Transition metal compounds: From properties, applications to wettability regulation

Regulating Interfacial Wettability for Fast Mass Transfer in Rechargeable Metal-Based Batteries

The interfacial wettability between electrodes and electrolytes could ensure sufficient physical contact and fast mass transfer at the gas-solid-liquid, solid-liquid, and solid-solid interfaces, which could improve the reaction kinetics and cycle stability of rechargeable metal-based batteries (RMBs). Herein, interfacial wettability engineering at multiphase interfaces is summarized from the electrolyte and electrode aspects to promote the interface reaction rate and durability of RMBs, which illustrates the revolution that is taking place in this field and thus provides inspiration for future developments in RMBs. Specifically, this review presents the principle of interfacial wettability at macro- and microscale and summarizes emerging applications concerning the interfacial wettability effect on mass transfer in RMBs. Moreover, deep insight into the future development of interfacial wettability is provided in the outlook. Therefore, this review not only provides insights into interfacial wettability engineering but also offers strategic guidance for wettability modification and optimization toward stable electrode-electrolyte interfaces for fast mass transfer in RMBs.

Advances in MXene-based technologies for the remediation of toxic phenols: A comprehensive review

The pressing global issue of organic pollutants, particularly phenolic compounds derived primarily from industrial wastes, poses a significant threat to the environment. Although progress has been made in the development of low-cost materials for phenolic compound removal, their effectiveness remains limited. Thus, there is an urgent need for novel technologies to comprehensively address this issue. In this context, MXenes, known for their exceptional physicochemical properties, have emerged as highly promising candidates for the remediation of phenolic pollutants. This review aims to provide a comprehensive and critical evaluation of MXene-based technologies for the removal of phenolic pollutants, focusing on the following key aspects: (1) The classification and categorization of phenolic pollutants, highlighting their adverse environmental impacts, and emphasizing the crucial need for their removal. (2) An in-depth discussion on the synthesis methods and properties of MXene-based composites, emphasizing their suitability for environmental remediation. (3) A detailed analysis of MXene-based adsorption, catalysis, photocatalysis, and hybrid processes, showcasing current advancements in MXene modification and functionalization to enhance removal efficiency. (4) A thorough examination of the removal mechanisms and stability of MXene-based technologies, elucidating their operating conditions and stability in pollutant removal scenarios. (5) Finally, this review concludes by outlining future challenges and opportunities for MXene-based technologies in water treatment, facilitating their potential applications. This comprehensive review provides valuable insights and innovative ideas for the development of versatile MXene-based technologies tailored to combat water pollution effectively.

Four polyoxomolybdated-based 3D compounds as supercapacitors and amperometric sensors

Four polyoxomolybdated compounds based on Tetp (Tetp = 4-[4-(2-Thiophen-2-yl-ethyl)-4H-[1, 2, 4]triazole-3-yl]-pyridine), namely [Zn(Tetp)2(H2O)2][(β-Mo8O26)0.5] (Zn-Mo8), [Co(Tetp)2(H2O)2][(β-Mo8O26)0.5] (Co-Mo8), [Cu4(Tetp)6(H2O)2]{H3[K(H2O)3](θ-Mo8O26)(Mo12O40)}·8H2O (Cu-Mo20) and [Cu3(Tetp)3][PMo12O40]·H2O (Cu-PMo12) are synthesized by hydrothermal methods and are used as electrode materials for supercapacitors(SCs) and electrochemical sensors. Inserting polyoxometalates (POMs) with redox active sites into transition metal compounds (TMCs) can improve the internal ion/electron transfer rate, thus effectively enhancing the electrochemical performance. Compared with the parent POMs, four compounds exhibit excellent electrochemical properties. In particular, Cu-PMo12 shows an excellent specific capacitance (812.3 F g-1 at 1 A g-1) and stability (94.42%), as well as a wide detection range (0.05 to 1250 µM) and a low detection limit (0.057 µM) for NO2- sensing.

F-free etching and ingenious construction of hydrogel layer-prepared MXene membranes for oily wastewater separation

A strategy for the preparation of hydrogel layer MXene membranes by an F-free method was proposed. It maintained high permeance (2686.1 L m-2 h-1 bar-1) and separation efficiency (99.99%) even after 300 min of emulsion separation. The membrane resisted harsh chemical and microbiological environments and efficiently treated actual oily wastewater.