Lubrication of soft oral surfaces

Fundamental, mechanism and development of hydration lubrication: From bio-inspiration to artificial manufacturing

Friction and lubrication are ubiquitous in all kinds of movements and play a vital role in the smooth operation of production machinery. Water is indispensable both in the lubrication systems of natural organisms and in hydration lubrication systems. There exists a high degree of similarity between these systems, which has driven the development of hydration lubrication from biomimetic to artificial manufacturing. In particular, significant advancements have been made in the understanding of the mechanisms of hydration lubrication over the past 30 years. This enhanced understanding has further stimulated the exploration of biomimetic inspiration from natural hydration lubrication systems, to develop novel artificial hydration lubrication systems that are cost-effective, easily transportable, and possess excellent capability. This review summarizes the recent experimental and theoretical advances in the understanding of hydration-lubrication processes. The entire paper is divided into three parts. Firstly, surface interactions relevant to hydration lubrication are discussed, encompassing topics such as hydrogen bonding, hydration layer, electric double layer force, hydration force, and Stribeck curve. The second part begins with an introduction to articular cartilage in biomaterial lubrication, discussing its compositional structure and lubrication mechanisms. Subsequently, three major categories of bio-inspired artificial manufacturing lubricating material systems are presented, including hydrogels, polymer brushes (e.g., neutral, positive, negative and zwitterionic brushes), hydration lubricant additives (e.g., nano-particles, polymers, ionic liquids), and their related lubrication mechanism is also described. Finally, the challenges and perspectives for hydration lubrication research and materials development are presented.

Understanding mechanisms behind the oily mouthcoating perception of pure vegetable oils using tribology

Tribology is the science of measuring friction between surfaces. While it has been widely used to investigate texture sensations of food applications, it is seldom applied in pure edible oil systems. In this research, we measured friction, viscosity, and solid fat content (SFC) of nine vegetable oils at 30 and 60°C. Polarized static microscopy was used to assess crystal formation between 60 and 30°C. Descriptive sensory analysis and quantification of oral oil coatings were performed on the oils at 60°C. Expressing the friction factor of oil over the Hersey number (calculated using high sheer-viscosity values) showed no differences in friction between 30 and 60°C, except for shea stearin. Static microscopy revealed crystallization occurred at 30°C for shea stearin, whereas no or few crystals were present for other oils. At 30°C, friction at 1 × 10-2 m/s showed an inverse correlation with SFC (R = -0.95) and with high shear rate viscosity (R = -0.84), as well as an inverse correlation (R = -0.73) with "oily mouthcoating" perception. These results suggest that friction could be a predictor of fat-related perceptions of simple oil systems. Additionally, we hypothesize that the presence of crystals in oils could lower friction via a ball-bearing lubrication mechanism.

A Potentially Ecosustainable Hazelnut/Carob-Based Spread

Commercial cocoa and hazelnut-based sweet spreads typically present a poor nutribiochemical level due to their ingredients and recipes, while nowadays, there is the need of developing sustainable food products addressing both an improved nutritional and environmental profile. The aim of this work was then to develop an innovative hazelnut/carob-based spread with potential high sustainability and nutritional profile, including the exploitation of grape-processing residues (grape skin flour and grapeseed oil) and carob pulp as cocoa surrogate. Rheological (rotational/oscillatory), oxidative, and thermal features of the spread were assessed and compared with two commercial nut-cocoa-based products. Tribology was used to mimic and evaluate the spreads' behavior during oral consumption, and sensory profile (by quantitative descriptive analysis) was also assessed. All products exhibited a pseudoplastic behavior, with the elastic component prevailing over the viscous one. The innovative product showed the highest lubricity from both rheological and sensory analysis, thus well correlating to the obtained lowest viscosity and friction factor trends. Grapeseed oil provided a better nutritional profile, but the largest amount of unsaturated fatty acids promoted oxidation, despite the higher total phenolic content and antioxidant capacity coming from the use of carob and grape skin powders. The sensory perception investigation revealed a characteristic mouthfeel/flavor for the new spread identified having a more fluid consistency and a bitter/sour taste, together with a greater stickiness and a poorer smoothness due to a higher fiber content and solid fat absence.

Flaxseed oleosomes: Responsiveness to physicochemical stresses, tribological shear and storage

This study aimed to extract oleosomes (OLs) from flaxseeds and assess their response to environmental conditions during storage (pH and ionic strengths), shear and tribological stresses. Our hypothesis was that a shear-induced instability will enable OLs to exhibit favourable lubrication performance. During storage, OLs exhibited resistance to droplet aggregation for up to 6 weeks owing to the proteins (3.5-152.8 kDa molecular weights) stabilizing the OL droplets. However, presence of divalent (Ca2+) ions induced destabilization with marked increase in droplet size (p < 0.05). OLs demonstrated shear thinning behaviour, displaying an order of magnitude higher viscosity than flaxseed oil (FSO) at low shear rates (<10 s-1). Strikingly, OLs mirrored the frictional profile of FSO regardless of entrainment speeds, due to droplet coalescence, validating the hypothesis. Such kinetic stability with shear-induced coalescing feature of OLs hold strong potential for future plant-based food development, particularly in achieving desired mouthfeel characteristics.

Astringency and its sub-qualities: a review of astringency mechanisms and methods for measuring saliva lubrication

Astringency is an important mouthfeel attribute that influences the sensory experiences of many food and beverage products. While salivary lubricity loss and increased oral friction were previously believed to be the only astringency mechanisms, recent research has demonstrated that nontactile oral receptors can trigger astringency by responding to astringents without mechanical stimulation. Various human factors have also been identified that affect individual responses to astringents. This article presents a critical review of the key research milestones contributing to the current understanding of astringency mechanisms and the instrumental approaches used to quantify perceived astringency intensity. Although various chemical assays or physical measures mimic in-mouth processes involved in astringent mouthfeel, this review highlights how one chemical or physical approach can only provide a single measure of astringency determined by a specific mechanism. Subsequently, using a single measurement to predict astringency perception is overly idealistic. Astringency has not been quantified beyond the loss of saliva lubrication; therefore, nontactile receptor-based responses must also be explored. An important question remains about whether astringency is a single perception or involves distinct sub-qualities such as pucker, drying, and roughness. Although these sub-quality lexicons have been frequently cited, most studies currently view astringency as a single perception rather than dividing it into sub-qualities and investigating the potentially independent mechanisms of each. Addressing these knowledge gaps should be an important priority for future research.

Machine learning and topological data analysis identify unique features of human papillae in 3D scans

The tongue surface houses a range of papillae that are integral to the mechanics and chemistry of taste and textural sensation. Although gustatory function of papillae is well investigated, the uniqueness of papillae within and across individuals remains elusive. Here, we present the first machine learning framework on 3D microscopic scans of human papillae ([Formula: see text]), uncovering the uniqueness of geometric and topological features of papillae. The finer differences in shapes of papillae are investigated computationally based on a number of features derived from discrete differential geometry and computational topology. Interpretable machine learning techniques show that persistent homology features of the papillae shape are the most effective in predicting the biological variables. Models trained on these features with small volumes of data samples predict the type of papillae with an accuracy of 85%. The papillae type classification models can map the spatial arrangement of filiform and fungiform papillae on a surface. Remarkably, the papillae are found to be distinctive across individuals and an individual can be identified with an accuracy of 48% among the 15 participants from a single papillae. Collectively, this is the first evidence demonstrating that tongue papillae can serve as a unique identifier, and inspires a new research direction for food preferences and oral diagnostics.

Benchmarking of a microgel-reinforced hydrogel-based aqueous lubricant against commercial saliva substitutes

Xerostomia, the subjective sensation of 'dry mouth' affecting at least 1 in 10 adults, predominantly elders, increases life-threatening infections, adversely impacting nutritional status and quality of life. A patented, microgel-reinforced hydrogel-based aqueous lubricant, prepared using either dairy or plant-based proteins, has been demonstrated to offer substantially enhanced lubricity comparable to real human saliva in in vitro experiments. Herein, we present the benchmarking of in vitro lubrication performance of this aqueous lubricant, both in its dairy and vegan formulation against a range of widely available and employed commercial saliva substitutes, latter classified based on their shear rheology into "liquids", "viscous liquids" and "gels", and also had varying extensional properties. Strikingly, the fabricated dairy-based aqueous lubricant offers up to 41-99% more effective boundary lubrication against liquids and viscous liquids, irrespective of topography of the tested dry mouth-mimicking tribological surfaces. Such high lubricity of the fabricated lubricants might be attributed to their limited real-time desorption (7%) from a dry-mouth mimicking hydrophobic surface unlike the tested commercial products including gels (23-58% desorption). This comprehensive benchmarking study therefore paves the way for employing these microgel-based aqueous lubricant formulations as a novel topical platform for dry mouth therapy.

Exploring the textural dynamics of dairy and plant-based yoghurts: A comprehensive study

The mouthfeel and texture of dairy and non-dairy yoghurts play a critical role in food acceptance and liking. The present study aimed to understand the oral perception of commercially available dairy and non-dairy yoghurts. Four dairy and four non-dairy yoghurts with different levels of protein and fat were analyzed to understand the impact of particle size, textural properties and frictional coefficient on the dynamic sensory mouthfeel characteristics measured by the temporal dominance of sensations (TDS) method. Differences in friction coefficients of dairy and non-dairy yoghurts were observed. The friction factor was lower for high-fat dairy yoghurts than for non-dairy yoghurts. The particle size d₉₀ in yoghurts was positively related to graininess perception (r=0.81) and negatively associated with mouthfeel liking (r=-0.87) and overall liking (r=-0.80). For the TDS results, "creaminess" and "thickness" were significantly dominant for dairy yoghurts, while "melty" and "easy to dissolve" were dominant attributes for non-dairy yoghurts. Creaminess perception improves the mouthfeel liking (r=0.72) and overall liking (r=0.59) of yoghurts and is the driver of liking. The findings of this study help understand the intrinsic mouthfeel properties of commercial dairy and non-dairy yoghurts, which will provide valuable insight to product developers during the new product formulation.

Transforming sustainable plant proteins into high performance lubricating microgels

With the resource-intensive meat industry accounting for over 50% of food-linked emissions, plant protein consumption is an inevitable need of the hour. Despite its significance, the key barrier to adoption of plant proteins is their astringent off-sensation, typically associated with high friction and consequently poor lubrication performance. Herein, we demonstrate that by transforming plant proteins into physically cross-linked microgels, it is possible to improve their lubricity remarkably, dependent on their volume fractions, as evidenced by combining tribology using biomimetic tongue-like surface with atomic force microscopy, dynamic light scattering, rheology and adsorption measurements. Experimental findings which are fully supported by numerical modelling reveal that these non-lipidic microgels not only decrease boundary friction by an order of magnitude as compared to native protein but also replicate the lubrication performance of a 20:80 oil/water emulsion. These plant protein microgels offer a much-needed platform to design the next-generation of healthy, palatable and sustainable foods.

Macroscale superlubricity induced by film-forming polymer brush-grafted colloidal additives

HYPOTHESIS

Modifying surfaces with concentrated polymer brushes (CPBs) is an effective way to reduce friction of tribo-pairs lubricated with liquids. We investigate the hypothesis that colloids grafted with CPBs (hybrid colloids) can deposit onto tribo-substrates by varying the solvent quality with respect to the polymer, in order to obtain ultra-low coefficients of friction (CoFs), so-called superlubricity.

EXPERIMENTS

Hybrid colloids are synthesized and characterized, and a dynamic light scattering compares their swellings in aqueous solutions of glycerol or polyethylene glycol. A mini-traction machine with viscoelastic tribo-pairs is used for lubrication experiments. Adsorption of colloids and film structures are tested using a quartz crystal microbalance and an atomic force microscope.

FINDINGS

The solvent controls whether hybrid colloids spontaneously adsorb to the substrate under quiescent conditions or require contact forces to enable (tribo-)deposition. In both cases, the friction in the boundary-mixed lubrication regimes is lower upon increasing the degree of swelling of CPBs and upon increasing coverage of deposited colloids. The greatest lubrication enhancement and surface coverage occur for the spontaneously adsorbed colloids, with ultra-low CoFs of order 10^-3 over a large range of speeds. The results demonstrate the potential for hybrid colloids to be used as solvent dispersible "friction modifier additives".

Frictional behaviour of plant proteins in soft contacts: unveiling nanoscale mechanisms

Despite the significance of nanotribology in the design of functional biomaterials, little is known about nanoscale friction in the presence of protein-coated soft contact surfaces. Here, we report a detailed investigation of frictional behaviour of sustainable plant proteins at the nanoscale for the first time, using deformable bio-relevant surfaces that achieve biologically relevant contact pressures. A combination of atomic force microscopy, quartz crystal microbalance with dissipation monitoring, and friction force microscopy with soft polydimethylsiloxane (PDMS, 150 kPa) surfaces was employed to elucidate the frictional properties of model plant proteins, i.e. lupine, pea, and potato proteins at the nanoscale while systematically varying the pH and ionic strength. Interactions of these plant proteins with purified mucins were also probed. We provide the much-needed direct experimental evidence that the main factor dictating the frictional properties of plant proteins is their affinity towards the surface, followed by the degree of protein film hydration. Proteins with high surface affinity, such as pea and potato protein, have better lubricating performance than lupine at the nanoscale. Other minor factors that drive lubrication are surface interactions between sliding bodies, especially at low load, whilst jamming of the contact area caused by larger protein aggregates increases friction. Novel findings reveal that interactions between plant proteins and mucins lead to superior lubricating properties, by combining high surface affinity from the plant proteins and high hydration by mucins. We anticipate that fundamental understanding gained from this work will set the stage for the design of a plethora of sustainable biomaterials and food with optimum nanolubrication performance.

In vitro oral simulation based on soft contact: The importance of viscoelastic response of the upper jaw substitutes

Real oral processing is the squeezing and shearing between two soft surfaces. The importance of soft palate surface cannot be ignored while focusing on tongue substitutes. Thus the effects of viscoelasticity, roughness of upper jaw substitutes, and fluid rheological properties on lubrication properties were explored by in vitro oral tribology experiments. Different palate substitutes significantly changed the friction curves of pure water, milk, and yogurt. The boundary friction coefficients of pure water and milk are higher under softer or smooth palate substitutes due to stronger viscoelastic responses of friction pairs. Their boundary friction coefficients are lowest at rigid upper jaw substitutes owing to smaller contact angles and deformation. However, the boundary friction coefficient of yogurt is lower owing to its high viscosity, low loss factor, and large particle size under soft friction pairs. In addition, it is highest at rigid palate friction pair because a smaller contact area reduces the entrainment of yogurt, resulting in poor lubricating performance.

Insights into the Multiscale Lubrication Mechanism of Edible Phase Change Materials

Investigation of a lubrication behavior of phase change materials (PCM) can be challenging in applications involving relative motion, e.g., sport (ice skating), food (chocolates), energy (thermal storage), apparel (textiles with PCM), etc. In oral tribology, a phase change often occurs in a sequence of dynamic interactions between the ingested PCM and oral surfaces from a licking stage to a saliva-mixed stage at contact scales spanning micro- (cellular), meso- (papillae), and macroscales. Often the lubrication performance and correlations across length scales and different stages remain poorly understood due to the lack of testing setups mimicking real human tissues. Herein, we bring new insights into lubrication mechanisms of PCM using dark chocolate as an exemplar at a single-papilla (meso)-scale and a full-tongue (macro) scale covering the solid, molten, and saliva-mixed states, uniting highly sophisticated biomimetic oral surfaces with in situ tribomicroscopy for the first time. Unprecedented results from this study supported by transcending lubrication theories reveal how the tribological mechanism in licking shifted from solid fat-dominated lubrication (saliva-poor regime) to aqueous lubrication (saliva-dominant regime), the latter resulted in increasing the coefficient of friction by at least threefold. At the mesoscale, the governing mechanisms were bridging of cocoa butter in between confined cocoa particles and fat coalescence of emulsion droplets for the molten and saliva-mixed states, respectively. At the macroscale, a distinctive hydrodynamic viscous film formed at the interface governing the speed-dependent lubrication behavior indicates the striking importance of multiscale analyses. New tribological insights across different stages and scales of phase transition from this study will inspire rational design of the next generation of PCM and solid particle-containing materials.

Rheology and tribology of chitosan/Acacia gum complex coacervates

Acacia gum (Gum Arabic; GA) and chitosan (CTS) form complex coacervates in acidic environments, providing a polymer-rich aqueous material with interesting bio-lubricant properties. We investigate the interplay of the tribology and rheology of these coacervates, demonstrating that they dramatically reduce the friction coefficient between lubricated soft model surfaces as compared to solutions of the individual polymers. We characterize the phase separation behavior using microscopy, electrophoretic mobility and thermogravimetric analysis. The macroscopic rheological behaviour is predominantly viscous and ranges from weakly to strongly shear thinning: viscosity levels and strength of shear thinning increase with decreasing ionic strength, but no apparent yield stress or predominant elasticity were observed even in the absence of salt. Conversely, friction coefficients measured between soft and rough surfaces increase with a rise in ionic strength and can be scaled onto a Stribeck-type master curve across varying ionic strength and pH in the mixed and hydrodynamic lubrication regimes.

A Method for the Tribological Assessment of Oral Pharmaceutical Liquids

OBEJECTIVE Patient acceptance of pediatric formations is critical to compliance and consequently therapeutic outcomes; thus, having an in vitro method to evaluate sensory perception of pharmaceutical products would be beneficial. The objective of this research is to develop a sensitive and reproducible tribological method to characterize pharmaceutical suspensions at low force and sliding speeds.METHODS The discriminating potential of the method was examined using tribology profiles (coefficient of friction (COF) vs sliding speed) for commercially available products and products made for this study with widely varying sweetness, thickness and grittiness; these formulations were used to judge the sensitivity of the method. Samples were measured using 3M Transpore™ surgical tape to simulate the tongue surface, steel half ring geometry, constant gap setting, target axial force of 2 N in a 600 second exponential ramp for rotation speed.RESULTS The COF ranged from 0.1 to 0.6. For the speeds studied, the high viscosity commercial suspension Ibuprofen Drops and Acetaminophen suspension show a classic Stribeck Curve with an increasing COF at the higher rotation speeds, which indicates these formulations entered the hydrodynamic lubrication phase, while the lower viscosity suspensions only reached the mixed lubrication phase.CONCLUSIONS The contribution of particles seems to affect the COF in a dynamic pattern compared to products that are categorized as either low gritty or high viscosity. These results are important as they provide a potentially rapidly in vitro method for screening pediatric medications and help to identify the factors that affect the palatability of pediatric formulations.

Wine astringency: more than just tannin-protein interactions

Red wines are characterized by their astringency, a very important sensory attribute that affects the perceived quality of wines. Three mechanisms have been proposed to explain astringency, and two theories describe how these mechanisms work in an integrated manner to produce tactile sensations such as drying, roughening, shrinking and puckering. The factors involved include not only tannins and salivary proteins, but also anthocyanins, grape polysaccharides and mannoproteins, as well as other wine matrix components that modulate their interactions. These multifactorial interactions could be responsible for different sensory responses and therefore need to be further studied. This review presents the latest advances in astringency perception and its possible origins, with special attention on the interactions of components, their impact on oral perception and the development of astringency sub-qualities. Future research efforts should concentrate on understanding the mechanisms involved as well as on the limiting factors related to the conformation and stability of the tannin-salivary protein complexes. © 2021 Society of Chemical Industry.

In situ oral lubrication and smoothness sensory perception influenced by tongue surface roughness

BACKGROUND

The human tongue is important in the oral processing of food and in sensory perception. Tongue topography could influence delicate differences in sensory perception. It is hypothesized that tongue surface roughness could alter oral lubrication status and affect perception of smoothness. Fifteen participants with varying levels of tongue surface roughness were recruited and tested. Participants' in situ oral lubrication status without and after consumption of fluid food (milk with varying fat content and maltodextrin solutions with different shear viscosities) was measured. Participants' smoothness sensory scores were also recorded.

RESULTS

The in situ friction coefficient (0.299-1.505) was significantly positively correlated with tongue-surface roughness (54.6-140.0 μm) in all types of test fluid samples across participants. Oral lubrication was significantly decreased when participants consumed the test fluid samples compared with no liquid food consumption, for all test fluid sample types (P < 0.05). No significant differences in in situ friction coefficient were found after participants consumed different test fluid samples, and this was mainly attributed to the limited quantities of fluid residuals in the oral cavity after expectoration. Participants whose tongue surface roughness differed did not exhibit significant differences in smoothness perception with different test fluid samples.

CONCLUSION

Tongue surface roughness has a strong impact on in situ oral lubrication, and fluid food intake reduces in situ oral lubrication significantly. Saliva film and tongue surface roughness might play greater roles in oral lubrication and smoothness sensory perception if fluid is expectorated after consumption. The association between oral physiology and texture perception still needs further elucidation. © 2021 Society of Chemical Industry.

Understanding relations between rheology, tribology, and sensory perception of modified texture foods

The aim of this work was to examine relations between instrumental and sensory parameters in a texture modified food matrix, with and without saliva. Nine pureed carrot samples (eight thickened and a control) were developed with starch (0.4 and 0.8% wt/wt), xanthan (0.2 and 0.4% wt/wt) or starch-xanthan blends that met International Dysphagia Diet Standardisation Initiative (IDDSI) Level 4 guidelines using fork and spoon tests. Rheological and tribological tests were conducted on the food and simulated bolus prepared by adding fresh stimulated saliva to the food (1:5, saliva:food) to mimic oral processing. Perceived sensory properties were identified using a temporal dominance of sensations (TDS) test (n = 16) where panelists were given a list of nine attributes. The area under the curve was extracted from TDS curves for each attribute/sample and this was correlated with rheological (viscosity at 10 s^-1 , G', G″, and tan δ at 1 Hz) and tribological (friction coefficient in three regimes) data. The viscosity of the control sample decreased after adding hydrocolloids (except Starch_0.8%) and with saliva incorporation. G' and G″ either increased or were similar for xanthan and blends and decreased for starch-thickened samples. Hydrocolloid addition increased friction for all samples and was higher with saliva addition. Sensory results showed that samples with starch were perceived as thick and grainy while xanthan was perceived as smooth and slippery. A greater number of sensory attributes correlated with viscoelastic parameters compared to friction coefficients. Correlations were highest with the saliva added samples, further highlighting the importance of including saliva during instrumental testing.

Rheological and tribological characterization of different commercial hazelnut and cocoa-based spreads

Five commercial hazelnut/cocoa spreads with different compositions were tested by rheology/tribology. The impact of each formulation on the structural/lubricant performances was investigated. Rotational/oscillatory rheology was chosen to assess material behavior during flow. Viscosity variation as a function of temperature and chamber geometry was evaluated. Oscillatory mode tests were carried out to obtain information on product viscoelasticity. Tribological analysis was performed at different temperatures aiming at simulating the chewing/swallowing process. All samples were categorized as pseudo-plastic and viscoelastic materials, with the elastic component prevailing over the viscous one. Major differences were detected in terms of consistency index, depending on the total lipid content. Temperature increase enhanced spread fluidity with a decreasing viscosity according to the Arrhenius model (R² > 0.942) and greater values of activation energy reflecting higher sensitivity to microstructural changes. An inverse relationship between Casson viscosity η c and sugar/fat ratio highlighted additional correlations between structural parameters and spread formulation. Tribological measurements at 25°C highlighted that, at the initial eating stage, the friction factor (0.112 - 0.262 at sliding velocity of 8∙10^-6 m/s) was strongly affected by either the amounts of solid fat or hazelnut percentage. Tribological data corroborated the theory for which tribology and rheology cover different domains. This article is protected by copyright. All rights reserved.

Lubrication and Sensory Properties of Emulsion Systems and Effects of Droplet Size Distribution

The functional and sensory properties of food emulsion are thought to be complicated and influenced by many factors, such as the emulsifier, oil/fat mass fraction, and size of oil/fat droplets. In addition, the perceived texture of food emulsion during oral processing is mainly dominated by its rheological and tribological responses. This study investigated the effect of droplet size distribution as well as the content of oil droplets on the lubrication and sensory properties of o/w emulsion systems. Friction curves for reconstituted milk samples (composition: skimmed milk and milk cream) and Casein sodium salt (hereinafter referred to as CSS) stabilized model emulsions (olive oil as oil phase) were obtained using a soft texture analyzer tribometer with a three ball-on-disc setup combined with a soft surfaces (PDMS) tribology system. Sensory discrimination was conducted by 22 participants using an intensity scoring method. Stribeck curve analyses showed that, for reconstituted milk samples with similar rheological properties, increasing the volume fraction of oil/fat droplets in the size range of 1-10 µm will significantly enhance lubrication, while for CSS-stabilized emulsions, the size effect of oil/fat droplets reduced to around 1 µm. Surprisingly, once the size of oil/fat droplets of both systems reached nano size (d₉₀ = 0.3 µm), increasing the oil/fat content gave no further enhancement, and the friction coefficient showed no significant difference (p > 0.05). Results from sensory analysis show that consumers are capable of discriminating emulsions, which vary in oil/fat droplet size and in oil/fat content (p < 0.01). However, it appeared that the discrimination capability of the panelist was significantly reduced for emulsions containing nano-sized droplets.

Water migration, texture and oral processing properties of semi-waxy rice during retrogradation

Semi-waxy rice, a low-amylose content (8%-13%) rice variety, can resist retrogradation. It is becoming more and more popular and widely cultivated in East China where consumers prefer cooked rice with soft and tender texture. In this study, water migration, texture and oral processing properties of cooked rice during retrogradation were investigated in order to characterize semi-waxy rice. The results confirmed that the water mobility and migration of semi-waxy rice during retrogradation is weaker than that of waxy rice and stronger than that of nonwaxy rice. Simultaneously, the hardness of semi-waxy rice was higher than that of waxy rice and lower than that of nonwaxy rice. The oral processing properties confirmed that freshly waxy rice was too adhesive and needed more work to breakdown slow breakdown structure (Type Ⅱ structure) compared to freshly semi-waxy rice. Meanwhile, nonwaxy rice was too hard, and more work was needed to break both fast breakdown structure (Type I structure) and slow breakdown structure (Type Ⅱ structure). The oral processing properties confirmed that retrograded semi-waxy rice generated more reducing sugar than retrograded waxy rice and nonwaxy rice. Thus, semi-waxy rice can retard retrogradation, and the texture of cooked semi-waxy rice is neither too adhesive as waxy rice nor too hard as nonwaxy rice. PRACTICAL APPLICATION: Semi-waxy rice cultivars have been widely cultivated in East China and well accepted by the consumers. This study aims to characterize semi-waxy rice and provide theoretical basis for semi-waxy rice study.

Predicting thickness perception of liquid food products from their non-Newtonian rheology

The "mouthfeel" of food products is a key factor in our perception of food quality and in our appreciation of food products. Extensive research has been performed on what determines mouthfeel, and how it can be linked to laboratory measurements and eventually predicted. This was mainly done on the basis of simple models that do not accurately take the rheology of the food products into account. Here, we show that the subjectively perceived "thickness" of liquid foods, or the force needed to make the sample flow or deform in the mouth, can be directly related to their non-Newtonian rheology. Measuring the shear-thinning rheology and modeling the squeeze flow between the tongue and the palate in the oral cavity allows to predict how a panel perceives soup "thickness". This is done for various liquid bouillons with viscosities ranging from that of water to low-viscous soups and for high-viscous xanthan gum solutions. Our findings show that our tongues, just like our eyes and ears, are logarithmic measuring instruments in agreement with the Weber-Fechner law that predicts a logarithmic relation between stimulus amplitude and perceived strength. Our results pave the way for more accurate prediction of mouthfeel characteristics of liquid food products.

Purified mucins in drug delivery research

One of the main challenges in the field of drug delivery remains the development of strategies to efficiently transport pharmaceuticals across mucus barriers, which regulate the passage and retention of molecules and particles in all luminal spaces of the body. A thorough understanding of the molecular mechanisms, which govern such selective permeability, is key for achieving efficient translocation of drugs and drug carriers. For this purpose, model systems based on purified mucins can contribute valuable information. In this review, we summarize advances that were made in the field of drug delivery research with such mucin-based model systems: First, we give an overview of mucin purification procedures and discuss the suitability of model systems reconstituted from purified mucins to mimic native mucus. Then, we summarize techniques to study mucin binding. Finally, we highlight approaches that made use of mucins as building blocks for drug delivery platforms or employ mucins as active compounds.

Correlation between surface friction and the hydrophobicity of structure-related side-chain exposure of albumin on contact lens

The management of contact lens discomfort remains a challenge leading to the increased contact lens dropout rates. Tear protein accumulates on the lens surfaces with different configurations observed are correlated to the lens friction, with the improved comfort experienced by reduced surface friction in the eye. However, protein adsorption is a complex process with the combined protein-protein interactions (PPI) and protein-surface interactions (PSI) involved, which is difficult to explain the complicated tribological behavior in terms of protein structural shifts alone on lens surfaces. On the other hand, the type of solvent-exposed side chains from specific protein conformations on lens surfaces should be more important to the lens friction involved. We aim to investigate the correlation between the structure-related side-chain exposure and corresponding lens friction of adsorbed tear proteins on lens surfaces under varied PPI and PSI. Albumin was the model protein adsorbed onto the conventional lens material. Such as polymethylmethacrylate (PMMA) or the poly-2-hydroxyethyl methacrylate (PHEMA) surfaces applied here. Adsorption was conducted under varying protein solution concentrations to saturate the model surface to change the PPI effects over a wide range. Our results indicate that PPI effects help stabilize protein structures on both surfaces. When PPI is minimized, a distinct correlation was observed between the surface friction and the hydrophobicity of structure-related side-chain exposure of albumin on lens surfaces depending on the different PSI involved. At a fundamental understanding, our results would provide insights for developing new lens materials or the lens care solution designs to reduce the lens discomfort.

Forgotten but not gone: Particulate matter as contaminations of mucosal systems

A decade ago, environmental issues, such as air pollution and the contamination of the oceans with microplastic, were prominently communicated in the media. However, these days, political topics, as well as the ongoing COVID-19 pandemic, have clearly taken over. In spite of this shift in focus regarding media representation, researchers have made progress in evaluating the possible health risks associated with particulate contaminations present in water and air. In this review article, we summarize recent efforts that establish a clear link between the increasing occurrence of certain pathological conditions and the exposure of humans (or animals) to airborne or waterborne particulate matter. First, we give an overview of the physiological functions mucus has to fulfill in humans and animals, and we discuss different sources of particulate matter. We then highlight parameters that govern particle toxicity and summarize our current knowledge of how an exposure to particulate matter can be related to dysfunctions of mucosal systems. Last, we outline how biophysical tools and methods can help researchers to obtain a better understanding of how particulate matter may affect human health. As we discuss here, recent research has made it quite clear that the structure and functions of those mucosal systems are sensitive toward particulate contaminations. Yet, our mechanistic understanding of how (and which) nano- and microparticles can compromise human health via interacting with mucosal barriers is far from complete.

Effects of a Multifaceted Intervention Program on the Eating Ability of Nursing Home Residents

Oropharyngeal dysphagia is a common problem for nursing home residents that leads to aspiration pneumonia and malnutrition. Musculature surrounding head and neck and tongue strength are crucial for safe and efficient oropharyngeal swallowing. Oral hygiene facilitates the smooth swallowing. The aim of this study was thus to investigate the effects of a multifaceted intervention program which combines the interactive oral activities, tongue strength training and oral cleaning procedure on the eating ability of nursing home residents. A sequential, multiple time series, single-group quasi-experimental research design was used, and 41 residents were recruited to participate in this study. The study was divided into three phases, each lasting two months. In phase 1, the participants were conducting their usual activities, except that the outcome variables were measured on five occasions to obtain baseline data. Phase 2 was a two-month washout period, and phase 3 was the intervention period. Thirty-six residents completed phase 1, and 34 residents completed the phase 3 intervention period. The eight-week phase 3 intervention program comprised three sessions per day, conducted seven days a week, with each session lasting 15–20 min. Outcome variables were measured at weeks 0, 2, 4, 6, and 8 in phases 1 and 3 to evaluate the feasibility of the program. Following the intervention program, controlling for baseline differences, the patients’ tongue strength, food consumption, mealtime duration, oral health, and dysphagia severity were significantly improved in phase 3 relative to phase 1. These improvements lasted through to at least 2 months posttest. The study illustrates that this multifaceted intervention program may be an effective approach for improving the eating ability of nursing home residents.

Effects of oral lubrication on satiety, satiation and salivary biomarkers in model foods: A pilot study

With a dramatic increase in overweight and population with obesity over the last decades, there is an imminent need to tackle this issue using novel strategies. Addressing obesity issues by generating satiety in food to reduce energy intake has been one of those prominent strategies and often textural interventions have been used to generate satiety, specifically in short-term trials. This study aimed to investigate the role of preloads varying in their oral lubricating properties on appetite sensations, food intake, salivary friction and concentration of salivary biomarkers (proteins, α-amylase and mucins) in collected human saliva (n = 17 healthy participants). The preloads were model foods (flavoured hydrogels) either high or low in their lubricating properties, assessed both by instrumental and sensorial measurements. The results showed that hunger and desire to eat decreased immediately after preload and remained decreased for 10 and 20 min, respectively, after preload in the high lubricating condition compared to control (all p < 0.05). Fullness increased immediately after preload and remained increased for 10 and 20 min, respectively, after preload in high lubricating condition compared to control (p < 0.05). However, after controlling the values for baseline, such significant effect of the intervention did not exist anymore. Only the effect of time is observed. Consuming high lubricating hydrogels showed no effect on food intake and salivary biomarkers in this pilot study. Salivary lubrication correlated with feeling of fullness. Considering the issue of large time-interval (30 min) between preload and next meal in this study, it is worthwhile investigating the immediate effects of oral lubrication on appetite control, food intake and salivary biomarkers.

Recent Progress in Cartilage Lubrication

Healthy articular cartilage, covering the ends of bones in major joints such as hips and knees, presents the most efficiently-lubricated surface known in nature, with friction coefficients as low as 0.001 up to physiologically high pressures. Such low friction is indeed essential for its well-being. It minimizes wear-and-tear and hence the cartilage degradation associated with osteoarthritis, the most common joint disease, and, by reducing shear stress on the mechanotransductive, cartilage-embedded chondrocytes (the only cell type in the cartilage), it regulates their function to maintain homeostasis. Understanding the origins of such low friction of the articular cartilage, therefore, is of major importance in order to alleviate disease symptoms, and slow or even reverse its breakdown. This progress report considers the relation between frictional behavior and the cellular mechanical environment in the cartilage, then reviews the mechanism of lubrication in the joints, in particular focusing on boundary lubrication. Following recent advances based on hydration lubrication, a proposed synergy between different molecular components of the synovial joints, acting together in enabling the low friction, has been proposed. Additionally, recent development of natural and bio-inspired lubricants is reviewed.

Protein-saliva interactions: a systematic review

Food industries are challenged to reformulate foods and beverages with higher protein contents to lower fat and sugar content. However, increasing protein concentration can reduce sensory acceptability due to astringency perception. Since the properties of food-saliva mixtures govern mouthfeel perception, understanding how saliva and protein interact is key to guide development of future protein-rich reformulations with optimal sensory attributes. Hence, this systematic review investigated protein-saliva interaction using both model and real human saliva, including a quality assessment. A literature search of five databases (Medline, Pubmed, Embase, Scopus and Web of Science) was undertaken covering the last 20 years, yielding 36 604 articles. Using pre-defined criteria, this was reduced to a set of 33 articles with bulk protein solutions (n = 17), protein-stabilized emulsions (n = 13) and protein-rich food systems (n = 4). Interaction of dairy proteins, lysozyme and gelatine with model or human saliva dominated the literature. The pH was shown to have a strong effect on electrostatic interaction of proteins with negatively-charged salivary mucins, with greater interactions occurring below the isoelectric point of proteins. The effect of protein concentration was unclear due to the limited range of concentrations being studied. Most studies employed a 1 : 1 w/w protein : saliva ratio, which is not representative of true oral conditions. The interaction between protein and saliva appears to affect mouthfeel through aggregation and increased friction. The searches identified a gap in research on plant proteins. Accurate simulation of in vivo oral conditions should clarify understanding of protein-saliva interaction and its influence on sensory perception.

Multi-Analytical Framework to Assess the In Vitro Swallowability of Solid Oral Dosage Forms Targeting Patient Acceptability and Adherence

A lack of effective intervention in addressing patient non-adherence and the acceptability of solid oral dosage forms combined with the clinical consequences of swallowing problems in an ageing world population highlight the need for developing methods to study the swallowability of tablets. Due to the absence of suitable techniques, this study developed various in vitro analytical tools to assess physical properties governing the swallowing process of tablets by mimicking static and dynamic stages of time-independent oral transitioning events. Non-anatomical models with oral mucosa-mimicking surfaces were developed to assess the swallowability of tablets; an SLA 3D printed in vitro oral apparatus derived the coefficient of sliding friction and a friction sledge for a modified tensometer measured the shear adhesion profile. Film coat hydration and in vitro wettability was evaluated using a high-speed recording camera that provided quantitative measurements of micro-thickness changes, simulating static in vivo tablet–mucosa oral processing stages with artificial saliva. In order to ascertain the discriminatory power and validate the multianalytical framework, a range of commonly available tablet coating solutions and new compositions developed in our lab were comparatively evaluated according to a quantitative swallowability index that describes the mathematical relationship between the critical physical forces governing swallowability. This study showed that the absence of a film coat significantly impeded the ease of tablet gliding properties and formed chalky residues caused by immediate tablet surface erosion. Novel gelatin- and λ-carrageenan-based film coats exhibited an enhanced lubricity, lesser resistance to tangential motion, and reduced stickiness than polyvinyl alcohol (PVA)–PEG graft copolymer, hydroxypropyl methylcellulose (HPMC), and PVA-coated tablets; however, Opadry^® EZ possessed the lowest friction–adhesion profile at 1.53 a.u., with the lowest work of adhesion profile at 1.28 J/mm². For the first time, the in vitro analytical framework in this study provides a fast, cost-effective, and repeatable swallowability ranking method to screen the in vitro swallowability of solid oral medicines in an effort to aid formulators and the pharmaceutical industry to develop easy-to-swallow formulations.