that stabilized only by the fatty acid. This results from the formation of fatty acid-nanoparticle complexes driven by hydrogen bond interactions, which favor particle attachment at the fluid interface, creating a rigid armor that minimizes droplet coalescence. The comparison of emulsions obtained using different alkanes as the oil phase has shown that the hydrophobic mismatch between the length of the alkane chain and the C16 hydrophobic chain of PA determines the nature of the emulsions, with the solubility of the fatty acid in the oil phase being a very important driving force governing the appearance of phase inversion.

Soft Colloidal Particles at Fluid Interfaces

The assembly of soft colloidal particles at fluid interfaces is reviewed in the present paper, with emphasis on the particular case of microgels formed by cross-linked polymer networks. The dual polymer/colloid character as well as the stimulus responsiveness of microgel particles pose a challenge in their experimental characterization and theoretical description when adsorbed to fluid interfaces. This has led to a controversial and, in some cases, contradictory picture that cannot be rationalized by considering microgels as simple colloids. Therefore, it is necessary to take into consideration the microgel polymer/colloid duality for a physically reliable description of the behavior of the microgel-laden interface. In fact, different aspects related to the above-mentioned duality control the organization of microgels at the fluid interface, and the properties and responsiveness of the obtained microgel-laden interfaces. This works present a critical revision of different physicochemical aspects involving the behavior of individual microgels confined at fluid interfaces, as well as the collective behaviors emerging in dense microgel assemblies.