Regulatable pervaporation performance of Zn-MOFs/polydimethylsiloxane mixed matrix pervaporation membranes

Incorporating Mixed-Ligand Zeolitic Imidazolate Framework into Polydimethyldiethoxysilane (PDMDES) Membrane for Enhancing Alcohol Pervaporation Recovery

In the present study, a zeolitic imidazolate framework with mixed ligands, ZIF-8-90, was synthesized and embedded into an ultrathin polydimethyldiethoxysilane (PDMDES) matrix to prepare a ZIF-8-90/PDMDES mixed matrix membrane (MMM) for the enhanced recovery of alcohols from dilute aqueous solutions via pervaporation, using a facile solution coating method. The synthesized ZIF-8-90 particles demonstrated superior hydrophobicity and thermal stability compared to those of both ZIF-8 and ZIF-90 particles. Furthermore, the hydrophobicity, thermal stability, and sorption ability for alcohols of the ZIF-8-90/PDMDES MMM were significantly improved, attributed to the incorporation of mixed-ligand ZIF-8-90. Notably, the MMMs displayed two distinct cross-sectional morphologies: (1) ZIF-8-90 particles enveloped by PDMDES polymer forming filler bulges and (2) an accumulation of ZIF-8-90 particles resembling a brick-wall-like structure. The MMM incorporating 2.5 wt % ZIF-8-90 exhibited the optimal performance among the fabricated MMMs with various ZIF-8-90 loadings, spanning from 0 to 3.2 wt %. The effects of feed concentrations and operation temperatures were systematically investigated. The best pervaporation performance was achieved using the 2.5 wt % ZIF-8-90-filled MMM, effectively separating a 5.0 wt % ethanol/water mixture at 60 °C, yielding a distinguished total flux of 7.70 kg·m-2·h-1, an improved separation factor of 9.96, and an extraordinarily high PSI of 68.99 kg·m-2·h-1. Comparative analyses highlighted the superior pervaporation performance of the ZIF-8-90/PDMDES MMM over ZIF-8/PDMDES MMM, ZIF-90/PDMDES MMM, and other MMMs, underscoring its potential for practical applications in alcohol recovery.

Modification of Thin Film Composite PVA/PAN Membranes for Pervaporation Using Aluminosilicate Nanoparticles

The effect of the modification of the polyvinyl alcohol (PVA) selective layer of thin film composite (TFC) membranes by aluminosilicate (Al₂O₃·SiO₂) nanoparticles on the structure and pervaporation performance was studied. For the first time, PVA-Al₂O₃·SiO₂/polyacrylonitrile (PAN) thin film nanocomposite (TFN) membranes for pervaporation separation of ethanol/water mixture were developed via the formation of the selective layer in dynamic mode. Selective layers of PVA/PAN and PVA-Al₂O₃·SiO₂/PAN membranes were formed via filtration of PVA aqueous solutions or PVA-Al₂O₃·SiO₂ aqueous dispersions through the ultrafiltration PAN membrane for 10 min at 0.3 MPa in dead-end mode. Average particle size and zeta potential of aluminosilicate nanoparticles in PVA aqueous solution were analyzed using the dynamic light scattering technique. Structure and surface properties of membranes were studied using scanning electron microscopy (SEM), atomic force microscopy (AFM) and water contact angle measurements. Membrane performance was investigated in pervaporation dehydration of ethanol/water mixtures in the broad concentration range. It was found that flux of TFN membranes decreased with addition of Al₂O₃·SiO₂ nanoparticles into the selective layer due to the increase in selective layer thickness. However, ethanol/water separation factor of TFN membranes was found to be significantly higher compared to the reference TFC membrane in the whole range of studied ethanol/water feed mixtures with different concentrations, which is attributed to the increase in membrane hydrophilicity. It was found that developed PVA-Al₂O₃·SiO₂/PAN TFN membranes were more stable in the dehydration of ethanol in the whole range of investigated concentrations as well as at different temperatures of the feed mixtures (25 °C, 35 °C, 50 °C) compared to the reference membrane which is due to the additional cross-linking of the selective layer by formation hydrogen and donor-acceptor bonds between aluminosilicate nanoparticles and PVA macromolecules.