Use of chemically activated cotton nut shell carbon for the removal of fluoride contaminated drinking water: Kinetics evaluation

Transformative and sustainable insights of agricultural waste-based adsorbents for water defluoridation: Biosorption dynamics, economic viability, and spent adsorbent management

With the progression of civilization, the harmony within nature has been disrupted, giving rise to various ecocidal activities that are evident in every spheres of the earth. These activities have had a profound and far-reaching impact on global health. One significant example of this is the presence of fluoride in groundwater exceeding acceptable limits, resulting in the widespread occurrence of "Fluorosis" worldwide. It is imperative to mitigate the concentration of fluoride in drinking water to meet safety standards. While various defluoridation techniques exist, they often have drawbacks. Biosorption, being a simple, affordable and eco-friendly method, has gained preference for defluoridation. However, its limited commercialization underscores the pressing need for further research in this domain. This comprehensive review article offers a thorough examination of the defluoridation potential of agro-based adsorbents, encompassing their specific chemical compositions and preparation methods. The review presents an in-depth discussion of the factors influencing fluoride biosorption and conducts a detailed exploration of adsorption isotherm and adsorption kinetic models to gain a comprehensive understanding of the nature of the adsorption process. Furthermore, it evaluates the commercial viability through an assessment of regeneration potential and a cost analysis of these agro-adsorbents, with the aim of facilitating the scalability of the defluoridation process. The elucidation of the adsorption mechanism and recommendations for overcoming challenges in large-scale implementation offer a comprehensive outlook on this eco-friendly and sustainable approach to fluoride removal. In summary, this review article equips readers with a lucid understanding of agro-adsorbents, elucidates their ideal conditions for improved performance, offers a more profound insight into the fluoride biosorption mechanism, and introduces the concept of effective spent adsorbent management.

A review of the application of fungi as an effective and attractive bio-adsorbent for biosorption of heavy metals from wastewater

One of the most hazardous environmental pollutants is the pollution risen by heavy metal ions in effluents, which is increasing due to the increasing human activity and the development of urbanization. Notwithstanding the economic challenges to control the pollution of effluent treatment processes, it seems necessary to provide effective approaches. The sorption method is widely used due to low-cost, flexibility in design and operation, repeatability, and significant performance. Hence, the need for more environmentally friendly sorbents to eliminate metal ions is greater than ever. Due to the unique features such as the presence of chitin and chitosan in the cell wall, high absorption capacity, environmental friendliness, availability, and cheapness, the use of fungi as adsorbent has received much attention. Therefore, this work tries to address the use of fungi as biosorbents to remove these metals, the dangers of heavy metals, and their sources. Moreover, equilibrium, kinetic, and thermodynamic behaviors of the heavy metal ion adsorption process in the literature are briefly studied.

Size-tunable effect of CaCO3/nanocellulose hybrid composites on the removal of paracetamol from aqueous solution

Paracetamol is a ubiquitous drug used by animals and humans but is not fully metabolized within their bodies, and thus often finds its way into raw wastewater. This study represents a new class of adsorbent nanocomposite with high adsorption capacity towards paracetamol removal. Herein, both the kinetic study and the removal of paracetamol from aqueous solutions were investigated in terms of diverse CaCO₃/nanocellulose composites with different surface charges and different particle sizes. To fine-tune these parameters, the latter was hydrothermally synthesized by manipulating of three nanocelluloses types. Precisely, micro-crystalline cellulose (MCC), nano-crystalline cellulose (CNC), and nano-fibrillated cellulose (NFC) were used as templates for precipitating CaCO₃ particles from CaCl₂ solution with the aid of Na₂CO₃. Results revealed the successful in situ deposition of calcite form of CaCO₃ with size varied relying on the base of nanocellulose. For MCC, CNC, and NFC, the size of CaCO₃ was disclosed in the range of 850-1200 nm, 350-600 nm, and 150-200 nm, respectively, regarding their surface charge. While the process of paracetamol adsorption was described by Freundlich and Langmuir isotherms, it was observed that, for MCC, the best fit of the experimental data was achieved with the Freundlich model, while the Langmuir model was the most appropriate for CNC and NFC. Also, the highest max adsorption capacities of paracetamol varied respectively to both size and surface charge of hybrid composite used. Among them, MCC/CaCO₃ composite exhibited the highest max adsorption capacity at 428 mg g^-1, clarifying that the low surface zeta potential of the latter hybrid nanocomposite is responsible for the accumulation of CaCO₃ at a bigger size with a higher affinity to adsorb paracetamol with the highest capacity due to its weak repulsion. Results also demonstrated that the material is highly effective and economical for removal of paracetamol and reusability with marginal diminishing in adsorption capacity up to 10% after five reuse cycles.

Magnetic chitosan microspheres: An efficient and recyclable adsorbent for the removal of iodide from simulated nuclear wastewater

The efficient and recyclable magnetic chitosan microspheres (MCMs) were successfully synthesized to remove iodide from nuclear wastewater and characterized through XRD, FTIR, SEM, EDS, VSM, TGA and XPS. The characterization results indicated that the MCMs exhibited smooth spherical morphology and good magnetic properties. The removal potential of MCMs was investigated for iodide (I^-) anions at different conditions. From pH 3 to pH 9, MCMs performed the high I^- removal efficiency (>90%). The maximum I^- removal capacity of MCMs was up to 0.8087 mmol g^-1 at 298 K, well-fitting with the pseudo-second-order and Sips models. Furthermore, the I^- removal efficiency of MCMs still maintained more than 91% after five adsorption-desorption cycles, performing good regeneration and reusability. This study is expected to prompt the MCMs to become an efficient and recyclable biosorbent for iodide removal from nuclear wastewater.

Mesoporous aluminum impregnated rubber seed shell waste enriched with calcium as adsorbent material for the removal of microbial DNA in aqueous solution

Water contamination by pathogens and diseases induced by these pathogens is a major water quality issue all over the world. Poor public health has been linked to tap water polluted with DNA harboring antibiotic resistance genes sequence. According to HSAB concept, surface modification of rubber seed shell waste with alumina (AIRSS) as novel agro-waste adsorbent creates more active surface constituents for DNA adsorption. The proximate, ultimate and EDAX analysis provides the percentage levels of ash concentration, volatile, moisture and fixed carbon content, elemental composition present in the adsorbent. The structural features of AIRSS were determined using FT-IR, SEM and XRD. In order to improve reaction conditions, the effect of pH, temperature, adsorbent amount, and reaction time is also examined. The highest percent of DNA removal (92.5%) was achieved at the optimum conditions: 2 g/L at pH 4, contact time 120 minutes as compared to the conventional methods. The DNA adsorbs onto the surface of AIRSS through physical (vander Waals force) and chemical interactions, as demonstrated by kinetics and spectroscopic analyses. Changes in enthalpy (H), free energy (G), and entropy (S) indicate that adsorption is a spontaneous and exothermic process, according to thermodynamic parameters. The results of the experiments showed that the prepared AIRSP adsorbent could be used to remove DNA from water. The efficacy of AIRSS for the removal of DNA has decreased after nine months of storage and use. Low pH and the presence of AIRSS improved DNA-AIRSS adsorption, according to our findings.

Fabrication of Manganese-Supported Activated Alumina Adsorbent for Defluoridation of Water: A Kinetics and Thermodynamics Study

Fluoride pollution frequently occurs in many underground drinking water sources due to discrepancies in the geological environment. To address this problem, a manganese-supported activated alumina (MnOOH-supported AA) adsorbent was proposed in the present study. The adsorbent was prepared with an impregnation method, then the morphology and microstructure were systematically characterized. Further, the adsorption kinetics and thermodynamics were systematically explored through static experiments to confirm the adsorption mechanism. The results showed that MnOOH was successfully loaded on the activated alumina (AA), and irregular and convex spinous structures were formed on the surface of particles. Compared with the AA, MnOOH-supported AA exhibited a significantly higher defluoridation rate, which has been doubled. The kinetic behavior of fluoride adsorption on MnOOH-supported AA was governed by the quasi-second-order kinetics model with regression coefficients of 0.9862, 0.9978 and 0.9956, respectively. The adsorption rate was mainly ascribed to the intra-particle diffusion. Additionally, the Freundlich isotherm equation fitted the adsorption thermodynamic process reasonably well compared with the Langmuir adsorption model. Specifically, the correlation coefficients were 0.9614, 0.9383 and 0.9852 at 25 °C, 35 °C and 45 °C, respectively. The adsorption–desorption isotherm plot was similar to the Type V isotherm. The whole fluoride adsorption was a spontaneous endothermic reaction, and controlled by chemical adsorption. These results demonstrated that MnOOH-supported AA as an alternative to the conventional AA showed promising potential for defluoridation in drinking water treatment.

A review of the application of sea material shells as low cost and effective bio-adsorbent for removal of heavy metals from wastewater

The pollution caused by heavy metal ions in industrial wastewater is of a great concern. Applying effective and low-cost methods is an urgent need for treatment of polluted water and aqueous solutions. Biosorption have received the most attention among the various methods. It has become an alternative technique to conventional technologies due to low cost, simple operation and treatment for heavy metal recovery, and high selectivity. In recent years, sea material shells have been applied as one of the most cost-effective bio-adsorbents due to their special properties. They are environmentally friendly, low cost, and easy to access and have high adsorption capacity. The purpose of this review is to present the application of oyster shell, snail shell, and shrimp shell as low-cost and effective biosorbents for removal of noxious heavy metals from aqueous solutions. In addition, heavy metals, their sources, and ways to remediate them from waste streams and various factors affecting the biosorption process with sea materials shells are also reviewed. Moreover, a brief description and literature review of the equilibrium, kinetic, and thermodynamic behaviors of the heavy metal ion adsorption process on sea material shells have been studied. Finally, further applications of sea materials shell for waste effluents treatment are specially focused.

Cross-linked chitosan microspheres entrapping silver chloride via the improved emulsion technology for iodide ion adsorption

Radioactive iodine waste from nuclear plant became the severe environmental problem and led to the public health concern. The cross-linked chitosan adsorbed iodide anions through the electrical attraction, yet performing limited-efficiently. Targeting as the better adsorption, the modified chitosan sorbent as AgCl@CM (silver chloride entrapped in the cross-linked chitosan microspheres) for iodine adsorption was proposed and implemented by chemisorption from AgCl and physisorption from chitosan via the improved emulsion method (emulsions mixing-collision and polymerization). With the broad application from pH 2 to pH 10, the spherical AgCl@CM (from 0.20 g silver nitrate) performed the I¹²⁷ anions (instead of radioactive iodine) adsorption efficiency of higher than 90 % in 20 min, with the maximum adsorption capacity of 1.5267 mmol/g, well-fitting with the pseudo-first-order model and Sips isothermal model. AgCl@CM also performed I¹²⁷ adsorption with the significant selectivity relative to Cl^-. The micro-spherical AgCl@CM sorbents were therefore prospective-effectively for iodine waste water treatment.

Preparation and characterization of novel green synthesized iron-aluminum nanocomposite and studying its efficiency in fluoride removal

A novel green synthesized iron-aluminum nanocomposite was prepared and characterized by FESEM, FTIR, EDX, XRD, BET, DSC and TGA analysis. The clove extract acting as both reducing and surface coating agent was optimized based on its maximum total flavonoid content (TFC) and total polyphenolic content (TPC). Fluoride adsorption studies was performed at 298K, 303K and 313K within the range of 10-40 mg/L fluoride solution for kinetic and isotherm studies. Maximum adsorption capacity of 42.95 mg/g was obtained for 0.25 g/L adsorbent dosage. Moreover fluoride adsorption obeyed pseudo second order kinetic model whereas the process was multistage diffusion controlled. Langmuir isotherm model best fitted the equilibrium data with monolayer adsorption capacities of 25.09, 26.08 and 28.07 mg/g at 298, 303 and 313K respectively. The findings confirmed that the fluoride adsorption process followed ion exchange mechanism with the surface hydroxyl groups. The prepared nanocomposite was utilized for treating fluoride contaminated water samples from north-east regions of India which showed efficient removal percentage.

Hydrothermal synthesis of a mineral-substituted hydroxyapatite nanocomposite material for fluoride removal from drinking water

Mineral substituted hydroxyapatite (mHAp) nanocomposite was synthesized and it shows high fluoride adsorption capacity.