Silane modified fumed silicas and their behaviours in water: Influence of grafting ratio and temperature

Surroundings effects on the interfacial and temperature behaviors of NaOH/water bound to hydrophilic and hydrophobic nanosilicas

HYPOTHESIS

It has been assumed that the temperature and interfacial behaviors of concentrated alkali solutions under confined space effects may depend on adsorbent surface structure, hydrophilicity/hydrophobicity, porosity of solids, and dispersion media properties causing kosmotropic or chaotropic effects onto hydrogen bond network (HBN) in bound water and NaOH solution.

EXPERIMENTS

To analyze these effects, systems with NaOH/water (0.1 g/g/0.1 g/g) deposited onto compacted hydrophilic (A-300) and hydrophobic (AM1) nanosilicas were studied using ¹H NMR spectroscopy (215-287 K). The materials were characterized using several experimental and theoretical methods.

FINDINGS

It has been shown that bound water and water/NaOH represent various clusters and domains whose characteristics depend strongly on nanosilica hydrophilicity/hydrophobicity, dispersion media (air, CDCl₃, DMSO, CDCl₃/DMSO), subsequent or simultaneous deposition of NaOH and water, and temperature. Water amount (0.1 g/g) was selected too small to completely dissolve NaOH (0.1 g/g) under confined space effects and low temperatures. Chaotropic hydrophobic AM1 and CDCl₃ enhance water clusterization and HBN disorder (weakly associated water, WAW appears) in contrast to kosmotropic hydrophilic A-300, NaOH, and DMSO reducing the clusterization and HBN disorder in bound water (WAW disappears). Several aspects related to the interfacial and temperature behaviors of water and co-adsorbates bound to the nanosilicas were elucidated.

Multifunctional Role of Silica in Pharmaceutical Formulations

Due to the high surface area, adjustable surface and pore structures, and excellent biocompatibility, nano- and micro-sized silica have certainly attracted the attention of many researchers in the medical fields. This review focuses on the multifunctional roles of silica in different pharmaceutical formulations including solid preparations, liquid drugs, and advanced drug delivery systems. For traditional solid preparations, it can improve compactibility and flowability, promote disintegration, adjust hygroscopicity, and prevent excessive adhesion. As for liquid drugs and preparations, like volatile oil, ethers, vitamins, and self-emulsifying drug delivery systems, silica with adjustable pore structures is a good adsorbent for solidification. Also, silica with various particle sizes, surface characteristics, pore structure, and surface modification controlled by different synthesis methods has gained wide attention owing to its unparalleled advantages for drug delivery and disease diagnosis. We also collate the latest pharmaceutical applications of silica sorted out by formulations. Finally, we point out the thorny issues for application and survey future trends pertaining to silica in an effort to provide a comprehensive overview of its future development in the medical fields. Graphical Abstract.

Constructing a Multiple Covalent Interface and Isolating a Dispersed Structure in Silica/Rubber Nanocomposites with Excellent Dynamic Performance

Realizing and manipulating a fine dispersion of silica nanoparticles (NPs) in the polymer matrix is always a great challenge. In this work, we first successfully synthesized N, N'-bis[3-(triethoxysilyl)propyl-isopropanol]-propane-1,3-diamine (TSPD), which was a new interface modifier, aiming to promote the dispersion of silica NPs. Through Fourier transform infrared spectroscopy, nuclear magnetic resonance analysis, and mass spectroscopy, we verified that TSPD contains together six ethoxy groups at its two ends. Then, we used this TSPD to modify the pure silica NPs, and this modified silica was abbreviated as D-MS, which is realized by the thermal gravimetric analysis examination, scanning electron microscopy analysis, and dynamic light scattering results. It was clearly observed that D-MS NPs are connected to one another but are not conglutinated tightly, exhibiting a novel predispersed structure with around 1-2 nm certain extent of interparticle distance. Next, we fabricated the following four elastomer nanocomposites such as pure silica/natural rubber (NR) composite (PS-NR), D-MS/NR composite (DMS-NR), bis-(γ-triethoxysilylpropyl)-tetrasulfide (TESPT)-modified silica/NR composite (TS-NR), and TESPT-modified D-MS/NR composite (T&DMS-NR) and found that the Payne effect is the smallest for T&DMS-NR via the combination use of the D-MS and the traditional coupling agent TESPT, which is attributed to its best dispersion state evidenced by the transmission electron microscopy results. Moreover, by measuring a series of other important mechanical performances such as the stress-strain curve, the dynamic strain dependence of the loss factor, and the heat build-up, we concluded that the T&DMS-NR system greatly exceeds those of the three other rubber composites. In general, this new approach provides a good opportunity to prepare a silica/rubber composite with excellent properties in mechanical strength and dynamic behavior by tailoring the fine dispersion of NPs.

How silanization influences aggregation and moisture sorption behaviours of silanized silica: analysis of porosity and multilayer moisture adsorption

Based on the results of nitrogen adsorption and dynamic vapour sorption as well as analysis by the Hailwood-Horrobin (H-H) model, the effects of γ-methacryloxypropyltrimethoxysilane (MPTS) on the agglomeration and moisture sorption properties of fumed silica particles were investigated. After adding various concentrations (2%, 4%, 6% and 8%) of MPTS, different degrees of silanization were obtained by showing various ─OH group contents on the silica surface, which resulted in silica agglomerates with different porous structures. The bigger mesopores in the unmodified silica agglomerates became smaller and finally disappeared after MPTS modification and the Bruanuer-Emmett-Teller surface area decreased more gradually with an increase in MPTS concentration. The H-H model fitted the sorption isotherms very well, and both hydrated water and dissolved water showed decreasing trends with the increase in MPTS concentration, showing reduced hygroscopicity. Up to 6% MPTS, the ─OH groups decreased with increasing MPTS concentration, as indicated by reduced K_h and W parameters, while at 8% MPTS an extensive self-condensation of MPTS occurred. Adsorption hysteresis appeared for moisture sorption on silanized silica, especially at low relative humidity values and at low MPTS concentrations, which could be explained by a synergistic effect of the surface ─OH group content and pore characteristics. These results could aid our understanding of the applications of silane-modified silica particles.

Silica Modified by Alcohol Polyoxyethylene Ether and Silane Coupling Agent Together to Achieve High Performance Rubber Composites Using the Latex Compounding Method

The study of preparing silica/rubber composites used in tires with low rolling resistance in an energy-saving method is fast-growing. In this study, a novel strategy is proposed, in which silica was modified by combing alcohol polyoxyethylene ether (AEO) and 3-mercaptopropyltriethoxysilane (K-MEPTS) for preparing silica/natural rubber (NR) master batches. A thermal gravimetric analyzer and Raman spectroscopy results indicated that both AEO and K-MEPTS could be grafted on to the silica surface, and AEO has a chance to shield the mercaptopropyl group on K-MEPTS. Silica modified by AEO and K-MEPTS together was completely co-coagulated with the rubber in preparing silica/NR composites using the latex compounding method with the help of the interaction between AEO and K-MEPTS. The performance of composites prepared by silica/NR master batches was investigated by a rubber process analyzer (RPA), transmission electron microscopy (TEM) and a tensile tester. These results demonstrate that AEO forms a physical interface between silica and rubber, resulting in good silica dispersion in the matrix. K-MEPTS forms a chemical interface between silica and rubber, enhancing the reinforcing effect of silica and reducing the mutual friction between silica particles. In summary, using a proper combination of AEO and K-MEPTS is a user-friendly approach for preparing silica/NR composites with excellent performance.