Self-assembly control via molecular recognition: Effect of cyclodextrins on surfactant micelle structure and interactions determined by SANS

Structure of Cellulose Ether Affected by Ionic Surfactant and Solvent: A Small-Angle Neutron Scattering Investigation

Polysaccharides and their derivatives are commonly used in pharmaceutical and agricultural formulations as rheology modifiers. Their performance is related to their conformation in solution, which in turn is affected by other ingredients present in the formulation. This study focuses on modulating the conformation of relatively rigid cellulose chains in aqueous solutions. In particular, we have investigated the nonionic cellulose derivative ethyl(hydroxyethyl)cellulose (EHEC) in water in the presence of the ionic surfactant sodium dodecyl sulfate (SDS) and/or ethanol acting as modulating agents. We have used small angle neutron scattering (SANS) with contrast variation to determine the EHEC chain conformation in the presence of (but not masked by) ethanol and SDS. In dilute and semidilute aqueous solutions, EHEC exhibits worm-like chain conformation due to the rigid cellulose backbone. Addition of ethanol does not impact the polymer conformation to a great extent. Addition of SDS alters the EHEC chain conformation, resulting in polyelectrolyte-like scattering behavior due to repulsive interactions between bound charged micelles which show similar structure as the free SDS micelles in solution (in the absence of polymers). Ethanol affects the polymer + surfactant system primarily by acting on the surfactant (bound on polymer) which, in turn, affects the polymer conformation. At higher ethanol concentrations (20 wt %), EHEC regains the worm-like chain conformation because of the detachment of the bound SDS micelles. To the best of our knowledge, this is the only study providing details on chain conformation of the rigid polymer EHEC in dilute or semidilute aqueous solutions in the presence of surfactant and alcohol and one of very few papers utilizing SANS for the characterization of polymer + surfactant + water + alcohol interactions. Such fundamental understanding of interactions and structure in multicomponent mixtures supports the design of industrial formulations.

Structure and composition of mixed micelles formed by nonionic block copolymers and ionic surfactants in water determined by small-angle neutron scattering with contrast variation

HYPOTHESIS

Complex fluids comprising polymers and surfactants exhibit interesting properties which depend on the overall composition and solvent quality. The ultimate determinants of the macroscopic properties are the nano-scale association domains. Hence it is important to ascertain the structure and composition of the domains, and how they respond to the overall composition.

EXPERIMENTS

The structure and composition of mixed micelles formed in aqueous solution between poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers (Pluronics or Poloxamers) and the ionic surfactant sodium dodecylsulfate (SDS) are determined from an analysis of small-angle neutron scattering (SANS) intensity data obtained at different contrasts. Different polymers and concentrations have been probed.

FINDINGS

The SDS + Pluronic mixed micelles include polymer and some water in the micelle core that is formed primarily by alkyl chains. This is different than what was previously reported, but is consistent with a variety of experimental observations. This is the first report on the structure of SDS + Pluronic P123 (EO₁₉PO₆₉EO₁₉) assemblies. The effects on the mixed micelle structure and composition of the surfactant concentration and the polymer hydrophobicity are discussed here in the context of interactions between the different components.

Metal Oxide-Related Dendritic Structures: Self-Assembly and Applications for Sensor, Catalysis, Energy Conversion and Beyond

In the past two decades, we have learned a great deal about self-assembly of dendritic metal oxide structures, partially inspired by the nanostructures mimicking the aesthetic hierarchical structures of ferns and corals. The self-assembly process involves either anisotropic polycondensation or molecular recognition mechanisms. The major driving force for research in this field is due to the wide variety of applications in addition to the unique structures and properties of these dendritic nanostructures. Our purpose of this minireview is twofold: (1) to showcase what we have learned so far about how the self-assembly process occurs; and (2) to encourage people to use this type of material for drug delivery, renewable energy conversion and storage, biomaterials, and electronic noses.

Molecular Recognition of Fluorescent Probe Molecules with a Pseudopolyrotaxane Nanosheet

Pseudopolyrotaxane nanosheets (PPRNS) are ultrathin two-dimensional (2D) materials fabricated via supramolecular self-assembly of β-cyclodextrin (β-CD) and poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) triblock copolymers. In this study, the molecular loading of various fluorescent probe molecules onto PPRNS was systematically investigated. ¹H NMR study for R6G absorption to PPRNS indicated that the small hydrophobic groups, such as the methyl group, of R6G were absorbed by PPRNS. Consistently, the fluorescent probes without methyl groups were not absorbed. These results indicate that PPRNS has a molecular recognition absorption property based on the host-guest interaction of the functional groups on probe molecules and molecular-sized spaces of PPRNS surfaces, which may be vacant β-CDs and voids between β-CD columns. The absorbed amount of the molecular probes onto PPRNS was investigated by UV-vis spectra, and the absorption behavior could be described well by the Langmuir absorption isotherm. This is consistent with the suggested model that the probes are absorbed onto the PPRNS surfaces. This study demonstrates that PPRNSs can be applied as adsorbents for toxic compounds, drug delivery systems, and 2D sensors.

Kolliphor® HS 15-cyclodextrin Complex for the Delivery of Voriconazole: Preparation, Characterization, and Antifungal Activity

BACKGROUND

This study aimed to reduce the amount of sulfobutylether-β-cyclodextrin (SBECD) used in the marketed voriconazole injections to meet the clinical needs of patients with moderate-to-severe renal impairment (creatinine clearance rate <50 mL/min).

OBJECTIVE

This study found that the surfactant Kolliphor® HS 15 (HS 15) and SBECD had significant synergistic effects on solubilizing voriconazole, and a novel voriconazole complex delivery system (VRC-CD/HS 15) was established.

METHODS

The complex system was characterized, and its antifungal activity was studied by dynamic light scattering, dialysis bag method, disk diffusion, and broth microdilution.

RESULTS

Compared with the control, its encapsulation efficiency (90.07±0.48%), drug loading (7.37±0.25%) and zeta potential (-4.36±1.37 mV) were increased by 1.54%, 41.19%, and 296.36%, respectively; its average particle size (13.92±0.00 nm) was reduced by 15.69%, so the complex system had better stability. Simultaneously, its drug release behavior was similar to that of the control, and it was a first-order kinetic model. Antifungal studies indicated that the complex system had noticeable antifungal effects. With the increase of drug concentration, the inhibition zone increased. The minimum inhibitory concentrations of the complex system against Cryptococcus neoformans, Aspergillus niger and Candida albicans were 0.0313 μg/mL, 1 μg/mL and 128 μg/mL, respectively.

CONCLUSION

It showed a significant inhibitory effect on C. neoformans and had a visible therapeutic effect on Kunming mice infected with C. neoformans. Consequently, VRC-CD/HS 15 had better physicochemical properties and still had an apparent antifungal effect, and was promising as a potential alternative drug for clinical application.

Controlled Formation of Hydrated Micelles by the Intervention of Cyclodextrins

The interaction between surfactants and cyclodextrins (CDs) is well known. Studies have focused mainly on destruction of micelles with CDs to release the encapsulated drugs. However, less emphasis has been given on understanding the formation of micelles with the CD encapsulated surfactants. We have used fluorescence spectroscopy to study the impact of CDs on micelles using a fluorophore that has been tactically designed as a reporter. This molecule has a pyrene moiety on one end and a cationic head group on the other so that the orientation of the compound can be prefixed on micelle formation in aqueous environment. We have observed that the CD encapsulated surfactants can form "hydrated micelles" that allow extensive penetration of water molecules toward the core. The mechanism for such a process involves inclusion of the hydrophobic surfactant tails within the CD core and participation of these inclusion complexes in micelle formation. The process could be controlled by tuning the concentration of CD. The degree of hydration varies as the micelles get more opened up due to the residence of the CDs inside them.

Role of chemical additives and their rheological properties in enhanced oil recovery

A significant amount of oil (i.e. 60–70%) remains trapped in reservoirs after the conventional primary and secondary methods of oil recovery. Enhanced oil recovery (EOR) methods are therefore necessary to recover the major fraction of unrecovered trapped oil from reservoirs to meet the present-day energy demands. The chemical EOR method is one of the promising methods where various chemical additives, such as alkalis, surfactants, polymer, and the combination of all alkali–surfactant–polymer (ASP) or surfactant–polymer (SP) solutions, are injected into the reservoir to improve the displacement and sweep efficiency. Every oil field has different conditions, which imposes new challenges toward alternative but more effective EOR techniques. Among such attractive alternative additives are polymeric surfactants, natural surfactants, nanoparticles, and self-assembled polymer systems for EOR. In this paper, water-soluble chemical additives such as alkalis, surfactants, polymer, and ASP or SP solution for chemical EOR are highlighted. This review also discusses the concepts and techniques related to the chemical methods of EOR, and highlights the rheological properties of the chemicals involved in the efficiency of EOR methods.

Differential behavior of sodium laurylsulfate micelles in the presence of nonionic polymers

HYPOTHESIS

Theory and practice have proven that the cleansing properties and irritation potential of surfactants can be controlled with the addition of co-surfactants or polymers. The size of the surfactant-polymer nanoassembly, which differs from the pure surfactant micelle, has been postulated to be the cause of the differences in a surfactant system's ability to disrupt the skin barrier. However, a firm structure-function relationship connecting polymer and surfactant under a consumer relevant condition is yet to be established. It is therefore hypothesized that apart from the size, the shape and the chemical nature of the polymer might play crucial roles.

EXPERIMENTS

We used combined small-angle neutron scattering, nuclear magnetic resonance spectroscopy, tensiometry, and dye solubilization methods to investigate the shape, size, and intermolecular interactions involved in sodium laurylsulfate-based systems in the presence of two industrially important and chemically distinct polymers, polyethylene glycol and polyvinyl alcohol, adopting a consumer relevant protocol.

FINDINGS

Apart from size, shape and inter-micellar interactions fine-tuned by the presence of the polymers are found to be the important factors. Secondly, the physicochemical property of the polymer including chemical structure, conformation, hydrophilicity, presence of side groups, all can have crucial influence on polymer-surfactant interaction, micelle formation, and micelle stability.

Adsorption of poly(ethylene oxide)-containing amphiphilic polymers on solid-liquid interfaces: Fundamentals and applications

The adsorption of amphiphilic molecules of varying size on solid-liquid interfaces modulates the properties of colloidal systems. Nonionic, poly(ethylene oxide) (PEO)-based amphiphilic molecules are particularly useful because of their graded hydrophobic-hydrophilic nature, which allows for adsorption on a wide array of solid surfaces. Their adsorption also results in other useful properties, such as responsiveness to external stimuli and solubilization of hydrophobic compounds. This review focuses on the adsorption properties of PEO-based amphiphiles, beginning with a discussion of fundamental concepts pertaining to the adsorption of macromolecules on solid-liquid interfaces, and more specifically the adsorption of PEO homopolymers. The main portion of the review highlights studies on factors affecting the adsorption and surface self-assembly of PEO-PPO-PEO block copolymers, where PPO is poly(propylene oxide). Block copolymers of this type are commercially available and of interest in several fields, due to their low toxicity and compatibility in aqueous systems. Examples of applications relevant to the interfacial behavior of PEO-PPO-PEO block copolymers are paints and coatings, detergents, filtration, and drug delivery. The methods discussed herein for manipulating the adsorption properties of PEO-PPO-PEO are emphasized for their ability to shed light on molecular interactions at interfaces. Knowledge of these interactions guides the formulation of novel materials with useful mesoscale organization and micro- and macrophase properties.